Drytac Product Reference Guide October 2011
Drytac Product Reference Guide October 2011
Drytac Product Reference Guide October 2011
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
EXPERTS IN FINISHING SOLUTIONS<br />
U.S. PRODUCT REFERENCE GUIDE<br />
OCTOBER <strong>2011</strong>
EXPERTS IN FINISHING SOLUTIONS<br />
Contents<br />
Liquid Coating Equipment<br />
and Liquid Coatings....................................3<br />
VersaCoater XL.........................................................4<br />
SmartCoater..............................................................4<br />
VersaCoater DocuMate Plus.....................................5<br />
VersaCoater PhotoMate...........................................5<br />
EnduraCoat Aqueous Coatings....................................6<br />
Coating Manual Application Kit...................................6<br />
InstaCure UV Curable Coatings....................................6<br />
JetMounter Roller Laminators.................7<br />
JetMounter JM63Pro................................................8<br />
JetMounter JM55Fuzion NEW!................................8<br />
JetMounter JM63SHA-HA & JM55SHA-HA.............9<br />
JetMounter JM44SHA..............................................9<br />
JetMounter JM18, JM26 & JM34...........................10<br />
ML13 & ML25.............................................................10<br />
Laminates and Adhesives<br />
for Roller Laminators................................11<br />
Pressure Sensitive Mounting Adhesives<br />
for Roller Laminators..................................................12<br />
Heat Activated Mounting Adhesives<br />
for Roller Laminators..................................................12<br />
Interlam Bio Overlaminating Films.........................13<br />
Interlam Eco Overlaminating Films.........................13<br />
Interlam Pro Overlaminating Films.........................13<br />
Weathershield® Overlaminating Films......................13<br />
Protac Overlaminating Films...................................14<br />
MHL Thermal Overlaminating Encapsulation Films...15<br />
MHL EarthSmart Thermal Overlaminating Films.....15<br />
Overlaminates for UV Printable Ink Technologies......16<br />
MediaShield Heatset ® Overlaminating Films..........16<br />
Backing Films and Other Materials............................16<br />
Print Media...............................................17<br />
Printable Eclipse for Banner Stands........................18<br />
Other Print Media for Banner Stands.........................18<br />
Print Media for Banners..............................................18<br />
Media for Glass Windows and Doors.........................19<br />
Print Media for Lightboxes.........................................19<br />
Print Media for Wall Graphics....................................19<br />
Rolled Rigid Substrates..............................................20<br />
Printable Metallic Base Film.......................................20<br />
Specialty Self-Adhesive Films.....................................20<br />
Static Cling Dry Erase Film.........................................20<br />
Visual Magnetics® and<br />
Other Specialty <strong>Product</strong>s..........................21<br />
NEW! Visual Magnetics® Graphic System.................22<br />
Invisilock® Sheet Magnet...........................................22<br />
ActiveWall Magnetic Receptive Primer...................22<br />
MagnaMedia® Magnetic Receptive Print Media.......23<br />
Magnetic and Magnetic Receptive<br />
Sheeting and Films.....................................................24<br />
Hot Press Vacuum Presses<br />
and Framing <strong>Product</strong>s...............................25<br />
Hot Press Vacuum Presses......................................26<br />
5151 & 5198 Hydraulic Presses..................................26<br />
Artshield Heatset ® Overlaminates..........................27<br />
Mounting Adhesives and Tissues...............................27<br />
Canvas, Framing and Photo Mounting Tools.............28<br />
Installation Tools and Accesssories...........29<br />
Prep & Installation Tools.......................................30-31<br />
Hanging and Display Accessories..............................32<br />
Plaque Decor and Edge Finishing.............33<br />
DES-1..........................................................................33<br />
DES-3..........................................................................33<br />
Key Hole Router.........................................................33<br />
Standard Matte Edge Foil..........................................33<br />
DES-6..........................................................................34<br />
Edge Secure Glue......................................................34<br />
DES-4..........................................................................34<br />
Edge Banding.............................................................34<br />
Foster Keencut Cutters and Trimmers......35<br />
Excalibur.....................................................................35<br />
SteelTrak.....................................................................35<br />
Javelin Series 2...........................................................35<br />
Max.............................................................................35<br />
Evolution Series 2.......................................................36<br />
Proteus Workbench....................................................36<br />
Sabre Series 2.............................................................36<br />
Big Bench and Big Bench Xtra...................................36<br />
Sales Terms and Conditions......................37<br />
Order Form...............................................38<br />
ii Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com
-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com<br />
Liquid Coating Equipment<br />
and Liquid Coaters Coatings<br />
Liquid lamination offers many advantages,<br />
including a reduced cost cost per per square foot, waste less<br />
and waste production and shorter time. production <strong>Drytac</strong> is time. one of <strong>Drytac</strong> the market is the<br />
leaders market leader in liquid in coatings liquid coatings for the for large the format large<br />
digital format industry. digital industry. We offer We a wide offer range a wide of range coating<br />
products of coating from products general from use general gloss and use matt gloss coatings and<br />
to matte specialty coatings application to specialty coatings application like dry coatings erase and<br />
anti like dry microbial erase and protection. antimicrobial protection.<br />
liquid coating equipment & Liquid coatings<br />
Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com 3
liquid coating equpment & liquid coatings<br />
EXPERTS IN FINISHING SOLUTIONS<br />
VersaCoater XL<br />
Representing the latest standard in graphics finishing<br />
and protection, the VersaCoater XL offers an<br />
efficient finishing solution for wide format digital<br />
graphics that costs just pennies a square foot.<br />
The VersaCoater XL can handle a wide range of<br />
difficult to coat substrates and offers more options<br />
for controlling the finish than competing models.<br />
Applications possible on the VersaCoater XL include<br />
dry erase boards, white flood coating, wall coverings,<br />
fleet graphics and POP displays.<br />
Features:<br />
• Available in 63” (1.6 m) or 78.8” (2 m) coating widths<br />
• Process speed to 100+ fpm (33 mpm)<br />
• Dual scraper blade system prevents coating transfer<br />
• Nip adjusts up to 3” (75 mm), to coat substrates up to<br />
2-3/4” (69.8 mm) thick<br />
• Optional roll-to-roll feature with auto unwind/wind<br />
• Optional white flood coat kit NEW!<br />
• Multiple supply tanks speed coating changeover<br />
SKU<br />
Description<br />
VCXL-60 VersaCoater XL 60” (1.6 m)<br />
VCXL-80 VersaCoater XL 80” (2 m)<br />
AFC SmartCoater<br />
SmartCoater liquid coating systems are the most<br />
advanced coaters in the industry and coater of choice<br />
for producing warrantable vehicle graphics, wall<br />
coverings, truck curtains, banners and other long term<br />
applications. Coating costs range from 2 cents to 26<br />
cents per square foot depending on application and<br />
coating used. Compatible with most roll-to-roll UV,<br />
solvent, eco-solvent and pigmented inkjet printers.<br />
An optional infrared heater significantly increases<br />
production speed.<br />
Features:<br />
• Available in 63” (1.6 m), 86” (2.2 m) or 128” (3.2 m)<br />
coating widths<br />
• Automatic media unwind sensor with alarm<br />
• TruSpeed Speed Compensator<br />
• Interchangeable Mayer bars (available in smooth,<br />
#12/#18/#26/#36) with quick release<br />
• Interchangeable TruGrip supply and take up shafts<br />
• High efficiency IR lamps and dual stage heater<br />
• Pre-wired for optional post coat portable heater<br />
• Process speed to 9 fpm (2.75 mpm) with optional IR<br />
heater<br />
• Automatic temperature control and process monitoring<br />
VCXL-60RRS Roll to roll option for VersaCoater XL60<br />
VCXL-80RRS Roll to roll option for VersaCoater XL80<br />
VCXL-60WK White kit option for VersaCoater XL 60<br />
VCXL-80WK White kit option for VersaCoater XL 80<br />
SKU<br />
WBRC-60<br />
WBRC-86<br />
WBRC-128<br />
Description<br />
60” (1.6 m) aqueous flood coater<br />
86” (2.2 m) aqueous flood coater<br />
128” (3.2 m) aqueous flood coater<br />
4 Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com
VersaCoater DocuMate Plus<br />
The VersaCoater DocuMate Plus features both<br />
pre and post coat conditioning stations and multiple<br />
supply tanks, making this the ultimate user friendly,<br />
micro format UV coater for on demand print shops.<br />
Compatible with traditional offset, litho, digital press<br />
and photographic output, including wax infused low<br />
melt toner systems like the Konica Minolta C6500<br />
printer, this easy-to-use machine features variable<br />
coating thickness control for cut sheet materials up to<br />
120 pound cover weight (350 gsm).<br />
Features:<br />
• available in 13” (330 mm) and 20” (508 mm) models<br />
• Proprietary light reflector design that allows for<br />
maximum curing efficiency<br />
• Can coat a range of material thicknesses without<br />
adjusting rollers from 65 lb to 120 lb cover stock<br />
• enclosed system ensures dust-free prints<br />
• semi-automatic cleaning cycle<br />
• easy controls to adjust for print and coating thicknesses<br />
