Magellan 2200VS/2200VSÎ© and 2300HS/2300HSÎ© ... - JUTA-Soft

More documents

Recommendations

Info

Programming Code 39 Stitching Enables/disables stitching for Code 39 labels. When parts of a Code 39 bar code are presented to the scanner with this feature enabled, the bar code parts will be assembled by the scanner’s software, and the data will be decoded if all bar code proofing requirements are met. To set this feature: 1. Scan the SWITCH bar code. 2. Scan your selection from the bar codes below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan. Complete the programming sequence by scanning the SWITCH bar code. CODE 39 STITCHING = DISABLE CODE 39 STITCHING = ENABLE 5-202 Magellan ® 2200VS/2200VSΩ and 2300HS/2300HSΩ
Pharmacode 39 Enable Pharmacode 39 Enable Enables/disables the ability of the scanner to decode Italian Pharmacode 39 labels. To set this feature: 1. Scan the SWITCH bar code. 2. Scan either the enable or disable bar code below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan. 3. Complete the programming sequence by scanning the SWITCH bar code. PHARMACODE 39 = DISABLE PHARMACODE 39 = ENABLE Product Reference Guide 5-203
Page 1 and 2:
Magellan ® 2200VS/2200VSΩ and 230
Page 3 and 4:
Table of Contents Chapter 1. Introd
Page 5 and 6:
RS-232 Host Echo ..................
Page 7 and 8:
RSS Expanded EAN-128 Emulation ....
Page 9 and 10:
Standard 2 of 5 Fixed Length 1 ....
Page 11 and 12:
Chapter 1 Introduction Manual Overv
Page 13 and 14:
Scanner Nomenclature Manual Convent
Page 15 and 16:
Physical Parameters Scanning Physic
Page 17 and 18:
Power Supply The scanner utilizes t
Page 19 and 20:
Laser and Product Safety Safety pre
Page 21 and 22:
PRODUCT SERVICE NRTL N263 Labeling
Page 23 and 24:
Bar Codes Supported Bar Codes Suppo
Page 25 and 26:
Unpacking Chapter 2 Site Preparatio
Page 27 and 28:
Installation: Model 2200VS 4. The s
Page 29 and 30:
Installation: Model 2200VS Figure 2
Page 31 and 32:
Figure 2-3. Countertop Modification
Page 33 and 34:
Chapter 3 Operation and Maintenance
Page 35 and 36:
Scanning Items: Model 2300HS Scanni
Page 37 and 38:
Operating Mode Error Reporting Oper
Page 39 and 40:
Additional Functions Programming Sc
Page 41 and 42:
Chapter 4 Problem Isolation In the
Page 43 and 44:
Error Codes Error Codes If an error
Page 45 and 46:
Flowcharts Figure 4-2. Problem Isol
Page 47 and 48:
Flowcharts Figure 4-4. Problem Isol
Page 49 and 50:
Chapter 5 Programming Introduction
Page 51 and 52:
Programming Overview Programming Ov
Page 53 and 54:
Programming Overview Programming Se
Page 55 and 56:
Programming Sequence Programming Ov
Page 57 and 58:
LED and Beeper Indicators If You Ma
Page 59 and 60:
General Scanner Features General Sc
Page 61 and 62:
Laser Timeout General Scanner Featu
Page 63 and 64:
Motor Timeout General Scanner Featu
Page 65 and 66:
Motor Timeout — continued General
Page 67 and 68:
Scanner Button Options General Scan
Page 69 and 70:
Power-up Beep Control General Scann
Page 71 and 72:
Good Read Beep Control General Scan
Page 73 and 74:
Good Read Beep Frequency — contin
Page 75 and 76:
Good Read Beep Volume General Scann
Page 77 and 78:
Good Read Beep Volume — continued
Page 79 and 80:
Good Read When to Indicate — cont
Page 81 and 82:
General Scanner Features EAS Timeou
Page 83 and 84:
Aux Port Mode — continued General
Page 85 and 86:
Interface Related Features Interfac
Page 87 and 88:
RS-232 Interface Selection Interfac
Page 89 and 90:
RS-232 Single Cable Interface Selec
Page 91 and 92:
IBM USB Interface Selection Interfa
Page 93 and 94:
PC Keyboard Wedge Interface Selecti
Page 95 and 96:
