SPARE PART LIST - Interspiro

SPARE PART LIST 

DIVATOR 

30924D01

© 2010 Interspiro AB, Sweden. This publication contains or refers to proprietary information which is protected by 

copyright. All rights are reserved. Interspiro®, DIVATOR Lite® and Spiromatic® are registered trademarks belonging 

to Interspiro. 

This publication may not be copied, photocopied, reproduced, translated, or converted to any electronic or machinereadable 

form in whole or in part without prior written approval from Interspiro.

REAd bEfoRE uSE 

1. Only holders of a valid INTERSPIRO SERVIcE cERTIfIcATE may carry out 

service and repairs on INTERSPIRO breathing equipment. Unauthorized 

service may result in malfunction and users relying thereon could 

sustain severe respiratory injury or death. 

2. When using the spare part list always refer to the equipments SERVIcE 

MANUAL in regard to procedure and handling of the spare parts assembly 

and function. 

3. Changes to this document – necessitated by typographical errors, 

inaccuracies of current information or improvements and changes of 

equipment – may be done at any time and without prior notice. 

4. The NOTES column is used for short discriptions of the spare part, 

for example dimensions or number of included sub components. For 

example "10 x 336 100 437" indicates that this is a multi-pack that consists 

of 10 pieces of the single component 336 100 437. 

5. The service kits contain replacement items used for preventive 

maintenance. 

6. Always refer to www.INTERSPIRO.cOM for product or document updates 

and for service bulletines.

ConTEnTS 

SERvICE kITS ...................................................................................................... 7 

SERvICE kITS (cont.) ......................................................................................... 8 

fACE MASk GREy nATuRAL RubbER ................................................................... 9 

fACE MASk bLACk nATuRAL RubbER ............................................................... 10 

fACE MASk bLACk SILIConE ............................................................................ 11 

fACE MASk yELLow SILIConE .......................................................................... 12 

dIvAToR HATCH ................................................................................................. 13 

bREATHInG vALvE wITHouT SAfETy PRESSuRE, bLACk .................................. 14 

bREATHInG vALvE wITHouT SAfETy PRESSuRE, bLACk (cont.) .......................... 15 

bREATHInG vALvE wITH SAfETy PRESSuRE, bLACk ......................................... 16 

bREATHInG vALvE wITH SAfETy PRESSuRE, bLACk (cont.) ............................. 17 

bREATHInG vALvE "oCToPuS" wITHouT SAfETy PRESSuRE, bLACk ............... 18 

bREATHInG vALvE "oCToPuS" wITHouT SAfETy PRESSuRE, bLACk (cont.) .... 19 

bREATHInG vALvE wITHouT SAfETy PRESSuRE, GREy .................................... 20 

bREATHInG vALvE wITHouT SAfETy PRESSuRE, GREy (cont.) ............................ 21 

bREATHInG vALvE wITH SAfETy PRESSuRE, GREy .......................................... 22 

bREATHInG vALvE wITH SAfETy PRESSuRE, GREy (cont.) ............................... 23 

MkII REGuLAToR wITH wARnInG ..................................................................... 24 

MkII REGuLAToR wITH wARnInG (cont.) .......................................................... 25 

MkII wARnInG dEvICE ..................................................................................... 26 

MkII REGuLAToR ............................................................................................... 27 

MkII REGuLAToR wITHouT wARnInG ............................................................... 28 

MkIII REGuLAToR ............................................................................................. 29 

MkIII HoSES...................................................................................................... 30 

PRESSuRE GAuGE ASSEMbLy ........................................................................... 31

MkIII REGuLAToR unIT ..................................................................................... 32 

MkIII PLuG-In PRESSuRE REGuLAToR ............................................................. 33 

dIvAToR bCw - wInG TyPE buoyAnCy CoMPEnSAToR ................................... 34 

bCw - ACCESSoRIES ........................................................................................ 35 

bCw - ExHAuST vALvE ASSEMbLy ................................................................... 36 

HARnESS - SInGLE & CyLIndER PACk .............................................................. 37 

HARnESS PRo ................................................................................................... 38 

CyLIndER STEEL - SInGLE 316 ......................................................................... 39 

CyLIndER STEEL - PACk 324 ............................................................................ 40 

CyLIndER STEEL - PACk 326 ............................................................................ 41 

CyLIndER CoMPoSITE - PACk 323.4 ................................................................ 42 

CyLIndER CoMPoSITE - PACk 326.7 ................................................................ 43 

Two TyPES of CyLIndER vALvE ....................................................................... 44 

CyLIndER vALvE ............................................................................................... 45 

CyLIndER vALvE & EASy-fILL vALvE .............................................................. 46 

CyLIndER PACk wEIGHTS ................................................................................ 47 

wEIGHT SySTEM................................................................................................ 48 

dP1 SuRfACE PAnEL ........................................................................................ 49 

dP1 vALvE bLoCk ............................................................................................. 50 

dP1 wHISTLE InSERT........................................................................................ 51 

dP1 SHuTTLE InSERT ........................................................................................ 52 

dP1 HoSE & RELIEvInG LooP .......................................................................... 53 

dP1 ConnECTIon MAnIfoLd ............................................................................ 54 

dP1 vEnTInG InSERT ........................................................................................ 55 

dP1 REGuLAToR, P+ ........................................................................................ 56 

dP1 ACCESSoRIES ............................................................................................ 57 

dP1 T-PIECE ..................................................................................................... 58 

TooLS................................................................................................................ 59

SERvICE kITS 

All service kits and service parts listed below shall be replaced during service. 

EVERY YEAR 

fULL fAcE MASK 

460 190 900 Service kit for 1 Full face mask See page 9 - 12 

460 190 901 Service kit for 10 Full face masks See page 9 - 12 

97 220-01 Service kit for 1 DIVATOR Hatch See page 13 

97 220-02 Service kit for 10 DIVATOR Hatch See page 13 

BREATHING VALVE 

336 190 226 Service part for 10 Breathing valves See page 14, 16, 20 & 22 

O-ring, 10 pack 

REGULATOR - MKII 

460 190 711 Service kit for Cylinder connection See page 27 

O-ring, 10 pack 

REGULATOR - MKIII 

460 190 717 Service kit for Regulator manifold See page 32 

DP1 - SURfAcE PANEL 

460 190 701 Service kit for 1 DIVATOR DP1 See page 49 

460 190 711 Service kit for HP connection See page 50 & 54 

EVERY 6 YEARS 

BREATHING VALVE 

460 190 902 Service kit for 1 Breathing valve, NP See page 15, 19 & 21 

460 190 903 Service kit for 10 Breathing valves, NP See page 15, 19 & 21 

460 190 904 Service kit for 1 Breathing valve, SP See page 17 & 23 

460 190 905 Service kit for 10 Breathing valves, SP See page 17 & 23 

460 200 509 Service kilt for 1 Octopus Breathing valve See page 19 

460 200 510 Service kilt for 10 Octopus Breathing valve See page 19 

wARNING DEVIcE - MKII 

460 190 908 Service kit for 1 Warning device See page 26 

REGULATOR - MKII 

460 190 906 Service kit for 1 DIVATOR Swivel See page 25 & 28 

460 190 907 Service kit for 10 DIVATOR Swivel See page 25 & 28 

460 190 910 Service kit for 1 Regulator w/o 4-port swivel See page 27 

460 190 911 Service kit for 10 Regulator w/o 4-port swivel See page 27 

460 190 756 Service kit for 1 MKII 4-port swivel See page 27 

460 190 757 Service kit for 10 MKII 4-port swivel See page 27 

460 190 913 Service kit for 10 Extra air manifold, E-10 See page 28 (not sold on the US market) 


