Lamp and Ballast Catalog - The Lighting Company
Lamp and Ballast Catalog - The Lighting Company
Lamp and Ballast Catalog - The Lighting Company
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>The</strong><strong>Lighting</strong><strong>Company</strong>.com<br />
D<br />
ISPLAY<br />
O<br />
PTIC<br />
R<br />
EFERENCE<br />
SYMBOLS & FOOTNOTES FOR DISPLAY/OPTIC LAMPS<br />
Footnote Description<br />
135 <strong>Lamp</strong> life may vary depending on duty cycle <strong>and</strong> application.<br />
136 Connector = Female.<br />
137 Connector = Male.<br />
138 Snap-on connector, female / male contact.<br />
139 In horizontal operation position it is recommended that the "lead connection" wire be in the top position with filler tip facing down.<br />
140 This lamp type is twice the life of the ANSI st<strong>and</strong>ard version.<br />
141 This lamp type is twice the life of the st<strong>and</strong>ard version.<br />
142 Please see Product Number 58795 for double life version.<br />
143 Please see Product Number 58789 for double life version.<br />
144 Please see Product Number 58794 for double life version.<br />
145 XERADEX lamp life is rated in terms of 70% of initial UVC output on a continuous burn cycle.<br />
146 <strong>Lamp</strong> also available with connecting cable <strong>and</strong> plug-in contact. XBO R 100W/45 C OFR (Product Number 69191).<br />
147 Base is KF50 flange fitting; lamp is designed for use in vacuum environments at pressures above 300 mbar.<br />
148 Base is KF40 flange fitting; lamp is designed for use in high vacuum environments at pressures above 30 mbar <strong>and</strong> below 10^-3 mbar.<br />
149 Please see Product Number 58779 for double life version.<br />
150 Please see Product Number 58819 for double life version.<br />
151 Please see Product Number 58821 for double life version.<br />
152 Maximum permitted base temperature is 350 degrees C at molybdenum foil / pinch seal region.<br />
153 Distance b = Ignition Electrode. Base for ignition electrode is SFc 6-3.<br />
154 HBO 200W L1 <strong>and</strong> HBO 200W L2 can be operated on AC or DC.<br />
155 HBO 200W L1 (Product Number 69218) technical data if operated on AC current: Volts = 61 +/- 4, Current (A) = 3.6.<br />
156 HBO 200W L2 (Product Number 69220) technical data if operated on AC current: Volts = 53 +/- 4, Current (A) = 4.2.<br />
157 Distance a is from end of base to the respective electrode tip (cold) - see lamp drawing.<br />
158 Base is KF50 flange fitting; lamp is designed for use in high vacuum environments at pressures above 200 mbar <strong>and</strong> below 10^-3 mbar.<br />
159 For use indoors or outdoors. When used outdoors, protect the lens of the bulb from direct contact with moisture (rain, snow, etc.) to avoid<br />
cracking or breaking.<br />
160 2000hr warranty against non-passive lamp failure.<br />
161 Optimized lamp eXtreme Seal (XS) technology to withst<strong>and</strong> interior base temperatures of up to 450 degrees celsius.<br />
162 When operated on electronic control gear (ECG) service life extended to 3000h.<br />
163 Also available with 850h, HBO 3501 W/PI: NAED 69127.<br />
164 SHP - series (Super High Performance Technology).<br />
165 <strong>Lamp</strong> focus is 60mm in front of reflector rim.<br />
166 <strong>Lamp</strong> is part of the SharXS HTI lamp series. All SharXS HTI lamps are identical in terms of their shape, size, <strong>and</strong> bases.<br />
167 Base has notch for pre-alignment.<br />
168 <strong>Lamp</strong> current not to exceed 7.2A.<br />
169 125 mm (front ring to plug) <strong>and</strong> 95 mm (rear cap to plug) silicon cables terminated with MATE-N-LOK plug no. 350809-1 with pins no.<br />
926868-3 by AMP Inc.<br />
170 It takes time for the mercury in the lamp to evaporate. Typically 95% of luminous output are generated after approximately 120 seconds. For<br />
quality inspection purposes allow for five minutes burning time.<br />
171 Excessive airflow may lead to mercury condensation in the discharge lamp bulb <strong>and</strong> consequently to a performance drop.<br />
172 Operation time after which either aperture lumens decrease to 50% of initial value or the lamp voltage reaches 115 V <strong>and</strong> the lamp cannot be<br />
ignited. Switching cycle: 210 minutes on / 30 minutes off.<br />
173 Operational bulb wall temperatures lower than 850˚C may lead to mercury condensation <strong>and</strong> prevent the lamp from reaching stable operation<br />
conditions; temperatures higher than 950˚C may lead to premature failures of the lamp.<br />
174 For rectangular aperture of 5.0 x 3.8 mm (hor. x vert.) at working distance 17.3 mm.<br />
175 Output is understood as total energy in the range 320 … 500 nm focused on an aperture with diameter d at working distance a in front of the<br />
reflector.<br />
For more complete product information visit www.sylvania.com<br />
278<br />
<strong>The</strong><strong>Lighting</strong><strong>Company</strong>.com
Change language