Interface Related Features PC Keybo
Page 97 and 98:
Interface Related Features PC Keybo
Page 99 and 100:
Maximum Host-Transmitted Message Le
Page 101 and 102:
Interface Related Features Global P
Page 103 and 104:
Interface Related Features Global S
Page 105 and 106:
IBM Features IBM Features IBM Trans
Page 107 and 108:
RS-232 Features RS-232 Features RS-
Page 109 and 110:
RS-232 Baud Rate — continued RS-2
Page 111 and 112:
RS-232 Number of Data Bits RS-232 F
Page 113 and 114:
RS-232 Parity RS-232 Features Speci
Page 115 and 116:
RS-232 Hardware Control RS-232 Feat
Page 117 and 118:
RS-232 Intercharacter Delay RS-232
Page 119 and 120:
RS-232 Features RS-232 Host Echo Wh
Page 121 and 122:
RS-232 Ignore Host Commands RS-232
Page 123 and 124:
RS-232 TTL Invert RS-232 Features E
Page 125 and 126:
RS-232 Beep on Not on File RS-232 F
Page 127 and 128:
RS-232 ACK NAK Enable — continued
Page 129 and 130:
RS-232 NAK Character RS-232 Feature
Page 131 and 132:
RS-232 ACK NAK Timeout Value RS-232
Page 133 and 134:
RS-232 ACK NAK Error Handling RS-23
Page 135 and 136:
RS-232 Label ID Control RS-232 Feat
Page 137 and 138:
Single Cable RS-232 Options Single
Page 139 and 140:
Single Cable RS-232 Options Single
Page 141 and 142:
Single Cable RS-232 Use BCC Single
Page 143 and 144:
Single Cable RS-232 Use STX Single
Page 145 and 146:
Single Cable RS-232 Use ETX Single
Page 147 and 148:
PC Keyboard Wedge and USB Keyboard
Page 149 and 150:
Send Control/Function Characters Op
Page 151 and 152:
Page 153 and 154:
Country Mode PC Keyboard Wedge and
Page 155 and 156:
Country Mode — continued PC Keybo
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Quiet Interval — continued PC Key
Page 167 and 168:
Quiet Interval — continued PC Key
Page 169 and 170:
UPC-A Number System Character Trans
Page 171 and 172:
Expand UPC-A to EAN-13 UPC-A Enable
Page 173 and 174:
UPC-A Label ID UPC-A Enable This fe
Page 175 and 176:
UPC-A 5-Digit Supplemental Label ID
Page 177 and 178:
UPC-E Enable UPC-E Enable Enables/d
Page 179 and 180:
UPC-E Enable UPC-E Check Character
Page 181 and 182:
Expand UPC-E to EAN-13 UPC-E Enable
Page 183 and 184:
UPC-E 2-Digit Supplemental Label ID
Page 185 and 186:
UPC-E 128 Supplemental Label ID UPC
Page 187 and 188:
EAN-13 First Character Transmission
Page 189 and 190:
EAN-13 ISBN Conversion Enable EAN-1
Page 191 and 192:
EAN-13 2-Digit Supplemental Label I
Page 193 and 194:
EAN-13 128 Supplemental Label ID EA
Page 195 and 196:
Bookland Label ID EAN-13 Enable Thi
Page 197 and 198:
EAN-8 Check Character Transmission
Page 199 and 200: EAN 8 Label ID EAN-8 Enable This fe
Page 201 and 202: EAN-8 5-Digit Supplemental Label ID
Page 203 and 204: EAN-8 Decoding Levels EAN-8 Enable
Page 205 and 206: EAN-8 Decoding Levels — continued
Page 207 and 208: UPC/EAN Reconstruction Other UPC/EA
Page 209 and 210: Price Weight Check — continued Ot
Page 211 and 212: Enable EAN Two Label Other UPC/EAN
Page 213 and 214: Addons — continued Other UPC/EAN
Page 215 and 216: Other UPC/EAN Options UPC-A and EAN
Page 217 and 218: GTIN Enable Enables/Disables the ab
Page 219 and 220: GTIN 2-Digit Supplemental Label ID
Page 221 and 222: GTIN Code 128 Supplemental Label ID
Page 223 and 224: RSS-14 Check Character Transmission
Page 225 and 226: RSS-14 2D Component Enable RSS-14 E
Page 227 and 228: RSS-14 Label ID RSS-14 Enable This
Page 229 and 230: RSS Expanded EAN-128 Emulation RSS
Page 231 and 232: RSS Expanded AIM ID RSS Expanded En
Page 233 and 234: RSS Expanded Length Control NOTE RS
Page 235 and 236: RSS Expanded Minimum Label Length R
Page 237 and 238: RSS Expanded Fixed Length 2 This fe