460 190 717 Service kit for Regulator manifold See page 32 

460 190 729 Service kit MKIII regulators (2 pcs) See page 33 


460 190 912 Service kit for 1 Extra air manifold, E-10 See page 28 (not sold on the US market)

SERvICE kITS (cont.) 

cYLINDER PAcK 

460 190 735 Sealing kit, Cross over tube See page 40 - 43 

cYLINDER VALVE TYPE 1 

460 190 914 Service kit for 1 cylinder valve See page 45 

460 190 915 Service kit for 10 cylinder valves See page 45 

cYLINDER VALVE TYPE 2 

460 190 686 Service kit for 1 cylinder valve See page 46 

460 190 687 Service kit for 10 cylinder valves See page 46 

EASY-fILL VALVE 

460 190 732 Service kit for 1 Easy-Fill valve See page 46 

DP1 SURfAcE PANEL 

460 190 702 Service kit for 1 compl. DP1 surface panel See page 49 

DP1 whistle 

460 190 323 Service kit for 1 Whistle See page 51 

DP1 SHUTTLE INSERT 

460 190 712 Service kit for 1 Shuttle insert See page 52 

DP1 VENT INSERT 

460 190 713 Service kit for 1 Vent insert See page 55 

DP1 REGULATOR P+ 

460 190 703 Service kit for 1 Regulator P+ See page 56 

SPEcIAL KITS 

DIVATOR MASK & BREATHING VALVE 

460 200 503 Service Part Kit, Incl. selected rubber parts 

for component level maintenance (listed in document 30508).

6 

4 

1 

19 

3 

5 

18 

# SPARE PART ORDER # NOTES 

• DIVATOR mask, grey NR 336 190 852 

1 Inner mask assy. grey NR 460 190 543 

Incl. single items of #2 & 3 

fACE MASk GREy nATuRAL RubbER 

2 Non-return valve disc 336 190 264 10 x 331 100 791 

3 Valve seat assy. grey 460 190 550 2 x 331 100 791 

2 x 336 900 021 

4 Screw 336 190 246 10 x 941 136 224 

5 Screw 336 190 489 10 x 941 136 226 

6 Retaining plate 460 190 398 

7 O-ring 336 190 222 5 x 944 610 221 

8 Circlip 336 190 255 10 x 944 607 106 

9 Screw 460 190 300 10 x 336 100 029 

10 Cover assembly, grey 336 190 017 

Incl. single item of #7 & two items of #8-9 

11 Mask body assy. grey NR 460 190 545 Incl. #12 

12 Buckle assy. 460 190 541 5 x 336 900 017 

13 Visor frame kit MKII, grey 460 190 548 

Incl. two items of #14 & 15 

2 

21 

14 Screw 336 190 409 10 x 336 900 138 

9 

11 

9 

8 8 

7 

10 

16 

12 

13 

14 15 

(see page 13) 20 


15 Spacer 336 190 554 10 x 336 100 890 

16 Visor MKII 336 190 850 

17 Head harness, grey NR 460 190 375 

18 Pressure equalizer 336 190 373 

Incl. two items of #5 & one item of 19a & 21 

19a Pressure equalizing pad 88 542-51 With four slots. 

19b Pressure equalizing pad 460 190 513 For OTS mic. 

20 Visor with DIVATOR Hatch 96 962-01 

21 Holder 460 190 510 for # 19 

# SERVIcE KIT ORDER # 

17 

Service kit for 1 DIVATOR face mask 460 190 900 

- 1 single item of each of #7 

- 2 single items of each of #2 


- 10 items of service kit 490 190 900

6 

4 

1 

19 

fACE MASk bLACk nATuRAL RubbER 


• DIVATOR mask, black NR 97 771-01 

1 Inner mask assy. black silicone 460 190 542 



3 Valve seat assy. black 460 190 549 2 x 331 100 791 

2 x 336 101 136 

4 Screw 336 190 246 10 x 941 136 224 

5 Screw 336 190 489 10 x 941 136 226 


7 O-ring 336 190 222 5 x 944 610 221 

8 Circlip 336 190 255 10 x 944 607 106 

9 Screw 460 190 300 10 x 336 100 029 

10 Cover assembly, black 460 190 555 


3 

5 

18 

11 Mask body assy. black NR 97 820-51 Incl. #12 

12 Buckle assy. 460 190 541 5 x 336 900 017 

13 Visor frame kit MKII, black 460 190 547 


2 

21 

14 Screw 336 190 409 10 x 336 900 138 

9 

11 

8 8 

10 

7 

9 

16 

12 

10 

13 

14 15 

(see page 13) 