• Variable speed up to 80 fpm (24 mpm)<br />
• Filtered recirculation system<br />
• Multiple supply tanks<br />
• Optional feeder and jogger available<br />
www.drytac.com<br />
Visit our website for the most up to date product sizes,<br />
pricing and technical information!!<br />
VersaCoater PhotoMate<br />
The VersaCoater PhotoMate is designed to coat<br />
photo projects like portraits, wedding photos,<br />
printed pages for personalized photo albums and<br />
other custom photo projects. The PhotoMate is also<br />
compatible with output from Xerox, HP and Canon<br />
color printers. Capable of processing speeds up<br />
to 100 feet per minute (30 meters per minute), the<br />
VersaCoater PhotoMate’s dual path engineering can<br />
create your choice of textured finishes on the same<br />
machine. Optional textured rollers include Artisan,<br />
Fine Canvas, Crystal, Leather or Linen textures.<br />
Features:<br />
• available in 17”( 432 mm) and 24”(610 mm) formats<br />
• Variable coating thickness from 8 to 14 microns<br />
• Multi-tank coating carousel<br />
• enclosed conveyor for dry, dust-free prints<br />
• Filtered recirculation system to maximize coating<br />
mileage<br />
• a smooth roller and 1 textured roller included standard<br />
• dual path coating technolgy<br />
• textured rollers include: artisan, Fine Canvas, Crystal,<br />
Leather or Linen textures<br />
liquid coating equipment & liquid coatings<br />
SKU Description<br />
VCdM-13-Ir 13” (330mm) UV liquid coater<br />
VCdM-20-Ir 20” (508mm) UV liquid coater<br />
SKU Description<br />
VCPhM-17r2 17” (432 mm) UV liquid coater<br />
VCPhM-24r2 24” (610 mm) UV liquid coater<br />
Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 web: www.drytac.com 5
liquid coating equpment & liquid coatings<br />
EXPERTS IN FINISHING SOLUTIONS<br />
EnduraCoat Aqueous Coatings<br />
These water-based liquid<br />
coatings are low in VOC’s<br />
and specially formulated for<br />
applications such as fleet<br />
graphics, signs and banners<br />
and digitally printed wall<br />
coverings. While most of these<br />
coatings are meant to be<br />
used with the <strong>Drytac</strong>® line of coating<br />
equipment, many can also be applied by hand with a<br />
wool applicator, paint pad, airless sprayer or brush.<br />
Technical data sheets for these products are available<br />
on our website at www.drytac.com.<br />
Outdoor durable*<br />
SKU <strong>Product</strong> Description<br />
eCwB-IG<br />
eCwB-IM<br />
Intego Gloss*<br />
Intego Matte*<br />
Quick dry, low cost<br />
coatings designed<br />
for hand or machine<br />
application<br />
eCwB-PG Photo Gloss Photo coatings that<br />
eCwB-PL Photo Lustre<br />
provide UV and scratch<br />
protection designed<br />
eCwB-PM Photo Matte<br />
for accu 18Xe coater<br />
ECWB-TG Transit Gloss* Flexible, stable coating<br />
for outdoor and fleet<br />
ECWB-TM Transit Matte* graphic applications<br />
eCwB-UM UltraMural*<br />
eCwB-Usr Ultrastain resist*<br />
ECWB-UFG<br />
UltraFlex Gloss*<br />
Flat matte, fade and<br />
mold resistant coating<br />
for wall coverings<br />
High gloss, anti-graffiti<br />
coating<br />
Flexible, highly stable<br />
coating. excellent<br />
for vehicle wrap<br />
applications. Outdoor<br />
durable for 5 years.<br />
Coating Manual Application Kit<br />
Manual application kit that includes a lambswool<br />
applicator and extension pole. Only for use with<br />
aqueous based liquid coatings.<br />
SKU<br />
Description<br />
eCwaPP Manual application kit for aqueous liquid coatings<br />
InstaCure UV Curable Coatings<br />
Specially formulated to be<br />
environmentally safer and lower<br />
odor than other competitor’s<br />
coatings, InstaCure coatings are<br />
available in one of the widest<br />
gloss ranges available on the<br />
market. Applications include<br />
vehicle wraps, point of purchase<br />
displays, dry erase boards and wall<br />
coverings. Technical data sheets for these products<br />
are available on our website at www.drytac.com.<br />
SKU <strong>Product</strong> Description<br />
ICUV-dM digital Matte For toner-based, litho and<br />
ICUV-dG digital Gloss offset prints<br />
ICUV-PG<br />
ICUV-PM<br />
Photo Gloss<br />
Photo Matte<br />
For photos prints. Can be<br />
written on, sanded and<br />
recoated<br />
ICUV-de dry erase<br />
high-gloss for creating dry<br />
erase boards<br />
ICUV-hCG<br />
ICUV-hCM<br />
hard Coat Gloss<br />
hard Coat Matte<br />
Mar, scratch and chemical<br />
resistant coating for rigid<br />
applications<br />
ICUV-LMTG<br />
ICUV-POP POP<br />
Low Melt Toner<br />
Gloss<br />
ICUV-PCC Primer Coat Clear<br />
Designed for use with low<br />
melt toners such as Konica<br />
Minolta<br />
high gloss, general<br />
purpose, with anti-graffiti<br />
properties for board work<br />
Printable coating that can<br />
be used as a primer or top<br />
coat<br />
ICUV-sFG superFlex Gloss Outdoor durable, chemical<br />
resistant coating for<br />
ICUV-sFsM<br />
superFlex<br />
flexible applications like<br />
satin-Matte<br />
vehicle wraps<br />
ICUV-w UV white<br />
translucent white coating<br />
for rigid substrates that<br />
can mimic the look of<br />
white inks. Good for<br />
plexiglass and acrylic.<br />
ICUV-VG Variable Gloss<br />
Can range from matte to<br />
semi-gloss depending on<br />
curing temperature<br />
ICUV-GM<br />
ICUV-GS<br />
Guardian Matte<br />
NEW!<br />
Guardian Satin<br />
NEW!<br />
w-MB1000 Magic Blue New!<br />
Anti-microbial and fire<br />
retardant coating<br />
Low VOC cleaner for<br />
both UV and aqueous<br />
applications<br />
6 Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 web: www.drytac.com
jetmounter roller laminators<br />
JetMounter Roller<br />
Laminators<br />
The design of JetMounter roller laminators is<br />
the culmination of three decades of experience in<br />
the mounting and laminating business. Equipped<br />
with the performance features our customers<br />
demand, JetMounter roller laminators are<br />
unmatched for value.<br />
Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com 7
jetmounter roller laminators<br />
EXPERTS IN FINISHING SOLUTIONS<br />
JetMounter JM63Pro<br />
The JM63Pro is a full feature, versatile, wide-format<br />
roller laminator with roll-to-roll capability at a price<br />
you didn’t think was possible. The addition of the<br />
heated top roller allows it to be used with Heatset ®<br />
and thermal overlaminates as well as pressure sensitive<br />
overlaminates and adhesives.<br />
Features:<br />
• Heated top roller up to 248 °F (120 ° C)<br />
• 63” (1600 mm) laminating width<br />
• Auto and foot pedal operation modes<br />
• Speed control 0 - 12 ft (3.65 m) per minute<br />
• Maximum 2” nip opening<br />
• Nip pressure indicator<br />
• Fold away front table<br />
• Extra rear windup shaft for rewinding roll-to-roll<br />
• A 20’ container holds 7 machines<br />
JetMounter JM55Fuzion NEW!<br />
The JM55Fuzion has many of the features of the<br />
JM63Pro, but in a two-part construction and at a lower<br />
price point. Excellent for laminating vehicle wraps,<br />
creating window decals and mounting graphics to<br />
substrates, the JM55Fuzion is ideal for shops wanting<br />
to add roll-to-roll capability at a lower price tag.<br />
Features:<br />
• Heat assist top roller to 110 °F (43 ° C)<br />
• 55” (1397 mm) laminating width<br />
• Auto and foot pedal operation modes<br />
• Speed control 0-10 ft (3 m) per minute<br />
• Maximum 1” nip opening<br />
• Nip pressure indicator<br />
• Fold away front table<br />
• Top and bottom wind-up shafts<br />
• A 20’ container holds 14 machines<br />
8<br />
SKU<br />
Description<br />
SKU<br />
Description<br />
JM63-Pro<br />
Wide format laminator with heated top roller<br />
JM55-Fuzion<br />
Wide format laminator with heat assist roller<br />
Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com
www.drytac.com<br />
Visit our website for the most up to date product sizes,<br />
pricing and technical information!!<br />
jetmounter roller laminators<br />
JetMounter<br />
JM63SHA-HA & JM55SHA-HA<br />
In addition to the standard features offered by all<br />
JetMounter electric models, including variable<br />
speed electric drive, silicone rollers, all-steel<br />
construction, forward and reverse, foot pedal and<br />
photo-cell safety protection, the JM63SHA-HA and<br />
the JM55SHA-HA offer these additional features:<br />
Features:<br />
• single height adjuster to set even pressure more easily<br />
• LCd pressure gauge display allows greater control over<br />
the process<br />
• Front-mounted media unwind tray with supply shaft can<br />
be used for feeding media, mounting adhesive or kraft<br />
paper<br />
• heavy duty metal stand with two locking casters<br />
• a heat assist roller that runs at 110 °F (43.3 °C) to help<br />
pressure sensitive laminates flow out and prevent<br />
silvering.<br />
JetMounter JM44SHA<br />
The JetMounter JM44SHA offers all the features<br />
offered by all JetMounter electric models, including<br />
variable speed electric drive, silicone rollers, allsteel<br />
construction, forward and reverse, foot pedal<br />
and photo-cell safety protection. It also has these<br />
additional performance features:<br />
Features:<br />
• single height adjuster to set even pressure more easily<br />
• LCd pressure gauge display allows greater control over<br />
the process<br />
• Front-mounted media unwind tray with supply shaft can<br />
be used for feeding media, mounting adhesive or kraft<br />
paper<br />
• heavy duty metal stand with two locking casters<br />
SKU Description<br />
JM63sha-ha 63” wide format laminator with heat assist roller<br />
JM55sha-ha 55” wide format laminator with heat assist roller<br />
SKU<br />
Description<br />
JM44-sha 44” wide format laminator<br />
Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 web: www.drytac.com 9
jetmounter roller laminators<br />
EXPERTS IN FINISHING SOLUTIONS<br />
JetMounter JM18, JM26 & JM34<br />
These smaller JetMounter models are motorized<br />
table top laminators operated by a foot switch, leaving<br />
both hands free to handle the work being processed.<br />
The JM18, JM26 and JM34 are designed for mounting<br />
and laminating inkjet outputs, but are equally capable<br />
of handling photographic or any printed media. All<br />
models include a supply shaft and photo cells for<br />
finger protection.<br />
ML13 & ML25<br />
This table-top manual laminator is an inexpensive<br />
option for small photo studios or copy shops that want<br />
a quick solution to mount or laminate small pieces.<br />
Simple, durable construction makes this model easy<br />
