Kurz Catalogue.pdf - Stratmed.co.za

More documents

Recommendations

Info

2.6 mm Duesseldorf Type Titanium Prostheses BELL (partial) and AERIAL (total) The first KURZ ® titanium prosthesis was designed in 1994 in conjunction with doctors of the Dominikus Hospital in Duesseldorf. lt was based on the years of experience KURZ had in designing and producing other prostheses. The superiority of these new implants compared to previous middle ear prostheses with respect to biocompatibility, hearing improvement and intraoperative manipulation became evident even in the testing phase. From a long-term perspective, the prostheses have proven themselves, especially in regard to its reliability and safety. Benefits: • Small mass for good sound transmission • Careful weight balance results in efficient intraoperative handling • Large surface contact with the tympanic membrane or transplant prevents tilting • Partially roughened surface stabilizes prosthesis placement • Excellent biocompatibility for irritant-free integration into the middle ear • Individual shape adaptation through simple bending • Well documented by scientific studies 3.6 mm Length: (L) REF 2.6 mm 3.00 mm 3.25 mm 1004 034 1004 035 3.6 mm Length: (L) Functional Length: (FL) REF L 3.50 mm 3.75 mm 1004 036 1004 037 1.75 mm 0.75 mm 1002 023 4.00 mm 1004 038 L Duesseldorf Type BELL (Partial) Material: Pure Titanium (ASTM F67 Medical Grade) Shaft Diameter: 0.2 mm 2.00 mm 2.25 mm 2.50 mm 2.75 mm 3.00 mm 3.25 mm 3.50 mm 4.00 mm 4.50 mm 1.00 mm 1.25 mm 1.50 mm 1.75 mm 2.00 mm 2.25 mm 2.50 mm 3.00 mm 3.50 mm 1002 024 1002 025 1002 026 1002 027 1002 028 1002 029 1002 030 1002 032 1002 033 Duesseldorf Type AERIAL (Total) Material: Pure Titanium (ASTM F67 Medical Grade) Shaft Diameter: 0.2 mm This prosthesis is compatible with the Ω CONNECTOR (REF 1004 930). 4.25 mm 4.50 mm 4.75 mm 5.00 mm 5.25 mm 5.50 mm 6.00 mm 6.50 mm 7.00 mm 1004 039 1004 040 1004 041 1004 042 1004 043 1004 044 1004 046 1004 048 1004 049 Special lengths upon request. 10 Heinz Kurz GmbH, Dusslingen, Germany 0124 04/10
Malleus Notch Prostheses (MNP) With this development, KURZ responds to surgeons’ requests for a titanium prosthesis that combines the favored open design of the headplate with a notch for placement under the malleus. The malleus is often preserved in ears with chronic otitis media and surgeons like to have the option of placing the ossicular prosthesis under the malleus. The Partial and Total MNP prostheses with malleus notch (Yung Design) were developed to combine the benefit of an open headplate with a notch to cradle the malleus. Comparing the user-friendliness of the MNP with conventional HA notched implants, most surgeons in a study at the Ipswich Hospital NHS Trust, UK, preferred the open design in the Titanium headplate. It provides a better view of the bottom end of the shaft and facilitates prosthesis manipulation with micro-instruments. Middle ear surgeons generally regard the user-friendliness of a prosthesis during placement as the more critical and difficult aspect of the procedure. Benefits: • Notch headplate eliminates intraoperative implant bending for malleus adjustment • Proven prosthesis design for a secure connection to the malleus handle • Excellent biocompatibility 3.7 mm 2.2 mm Length: (L) 3.00 mm REF 1004 434 • Ultra light weight • The open headplate design facilitates implant placement and handling L 3.25 mm 1004 435 3.50 mm 1004 436 3.75 mm 1004 437 MNP Total Prosthesis Material: Pure Titanium (ASTM F67) Medical Grade Shaft Diameter: 0.2 mm 4.00 mm 4.25 mm 4.50 mm 4.75 mm 5.00 mm 1004 438 1004 439 1004 440 1004 441 1004 442 L 3.7 mm 2.2 mm Length: (L) 1.75 mm 2.00 mm 2.25 mm Functional Length: (FL) 0.75 mm 1.00 mm 1.25 mm REF 1002 423 1002 424 1002 425 This prosthesis is compatible with the Ω CONNECTOR (REF 1004 930). 5.25 mm 5.50 mm 6.00 mm 6.50 mm 7.00 mm 1004 443 1004 444 1004 446 1004 448 1004 449 MNP Partial Prosthesis Material: Pure Titanium (ASTM F67) Medical Grade Shaft Diameter: 0.2 mm 2.50 mm 2.75 mm 3.00 mm 3.25 mm 3.50 mm 1.50 mm 1.75 mm 2.00 mm 2.25 mm 2.50 mm 1002 426 1002 427 1002 428 1002 429 1002 430 04/10 Heinz Kurz GmbH, Dusslingen, Germany 0124 11
Page 1 and 2: Otology 5th Edition
Page 3 and 4: Contents KURZ ® Middle Ear Prosthe
Page 5 and 6: Pure Titanium (ASTM F67): Chemical
Page 7 and 8: Overview Variable Length TTP-VARIAC
Page 9 and 10: TTP-VARIAC TM System Handling and A
Page 11: 2.6 mm TTP TM -Tuebingen Type Titan
Page 15 and 16: Regensburg Type Titanium Total Pros
Page 17 and 18: CliP ® Partial Prosthesis Dresden
Page 19 and 20: Angular Prosthesis Plester Titanium
Page 21 and 22: 04/10 19
Page 23 and 24: Overview K-Piston Stapes Prosthesis
Page 25 and 26: Soft CliP ® Titanium Stapes Prosth
Page 27 and 28: CliP ® Piston MVP Haeusler Design
Page 29 and 30: 04/10 27
Page 31 and 32: Overview Tuebingen Type Ventilation
Page 33 and 34: Ventilation Tubes With Eyelets / Lo
Page 35 and 36: Trocar Ventilation Tubes (TVT) Perf
Page 37 and 38: 04/10 35
Page 39 and 40: Overview AC sizer System Sterile Si
Page 41 and 42: TTP-VARIAC TM System Accessories Th
Page 43 and 44: KURZ ® Precise Cartilage Knife The
Page 45 and 46: Cartilage Punch For optimized Stabi
Page 47 and 48: BELL Expander The capability to ind
Page 49 and 50: Ventilation Tube Insertion Forceps
Page 52: Heinz Kurz GmbH Medizintechnik Tueb

Kurz Catalogue.pdf - Stratmed.co.za

Create successful ePaper yourself

Delete template?

Save as template?