15 Spacer 336 190 554 10 x 336 100 890 

16 Visor MKII 336 190 850 

17 Head harness, black NR 460 190 457 






21 Holder 460 190 510 for # 19 


17 





- 10 items of service kit 460 190 900 

20

6 

4 

1 

19 

3 

5 

18 


• DIVATOR mask, black silicone 336 101 161 

1 Inner mask assy. black silicone 460 190 542 

Incl. two single item of #2 & 3 

fACE MASk bLACk SILIConE 


3 Valve seat assy. black 460 190 549 2 x 331 100 791 

2 x 336 101 136 

4 Screw 336 190 246 10 x 941 136 224 

5 Screw 336 190 489 10 x 941 136 226 


7 O-ring 336 190 222 5 x 944 610 221 

8 Circlip 336 190 255 10 x 944 607 106 

9 Screw 460 190 300 10 x 336 100 029 

10 Cover assembly, black 460 190 555 


11 Mask body assy. black silicone 460 190 544 Incl. #12 

12 Buckle assy. 460 190 541 5 x 336 900 017 

13 Visor frame kit MKII, black 460 190 547 


2 

21 

14 Screw 336 190 409 10 x 336 900 138 

9 

11 

9 

8 8 

10 

7 

16 

12 

14 15 

11 

13 



17 

15 Spacer 336 190 554 10 x 336 100 890 

16 Visor MKII 336 190 850 

17 Head harness, black NR 460 190 457 






21 Holder 460 190 510 for # 19 






- 10 items of service kit 460190 900

6 

4 

1 

19 

3 

5 

2 

fACE MASk yELLow SILIConE 

9 

11 

9 

8 8 


• DIVATOR mask, yellow silicone 336 190 901 

1 Inner mask assy. yellow silicone 336 190 909 



3 Valve seat assy. grey 460 190 550 2 x 331 100 791 

2 x 336 900 021 

4 Screw 336 190 246 10 x 941 136 224 

5 Screw 336 190 489 10 x 941 136 226 


7 O-ring 336 190 222 5 x 944 610 221 

8 Circlip 336 190 255 10 x 944 607 106 

9 Screw 460 190 300 10 x 336 100 029 

10 Cover assembly, grey 336 190 017 


11 Mask body assy. yellow silicone 336 190 908 Incl. #12 

12 Buckle assy. 460 190 541 5 x 336 900 017 

13 Visor frame kit MKII, grey 460 190 548 


14 Screw 336 190 409 10 x 336 900 138 

21 

10 

7 

16 

12 

14 15 

12 

13 



15 Spacer 336 190 554 10 x 336 100 890 

16 Visor MKII 336 190 850 

17 Head harness, grey NR 460 190 375 






21 Holder 460 190 510 for # 19 







17

3 

dIvAToR HATCH 


• DIVATOR Hatch assy. - Sold as Visor with DIVATOR Hatch 96 962-01 

6 Valve disc 97 203-51 Single pack of item #6 

# SERVIcE KIT ORDER # NOTES 

8 

4 

Service kit Hatch, 1 pack 97 220-01 Incl. single item of # 7, 9, 11, 12 and two items of #10. 

Item # 6 not included. 

Service kit Hatch, 10 pack 97 220-02 Incl. 10 items of # 7, 9, 11, 12 and 20 items of #10. 

Item # 6 not included. 

Stem & Screw Kit 30 903-51 Repair kit incl. single of item #3 & 5 

13 

9 

5 

13 

7 

10 

6 

11 

1 

2 

12

REATHInG vALvE wITHouT SAfETy PRESSuRE, bLACk 

1 (see page 15) 


• Breathing valve (w/o SP) 336 101 150 for face mask 

• Breathing valve (w/o SP) 97 199-01 with mouth piece 

1 Exhalation unit, w/o SP 336 101 155 

2 Valve housing, black w/o SP 336 101 156 

Incl. single items of #9 - 11 & 19 

3 Counter pressure assy. w/o SP 460 190 588 

4 Connection nipple 96 341-52 


5 O-ring 336 190 227 10 x 331 900 064 

6 O-ring, green 99 486-51 10 x 99 486-01 

7 Retaining ring 346 190 198 10 x 336 100 777 

8 Valve insert assy. w/o SP 460 190 558 

Incl. single items of #3-7, 12 & 13 

9 Non-return valve assy. 460 190 559 

10 O-ring 336 190 226 10 x 336 900 008 

Only used with face mask 

16 

19 

10 

3 12 13 

7 4 5 6 

8 

14 


11 Nut, black 460 190 516 5 x 336 101 140 

12 Balancing diaphragm 460 190 409 5 x 331 100 641 

13 Valve cone assy. 336 190 064 

14 - 

15 - 

17 18 

16 Valve insert sub assy. w/o SP 97 083-51 

Incl. single items of #3, 12 & 13 

2 

17 Mouth piece 460 190 505 

18 Mouth piece assy. 336 190 353 Incl. #17 

19 Sealing plug 460 190 511 5 x 336 100 509 


Service part for 10 breathing valves 336 190 226 

- 10 single items of each of 336 900 008 

9 

11

REATHInG vALvE wITHouT SAfETy PRESSuRE, bLACk (cont.) 

34 21 22 23 24 25 26 27 28 29 33 30 31 32 20 


20 Locking ring, black 460 190 515 5 x 336 101 139 

21 Shield ring 346 190 197 5 x 336 800 184 

22 Cover with purge button, black 460 190 518 

Incl single item of #21 & 34 

23 Guide disc 460 190 721 

24 Sealing spring 460 190 500 5 x 333 100 056 

25 Sealing disc 460 190 393 5 x 336 100 005 

26 Exhalation diaphragm 30 005-51 5 x 30 005-01 

27 Securing ring 460 190 413 10 x 336 100 008 

28 Diaphragm ring 460 190 394 

29 Guide pin 346 190 194 10 x 336 100 011 

30 Diaphragm 460 190 140 

31 Diaphragm holder 460 190 395 

32 O-ring 336 190 224 5 x 336 900 009 

33 Washer 336 190 638 10 x 336 100 437 

34 Purge button 336 190 487 5 x 336 100 432 

35 Diaphragm assembly 336 190 360 

Incl. single items of #25-33 

36 Lever assy. 460 190 522 

37 Lever support 460 190 504 5 x 336 100 397 

36 

1 

37 

15 

16 

41 

38 

42 


35 

38 Sealing sleeve 346 190 246 5 x 336 100 019 

39 Centre spindle 460 190 406 Incl. single of #40 

40 Adjusting nut 346 190 247 5 x 331 102 020 

41 Sealing spring w/o SP 460 190 501 5 x 336 100 438 

42 Pin 336 190 258 10 x 336 100 046 

43 Lifting spindle 460 190 408 

44 Sealing piston 336 190 284 

Incl. single item of #12, 13 & 43 

43 12 


Service kit for 1 Breathing valve, w/o SP 460 190 902 

- 1 single item of each of #5, 6, 7, 9, 10, 16 & 35 



39 

44 

13 

40

14a 

15 

bREATHInG vALvE wITH SAfETy PRESSuRE, bLACk 

14 


• Breathing valve (w. SP) 336 101 149 

1 Exhalation unit, w SP 460 190 552 

2 Valve housing, black w. SP 336 101 158 


3 Counter pressure assy. w SP 460 190 589 

4 Connection nipple 96 341-51 Incl. single items of #5 & 

6 

5 O-ring 336 190 227 10 x 331 900 064 

6 O-ring 336 190 228 10 x 336 900 007 


8 Valve insert assy. w SP 336 190 357 



10 O-ring 336 190 226 10 x 336 900 008 



14d 

14b 

14c 

16 

10 

3 12 13 

4 5 6 

8 

16 


11 Nut, black 460 190 516 5 x 336 101 140 



14 Lever assy. 336 190 142 Incl. #15 

15 O-ring 336 190 225 10 x 336 900 001 

16 Valve insert sub assy. w SP 97 028-51 Incl. #3, 12 & 13 

17 – 19 - 

2 

7 



- 10 single items of each of item #10 

9 

11

REATHInG vALvE wITH SAfETy PRESSuRE, bLACk (cont.) 

