Technical Specifications For Ip Cctv ... - Engineering Projects India Ltd.

More documents

Recommendations

Info

Loop installation: • Barrier installations which close automatically utilize induction loops, to detect approaching vehicles. • The loop should be laid symmetrically with respect to the boom. When determining the layout of the loop, it should be remembered that the boom is fixed to the barrier housing at one side. • The detection loop should be situated so that there is a distance of at least 500mm behind, and in front of the boom. In special cases it is possible to deviate from this value by agreement with the factory if a smaller detection area is required. • The distance from the barrier housing and the end of the boom should be approx. 300 mm from the induction loop. • When concreting in or laying the loop, it should be ensured that the loop cannot move while in operation. Any geometrical changes, causing result in inductance changes, causing interference to the detector. (c) Safety Measures: The following safety instructions and country specific accident prevention regulations are to be observed for installing and operating boom-barriers. • The concrete foundation must be produced by the vendor as per the requirement. • The minimum required distance between the end of the boom barrier and the nearest building should be 500mm. • The vendor must fit all permanent barrier installations with an all pole main switch which can be locked up. • The closing and opening actions must be observed. The mounting of operating elements outside the field of view is not permissible; there must be a line of visibility between the barrier and the control system. • It is forbidden for persons or goods to be anywhere within the swing zone of the barrier boom while it is in operation. • The boom-barrier fixture can withstand winds of upto a maximum of force 10 on the Beaufort scale (= 500N/m²). (VII) Electro-Mechanical Turnstile ; • The outer structure of the turnstile should be made of AISI304 scotch-brite finished stainless steel with a removable cover. • The tripod arm of the turnstile should be made of stainless steel with locking device preventing the arm from being removed without appropriate tools. • The turnstile should be designed to integrate the access control units. • The turnstile should be equipped with an adjustable hydraulic cushion, programmable control logic and an automatic release function for the tripod during blackouts. • The turnstile should operate in 5 different modes: - Access permanently free - Access permanently mechanically locked - Access mechanically locked with automatic unlocking device to give free passage in case of power failure. - Electrically controlled access - Access electrically controlled with automatic unlocking device to give free passage in case of power failure. • The lateral casings should be made of AISI304 stainless steel, they are removable for easy installation and wiring purposes. • Power supply: 230V AC • Protection rating: IP 40 • Operating temperature: -20°C to +55°C Page 26 of 30
(VIII) Bidder to submit the following documents / confirmations along with bid documents. (1) Bidder must submit separately clause wise confirmations on the technical specifications. Any deviation or non-compliance in the technical specification by the bidder/manufacturer should be clearly stated in the technical bid separately. ( 2) Bidder must submit the list of similar type of work executed by them in last 5 years in India ,indicating location, value, name of client ,scope of work and completion certificate. (3) Bidder should have minimum of 5 years of existence in India, with a sound track record of installation. (4) Bidder must specify Make and Model for all the items offered. Complete technical specifications and technical literature must be submitted with the Technical Bid. The bidder must ensure & give a specific confirmation in writing that the equipment being quoted by them is the latest in terms of technology. Certificate to this effect is required to be furnished by the bidder duly counter-signed by OEM. (5) Comprehensive training, shall be provided directly from the OEM/OEM certified engineer to nominated network team of CDRI, Lucknow (06 personnels) staff in installation, testing, trouble-shooting, maintenance and to effectively operate the system. (6) The maximum acceptable response time to provide the service at the site shall be 24 hours. Monday through Friday, 48 hours on Saturday and Sunday. (7) OEM AUTHORIZATION : OEM Authorization letter for this tender must be submitted by bidder for CDRI Project. Page 27 of 30
Page 1 and 2: TECHNICAL SPECIFICATIONS FOR IP CCT
Page 3 and 4: • Provide supervisory specialists
Page 5 and 6: • The ACS shall be a software-bas
Page 7 and 8: • The price coated by the vendor
Page 9 and 10: (6) TESTING: • Component Testing:
Page 11 and 12: • Each of these streams must be i
Page 13 and 14: • Each stream Bit-rate should be
Page 15 and 16: • Must have minimum 1 alarm input
Page 17 and 18: • The software should be capable
Page 19 and 20: • Indication: Mains ON, Inverter
Page 21 and 22: c. Operating Temperature: 32° to 1
Page 23 and 24: (vi) Schedule Management • Set Sc
Page 25: ( VI) BOOM-BARRIER: (a) Boom - Barr
Page 29 and 30: C. Boom-Barrier and Turnstile 1 Boo

Technical Specifications For Ip Cctv ... - Engineering Projects India Ltd.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?