4SW80 & 4SW140 - Hamworthy
4SW80 & 4SW140 - Hamworthy
4SW80 & 4SW140 - Hamworthy
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Technical Data Sheet: Offshore High Pressure Air Compressors www.hamworthy.com<br />
<strong>4SW80</strong> & <strong>4SW140</strong><br />
Four Stage Water Cooled<br />
Air Compressor Module<br />
Capacities: 75 - 170 cfm (128 - 288 m 3 /hr)<br />
Nominal Pressures: 3000 psi (207 bar)<br />
Maximum Pressure: 3625 psi (250 bar)<br />
Max Pressure Compressor: 5000 psi (345 bar)<br />
<strong>Hamworthy</strong>’s rig tensioning compressors and heave compensation<br />
compressor packages are fully integrated, lightweight, compact and<br />
engineered for the offshore environment.<br />
<strong>Hamworthy</strong> <strong>4SW80</strong> and <strong>4SW140</strong> combine a 4 stage compressor,<br />
air dryer and filtration package with a contained cooling system,<br />
producing dry, filtered, high pressure air/gas suitable for riser<br />
tensioning and offshore applications worldwide.<br />
Standard Features<br />
4 Fully piped and wired skid with lifting points to an offshore<br />
specification<br />
4 Split design skid assisting installation<br />
4 Marine motor<br />
4 Fully automatic, desiccant air dryer giving a -40°F/°C dewpoint<br />
4 Fresh water cooling pack including plate heat exchanger & pump<br />
4 Remote PLC/starter controller designed for ease of operation<br />
4 Suction filter silencer<br />
4 Safety valves on each stage<br />
4 Integral separators with automatic drains<br />
4 Condensate blow down receiver/silencer with automatic drain<br />
4 Air pressure system control switch<br />
Optional Features<br />
4 Refridge dryer giving a 37°F/+3°C dewpoint<br />
4 Cooling pack fitted with shell and tube heat exchanger<br />
4 Resilient mounts fitted to skid with flexible hoses provided<br />
4 Sequence selector panel for lead/lag situations<br />
4 Direct cooling from central circuit<br />
Skid Design<br />
The base is an open frame modular design with a major base<br />
supporting the compressor and motor and a sub baseplate supporting<br />
the cooling pack and dryer. The bases are bolted together and all<br />
services are fully integrated.<br />
Classification<br />
Units are tested and fully assembled ready for installation. The module<br />
meets the requirements of the major marine classification societies.<br />
Starter/controller<br />
The starter controller provides a fully automatic control via a<br />
combined starter/control panel. Fitted with a PLC and operator<br />
interface which monitors the performance of the compressor. The<br />
following functions are monitored and displayed.<br />
4 Maintenance timer 4 Standby<br />
4 Auto drain 4 Motor overload<br />
4 Low oil pressure 4 Delayed stop<br />
4 Low water flow 4 Power loss<br />
4 High water temperature 4 Start up<br />
4 High air temperature 4 Run<br />
4 Compressor purge<br />
Using the optional sequence selector panel multiple machines can be<br />
linked together to provide a lead/lag situation.
<strong>4SW80</strong> & <strong>4SW140</strong> Offshore High Pressure Air Compressors www.hamworthy.com<br />
Specification<br />
<strong>4SW80</strong> (@ 50 & 60 Hz)<br />
<strong>4SW140</strong> (@ 60 Hz)<br />
<strong>4SW140</strong> (@ 50 Hz)<br />
1395 1395<br />
Model Capacity Pressure<br />
Motor Power<br />
m bar psi<br />
3 /h cfm<br />
127.5<br />
238<br />
288<br />
Drive: <strong>4SW80</strong> - belt driven, <strong>4SW140</strong> - direct coupled<br />
Nominal Dimensions (mm)<br />
<strong>Hamworthy</strong> Water Systems Limited<br />
Fleets Corner, Poole,<br />
Dorset BH17 0JT. England.<br />
Tel: +44 (0)1202 662600<br />
Fax: +44 (0)1202 668793<br />
Email: info@hamworthy.com<br />
a subsidiary of <strong>Hamworthy</strong> plc<br />
2028<br />
1942<br />
75<br />
140<br />
170<br />
The manufacturers reserve the right to alter the specification and data to incorporate improvements in design.<br />
Certified drawings will be issued on request.<br />
207<br />
207<br />
207<br />
<strong>4SW80</strong> Weight: 907 kg (2000 Ibs)<br />
1275<br />
1845<br />
<strong>4SW140</strong> Weight: 1542 kg (3400 Ibs) Est.<br />
2390<br />
3000<br />
3000<br />
3000<br />
75 HP (55kW)<br />
100 HP (75kW)<br />
130 HP (97kW)<br />
© All details copyright <strong>Hamworthy</strong> plc. REF: HWS 0006 0911/6