34 21 22 23 24 25 26 27 28 29 33 30 31 32 20 



21 Shield ring 346 190 197 5 x 336 800 184 


incl single item of #21 & 34 

23 Guide disc 460 190 412 


25 Sealing disc 460 190 393 5 x 336 100 005 




29 Guide pin 346 190 194 10 x 336 100 011 

30 Diaphragm 460 190 140 


32 O-ring 336 190 224 5 x 336 900 009 

33 Washer 336 190 638 10 x 336 100 437 

34 Purge button 336 190 487 5 x 336 100 432 



36 Lever assy. 460 190 522 


36 

1 

37 

1 

16 

41 

38 

42 

43 12 


35 


39 Centre spindle 460 190 406 Incl. #40 


41 Sealing spring w. SP 460 190 509 5 x 336 100 438 

42 Pin 336 190 258 10 x 336 100 046 





Service kit for 1 Breathing valve, SP 460 190 904 

- 1 single item of each of #5, 6, 7, 9, 10, 14, 16 & 35 


- 10 item of each of service kit 460 190 904 

39 

44 

13 

40

REATHInG vALvE "oCToPuS" wITHouT SAfETy PRESSuRE, bLACk 


• Breathing valve (w/o SP) 97 199-02 Octopus, lever 

• Breathing valve (w/o SP) 97 199-03 Octopus, 

For US market only, w/o lever 

• Breathing valve (w/o SP) 97 199-04 Octopus, w lever 

1 Exhalation unit, w/o SP 99 484-01 

2 Valve housing, black w. SP 336 101 158 

Incl. #9, 11, 14 & 15 




5 O-ring 336 190 227 10 x 331 900 064 

6 O-ring, green 99 486-51 10 x 99 486-01 





10 - 

14a 

15 

14 


14d 

14b 

14c 

16 

3 

8 

1 

17 

12 13 

9 

2 


11 Nut, black 460 190 516 5 x 336 101 140 



14 Lever assy. 336 190 142 

Incl. single item of #15 

15 O-ring 336 190 225 10 x 336 900 001 



17 Mouth piece 460 190 505 

18 Mouth piece assy. 336 190 353 


4 

7 

19 Octopus holder 88 115-51 5 x 88 115-01 

20 Octopus mouthpiece holder kit 30 780-01 Holder & strap 

18 

5 

11 

19 

6 

20

REATHInG vALvE "oCToPuS" wITHouT SAfETy PRESSuRE, bLACk 

34 21 22 23 

24 



21 Shield ring, yellow 99 485-51 5 x 99 485-01 


with yellow shield ring, incl single item of #21 & 34 

23 Guide disc 30 227-51 


25 Sealing disc 460 190 393 5 x 336 100 005 




29 Guide pin 346 190 194 10 x 336 100 011 

30 Diaphragm 460 190 140 


32 O-ring 336 190 224 5 x 336 900 009 

33 Washer 336 190 638 10 x 336 100 437 

34 Purge button 336 190 487 5 x 336 100 432 



36 Lever assy. 460 190 522 



36 

1 

37 

1 

16 

41 

38 

42 

25 26 27 28 29 33 30 31 32 20 



35 



42 Pin 336 190 258 10 x 336 100 046 




43 12 



- 1 single item of each of #5, 6, 7, 9, (10), 16 & 35 

- Item 10 not used for the Octopus breathing valve 

- For 97 199-03 



Service kit for 1 Octopus Breathing valve, 460 200 510 


Service kit for 10 Octopus Breathing valve, 460 200 511 


39 

44 

13 

40

REATHInG vALvE wITHouT SAfETy PRESSuRE, GREy 


• Breathing valve (w/o SP) 336 190 345 for face mask 

• Breathing valve (w/o SP) 336 190 347 with mouthpiece 

1 Exhalation unit, w/o SP 336 190 406 

2 Valve housing, grey w/o SP 336 190 408 Incl. #9 - 11 




5 O-ring 336 190 227 10 x 331 900 064 

6 O-ring, green 99 486-51 10 x 99 486-01 



Incl. single items of #3-7, 13 . & 13 


10 O-ring 336 190 226 10 x 336 900 008 



16 

19 

10 

3 12 13 

7 4 5 6 

8 

20 


11 Nut, grey 346 190 201 5 x 331 100 652 



14 - 

15 - 

17 18 


Incl. single items of #3, 12 & 13 

17 Mouth piece 460 190 505 

18 Mouth piece assy. 336 190 353 Incl. #17 

19 Sealing plug 460 190 511 5 x 460 190 515 



- 10 single items of each of 336 900 008 

2 

9 

11

REATHInG vALvE wITHouT SAfETy PRESSuRE, GREy (cont.) 

34 21 22 23 

24 


20 Locking ring, grey 346 190 193 5 x 331 100 664 

21 Shield ring 460 190 410 5 x 336 800 184 

22 Cover with purge button, grey 96 343-51 

Incl single item of #21 & 34 

23 Guide disc 30 227-51 


25 Sealing disc 460 190 393 5 x 336 100 005 




29 Guide pin 346 190 194 10 x 336 100 011 

30 Diaphragm 460 190 140 


32 O-ring 336 190 224 5 x 336 900 009 

33 Washer 336 190 638 10 x 336 100 437 

34 Purge button 336 190 487 5 x 336 100 432 



36 Lever assy. 460 190 522 


36 

1 

37 

21 

16 

41 

38 

42 

25 26 27 28 29 33 30 31 32 20 






42 Pin 336 190 258 10 x 336 100 046 




43 12 

35 

# SERVIcE KIT ORDER #. 





39 

44 

13 

40

REATHInG vALvE wITH SAfETy PRESSuRE, GREy 

14a 

15 

14 


• Breathing valve (w. SP) 336 190 354 

1 Exhalation unit w. SP 336 190 356 

2 Valve housing, grey w. SP 336 190 379 


3 Counter pressure assy. w SP 460 190 589 



5 O-ring 336 190 227 10 x 331 900 064 

6 O-ring 336 190 228 10 x 336 900 007 


8 Valve insert assy. w SP 336 190 357 



10 O-ring 336 190 226 10 x 336 900 008 



14d 

14b 

14c 

16 

10 

3 12 13 

4 5 

8 


11 Nut 346 190 201 5 x 331 100 652 



14 Lever assy. 336 190 142 

22 


15 O-ring 336 190 225 10 x 336 900 001 

16 Valve insert sub assy. w SP 97 028-51 


17 - 19 - 

2 



- 10 single items of each of #336 900 008 

7 

9 

11 

6

REATHInG vALvE wITH SAfETy PRESSuRE, GREy (cont.) 