to use. It also folds up for easy storage and transport.<br />
New features include a 1” (2.5 cm) nip opening and a<br />
paper guide that now allows these models to operate<br />
hands-free!<br />
SKU<br />
Description<br />
SKU<br />
Description<br />
JM18<br />
18.25” (464 mm) Electric Laminator<br />
ML13<br />
13” (330 mm) Manual Laminator NEW!<br />
JM26<br />
26.25” (667 mm) Electric Laminator<br />
ML25<br />
25.5” (648 mm) Manual Laminator<br />
JM34<br />
34” (863 mm) Electric Laminator<br />
10 Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com
Laminates and Adhesives<br />
for Roller Laminators<br />
<strong>Drytac</strong> carries a range of pressure sensitive<br />
and heat activated mounting adhesives and<br />
laminating films for use with roller laminators. The<br />
product line includes biodegradeable laminating<br />
films, outdoor durable and special UV printable<br />
laminates that mimic the look of metallic inks.<br />
laminaates & adhesives for roller Laminators<br />
Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com<br />
11
laminates & adhesives for Roller laminators<br />
EXPERTS IN FINISHING SOLUTIONS<br />
Pressure Sensitive Mounting Adhesives for Roller Laminators<br />
<strong>Drytac</strong> manufactures a full range of pressure sensitive adhesives for standard mounting projects and specialty<br />
applications, such as face mounts, interchangeable graphics and floor graphics. All of our adhesive products use<br />
the best quality adhesives, carriers and release liners so you can achieve the best results.<br />
SKU <strong>Product</strong> Description<br />
PSA69 TransferTac Carrier-free aqueous acrylic<br />
adhesive great for ultra smooth<br />
substrates.<br />
PSA26 MediaTac Economical aqueous acrylic<br />
adhesive on a clear 0.5 mil<br />
polyester carrier for volume<br />
mounting.<br />
PSA26P<br />
PSA26PW<br />
BMD<br />
UltraTac<br />
(Formerly<br />
MediaTac Plus)<br />
UltraTac White<br />
NEW!<br />
BestMount DS<br />
Plus<br />
Economical high tack aqueous<br />
acrylic adhesive on a 1 mil clear<br />
polyester carrier for volume<br />
mounting to difficult substrates.<br />
Economical high tack aqueous<br />
acrylic adhesive on a 1 mil white<br />
polyester carrier for volume<br />
mounting to difficult substrates.<br />
Aqueous acrylic adhesive<br />
on a thicker 3 mil white<br />
polypropylene carrier for<br />
mounting to dark substrates.<br />
PSA28 SureTac Aggressive solvent acrylic<br />
adhesive on a clear 1 mil<br />
polyester carrier that can be<br />
used outdoors.<br />
PSA29 SureTac White Aggressive solvent acrylic<br />
adhesive on a 1.1 mil white<br />
polypropylene carrier to reduce<br />
show through. Can also be<br />
used outdoors.<br />
PSF Facemount Optically clear, permanent<br />
acrylic adhesive on a 1 mil<br />
optically clear polyester carrier<br />
for facemounting graphics<br />
to clear substrates like glass,<br />
plexiglass and acrylic.<br />
PSFR<br />
Facemount<br />
Removable<br />
Optically clear, double<br />
sided permanent/removable<br />
adhesive combination on a 1<br />
mil optically clear polyester<br />
carrier for creating removable<br />
facemounted graphics.<br />
PSA47 TwinTac Aqueous acrylic adhesive<br />
on a 2 mil clear PVC carrier<br />
protected on each side with a<br />
release liner. Great for cut sheet<br />
applications.<br />
PSA68 RemoTac A 0.5 mil polyester carrier with<br />
a permanent aqueous acrylic<br />
adhesive on the exposed<br />
side and a removable solvent<br />
acrylic adhesive on the other<br />
protected with a release liner.<br />
Great for removable decals.<br />
SKU <strong>Product</strong> Description<br />
PWD WindowTac Optically clear permanent/<br />
removable adhesive<br />
combination on a 1 mil clear<br />
polyester carrier. A unique<br />
texturized release liner on the<br />
removable side allows the<br />
adhesive to be easily removable<br />
and repositionable with just a<br />
squeegee. Great for creating<br />
easy to install window graphics.<br />
WindowTac mounting adhesive allows you to turn<br />
any print into a window decal. A unique textured<br />
release liner allows decals to be installed on windows<br />
without a soapy solution!<br />
Heat Activated Mounting Adhesives<br />
for Roller Laminators<br />
MHA is a permanent, solvent acrylic adhesive<br />
designed for use on roller laminators with a heated<br />
roller like the JetMounter JM63Pro. The initial tack<br />
is very low, allowing most prints to be repositioned<br />
on MHA coated boards before heat activation. This<br />
feature makes it a popular choice for mounting<br />
delicate prints like architectural renderings, blueprints<br />
and courtroom displays. Once heat-activated, MHA’s<br />
bond is also strong enough to mount graphics to rigid<br />
substrates like PVC.<br />
SKU <strong>Product</strong> Description<br />
MHA<br />
MHA Multi-Heat<br />
Adhesive<br />
Carrier free permanent<br />
solvent acrylic adhesive for<br />
use with roller laminators.<br />
12 Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com
Interlam Bio Overlaminating Films<br />
The innovative film for both of these products<br />
is derived from wood pulp, a sustainable and<br />
biodegradable resource. Interlam BioMatte and<br />
BioGloss break down easily in the recycling process<br />
allowing for more eco-friendly disposal and recycling<br />
options for laminated graphics. These films also utilize<br />
a water-based acrylic adhesive and a thin polyester<br />
release liner to reduce laminating waste and harmful<br />
effects to the environment.<br />
Certified compostable and biodegradable<br />
(dIN eN 13432:2000-12)<br />
SKU <strong>Product</strong> Mil Description<br />
IBG BioGloss 3 gloss finish<br />
IBM BioMatte 3 matte finish<br />
Interlam Eco Overlaminating Films<br />
These overlaminates are both eco-friendly and<br />
price competitive. Interlam Eco films are non-PVC<br />
polypropylene with an aqueous acrylic adhesive. These<br />
films are great for providing image enhancement and<br />
moisture protection for indoor graphics.<br />
Non PVC and aqueous acrylic adhesive<br />
SKU <strong>Product</strong> Mil Description<br />
IeG ecoGloss 2.5 gloss finish<br />
IeL ecoLustre 4.2 lustre finish<br />
IEM EcoMatte 2.5 matte finish<br />
NEW!<br />
Iet ecotex 6.6 pebble texture finish<br />
www.drytac.com<br />
Visit our website for the most up to date product sizes,<br />
pricing and technical information!!<br />
Interlam Pro Overlaminating Films<br />
This range of laminates has a 3+ year outdoor rated<br />
water-based acrylic adhesive coated on PVC vinyl base<br />
film with UV stabilizers for conformability, finish and<br />
superior durability. Interlam Pro overlaminate films<br />
have excellent resistance to UV light, weather and<br />
temperature changes.<br />
Outdoor durable for 3+ years (monomeric PVC)<br />
SKU <strong>Product</strong> Mil Description<br />
ILG Glossy 4 gloss finish<br />
ILL Lustre 4 lustre finish<br />
ILM Matte 4 dead matte finish<br />
ILt emerytex 5 pebble textured/floor graphic<br />
approved<br />
Weathershield ® Overlaminating Films<br />
Weathershield polymeric high performance PVC<br />
overlaminates use more complex plasticizers resulting<br />
in PVC films that have significantly improved durability;<br />
weatherability; and minimal shrinkage and odor (due<br />
to plasticizer migration resistance) when compared to<br />
less expensive monomeric PVC vinyls. The adhesive<br />
is a cross linking solvent acrylic adhesive fortified<br />
with UV stabilizers and absorbers. These films are<br />
recommended for use in outdoor signage or high<br />
end indoor graphic applications where only the best<br />
protection will satisfy.<br />
Outdoor durable for 5+ years (polymeric PVC)<br />
SKU <strong>Product</strong> Mil Description<br />
PGe ws Glossy NEW! 4 gloss finish<br />
PLE WS Lustre NEW! 4 lustre finish<br />
PMM WS Matte NEW! 4 dead matte finish<br />
Pse ws emerytex 5 textured pebble finish<br />
laminaates & adhesives for roller laminators<br />
Interlam Pro and<br />
Weathershield ® overlaminating<br />
films provide outdoor durability<br />
and protection for graphics.<br />
Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 web: www.drytac.com 13
laminates & adhesives for roller laminators<br />
EXPERTS IN FINISHING SOLUTIONS<br />
Protac Overlaminating Films<br />
PVC, polyester and polycarbonate base films coated<br />
with solvent-based acrylic adhesive for the most<br />
demanding applications. Many of these films are<br />
outdoor durable for 3+ years*, identified by an<br />
asterisk (*) in the product column.<br />
Outdoor durable for 3+ years (marked with *)<br />
dry erase (Protac scribe)<br />
Anti Graffiti (Protac Anti-Graffiti)<br />
SKU <strong>Product</strong> Mil Description<br />
PLhG high Gloss 4 high gloss “mirror like”/<br />
polyester<br />
Ps-tM sheentex* 4.2 textured satin/PVC<br />
PLM Matte* 4 dead matte/PVC<br />
PLL Lustre* 4 lustre/PVC<br />
Pst emerytex* 5 textured pebble/PVC<br />
PPC Polycarbonate 5, 10<br />
& 15<br />
satin textured/<br />
polycarbonate<br />
PsK sparkle 3 holographic sparkle/<br />
polyester<br />
Pht hearts 3 holographic hearts/<br />
polyester<br />
PIC Ice 5 crystal texture scuff<br />
resistant/PVC<br />
PaL antique Leather 4 antique leather/PVC<br />
PsL steel 4 brushed metal texture /PVC<br />
Phs hessian 10 woven fabric texture/PVC<br />
PCt Canvastex* 5 embossed canvas/PVC<br />
PLN Linentex* 5 embossed linen/PVC<br />
PsC scribe 2.5 gloss dry erase finish<br />
PBe Anti-Graffiti* 2 gloss/anti-graffiti, polution<br />
protection film/5 years<br />
outdoor durable<br />
PDL<br />
Deep Leather<br />
NEW!<br />
8 embossed deep leather<br />
texture/PVC<br />
Protac laminates range from standard gloss<br />
and matte finishes to textures like canvas, ice and<br />
Emerytex. Pictured from top: Protac Emerytex,<br />
Protac Hessian, Protac Ice and Protac High<br />
Gloss.<br />
14 Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 web: www.drytac.com
MHL Thermal Overlaminating<br />
Encapsulation Films<br />
Our line of thermal laminating films are suitable for<br />
single sided, double sided (encapsulation) or decal<br />
style (adhesive bottom/laminate top) applications.<br />
Film thicknesses vary from 1.7 to 15 mil. Finishes<br />
include gloss, lustre, matte and textured! Optimum<br />
application temperatures vary from 185 °F - 240 °F.<br />
Check www.drytac.com for full technical information.<br />
dry erase (MhL scribe)<br />
SKU <strong>Product</strong> Mil Description<br />
MGD Gloss Low<br />
Temperature<br />
MG Gloss standard<br />
