Datasheet EN.(PDF) - Maxpoint

8
2
1
7
4
5 2U Case RW-202G
6
3
1. Space for ATX and Extended ATX mainboards
2. Slot for 2U power supply (also redundant)
3. 6× hot-swap HDD bays
4. Backplanes for SATA (RW-303G-1) or SCA
(RW-303G-2) hard drives
5. 2× open 5¼" bays
6. 2× USB 2.0 ports
7. 4× 80 mm chassis fans in hot-swap frames
8. 3× slots for AGP/PCI cards
(6× low-profile slots optional)

LOGISTIC DATA:
Item #
Net dimension (W×H×D)
Gross dimension (W×H×D)
Net weight / gross weight
Minimum order quantity
Customs tariff #
Country of origin
TECHNICAL DATA:
Form factor
Quantity of 3½" bays
Quantity of 5¼" bays
Quantity of extension slots
I/O shield
Mainboards supported
Chassis fans
Designation RW-202G-1 RW-202G-2
Item# 10744 11192
Backplane SATA (≤150 MB/s) SCA (Ultra320 SCSI)
RW-202G
• Valuable rack case with aluminium front and door
• Low TCO due to nice price and easy installation and
maintenance
• 6× hot-swap 3½" bays with built-in backplane for SATA or
SCA hard disks allow for quick disk replacement during
normal operation.
• 2× 5¼" bays for CD/DVD drives and streamers
• Effi cient cooling due to 4 electronically controlled and
supervised 80 mm fans
• On/Off and reset switch, case intrusion detector
• Diagnosis LEDs for HDD activity, fan failure as well as
overheating
(see table)
426.5×88×670 mm (1'4¾"×3½"×2'2⅜")
545×150×840 mm (1'9½"×5⅞"×2'9⅛")
10.6 kg / 13.3 kg (23 lb 6 oz / 29 lb 5 oz)
1 piece
84733090
Taiwan (R.O.C.)
19" × 2U
6× hot-swap open (horizontal) with SATA or SCA
backplane built in (see table)
2× open
3× PCI/AGP on Riser card (32 + 64 bit passive)
6× low-profi le PCI/AGP with optional bracket
Standard ATX
Full-size ATX, Extended ATX (up to 12"×13")
4× 80 mm hot-swappable built-in