34 21 22 23 

24 


20 Locking ring, grey 346 190 193 5 x 331 100 664 

21 Shield ring 460 190 410 5 x 336 800 184 

22 Cover with purge button, grey 96 343-51 

Incl. single item of #21 & 34 

23 Guide disc 460 190 412 


25 Sealing disc 460 190 393 5 x 336 100 005 




29 Guide pin 346 190 194 10 x 336 100 011 

30 Diaphragm 460 190 140 


32 O-ring 336 190 224 5 x 336 900 009 

33 Washer 336 190 638 10 x 336 100 437 

34 Purge button 336 190 487 5 x 336 100 432 



36 Lever assy. 460 190 522 


36 

1 

37 

23 

16 

41 

38 

42 

25 26 27 28 29 33 30 31 32 20 





41 Sealing spring w. SP 460 190 509 5 x 336 100 438 

42 Pin 336 190 258 10 x 336 100 046 




43 12 


35 


- 1 single item of each of #5, 6, 7, 9, 10, 14, 16 & 35 



39 

44 

13 

40

MkII REGuLAToR wITH wARnInG 


1 a Regulator, Psi, RV, SW 99 083-01 

Regulator, Psi, RV, SW, HUD 99 083-02 

Regulator, Psi, BOV, SW 99 083-03 

Regulator, Psi, BOV, SW, HUD 99 083-04 

Regulator, Bar, RV, SW 99 083-05 

Regulator, Bar, RV, SW, HUD 99 083-06 

Regulator, Bar, BOV, SW 99 083-07 


Regulator, Bar, SW 99 083-09 


Regulator, Psi, SW 99 083-11 

Regulator, Psi, SW, HUD 99 083-12 

1b Regulator, Bar, RV 336 190 377 

Regulator, Bar, BOV 96 727-01 

23 

See warning device, page 26 

2 O-ring for #4 336 190 253 10 x 941 680 310 

3 O-ring for #4 & 8 336 190 221 10 x 944 610 204 

4 High pressure hose 336 190 265 0,63 m 

10 

11 

12 

2 

1 

9 

3 

24 

17 

21 

16 

4 3 


5 Protective cap, G 5/8" 460 190 557 10 x 336 900 327 

6 Swivel, 4 port 99 014-51 

7 O-ring for #8 336 190 311 10 x 944 610 206 

8 Low pressure hose 336 190 288 0,57 m 

9 O-ring 336 190 228 10 x 336 900 007 

10 O-ring for #11 336 190 237 10 x 336 900 099 

11 Breathing valve supply hose 460 190 560 

12 O-ring for #11 336 190 236 10 x 944 610 205 

13 Plug w. O-ring, BSP1/8" 460 190 418 

4 

8 7 

8 

15 

a 

b 

15 

14 O-ring for #13 336 190 312 10 x 336 900 105 

15a O-ring for #16 with UNF3/8" 460 190 529 10 x 336 920 009 

15b O-ring for #16 with BSP1/8" 460 190 599 10 x 336 900 272 

6 

15 

7 

19 

20 

18a 

13, 14 

18b 

6 

5 

5

MkII REGuLAToR wITH wARnInG (cont.) 