temperature<br />
3, 5<br />
& 10<br />
1.7<br />
& 3<br />
high clarity polyester film/<br />
low application temperature<br />
high clarity polyester film/<br />
standard application<br />
temperature<br />
MLD Lustre 3 & 5 lustre polyester film<br />
MM Matte 1.7 matte polyester film<br />
& 3<br />
MsM Msr Matte scuff<br />
resistant<br />
MLL Impervo 5 &<br />
10<br />
VT<br />
Velvet Touch<br />
NEW!<br />
1.4 matte OPP film/scratch<br />
resistant for book coverings<br />
matte polyester hard coat<br />
1.4 velvet matte finish, excellent<br />
clarity and feel, good for<br />
adding a luxurious touch to<br />
graphics<br />
Ms scribe 3 dry erase film for use with<br />
black markers<br />
MZ Frost 6 composite, textured crystal<br />
finish<br />
MQd Quartz 5 pebble textured polyester<br />
hard coat<br />
www.drytac.com<br />
Visit our website for the most up to date product sizes,<br />
pricing and technical information!!<br />
MHL EarthSmart Thermal<br />
Overlaminating Films<br />
These heat activated films are certified to be<br />
biodegradable and compostable according to ASTM<br />
standards. Check www.drytac.com for full technical<br />
information.<br />
Certified compostable and biodegradable<br />
SKU <strong>Product</strong> Mil Description<br />
EBM<br />
EBG<br />
EarthSmart<br />
Matte NEW!<br />
EarthSmart<br />
Gloss NEW!<br />
1 matte finish certified<br />
biodegradeable film<br />
1 gloss finish certified<br />
biodegradeable film<br />
laminaates & adhesives for roller laminators<br />
Innovative finishes like<br />
MHL Velvet Touch and<br />
MHL EarthSmart Gloss<br />
are new additions to the<br />
MHL product line.<br />
Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 web: www.drytac.com 15
laminates & adhesives for Roller laminators<br />
EXPERTS IN FINISHING SOLUTIONS<br />
Overlaminates for UV Printable<br />
Ink Technologies<br />
This HeatSet ® overlaminating film is specially designed<br />
for laminating UV printed images on rigid boards and<br />
PVC. The vinyl conforms beautifully to the printed<br />
image and avoids the “tenting” or air pockets around<br />
raised ink areas as a result of the custom formulation.<br />
Optimum application temperature is 185 °F.<br />
See www.drytac.com for full technical information.<br />
SKU <strong>Product</strong> Mil Description<br />
GLY<br />
UV Print Gloss<br />
NEW!<br />
1.2 PVC film that adheres to<br />
UV printed output without<br />
tenting<br />
UV Print Gloss, a<br />
PVC overlaminate, is<br />
formulated to adhere<br />
to UV printed output<br />
without “tenting” on<br />
raised ink areas.<br />
Backing Films and Other Materials<br />
Backing films are typically used in encapsulation<br />
style applications on the back of images to increase<br />
thickness, stiffness or improved handling. Great for<br />
adding rigidity and reducing show through for pop<br />
up display graphics, POP displays, banners and other<br />
graphics. Kraft paper and single sided release paper<br />
are useful tools for mounting and laminating.<br />
SKU <strong>Product</strong> Description<br />
PWB Protac Rigid 12 mil/white rigid vinyl film with<br />
pressure sensitive adhesive<br />
MBM<br />
MW<br />
MB<br />
MHL<br />
Backmount<br />
MHL White<br />
Backing<br />
MHL Black<br />
Backing<br />
10 mil/white paper-based<br />
backing with heat activated<br />
adhesive. Protected with clear<br />
moisture barrier.<br />
5 & 10 mil/white polyester film<br />
with thermal adhesive.<br />
10 mil/black polyester film with<br />
thermal adhesive<br />
KP Kraft Paper Natural kraft paper for single<br />
sided laminating<br />
GRP<br />
Single Sided<br />
Release Paper<br />
Silicone coated release paper<br />
ideal for use in single sided<br />
laminating<br />
MediaShield Heatset ®<br />
Overlaminating Films<br />
HeatSet ® or heat-assist laminating films are often<br />
described as a hybrid between thermal and pressuresensitive<br />
films. MediaShield films bond well to inkjet<br />
output with high ink coverage—even on photo gloss<br />
paper and digital photo laser output. MediaShield<br />
laminated graphics can be handled, rolled or trimmed<br />
immediately after processing. Optimal application<br />
temperature is 185 °F.<br />
Outdoor Durable for 2+ years<br />
SKU <strong>Product</strong> Mil Description<br />
GL Gloss 2.6 high gloss polyester<br />
SX Satinex 3 satin PVC<br />
MX Mattex 3 satin matte PVC<br />
MT Matte 4 dead matte PVC<br />
ET Emerytex 5 pebble textured matte PVC<br />
CX Deep Textured<br />
Canvastex<br />
10 deep canvas textured matte<br />
PVC<br />
Backing films are great for adding rigidity and<br />
reducing show through for pop up display graphics,<br />
POP displays, banners, aisle danglers and other<br />
graphics.<br />
16 Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com
Category<br />
print media<br />
Liquid Print Media Coating Equipment<br />
and Liquid Coaters<br />
<strong>Drytac</strong> carries a range of lay flat banner medias,<br />
rigid substrates and specialty print media. Our<br />
Liquid<br />
focus is<br />
lamination<br />
to carry the<br />
offers<br />
special<br />
many<br />
printable<br />
advantages,<br />
products that<br />
including<br />
complement<br />
reduced<br />
our other<br />
cost per<br />
product<br />
square<br />
lines.<br />
foot,<br />
For<br />
waste<br />
more<br />
and<br />
information<br />
production<br />
about<br />
time.<br />
our<br />
<strong>Drytac</strong><br />
print media<br />
is one<br />
products<br />
of the market<br />
or<br />
leaders<br />
recommendations<br />
in liquid coatings<br />
for a particular<br />
for the large<br />
project,<br />
format<br />
contact<br />
digital<br />
your regional<br />
industry.<br />
sales<br />
We<br />
manager<br />
offer a wide<br />
at www.drytac.com.<br />
range of coating<br />
products from general use gloss and matt coatings<br />
to specialty application coatings like dry erase and<br />
anti microbial protection.<br />
Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com<br />
17
print media<br />
EXPERTS IN FINISHING SOLUTIONS<br />
Printable Eclipse for Banner Stands<br />
Our most popular media for retractable banner<br />
stands. Printable Eclipse is coated with an<br />
innovative, quick-dry ink receptive finish and features<br />
an embedded blackout layer that renders the printed<br />
film 100% opaque, ensuring no light shows through.<br />
When laminated with a film laminate like Interlam Pro<br />
Emerytex, the result is a durable graphic that stands<br />
up to handling, rolling and shipping and hangs flat<br />
and straight without edge fray. Available in versions<br />
for both aqueous inkjet, solvent, eco-solvent, UV and<br />
latex printers.<br />
SKU<br />
<strong>Product</strong><br />
Pre-6a<br />
Matte 6 mil /aqueous inks<br />
Pre-12a Matte 12 mil /aqueous inks<br />
Pre-7G w Gloss 7 mil /aqueous or pigmented inks and<br />
latex printers<br />
Pre-12G w Gloss 12 mil /aqueous or pigmented inks and<br />
latex printers<br />
PresG-6.5 Gloss solvent 6.5 mil /solvent inks<br />
PRE-9G<br />
Gloss 9 mil/solvent, UV and latex inks-New!<br />
PreM-9 Matte solvent 9 mil /solvent inks<br />
PreM-18 Matte solvent 18 mil /solvent inks<br />
Other Print Media for Banner Stands<br />
Besides Printable Eclipse, we also carry these other<br />
print medias that are great for retractable banner<br />
stands, pop ups and banners.<br />
Print Media for Banners<br />
EarthSmart Eclipse is a low-density polyethylene<br />
(LDPE) blockout banner material. Its high tensile<br />
strength and blockout layer make it an ideal choice<br />
for banner stand graphics as well as hanging banners.<br />
Since it is made from low-density polyethylene,<br />
or what is commonly referred to as No. 4 plastic,<br />
EarthSmart Eclipse can be recycled in commercial<br />
plastics recycling programs. EarthSmart Eclipse is<br />
also ASTM certified to biodegrade in landfills.<br />
Recyclable and ASTM certified biodegradeable<br />
SKU <strong>Product</strong> Description<br />
ese earthsmart<br />
eclipse<br />
15 mil/LdPe blockout media<br />
for UV printers<br />
99.6% biodegradeable (Panda Print*)<br />
SKU <strong>Product</strong> Description<br />
BF BannerFab 7 mil/printable fabric for<br />
aqueous inkjet printers<br />
OPP<br />
Polypropylene<br />
Matte<br />
PF-hd PhotoFab hd<br />
New!<br />
9 mil/low priced<br />
polypropylene for aqueous<br />
inkjet, solvent and UV printers<br />
5mil/white polyester fabric<br />
for solvent, eco-solvent, UV<br />
curable and latex printers<br />
BAMFAB Panda Print* 18 mil/bamboo fiber print<br />
media for aqueous, solvent<br />
and UV printers*<br />
18 Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 web: www.drytac.com
Media for Glass Windows and Doors<br />
These printable films are ideal for glass decoration<br />
in office, retail and display environments. For<br />
superior quality, try the WindowFX films which are<br />
manufactured in a clean facility to help ensure prints<br />
will be free of dust and imperfections.<br />
SKU <strong>Product</strong> Description<br />
wFX-UPr windowFX<br />
Clear UVPrint<br />
removable<br />
WFX-UPP windowFX<br />
Clear UVPrint<br />
Permanent<br />
2 mil/clear PET film with<br />
removable adhesive for UV<br />
and solvent printers<br />
2 mil/clear PET film with<br />
permanent adhesive for UV<br />
and solvent printers<br />
sCC static Cling Clear 8mil/clear static cling for UV<br />
printers<br />
SCW Static Cling White 8mil/white static cling for UV<br />
printers<br />
Note: WindowTac mounting adhesive (see page 12)<br />
allows you to turn any print into a removable window<br />
decal.<br />
www.drytac.com<br />
Visit our website for the most up to date product sizes,<br />
pricing and technical information!!<br />
Print Media for Wall Graphics<br />
These unique print medias are specialized for<br />
wall graphic applications and feature removable,<br />
repositionable, non damaging adhesives.<br />
Outdoor durable for short-term promotional applications<br />
(PhotoFaB Ultralite)*<br />
SKU <strong>Product</strong> Description<br />
P F PhotoFaB Ultralite<br />
New!<br />
5 mil/white polyester media<br />
with removable adhesive for<br />
solvent, eco-solvent, UV and<br />
latex printers. Can be die cut<br />
easily without edge fray.<br />
print media<br />
Print Media for Lightboxes<br />
A front-printable high gloss media with a diffusion<br />
layer for backlit applications. Extra-bright diffuser<br />
formula optimizes performance for both day and<br />
nighttime conditions. Weather resistant for outdoor<br />
displays. Print coating delivers dense, vibrant colors<br />