Page 239 and 240: Code 39 Start Stop Character Transm
Page 241 and 242: Code 39 Check Character Transmissio
Page 243 and 244: Code 39 AIM ID Code 39 Enable This
Page 245 and 246: Code 39 Length Control Code 39 Enab
Page 247 and 248: Code 39 Minimum Label Length Code 3
Page 249: Code 39 Enable Code 39 Fixed Length
Page 253 and 254: Pharmacode 39 Check Character Trans
Page 255 and 256: Code 128 Enable Code 128 Enable Ena
Page 257 and 258: Convert Code 128 to Code 39 Code 12
Page 259 and 260: Code 128 Label ID Code 128 Enable T
Page 261 and 262: Code 128 Maximum Label Length Code
Page 263 and 264: Code 128 Enable Code 128 Fixed Leng
Page 265 and 266: Code 128 Stitching Code 128 Enable
Page 267 and 268: EAN 128 AIM ID EAN-128 Enable This
Page 269 and 270: Interleaved 2 of 5 (I 2 OF 5) Enabl
Page 271 and 272: I 2 of 5 Check Character Transmissi
Page 273 and 274: I 2 of 5 Label ID Interleaved 2 of
Page 275 and 276: I 2 of 5 Maximum Label Length Inter
Page 277 and 278: I 2 of 5 Fixed Length 1 This featur
Page 279 and 280: I 2 of 5 Stitching Interleaved 2 of
Page 281 and 282: Codabar Start Stop Character Transm
Page 283 and 284: Codabar Start Stop Character Set
Page 285 and 286: Codabar Check Character Calculation
Page 287 and 288: Codabar AIM ID Codabar Enable This
Page 289 and 290: Codabar Length Control Codabar Enab
Page 291 and 292: Codabar Minimum Label Length Codaba
Page 293 and 294: Codabar Fixed Length 2 This feature
Page 295 and 296: Code 93 Enable Code 93 Enable Enabl
Page 297 and 298: Code 93 Label ID Code 93 Enable Thi
Page 299 and 300: Code 93 Maximum Label Length Code 9
Page 301 and 302:
Code 93 Enable Code 93 Fixed Length
Page 303 and 304:
Code 93 Stitching Code 93 Enable En
Page 305 and 306:
MSI/Plessey Check Character Calcula
Page 307 and 308:
MSI/Plessey Check Character Transmi
Page 309 and 310:
MSI/Plessey Label ID MSI/Plessey En
Page 311 and 312:
MSI/Plessey Maximum Label Length MS
Page 313 and 314:
MSI/Plessey Enable MSI/Plessey Fixe
Page 315 and 316:
MSI/Plessey Stitching MSI/Plessey E
Page 317 and 318:
Standard 2 of 5 Check Character Cal
Page 319 and 320:
Standard 2 of 5 AIM ID Standard 2 o
Page 321 and 322:
Standard 2 of 5 Length Control NOTE
Page 323 and 324:
Standard 2 of 5 Minimum Label Lengt
Page 325 and 326:
Standard 2 of 5 Fixed Length 2 This
Page 327 and 328:
Appendix A LED/Beeper Indications &
Page 329 and 330:
Green LED Indicator Table A-2. Gree
Page 331 and 332:
Introduction General Specifications
Page 333 and 334:
IBM Cable Pinout Scanner Connector
Page 335 and 336:
Auxiliary Port External Handheld In
Page 337 and 338:
Appendix C Keypad Use the bar codes
Page 339 and 340:
Use the bar codes in this section t
Page 341 and 342:
Page 343 and 344:
Page 345 and 346:
Appendix D Host Commands Accepting
Page 347 and 348:
Appendix E Factory Defaults The fol
Page 349 and 350:
Table E-2 Aux RS-232 Wincor- Nixdor
Page 351 and 352:
Page 353 and 354:
Page 355 and 356:
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Appendix F Handheld Data Format Req
Page 365 and 366:
UPC-A with 5-Digit Supplemental •
Page 367 and 368:
EAN-8 • Check digit must be inclu
Page 369 and 370:
Code 39 • Check character must be
Page 371 and 372:
MSI/Plessey • Check character mus
Page 373 and 374:
2-Digit Supplemental • Supplement
Page 375 and 376:
Codabar • Check character must be
Page 377 and 378:
Code 128 / EAN128 • Prefix must b
Page 379 and 380:
NOTES Product Reference Guide F-17
Page 381 and 382:
ASCII Character Set The table on th
show all

Magellan 2200VS/2200VSÎ© and 2300HS/2300HSÎ© ... - JUTA-Soft

Create successful ePaper yourself

Delete template?

Save as template?