16a Dry suit inflation hose, UNF 3/8 " 97 474-53 0.75 m locked 

16a Dry suit inflation hose, UNF 3/8 " 97 474-63 0.75 m unlocked 

16a Dry suit inflation hose, UNF 3/8 " 97 474-54 1 m locked 

16a Dry suit inflation hose, UNF 3/8 " 97 474-64 1 m unlocked 

16b Dry suit inflation hose, BSP 1/8" 97 474-51 0.55 m locked 

16b Dry suit inflation hose, BSP 1/8" 97 474-61 0.55 m unlocked 

16b Dry suit inflation hose, BSP 1/8" 97 474-52 0.75 m locked 

16b Dry suit inflation hose, BSP 1/8" 97 474-61 0.75 m unlocked 

17 DIVATOR Second Breathing Hose 99 077-51 3/8" UNF, 1.7 m, 70 inch 

18a Swivel, BSP 1/8"-BSP1/8" 336 190 348 Incl. #19 & 20 

18b Swivel, BSP 1/8"-UNF3/8" 30 051-51 Incl. #19 & 20 

19 O-ring for #18 336 190 312 10 x 336 900 105 

20 O-ring for #18 336 190 634 10 x 331 900 090 

21 BCW inflation hose, UNF3/8" 336 291 131 1.14 m 

23 DIVATOR MKII reserve holder 30 824-01 


Service kit for 1 Swivel, BSP1/8"-BSP1/8" & BSP1/8"-NNF3/8" (#18) 460 190 906 

- 1 singular item of each of #20 

- 2 singular items of each of #19 

Service kit for 10 Swivel, BSP1/8"-BSP1/8" & BSP1/8"-NNF3/8" (#18) 460 190 907 


BOV = Bail-Out Valve 

RV = Reserve Valve 

SW = Swivel 

25

2 

22 

1 3 4 5 7 6 

BOV = Bail-Out Valve 

RV = Reserve Valve 

MkII wARnInG dEvICE 

18 

9 

8 26 10 


• Warning device MKII Incl. #1-29 

1 Cap 460 190 421 10 x 336 100 604 

2 Split pin 336 190 380 10 x 336 900 104 

3 Nut 460 190 441 5 x 336 100 606 

4 Handle 460 190 433 5 x 336 100 603 

5 Torsion spring 460 190 430 5 x 336 100 605 

6 Nipple 460 190 428 5 x 336 100 407 

7 O-ring 336 190 381 10 x 336 900 106 

8 O-ring 336 190 382 10 x 336 900 103 

9 Valve stem 336 190 404 Incl. #8, 10 & 26 

10 Valve disc 336 190 383 5 x 336 100 412 

11 O-ring 336 190 240 5 x 331 100 562 

12 Guide bushing, RV 460 190 439 5 x 336 100 402 

13 Spring 460 190 437 5 x 336 100 401 

14 Piston, RV 460 190 431 5 x 336 100 400 

15 O-ring 336 190 384 10 x 944 610 209 

16 Plug 460 190 442 5 x 336 100 403 

17 O-ring 336 190 228 10 x 336 900 007 

18 Front and back cover 460 190 427 

19 Protective cap 336 190 257 3 x 331 100 254 

20a Pressure gauge, Bar 99 265-51 Incl. #21 

20b Pressure gauge, Psi 99 265 -52 Incl. #21 

21 Pressure gauge cover, diving 99 266-53 

22 Screw 336 190 247 10 x 336 900 057 

17 

23 

25 

27 

28 

24 

29 

20 

11 

30 

36 

Rv 

12 13 14 

bov 

37 

33 13 

19 


23 O-ring for #24 336 190 235 10 x 944 610 201 

24 High pressure hose 460 190 527 0,15 m 

25 Retaining clip 460 190 503 

26 O-ring for #9 336 190 595 10 x 336 900 165 

27 Cone with O-ring 460 190 369 

28 Quick coupling 460 190 485 IS 

29 Non-return valve 346 190 223 Incl. #27 

30 High pressure connection 460 190 705 Incl. #36 

31 O-ring 336 190 381 10 x 336 900 106 

32 Plug 7/16-20 EN250 97 192-51 incl. #31 

Service kit for 10 Warning device 

- 10 items of 460 190 908 

26 

460 190 909 

21 

31 

32 

15 

38 

16 

33 Piston, bail-out valve 96 728 

34 HUD warning device 89 100-04 

35 O-ring 336 190 238 10 x 944 610 207 

36 Gasket set 336 190 159 2 pack 

37 Label "Bail Out Regulator" 96 554-51 

38 Protective spiral 95 846-53 2 pack, 100 mm 


Service kit for 1 Warning device 460 190 908 

- 1 single item of each of #2, 4, 5, 7, 8 ,10, 11, 15, 17, 26 & 27 

35 

34


• Pressure regulator 460 190 585 

1 Plug w. O-ring, G1/8" 460 190 418 

2 O-ring 336 190 312 10 x 336 900 105 

3 Cover 460 190 506 

4 O-ring 336 190 229 10 x 336 900 041 

5 Diffuser 460 190 564 

6 Stop ring 460 190 424 5 x 336 100 049 

7 Piston 460 190 420 

8 O-ring 336 190 230 10 x 336 900 042 

9 Regulating spring 460 190 422 5 x 336 100 422 

10 Spring 460 190 484 5 x 336 100 048 

11a Inlet filter 346 190 643 10 x 212 100 014 

11b —||— 346 190 644 100 x 212 100 014 

12a O-ring 336 190 272 10 x 331 100 767 

12b —||— 460 190 237 100 x 331 100 767 

13 Nipple 460 190 382 

14 Supporting washer 336 190 637 10 x 336 100 131 

15 O-ring 336 190 233 10 x 336 900 045 

16 Spring 346 190 028 5 x 336 100 280 

17 Seat, regulator 460 190 591 10 x 336 100 126 

18 O-ring 336 190 231 10 x 336 900 043 

19 Adjusting screw 460 190 425 5 x 336 100 127 

20 Sealing plate 336 190 256 25 x 336 100 035 

21 Valve seat set 460 190 648 Incl. #14-18 

22 Anti freezing cap 460 190 507 6 x 336 100 425 

23 Anti freezing cover 460 190 523 

24 Clamp, stainless 460 190 526 

25 Connection nipple 460 190 383 

26 O-ring 336 190 232 10 x 336 900 044 

27 Hand wheel connector 460 190 385 

18 

MkII REGuLAToR 

23 22 24 20 19 17 16 15 

9 10 7 

21 

14 

13 

12 

11 

25 

26 

27 

2 

8 


28 Diffusor, Swivel MKII 99 038-51 10 x 99 039-01 

29 Axis --- 

30 O-ring 336 190 237 10 x 336 900 099 

31 Swivel house --- 

32 Blank plug with O-ring 460 190 755 

33 Washer, swivel MKII 99 013-51 10 x 99 013-01 

34 Screw, swivel MKII 98 939-51 10 x 98 939-01 

35 O-ring for #32 460 190 529 10 x 336 920 009 

36 Swivel, 4-port 99 014-51 

6 

5 4 3 

4 6 28 29 30 31 

# SERVIcE PARTS ORDER # 

Service part for Cylinder connection 460 190 711 

- 1 singular item of each of #11 & 12 

Service kit for 1 Regulator with 4-port swivel 460 190 756 

- 1 single item of each of #4, 8, 11, 12, 15, 17, 

18, 20 & 22 

- 2 single items of each of #14 & 30 

- 4 single items of #35 

Service kit for 10 Regulator with 4-port swivel 460 190 757 


Service kit for 1 Regulator single port 460 190 910 

- 1 single item of each of #2, 4, 8, 11, 12, 15, 

17, 18, 20 & 22 


Service kit for 1 Regulator single port 460 190 911 


1 

2 

36 

32 

35 

32 

33 34

5 

24 

26 

23 

MkII REGuLAToR wITHouT wARnInG 

21, 22 

27 

5 


1 Regulator MKII, 336 191 075 Incl. #5-7, 

Bar, w/o warning 10-12 & 14-26 

2 Regulator with suit infl. hose 97 480-01 incl. #1, 3b & 4 

3 Dry suit inflation hose See page 24 -25 

4 Swivel See page 24 -25 


6 Breathing valve supply hose 460 190 560 

12 

7 Protective cap, G 5/8" 460 190 557 10 x 336 900 327 

8 O-ring for #4 336 190 312 10 x 336 900 105 

9 O-ring for #4 336 190 634 10 x 331 900 090 

10 O-ring for #6 336 190 237 10 x 336 900 099 

11 O-ring for #6 & 15 336 190 236 10 x 944 610 205 

12 O-ring x2 for #25 336 190 228 10 x 336 900 007 

13a O-ring for #3 UNF3/8" 460 190 529 10 x 336 920 009 

13b O-ring for #3 BSP1/8" 460 190 599 10 x 336 900 272 

14 High pressure hose 336 190 936 0.75 m 

15 Low pressure hose 336 190 898 0.65 m 

16 Plug w. O-ring, BSP1/8" 460 190 418 

17 O-ring for #16 336 190 312 10 x 336 900 105 

18 O-ring for #14 336 190 221 10 x 944 610 204 

19 O-ring till #15 336 190 311 10 x 944 610 206 

20 O-ring 336 190 235 10 x 944 610 201 

21a Pressure gauge assy, Bar 99 265-51 

21b Pressure gauge assy, psi 99 265-52 

25 

12 

10 

6 

11 

11 

20 

28 

2 

2 

1 

3 

29 

14 

15 

13 

18 

19 

16, 17 


22a Rubber cover 99 266-51 126 mm w/o hole 

22b Rubber cover 99 266-52 58 mm for HUD 

22c Rubber cover 99 266-54 126 mm w hole 

23 Non return valve complete 346 190 223 

24 O-ring for #26 346 190 069 10 x 944 610 210 

25 Extra air manifold, E-10 346 190 040 

26 Quick coupling 96 531-51 

27 Cone w. O-ring 460 190 369 

28 Protective cap strap 88 208-51 Single pack 

29 BC Inflation hose, UNF3/8" 336 291 131 1.15 m 


Service kit for 1 Swivel, BSP1/8"-BSP1/8" (#4) 460 190 906 



Service kit for 10 Swivel, BSP1/8"-BSP1/8" (#4) 460 190 907 


Service kit for 1 Extra air manifold, E-10 (#25) 460 190 912 

- 1 single item of each of #24 & 27 


Service kit for 10 Extra air manifold, E-10 (#25) 460 190 913 

- 10 items of service kit 460 190912 

13 

4a 

4b 

7 

8 

9

6 

1 

2 

7 

MkIII REGuLAToR 


1a DIVATOR MKIII Reg w Octopus, Bar 30 026-01 with BC hose and Dry suit hose 0.75 m 

1b DIVATOR MKIII Reg w Octopus, Bar 30 026-03 with BC hose and Dry suit hose 1.0 m 