for high impact displays.<br />
SKU <strong>Product</strong> Description<br />
PsB Printable Gloss<br />
solvent Backlit<br />
8 mil/front printable gloss<br />
media with diffuser layer/for<br />
solvent printers<br />
PhotoFab Ultralite is a 5 mil white polyester<br />
media with removable adhesive that can<br />
be easily die cut without edge fray.<br />
Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 web: www.drytac.com 19
print media<br />
EXPERTS IN FINISHING SOLUTIONS<br />
Rolled Rigid Substrates<br />
Rolled substrates are easier to store, stay cleaner<br />
and prevent waste, saving you money over pallets of<br />
sheets. These media are coated with a proprietary<br />
UV coating for optimum print results. Also see other<br />
categories in this section for other UV printable media.<br />
ASTM certified biodegradeable (PolystyGreen UV)*<br />
SKU <strong>Product</strong> Description<br />
PS Polystyrene UV 15 and 20 mil/polystyrene for<br />
UV printers<br />
PSG PolystyGreen UV* 15 mil/biodegradable rolled<br />
polystyrene for UV and latex<br />
printers<br />
TPS<br />
Translucent<br />
Polystyrene UV<br />
20mil/translucent polystyrene<br />
for UV printers<br />
Note: Check out our line of coarse natural canvases on<br />
page 28.<br />
Printable Metallic Base Film<br />
MHL High Gloss Silver is a UV printable base film<br />
with a thermal adhesive. This unique flexible film can<br />
be used alone or printed with UV curable inks. Used<br />
alone, it is a great alternative to foiled papers. Printed,<br />
it can mimic the look of metallic inks or foil stamping<br />
when white ink is completely or partially knocked out.<br />
SKU <strong>Product</strong> Mil Description<br />
HGS<br />
High Gloss Silver<br />
NEW!<br />
1.5 High gloss silver finish film/<br />
UV printable to mimic look<br />
of metalic inks<br />
Specialty Self-Adhesive Films<br />
These pressure sensitve films are made for specialty<br />
applications like photo backgrounds and chalkboard<br />
displays.<br />
SKU <strong>Product</strong> Description<br />
CBB<br />
PRF<br />
BV<br />
Chalkboard Black<br />
NEW!<br />
Protective Removable Film<br />
NEW!<br />
Black Velvet<br />
NEW!<br />
Static Cling Dry Erase Film<br />
7mil/PVC film with black<br />
chalkboard finish<br />
protective film with low<br />
tack, easily removable<br />
adhesive<br />
self-adhesive black velvet<br />
perfect for trimming<br />
plaques and plexi mounts,<br />
A white, static cling dry-erase film that sticks to walls,<br />
furniture and almost any smooth surface without<br />
adhesive. Perfect for creating a temporary notice or<br />
white board in a dorm room, board room, classroom,<br />
office or at home. Comes in a pre-perforated roll<br />
packaged in a convenient dispenser box.<br />
SKU <strong>Product</strong> Description<br />
SCD<br />
Static Cling Dry Erase<br />
NEW!<br />
white static cling dry erase<br />
film/23.6” x 31.4” (60 cm<br />
x 80 cm) sheets/25 sheets<br />
per roll<br />
Static Cling Dry Erase<br />
allows you to make a<br />
dry erase white board<br />
anywhere on the fly.<br />
20 Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com
visual magnetics ® & specialty products<br />
Visual Magnetics ® and<br />
Specialty <strong>Product</strong>s<br />
Visual Magnetics ® magnetic graphic system can<br />
be combined to meet an array of changeable<br />
graphic needs utilizing three major components:<br />
MagnaMedia®, print media with the patented<br />
Micro-iron coating; InvisiLock® custom<br />
engineered flexible magnet and ActiveWall®<br />
Micro-iron latex primer. Use of the Visual<br />
Magnetics graphic system for retail sign programs<br />
is more cost effective and easier to install than<br />
traditional signage installation methods.<br />
Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com<br />
21
visual magnetics ® & specialty products<br />
EXPERTS IN FINISHING SOLUTIONS<br />
NEW! Visual Magnetics ® Graphic System<br />
The Visual Magnetics graphic system is transforming the way brands roll out in-store campaigns. This magnetic<br />
graphics system can be combined to meet an array of changeable graphic needs utilizing three major<br />
components:<br />
• MagnaMedia ® with the patented Micro-iron coating<br />
• InvisiLock ® custom engineered flexible magnet<br />
• ActiveWall ® Micro-iron latex primer<br />
Use of the Visual Magnetics graphic system for retail sign programs is more cost effective than traditional foam<br />
board signage because it saves on installation time, shipping costs and reduces waste. The increasingly popular<br />
and cost effective Visual Magnetics, magnetic-receptive system is recognized for its ease-of-use, versatility, and<br />
sustainability. Visit www.drytac.com for technical information and demonstration videos.<br />
Invisilock ® Sheet Magnet<br />
The custom engineered InvisiLock ® magnet, a key<br />
component to the system, adapts to almost any<br />
surface. Not limited to flat surfaces, it can be utilized<br />
on columns, fixtures and other dimensional surfaces.<br />
Once InvisiLock magnet is placed, the intended<br />
surface is ready to accept MagnaMedia ® printed film.<br />
InvisiLock is available in both adhesive-backed and<br />
double-sided, non adhesive versions. The doublesided,<br />
non-adhesive versions allow for rearranging<br />
or reuse of tiles. These are ideal for multifunctional<br />
surfaces and retail environments where the graphic<br />
locations are subject to change regularly. The doublesided<br />
sheeting products are intended for use with<br />
ActiveWall Magnetic Receptive Primer.<br />
ActiveWall Magnetic<br />
Receptive Primer<br />
Wall primer with micro iron technology to turn any<br />
wall into a magnetic receptive surface. A wall or<br />
surface may be primed with ActiveWall magnetic<br />
receptive primer for the most versatile and dynamic<br />
variation of the graphic system. Surfaces primed with<br />
ActiveWall can be painted any color and are then<br />
ready to accept the VM-InvisiLock ® -40HE.<br />
SKU <strong>Product</strong> Description<br />
VMAWP<br />
Active Wall<br />
Primer<br />
water-based, micro-Iron<br />
latex primer/For use with<br />
VM-InvisiLock ® -40HE<br />
SKU <strong>Product</strong> Description<br />
VM30HE<br />
VM30SE<br />
VM40HE<br />
VM-InvisiLock ® -30HE<br />
VM-InvisiLock ® -30SE<br />
VM-InvisiLock ® -40HE<br />
30 mil/high energy<br />
sheeting with adhesive/<br />
applies well to most<br />
surfaces, available in<br />
rolls<br />
30 mil/standard energy<br />
sheeting with adhesive/<br />
similar application to<br />
VMIHESIAR-30 but with<br />
less magnetic strength,<br />
available in rolls<br />
40 mil/two-sided high<br />
energy sheeting/<br />
best for changeable<br />
environments, use with<br />
ActiveWall primer,<br />
available in rolls and<br />
square tiles<br />
22 Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com
MagnaMedia ® Magnetic<br />
Receptive Print Media<br />
Three-time winner of the prestigious DPI <strong>Product</strong><br />
of the Year Award, MagnaMedia may be used on a<br />
variety of printing platforms. The substrate itself is not<br />
a magnet, therefore the same printing process can<br />
be used as with any other paper or film. MagnaMedia<br />
is developed using the cutting edge technology<br />
of coating the highest quality films with micro-iron<br />
particles. Unlike printing directly on magnets—which<br />
are typically thick, difficult to print on, limited in size<br />
and image quality—MagnaMedia is significantly<br />
thinner, smoother and more flexible. Engineered to<br />
be ultra-low profile, MagnaMedia allows for multilayering<br />
of the image while giving the seamless<br />
appearance of a single layer, photo-quality print.<br />
Note: Mil thicknesses shown are the total of the film<br />
thickness plus the thickness of the micro-iron coating.<br />
For full technical information on these media visit our<br />
website at www.drytac.com<br />
Below left and right: Retail sign programs benefit from<br />
reduced shipping costs and easy graphic changeout<br />
with the Visual Magnetics® Graphic System.<br />
www.drytac.com<br />
Visit our website for the most up to date product sizes,<br />
pricing and technical information!!<br />
SKU <strong>Product</strong> Description<br />
VMPMAT<br />
VMPGLS<br />
VMP8UV<br />
VMP8<br />
VMP5<br />
VMSPAC<br />
VM-POLYmatte<br />
VM-POLYgloss®<br />
VM-POLYeight® UV<br />
VM-POLYeight®<br />
VM-POLYfive®<br />
VM-SYNpaper® C<br />
VMCV22 VM-Canvas 22<br />
VMBF17 VM-Bamboo 17<br />
VMDERS<br />
VMDEHC<br />
VMPCBD<br />
VM-DRYerase<br />
VM-DRYerase<br />
Hard Coat Laminate<br />
VM-CHALKboard<br />
14 mil/bright white matte<br />
polypropylene/universal<br />
printer compatibility.<br />
10 mil/high gloss, photo<br />
quality polyester/solvent,<br />
eco-solvent, UV and latex<br />
printer compatible.<br />
12 mil/high gloss polyester/<br />
best results on UV-curable<br />
printers.<br />
12 mil/satin finish polyester<br />
offers excellent heat<br />
stability/compatible with<br />
screen, litho and digital<br />
printers.<br />
9 mil/satin finish polyester/<br />
excellent heat stability and<br />
great for layering graphics/<br />
compatible with screen,<br />
litho and digital printers.<br />
11 mil/clay coat surfaced,<br />
cost effective, satin<br />
synthetic paper/UV printer<br />
compatible/best in stable<br />
environments.<br />
22 mil/soft matte cotton<br />
canvas<br />
17 mil/satin white bamboo<br />
fabric<br />
13 mil/non-printable, bright<br />
white non-ghosting dry<br />
erase surface. Great for<br />
creating versatile dry erase<br />
surfaces.<br />
1.5 mil/heat activated, clear<br />
polyester overlaminate<br />
film/compatible with<br />
MagnaMedia for creating<br />
custom printed dry erase<br />
boards<br />
13 mil/black flexible<br />
chalkboard film/for use with<br />
standard chalk/printable<br />
on most digital and analog<br />
print technologies<br />
visual magnetics ® & specialty products<br />
Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 web: www.drytac.com 23
visual magnetics ® & specialty products<br />
EXPERTS IN FINISHING SOLUTIONS<br />
Magnetic and Magnetic Receptive<br />
Sheeting and Films<br />
These magnetic products can be used to create<br />
vehicle graphics, changeable displays and other<br />
projects. These products are not for use with the<br />
Visual Magnetics ® Graphic system.<br />
SKU <strong>Product</strong> Description<br />
DFE<br />
DFA<br />
Ferro (metal paper)<br />
Ferro with adhesive<br />
lightweight metal<br />
with a smooth white<br />
paper on each<br />
side. Available with<br />
pressure senstive<br />
adhesive<br />
DMS Magnetic Sheeting multi-purpose<br />
magnetic sheeting<br />
with a layer of white<br />
vinyl for vehicle<br />
magnets and other<br />
applications<br />
DMSA<br />
Magnetic Sheeting<br />
with adhesive<br />
mutli-purpose<br />
magnetic sheeting<br />
coated on one<br />
side with pressure<br />
sensitive adhesive<br />
DMT1200 Magnetic Tape 1/2” (13mm) wide<br />
magnetic tape with<br />
pressure sensitive<br />
adhesive on one<br />
side<br />
DMT1300<br />
DMT1310<br />
Magnetic Tape A<br />
Magnetic Tape B<br />
1/2” (13mm) wide<br />
magnetic tapes<br />
with opposite face<br />
polarity so they will<br />
align perfectly<br />
DMJ<br />
Edge to Edge<br />
Magnetic Tape<br />
1/4” (6.4mm) wide<br />
tape with magnetic<br />
edges of opposite<br />
polarity. Tape strips<br />
will join without<br />
overlapping,<br />
connecting graphics<br />
seamlessly<br />
Combine <strong>Drytac</strong>® and Protac Scribe (see page 14)<br />
to create magnetic receptive, dry erase display boards<br />
for demonstrations.<br />
24 Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com
Hot Press Vacuum Presses<br />
and Framing <strong>Product</strong>s<br />
Hot Press heated glass-top vacuum presses<br />
handle a wide range of presentation materials and<br />
are well regarded for their ability to produce a<br />
very even spread of heat across the work surface,<br />
leading to a superior quality of surface finish.<br />
<strong>Drytac</strong> also carries a range of heat activated<br />
mounting adhesives and overlaminates to work<br />
with dry mount presses and framing applications.<br />
hot press Vacuum presses & Framing products<br />
Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com<br />
25
hot press vacuum presses & framing products<br />
EXPERTS IN FINISHING SOLUTIONS<br />
Hot Press Vacuum Presses<br />
The Hot Press Heated Glass-Top Vacuum Press<br />
handles a wide range of presentation materials from<br />
foam board and wood to photos, art prints and<br />
delicate fabrics. The Hot Press brand is well regarded<br />
by picture framers and other finishing professionals for<br />
its ability to produce consistent, high quality results.<br />
All models feature an automatic electronic timer<br />
with a manual override switch and vacuum pressure<br />
adjustment capabilities. Upon completion of the<br />
cycle, vacuum pressure is automatically released and<br />
the timer resets itself. Note: The HGP560 is made to<br />
order. Allow adequate lead time when ordering.<br />
SKU<br />
Description<br />
HGP260 Press 35” x 47” (890 mm x 1194 mm)<br />
HGP360 Press 42.5” x 66.5” (1080 mm x 1689 mm)<br />
HGP560 Press w/ Stand 50.25” x 98.25”<br />
(1276 mm x 2496 mm)<br />
STA260 Stand for HGP260<br />
STA360 Stand for HGP360<br />
5151 & 5198 Hydraulic Presses<br />
Specifically designed for mid-to-high volume plaque,<br />
canvas transfer and other dry mount work, these<br />
heavy-duty presses offer unsurpassed reliability and<br />
efficiency. The <strong>Drytac</strong> ® 5151 and 5198 generate more<br />
than twice the pressure of standard vacuum presses,<br />
cutting dwell time significantly. The presses’ durable<br />
platens are engineered to distribute heat and pressure<br />
evenly and consistently, ensuring a great finish every<br />
time. For added confidence, the presses are controlled<br />
by an electric timer with automatic open feature.<br />
These safety-oriented machines have an emergency<br />
trip wire fitted around the perimeter. Note: These<br />
presses are made to order. Allow adequate lead time<br />
when ordering.<br />
SKU<br />
PR5151<br />
PR5198<br />
Description<br />
5151 Hydraulic Hardbed Press<br />
5198 Hydraulic Hardbed Press<br />
26 Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com
Artshield Heatset ® Overlaminates<br />
Artshield UV Heatset ® laminating films can be<br />
applied quickly and easily with most mechanical,<br />
hardbed or vacuum type mounting presses. The<br />
adhesive coating is initially low-tack, allowing for<br />
removal or repositioning prior to insertion into the<br />
press. The pH-neutral acrylic adhesive contains UV<br />
absorbers for improved protection.<br />
See www.drytac.com for full technical information.<br />
SKU <strong>Product</strong> Description<br />
MX-PP Mattex 3 mil/pre-perforated semi<br />
matte PVC film<br />
Mt-PP Matte 4 mil/ pre-perforated dead<br />
matte PVC film<br />
sX-PP satinex 3 mil/pre-perforated satin<br />
PVC film<br />
GL Gloss 2.5 mil/gloss polyester film<br />
et-PP emerytex 5 mil/pre-perforated pebble<br />
texture PVC film<br />
Ct-PP Canvastex 5 mil/pre-perforated canvas<br />
textured PVC film<br />
LX-PP Linentex 5 mil/pre-perforated linen<br />
textured PVC film<br />
www.drytac.com<br />
Visit our website for the most up to date product sizes,<br />
pricing and technical information!!<br />
Heat Activated Mounting Adhesives<br />
and Tissues (For dry mount presses)<br />
An extensive line of laminates and adhesives designed<br />
to work with vacuum and dry mount presses geared<br />
towards fine art and framing applications.<br />
SKU <strong>Product</strong> Description<br />
ars artsafe 200 acid free, non-yellowing<br />
archival quality mounting<br />
tissue<br />
VM Vistamount 4 mil/economical, general<br />
purpose dry mounting tissue<br />
MF dry Mount Film acrylic adhesive on a thin PVC<br />
carrier. a good alternative to<br />
discontinued GicléeMount<br />
tr trimount 3 mil/premium quality,<br />
permanent dry mounting<br />
tissue. available in sheets or<br />
rolls.<br />
FL Flobond 2 mil/clear, carrier free ph<br />
neutral mounting adhesive<br />
hot press vacuum presses & framing products<br />
Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 web: www.drytac.com 27
hot press vacuum presses & framing products<br />
EXPERTS IN FINISHING SOLUTIONS<br />
Canvas, Framing and Photo Mounting Tools<br />
Tools and accessories for fine art and framing applications.<br />
SKU <strong>Product</strong> Description<br />
MC6203<br />
MC6204<br />
MC6205<br />
MC6212<br />
MC6008<br />
MC6207<br />
MC6209<br />
MC6213<br />
MC6200<br />
MC6201<br />
MC6210<br />
MC6211<br />
MC6110<br />
IRB<br />
CP<br />
LA<br />
AHS<br />
10 oz. Canvas 1 ply canvas with or without<br />
heat activated adhesive<br />
12 oz. Canvas 3 ply artist canvas with<br />
or without heat activated<br />
adhesive<br />
7 oz. #569<br />
Artist Canvas<br />
Super White<br />
Adhesive Coated<br />
Canvas<br />
Adhesive Coated<br />
Canvas<br />
Photo Mounting<br />
Canvas Panels<br />
with Acrylic Sizing<br />
Lamin-All<br />
Adhesive<br />
Acrylic Texture<br />
Gel<br />
Smooth textured cotton duck<br />
with or without heat activated<br />
adhesive.<br />
12 oz white canvas with heat<br />
activated adhesive<br />
12 oz natural canvas with heat<br />
activated adhesive<br />
McDonald Photo Canvas<br />
mounted to heavy duty<br />
board with turned edge<br />
construction.<br />
A permanent bond liquid<br />
adhesive for mounting canvas<br />
White gel that applies with<br />
a brush and dries to a clear,<br />
three dimensional, brush<br />
stroke appearance.<br />
SS Stretcher Strips Tongue and groove design<br />
stretcher strips<br />
AHS200 Canvas Pliers Chrome plated steel with<br />
perfectly mated teeth<br />
975260 Staples 3/8” Steel staples for anchoring<br />
canvas<br />
GFR<br />
Glass Fiber<br />
Release Film<br />
Durable release film for use in<br />
MPP canvas press<br />
PFA Clear PFA Film Non stick film for wrapping<br />
neoprene pads<br />
CRP<br />
GRP<br />
RP<br />
Clear Silicone<br />
Release Film<br />
Single Sided<br />
Release Paper<br />
Double-Sided<br />
Release Paper<br />
Double sided clear release<br />
film<br />
Silicone coated release paper<br />
ideal for use in single sided<br />
laminating<br />
Double-sided, moisture stable<br />
release paper<br />
CGR Glazing Foil Heat-activated foil to enhance<br />
or add a gloss finish<br />
KP Kraft Paper Brown kraft paper on a 3”<br />
core<br />
SKU <strong>Product</strong> Description<br />
PB<br />
FO<br />
Pressure Blanket<br />
for Hardbed<br />
Presses<br />
Foam Overlay<br />
Blanket<br />
Rubber underlay reduces<br />
heat loss and allows vacuum<br />
press platen to conform to<br />
substrates<br />
1/2” and 1/4” foam overlay<br />
to allow moisture and air to<br />
escape during lamination<br />
PE7020 Perforator Roller with evenly spaced<br />
tines for perforating laminates<br />
TI7020 Tacking Iron Electric hot iron for tacking<br />
dry mount tissue in place<br />
28 Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com
installation tools & accessories<br />
Installation Tools and<br />
Accesssories<br />
<strong>Drytac</strong> carries an assortment of graphic installation<br />
tools, hangers and accessories to help complete<br />
your projects.<br />
Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com<br />
29
installation tools & accessories<br />
EXPERTS IN FINISHING SOLUTIONS<br />
Prep & Installation Tools<br />
Tools and accessories to combat dust and static and to assist in graphic production. All of these products are<br />
sold separately.<br />
SKU <strong>Product</strong> Description<br />
ACC9600<br />
ACC9610<br />
Anti-Static<br />
Cloth<br />
Anti-Static<br />
Wisk<br />
Lint free cloth for<br />
removing dust<br />
Wisk for cleaning<br />
prints, grounding<br />
cord included<br />
SKU <strong>Product</strong> Description<br />
ACC9020<br />
ACC9605<br />
Gator<br />
Scraper<br />
Anti Static<br />
Gloves<br />
Metal blade<br />
cleaning tool<br />
Reduces static &<br />
eliminates finger<br />
prints<br />
ACC9057<br />
Burnishing<br />
Pads<br />
Soft felt pad for<br />
removing air<br />
bubbles<br />
ACC9608<br />
Media<br />
Handling<br />
Gloves<br />
Reduces finger<br />
prints<br />
CM100 &<br />
CM200<br />
Cutting Mat<br />
Self healing PVC<br />
mat, available in<br />
24-1/2” & 39”<br />
IMAGER8.8<br />
Imedger<br />
Allows precise<br />
trimming of<br />
the edges of a<br />
mounted graphic<br />
30<br />
ACC9050<br />
& PCRPAD<br />
DRS Roller &<br />
PCR Pad<br />
Dust removing<br />
roller & pad<br />
MUL0012<br />
<strong>Drytac</strong> Mule<br />
Mobile storage<br />
cart for rolled<br />
materials<br />
ACC9715<br />
<strong>Drytac</strong><br />
Leather Knife<br />
Pouch<br />
Leather knife<br />
pouch. Knife not<br />
included.<br />
ACC9010 Eraser Block<br />
For cleaning<br />
lamintor rollers<br />
Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com
SKU <strong>Product</strong> Description<br />
aCC9040<br />
aCC6000<br />
Infrared<br />
thermometer<br />