1c DIVATOR MKIII Reg w Octopus, Psi 30 026-07 without BC and Dry suit hoses 

2 Plug-in pressure regulator --- See page 33 

3 CDR valve handle 88 111-51 

4 Octopus holder See page 18 

5 Holder strap with hook 88 139-52 

6 MKIII regulator manifold --- See page 32 

7 Anti freezing unit MKIII -- See page 32 

8 High pressure hose, 460 190 724 See page 31 0.75 m 

9a Pressure gauge, Bar 99 265-51 See page 31 

9b Pressure gauge, Psi 99 265-52 See page 31 

3 

8 

2 

4 

9 

5

1 

3 


2 

1 Pressure gauge assy. --- See page 31 


3 O-ring 336 190 221 10 x 944 610 204 

4 90º connection 88 119-51 


6 Hose short w. quick connector 156-52 for FFM, 0.54 m 

7 DIVATOR reg. mask hose 30 645-51 0.8 m 

8a O-ring for #16 with UNF3/8" 460 190 529 10 x 336 920 009 

8b O-ring for #16 with BSP1/8" 460 190 599 10 x 336 900 272 

9 O-ring 336 190 228 10 x 336 900 007 

10 Breathing valve supply hose 460 190 560 0.75 m 

11 Extra air manifold, E-10 346 190 040 

12 O-ring for #11 336 190 228 10 x 336 900 007 

13 O-ring 336 190 236 10 x 944 610 205 

14 Protective cap strap 88 208-51 Single pack 

15a Octopus hose 99 007-53 UNF 3/8", 1 m 

15b DIVATOR second breath. hose 99 007-51 UNF 3/8", 1.7 m 

15c Octopus hose 99 007-52 UNF 3/8", 1.13 m 

16 O-ring 336 190 311 10 x 944 610 206 

4 

19 

7 

6 

MkIII HoSES 

19 

10 

13 

14 

11 

15a 

8a 16 8a 

17 

18 

30 

16 

19 

19 

4 

9 

15b/c 

16 

19 

22 

25 

20 

21 

8a/b 


17 Hose w. quick connector female 88 197-51 Euro con. Octopus, 0.49m 

18 DIVATOR reg. Octopus hose 30 644-51 For Octopus, 1.12m 

19 O-ring 336 190 237 10 x 336 900 099 

20 Holder strap, extra air manifold 99 099-51 

21 Holder strap 460 190 561 

22 DIVATOR second breath. hose 99 007-51 UNF 3/8", 1.7 m 

23 Non return valve complete 346 190 223 

24 O-ring for #26 346 190 069 10 x 944 610 210 

25a Dry suit inflation hose UNF 3/8 " 97 474-53 0.75 m locked 

25a Dry suit inflation hose UNF 3/8 " 97 474-63 0.75 m unlocked 

25a Dry suit inflation hose UNF 3/8 " 97 474-54 1 m locked 

25a Dry suit inflation hose UNF 3/8 " 97 474-64 1 m unlocked 

25b Dry suit inflation hose BSP 1/8" 97 474-51 0.55 m locked 

25b Dry suit inflation hose BSP 1/8" 97 474-61 0.55 m unlocked 

25b Dry suit inflation hose BSP 1/8" 97 474-52 0.75 m locked 

25b Dry suit inflation hose BSP 1/8" 97 474-62 0.75 m unlocked 

26 Quick coupling 96 531-51 

27 Cone with. O-ring 460 190 369 

28a BC inflation hose, UNF 3/8" 336 291 131 1.15 m 

28b BCW inflator hose, UNF 3/8" 30 411-51 1.15 m 

28 

Hose length 

5 

26 

12 

11 

24 

27 

23 

Service kit see page 28

6 1 

PRESSuRE GAuGE ASSEMbLy 

5 


1 High pressure hose 460 190 724 0.75 m 

2 Pressure gauge cover 99 266-54 

3 O-ring 336 190 235 10 x 944 610 201 

4a Pressure gauge, Bar 99 265-51 

4b Pressure gauge, Psi 99 265-52 


6 O-ring 336 190 221 10 x 944 610 204 

31 

2 

3 

4

1 

3 

2 


1 CDR handle 88 111-51 

2a Plug-in pressure regulator. 88 170-01 1/8" parallel 

2b Plug-in pressure regulator 88 170-02 3/8" 90 degree 

2c Plug-in pressure regulator 88 170-03 3/8" parallel 

3a Relief valve assy. BSP 1/8 460 190 387 

3b Relief valve assy. UNF 3/8 30 660-51 

4 Locking clip see #4 on page 33 

5a Bend protection, CDR 88 113-51 black 

5b Bend protection, DR 88 113-52 nickel-plated 

6 Regulator manifold --- 

7a CDR valve insert 88 120-51 

Incl. O-rings # 20 (x3) & 22 (x2) 

7b CDR valve insert 88 120-61 re-worked 

Incl. O-rings # 20 (x3) & 22 (x2) 

8 Mounting kit, CDR valve 460 190 758 

Incl. screw, spring, steal ball #21& O-ring # 22 

9 Handwheel G5/8" 88 178-51 

10 O-ring 336 190 232 10 x 336 900 044 


23 

12 Inlet filter 346 190 643 10 x 212 100 014 

2 

MkIII REGuLAToR unIT 

20 

5 

7 

15 

4 

21 

22 

32 

6 

16 17 18 

8 

19 

9 10 11 12 13 14 


13 Nipple 460 190 382 

14 O-ring (high pressure) 336 190 272 10 x 331 100 767 

15 O-ring 31 189-51 10 x 31 189-01 

16 Anti freezing cap holder 88 162-51 


18 Anti freezing cover w screw 460 190 763 

19 Anti freezing unit 30 028-51 incl. #15, 16, 17 & 18 

20 O-ring 346 190 021 10 x 346 900 001 

21 Ball, 4 mm 96 599-53 10 x 96 599-03 

22 O-ring 88 137-51 10 x 88 137-01 

23 DR-mode locking ring 88 109-51 10 x 88 109-01 


Service kit Regulator manifold 460 190 717 

- 1 single items of #12 & 14 

- 2 items of 15 & 17

MkIII PLuG-In PRESSuRE REGuLAToR 

A b C 

4 5 

6a 6d 6b 6c 6b 


A Plug-in pressure regulator 88 170-01 1/8" parallel 

B Plug-in pressure regulator 88 170-02 3/8" 90 degree 

C Plug-in pressure regulator 88 170-03 3/8" parallel 

D Plug-in pressure regulator 88 170-04 1/8" parallel + 

back port 

1 Spring 346 190 026 5 x 346 100 005 

2 Piston 460 190 386 

3 O-ring 346 190 022 10 x 346 190 002 

4 Locking clip 88 114-51 10 x 88 114-01 

5 Adjusting screw 460 190 388 5 x 346 100 009 

6 Valve seat set 346 190 023 

7 O-ring and support ring 460 190 198 10 x 346 900 001 + 

95 471-01 

8 O-ring 460 190 728 10 x 944 610 218 

9 O-ring 346 190 024 10 x 346 900 004 

10 Regulator housing - 

11 Protective band 346 190 053 10 x 346 100 066 

12a Relief valve assy. BSP 1/8 460 190 387 compl. 

12b Relief valve assy. UNF 3/8 30 660-51 compl. 