Magnetic<br />
Laminator<br />
Caddy<br />
easy to use<br />
temperature gun<br />
Caddy to hold<br />
tools<br />
www.drytac.com<br />
Visit our website for the most up to date product sizes,<br />
pricing and technical information!!<br />
SKU <strong>Product</strong> Description<br />
CM300<br />
CMGrId<br />
ZC8040<br />
Oversized<br />
Cutting Mat &<br />
Printed Grid<br />
for Cutting<br />
Mat<br />
realeasy<br />
Cutter<br />
Non glare<br />
cutting mat &<br />
underlayer grid<br />
delicate cutting<br />
tool for cutting<br />
through release<br />
liner but not<br />
material<br />
installation tools & accessories<br />
aCC9520<br />
Non-stick<br />
Teflon<br />
Coated<br />
scissors<br />
Teflon coated<br />
to eliminate<br />
buildup<br />
aCC9055<br />
squeegee<br />
roller<br />
hand held roller<br />
for removing air<br />
bubbles<br />
ZC8020<br />
ZC8021<br />
ZC8030<br />
OLFa<br />
standard<br />
Cutter<br />
OLFa<br />
standard<br />
Cutter Blades<br />
OLFa L-2<br />
hd Cutter<br />
Olfa knives &<br />
blades<br />
aCC9058<br />
aCC9065<br />
aCC9068<br />
aCC9075<br />
aCC9080<br />
aCCtsP<br />
steel edge<br />
Purple safety<br />
ruler<br />
t-square<br />
attachment<br />
heavy stainless<br />
steel ruler<br />
available in<br />
several sizes.<br />
ZC8031<br />
OLFa L-2<br />
hd Cutter<br />
replacement<br />
Blades<br />
aCC9602 tacCloth<br />
slightly tacky, lint<br />
free cloth<br />
aCC9056<br />
window<br />
squeegee<br />
hard plastic<br />
edge window<br />
squeegee<br />
ZC8010 Zippy Cutter<br />
ZC8011<br />
Zippy Cutter<br />
Blades<br />
enclosed blade<br />
safety cutter to<br />
protect fingers &<br />
rollers<br />
Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 web: www.drytac.com 31
installation tools & accessories<br />
EXPERTS IN FINISHING SOLUTIONS<br />
Hanging and Display Accessories<br />
Tapes, display board hangers and Velcro to assist in constructing displays.<br />
SKU <strong>Product</strong> Description<br />
ACC9300<br />
ACC9310<br />
ACC9320<br />
ACC9350<br />
Banner Ups<br />
Banner Ups<br />
PowerTape<br />
Plastic hanging tabs with<br />
aggressive adhesive. Available<br />
in white or clear<br />
Tape to reinforce banner<br />
edges<br />
ACC9250 Ceiling Clips Clips that attach to grids of<br />
ceiling tiles<br />
DES-<br />
4INSERTS<br />
DES-<br />
4INSERTS-<br />
DB<br />
Display Board<br />
Hanger Insert<br />
Display Board<br />
Hanger Drill Bit<br />
PVC display board hangers for<br />
foam boards<br />
Drill bit attachment to route<br />
space for display board<br />
hanger<br />
ACC9500 Foam Tape NEW! 1/32” thick foam tape with a<br />
1/2” face<br />
ACC9270<br />
FoamFast<br />
Hangers<br />
Metal hangers that anchor in<br />
the back of display boards<br />
SKU <strong>Product</strong> Description<br />
ACC9290 Kwik Hangers Self locking hanger for use<br />
with dense foam substrates<br />
ACC8000<br />
ACC9260<br />
ACC9700<br />
ACC9280<br />
ACC9100-<br />
ACC9185<br />
Plastic Foam<br />
Board Corner<br />
Protectors<br />
Pressure-Sensitive<br />
Hangers<br />
Push/Pull<br />
Hangers<br />
SharksTooth<br />
Hangers<br />
Velcro<br />
Corner protectors for foam<br />
boards<br />
Lightweight clear plastic<br />
hangers with pressure<br />
sensitive adhesive<br />
Locking stainless hinge<br />
hangers<br />
Push-in hangers for MDF and<br />
Masonite<br />
Velcro hook and loop tape<br />
in a variety of widths in black<br />
and white<br />
32 Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com
Plaque Decor and Edge Finishing<br />
www.drytac.com<br />
Visit our website for the most up to date product sizes,<br />
pricing and technical information!!<br />
<strong>Drytac</strong> offers a range of edge finishing systems to protect, add value and enhance a wide variety of substrates,<br />
including foam and solid centered display boards.<br />
45 degree<br />
beveled edge.<br />
DES-3<br />
This more economical<br />
edge finishing system<br />
for plaques and block<br />
mounts is geared to<br />
customers that produce a<br />
small to medium volume<br />
of plaques and do not<br />
need to produce large,<br />
oversized plaques. Unlike<br />
the DES-1, there is no conveyor belt and the DES-<br />
3 system consists of two separate machines. One<br />
to apply 45 degree bevel to the MDF or tempered<br />
Masonite plaque and one to apply the edge foil.<br />
plaque decor & edge finishing<br />
DES-1<br />
Plaque finishing and block mounting made easy.<br />
Used by plaque and block mounters worldwide, this<br />
high quality edge finishing machine is designed to<br />
finish the edges of medium density fiber board (MDF)<br />
or tempered Masonite (hardboard) after the images<br />
have been mounted and laminated onto the board.<br />
The edger features several stations on a conveyor that<br />
bevel (45 degree bevel), sand and apply an edge foil<br />
all in one single pass. See our website for a selection<br />
of edge foils in different colors and widths.<br />
SKU<br />
Description<br />
des-1 des-1 Plaquing system<br />
SKU<br />
Keyhole Router<br />
A keyhole router table to<br />
make quick and accurate<br />
keyhole slots on wood<br />
and MDF plaques as well<br />
as Gatorfoam ® . Good<br />
for high volume plaque<br />
and graphics finishing<br />
departments.<br />
SKU<br />
Description<br />
des-3F Foiling station for des-3<br />
DES-3S Shaping station for DES-3<br />
Description<br />
Khr0001 Keyhole router<br />
Standard Matte Edge Foil<br />
Matte edge foils used with the DES-1 and DES-3 can<br />
be purchased at www.drytac.com.<br />
Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 web: www.drytac.com 33
plaque decor & edge finishing<br />
EXPERTS IN FINISHING SOLUTIONS<br />
C-profile edge<br />
Flush edge<br />
DES-6<br />
C profile edging system for curved<br />
and straight boards<br />
The DES-6 is a compact, flexible edging system<br />
that can apply a C profile edging to both straightedged<br />
display boards and die-cut or digitally cut<br />
shaped boards. Programmable logic controller (PLC)<br />
technology and a digital display allow precise glue<br />
application, edging feed and cutting to make applying<br />
edging to eco-boards like Xanita ® and Re-board ®<br />
simple and cost efficient. Great for edging digitally<br />
cut, eco-board structures like furniture, shelving and<br />
display structures for retail displays and tradeshows.<br />
SKU<br />
DES-6<br />
Description<br />
DES-6 Edge Finishing System<br />
Edge Secure Glue<br />
Glue pellets to use with the DES-4 and DES-6 edge<br />
banding systems.<br />
SKU<br />
EDGE-<br />
SECURE<br />
Description<br />
Edge Banding Glue (5 lbs) for use with the DES-4<br />
and DES-6<br />
DES-4<br />
Flush edging system for all types<br />
of display boards<br />
Specifically designed to work with a wide variety of<br />
medium to lightweight and heat-sensitive (foam)<br />
display boards, the DES-4 edging system enhances<br />
your substrates with an inexpensive yet durable<br />
decorative edging while at the same time adding<br />
protection against edge damage and warping.<br />
Innovative design features, including Programmable<br />
Logic Control (PLC) technology allows the DES-4 to<br />
apply PVC edging on boards ranging from 3/8” (10<br />
mm) to 1 ¾” (45 mm) to both foam and solid-centered<br />
display boards such as Gatorfoam ® , Sintra ® /Forex,<br />
Kappaboard, Re-board ® , Xanita, Ecoboard ® and even<br />
3/8” (10 mm) foam core.<br />
SKU<br />
DES-4<br />
Description<br />
Edge Banding<br />
DES-4 Edge Finishing System<br />
A selection of edge banding for use with the DES-4<br />
and DES-6 can be purchased at www.drytac.com.<br />
34 Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com
Foster Keencut Cutters and Trimmers<br />
www.drytac.com<br />
Visit our website for the most up to date product sizes,<br />
pricing and technical information!!<br />
Foster Keencut specializes in precision cutting machines for the sign, digital graphic, printing, photographic and<br />
screen graphics industries. <strong>Drytac</strong> distributes the full line of Foster Keencut products.<br />
Excalibur<br />
Designed to cut sheet<br />
materials such as<br />
hardboards, matboard,<br />
corrugated cardboard,<br />
honeycomb plastics,<br />
foam boards and PVC<br />
foam cleanly and without<br />
dust. Features a single<br />
purpose cutter head with<br />
interchangeable utility blade, plastic scoring blade and<br />
optional glass cutting attachment that scores acrylic<br />
and glass.<br />
SKU<br />
Description<br />
Ke02/000 Excalibur 5000- 63”<br />
60364 Excalibur 1000X- 63”<br />
SteelTrak<br />
The SteelTrak cuts even<br />
5mm Dibond flawlessly.<br />
All cutting tools are<br />
permanently mounted<br />
on the cutting head. Just<br />
turn the wheel to change<br />
tools. Accessories include<br />
the V-Groove Cutting Tool<br />
for POP and architectural signs and the Aluminum<br />
Twin Wheel Cutting Wheel which can cut up to .063”<br />
Aluminum.<br />
SKU<br />
Description<br />
Kst01/000 steeltrak - 65”<br />
Kst02/000 steeltrak - 82”<br />
Kst03/000 2mm V-Groove Cutting tool<br />
Kst04/000 3mm V-Groove Cutting tool<br />
Kst05/000 4mm V-Groove Cutting tool<br />
Kst06/000 6mm V-Groove Cutting tool<br />
Kst07/000 V-Groove replacement Blades<br />
Kst08/000 Free standing Kit for 65” steeltrak<br />
Kst09/000 Free standing Kit for 82” steeltrak<br />
Kst10/000 steeltrak site Line strip (3)<br />
Kst11/000 alum. twin wheel Cutting head<br />
Javelin Series 2<br />
This cutter bar is designed<br />
for demanding standards<br />
of accuracy. The Javelin<br />
design allows technicians<br />
to factory adjust for<br />
straightness to within<br />
0.2mm over the length of<br />
the cutter bar. Ideal for<br />
cutting banner materials, pop-ups and other display<br />
materials that require precise and accurate cutting for<br />
perfect alignment.<br />
SKU<br />
Description<br />
60275 Javelin Series 2- 44”<br />
60276 Javelin Series 2- 64”<br />
60277 Javelin Series 2- 84”<br />
60278 Javelin Series 2- 104”<br />
60279 Javelin Series 2- 124”<br />
Max<br />
The Keencut Max ensures<br />
accurate cutting of<br />
materials up to 5 meters<br />
in width. Available in four<br />
sizes from 3.5 meters, the<br />
Keencut Max offers the<br />
only precise way to cut<br />
large format materials<br />
up to 5 meters wide and<br />
is guaranteed straight to<br />
2.0mm (1:2500) over its full length.<br />
SKU<br />
Description<br />
KM02/000 MaX 4.0m - 160”<br />
KM03/000 MaX 4.5m - 180”<br />
KM04/000 MaX 5.0m - 200”<br />
cutters & trimmers<br />
Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 web: www.drytac.com 35
cutters & trimmers<br />
EXPERTS IN FINISHING SOLUTIONS<br />
Evolution Series 2<br />
The Evolution is a cutting<br />
system designed to<br />
revolutionize the accuracy<br />
and ease of graphics<br />
finishing. Intended to fit<br />
any bench, the Evolution<br />
shares the 1:15000<br />
straightness accuracy<br />
guarantee of the Javelin.<br />
The four piece cutter slideway and torsion bar<br />
extrusion combines with the full length base plate to<br />
create an efficient cutting machine.<br />
SKU<br />
Description<br />
KV01/000 Evolution - 64”<br />
KV02/000 Evolution - 84”<br />
KV03/000 Evolution - 104”<br />
KV04/000 Evolution - 124”<br />
KV05/000 Evolution - 144”<br />
KV06/000 Fabric Cutting Wheel pack of 10<br />
KV07/000 Textile Cutting Strips set of two<br />
Proteus Workbench<br />
The Proteus Workbench is<br />
a strong, elegant modular<br />
system designed to enable<br />
any shop to specify and<br />
assemble the exact work<br />
or display surface needed.<br />
Any Proteus structure<br />
can be re-configured and<br />
expanded, quickly and<br />
economically. No extra<br />
tools are necessary and the<br />
applications are endless. Shown with a custom work<br />
top. The Proteus can be configured to serve as a work<br />
surface for any Evolution Series 2 cutter bar. Under<br />
table storage bins are also available.<br />
SKU<br />
Description<br />
KPE01/000 Proteus Work Bench 64”<br />
KPE02/000 Proteus Work Bench 84”<br />
KPE03/000 Proteus Work Bench 104”<br />
KPE04/000 Proteus Work Bench 124”<br />
KPE05/000 Proteus Work Bench 144”<br />
Sabre Series 2<br />
Efficiently engineered<br />
for small or volume<br />
production, the SABRE<br />
is designed for use on a<br />
bench or attached to the<br />
optional stand. Using the<br />
included lockable casters,<br />
the Sabre can be moved<br />
and positioned alongside<br />
any wide-format printer.<br />
SKU<br />
Big Bench and<br />
Big Bench Xtra<br />
The Big Bench and Big<br />
Bench Xtra create a solid<br />
and precise cutting table<br />
and workstation. With<br />
concealed corner fixings,<br />
built in cutting base plate<br />
and subsurface integral<br />
Lift & Hold system the<br />
Big Bench is a stylish and practical addition to every<br />
workshop. Offered in lengths to accept all Javelin, or<br />
Max Cutter bars.<br />
SKU<br />
Description<br />
KS11/000 Sabre Series 2 GPC 40”<br />
KS12/000 Sabre Series 2 GPC 60”<br />
KS13/000 Sabre Series 2 GPC 80”<br />
KS14/000 Sabre Series 2 GPC 100”<br />
KS15/000 Sabre Series 2 GPC 120”<br />
Description<br />
KB07/000 Big Bench 160”<br />
KB08/000 Big Bench 180”<br />
KB09/000 Big Bench 200”<br />
60928 Big Bench Xtra 44”<br />
60930 Big Bench Xtra 64”<br />
60932 Big Bench Xtra 84”<br />
60934 Big Bench Xtra 104”<br />
60936 Big Bench Xtra 124<br />
36 Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com
Order aCCeptanCe<br />
All orders received are subject to acceptance by <strong>Drytac</strong> and are<br />
governed by <strong>Drytac</strong>’s Standard Terms and Conditions of Sale (A<br />
complete copy is available upon request).<br />
priCinG<br />
All prices quoted are subject to revision without notice and orders<br />
will be accepted only on the understanding that they will be<br />
executed at prices that are in effect at the time of shipping. It is<br />
the Buyer’s responsibility to establish current prices at the time of<br />
order. (Prices do not include any applicable taxes. Please furnish<br />
a copy of a tax exempt or resale certifi cate where required by law.)<br />
A two-tier pricing structure is in effect on most materials<br />
(consumable products):<br />
I. NET A : Orders valued at less than $1,000.00 based on ‘LIST’<br />
prices qualify for ‘NET A’ pricing. This discount is equivalent<br />
to 40% on most products. Please note, the minimum order is<br />
$50.00 NET.<br />
II. NET B : Orders valued at $1,000.00 or more based on ‘LIST’<br />
prices qualify for ‘NET B’ pricing. This discount is equivalent<br />
to 50% on most products.<br />
Liquid coatings, equipment and banner stand products have a<br />
different pricing structure. For details contact your local sales<br />
representative.<br />
SHippinG<br />
All prices quoted are FOB from the applicable <strong>Drytac</strong> location<br />
(Chicago, Dallas, Los Angeles and Richmond, VA). Unless<br />
instructed otherwise, orders will be shipped via the most<br />
economical method (usually UPS). We will attempt to ship all inhouse<br />
merchandise within 24 hours.<br />
Free Freight<br />
Most orders over $1,500.00 ‘NET’ qualify for free ground freight<br />
in the contiguous US. To qualify for free freight, order must be<br />
paid according to the terms of your account. Postmark dates are<br />
acceptable. All freight will be charged on each applicable invoice<br />
and if timely payment is made, the freight should be deducted<br />
from the amount paid. NOTE: Equipment and other items over 60<br />
lbs in weight do not qualify for free freight.<br />
LOSS/damaGe/SHOrtaGeS<br />
<strong>Drytac</strong> is not responsible for loss, damage or any delay in transit.<br />
It is the responsibility of the Buyer to immediately inspect all<br />
deliveries for loss or damage. In the event that there is evidence<br />
of loss or damage, a notation to this effect must be noted on the<br />
carrier’s waybill. The carrier should be notifi ed by telephone and<br />
in writing. All claims should be made directly with the carrier, but<br />
we will be happy to assist. <strong>Drytac</strong> must be advised within 24 hours<br />
of receipt of shipment of any claims for shortages or damage.<br />
www.drytac.com<br />
Visit our website for the most up to date product sizes,<br />
pricing and technical information!!<br />
returnS<br />
<strong>Drytac</strong> will not accept any returns for any reason without<br />
prior authorization. Such authorization is by way of a Return<br />
Authorization (RA) number and such number must be clearly<br />
marked on both the product(s) being returned and the exterior<br />
of all packaging. Return authorization does not constitute that a<br />
credit will automatically be issued and returns for reasons other<br />
than defects are subject to a 20% re-stocking charge. All returns<br />
to <strong>Drytac</strong> are to be shipped freight prepaid. No returns will be<br />
accepted after 60 days from date of invoice.<br />
payment<br />
Payment can be made as follows:<br />
• Credit Card (American Express, MasterCard or Visa).<br />
Payments made by credit card must be made at the time<br />
order is placed. If payment is made by credit card not at the<br />
time of order, it will incur a 3 percent processing fee.<br />
• Prepayment by check prior to shipping. (Please call for freight<br />
charges.)<br />
• Open Account–Net 30 days to customers who have preestablished<br />
credit. (Note: No order will be shipped if a<br />
customer’s account is in arrears and a 2 percent service<br />
charge per month will be assessed on all overdue accounts.)<br />
Limited Warranty and LiaBiLity<br />
All statements, technical information and recommendations<br />
made by <strong>Drytac</strong> and its employees, agents, affi liates, and<br />
subsidiaries are based on our research and are believed to be<br />
accurate, but do not constitute a guarantee or warranty. All <strong>Drytac</strong><br />
products are sold with the understanding that the Purchaser has<br />
independently determined the suitability of such product for their<br />
particular purpose under their own operating conditions. (Note:<br />
All specifi cations are subject to change without notice). The<br />
Purchaser assumes all risk and liability whatsoever in connection<br />
with their use of any <strong>Drytac</strong> product. The products in this price<br />
list are sold without any warranty as to merchantability or fi tness<br />
for a particular use or any other warranty expressed or implied.<br />
No <strong>Drytac</strong> employee or representative has any authority to<br />
waive or change the foregoing provisions, and no statement or<br />
recommendation not contained herein shall have any force or<br />
effect unless made in writing and signed by an offi cer of <strong>Drytac</strong>.<br />
The following is made in lieu of all warranties, expressed or implied.<br />
<strong>Drytac</strong>’s only obligation shall be to replace or credit such quantity<br />
of the product proven to be defective at its discretion. In no event<br />
shall <strong>Drytac</strong> be responsible for any incidental or consequential<br />
damages whether foreseeable or not caused by defects in such<br />
product and whether or not such damage is caused by <strong>Drytac</strong>’s<br />
negligence.<br />
sales terms & conditions<br />
Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 web: www.drytac.com 37
order form<br />
EXPERTS IN FINISHING SOLUTIONS<br />
Ordered by: Ship to: r Same as ordered by<br />
Company Name:<br />
Address:<br />
Company Name:<br />
Address:<br />
City, State, Zip:<br />
City, State, Zip:<br />
Telephone #: Telephone #:<br />
Date:<br />
Customer Code:<br />
Purchase Order#:<br />
Special Instructions<br />
Customer Email:<br />
Quantity Code Description unit price amount<br />
Free Freight applies to qualifying orders. (see your price list.) <strong>Drytac</strong>® standard<br />
terms and conditions apply. We accept Visa, MasterCard and American Express.<br />
(Net 30 days for approved accounts only.)<br />
Subtotal<br />
Tax<br />
Freight<br />
Total<br />
Credit Card Payment Information<br />
Type of Credit Card: ____Visa ____ MasterCard ____American Express<br />
Credit Card #: _________________________________________<br />
Cardholder’s Name: _____________________________________<br />
Exp. Date: ____/_____/_____ Security Code: _______<br />
Signature: ____________________________________<br />
__________________________________________<br />
Authorized by: (Signature)<br />
____/_____/_____<br />
Date:<br />
Richmond, VA- Corporate HQ<br />
5601 Eastport Boulevard<br />
Richmond, VA 23231<br />
Dallas ,TX<br />
11425 Mathis, Suite 400<br />
Farmers Branch, TX 75234<br />
Chicago, IL<br />
140 South Pinnacle Drive<br />
Romeoville, IL 60446<br />
Los Angeles, CA<br />
10600 Shoemaker Ave, Unit D<br />
Santa Fe Springs, CA 90670<br />
38 Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 Web: www.drytac.com
www.drytac.com<br />
Visit our website for the most up to date product sizes,<br />
pricing and technical information!!<br />
Notes<br />
Order three ways: Phone: 1-800-280-6013 Fax: 1-800-622-8839 web: www.drytac.com 39