13 O-ring 336 190 311 10 x 944 610 206 

14a Regulator cover, 2-port 88 193-51 1/8" parallel 

14b Regulator cover, 2-port 88 193-52 3/8" 90 degree 

14c Regulator cover, 2-port 88 193-53 3/8" parallel 

14d Regulator cover, 2-port 88 193-54 1/8" parallel + 

back port 

6 

d 

1 

33 

7 

8 

2 

10 

9 

3 


Service kit MKIII regulators (2 pcs) 460 190 729 

Pressure regulator 

- Two pieces of items #3, 6, 7, 8, 9, 11 &13, 

11 

12 

13 

14

dIvAToR bCw - wInG TyPE buoyAnCy CoMPEnSAToR 

6 

2 

1 

10 

15 3 

15 16 

7 

8 

4 

5 

6 


1a DIVATOR BCW Small 99 095-01 

1b DIVATOR BCW Medium 99 095-02 

1c DIVATOR BCW Large 99 095-03 

1d DIVATOR BCW X-large 99 095-04 

2a Shoulder strap Small 99 540-01 

2b Shoulder strap Medium 99 540-02 

2c Shoulder strap Large 99 540-03 

2d Shoulder strap X-large 99 540-04 

3 DIVATOR BCW inflator assy. - see page 35 

4 Sternum strap assy. - see page 35 

5 Rip-cord assy w. lead fastener - see page 35 

6 Over pressure valve assy - see page 35 

7 Cummerbund waist panel 99 546-01 pair 

8 Screw set (male & female) - for #7, see page 35 

9a Outer bladder cover assy 99 548-01 incl. #9b & 2 pcs of #6 

9b Inner bladder 99 549-01 not shown 

10 Rail assy. for BCW 99 550-01 compl. incl. mount 

11 Rail for BC 460 190 554 

12 DIVATOR BCW mount spacer 99 091-51 pair 

13 Screw 99 416-51 10 x 99 416-01 

14 Locking assy 99 551-01 

15 BCW velcro holder spare kit 460 190 923 1 x 30 640-01 + 1 x 30 640-02 

16 Strap separator hook, kit 460 190 924 

9 

17 Elastic cord loop - not shown, see page 35, item #10 

34 

11 

11 

14 

13 

13 

12 

12

1 

2 


1 Mouthpiece 99 567-51 5 x 99 567-01 

2 BCW inflator 99 541-51 

3 DIVATOR BCW 30 144-51 

Flange valve cap 

4 Cylinder connector for BCW 99 927-01 


6 BCW exhaust valve gasket 88 444-51 5 x 88 444-01 

7 O-ring 336 190 272 10 x 331 100 767 

8 Over pressure valve assy 99 545-01 

9 Rip-cord assembly 99 543-51 

10 Elastic cord loop 99 431-51 5 x 99 431-01 

bCw - ACCESSoRIES 

2 

6 

8 

14 

13 

35 

15 

3 

9 

12 

4 


6 

11 Screw kit, male & female 99 547-51 10 x 99 547-01 


Inflator hose 


Full inflator hose assy. 

14a Mesh Weight Pouch 18 lbs 30 047-01 

14b Mesh Weight Pouch 12 lbs 30 048-01 

15 Sternum strap assy. 99 542-51 

7 

5 

10 

11

Cw - ExHAuST vALvE ASSEMbLy 

1 

2 3 4 


1 BCW exhaust valve gasket 88 444-51 5 x 88 444-01 

2 O-ring, remote exhaust valve 99 571-51 10 x 99 571-01 

3 Non return exhaust valve 99 572-51 

4 Cap for exhaust valve 99 573-51 

36

9 

1 

HARnESS - SInGLE & CyLIndER PACk 

2 

5, 11 


• Harness, cylinder pack 97 430-02 stainl. steel buckles 

• Harness, cylinder pack 336 190 975 

• Harness, single 100-140mm 336 190 976 

• Harness, single 140-183mm 336 190 977 

1 Shoulder straps 460 190 524 

2 Hip belt buckle assy 346 190 112 

3 Webbing buckle 460 190 373 2 x 336 100 115 

4 Backplate 460 190 590 

5 Clamping plate 460 190 302 10 x 336 100 691 

6 Hook 460 190 572 

7 Hook 460 190 573 

8 Buckle assy. left 346 190 318 

9 Buckle assy. right 346 190 319 

10 Locking nut 336 190 453 10 x 336 900 184 

11 Screw 460 190 575 10 x 941 217 323 

3 

1 

8 

10 11 

7 

3 


12 Strap separator hook 336 100 572 

13 Locking arm assy 460 190 191 

14 Cylinder bracket, blank 336 190 585 

15 Washer 336 190 261 10 x 944 482 146 

16a Cylinder strap, single 100-140mm 336 190 575 

16b Cylinder strap, single 140-183mm 336 190 828 

17 Threaded washer 460 190 576 

18a Handle, single 100-140mm 336 190 836 

18b Handle, single 140-183mm 336 190 838 

19 Rubber bushing 460 190 597 

• Single cylinder mounting kit 336 190 837 

Single cylinder 100-140mm 

incl. (3 x #11), #16a, 17 &18a 

• Single cylinder mounting kit 336 190 839 

Single cylinder 140-183mm 

incl. (3 x #11), #16b, 17 &18b 

17 

12 

11 

13 

18 

19 

4 

14 

6 

16 

15 

11 

11

16 

9 

18 

3 


• Harness, cylinder pack 30 650-01 

1 Shoulder straps 460 190 524 

2 Hip belt buckle assy 346 190 112 

3 Webbing buckle 460 190 373 2 x 336 100 115 

4 Backplate 460 190 590 

5 Clamping plate 460 190 302 10 x 336 100 691 

6 Hook 460 190 572 

7 Hook 460 190 573 

8 Buckle assy. left 346 190 318 

9 Buckle assy. right 346 190 319 

1 

10 Locking nut 336 190 453 10 x 336 900 184 

2 

HARnESS PRo 

1 

18 

3 

5, 11 

16 

8 

3 

4 

10 11 

7 


11a Screw 460 190 575 10 x 941 217 323 

11b Screw M5 x 10, 10 pack 346 190 190 for use with #17 

12 Strap separator hook 336 100 572 

13 Locking arm assy. 460 190 191 

14 Cylinder bracket, blank 336 190 585 

15 Washer 336 190 261 10 x 944 482 146 

16 D-ring angled 40 mm 30 636-51 4 x 30 636-01 

17 Octopus hose holder kit 30 643-51 

18 BCW velcro holder spare kit 460 190 923 pair 

12 

13 

6 

14 

17 

15 

11

1 

CyLIndER STEEL - SInGLE 316 

2 


1 Cylinder boot 460 190 462 2 pack 

2 Label DIVATOR MKII 336 100 467 

3a O-ring* M18x1,5 460 190 304 10 x 336 900 338 

3b O-ring* M17x1,5 460 190 331 10 x 96 796 

4 Cylinder valve, DIN 90°* 98 430-13 

3 

3 

* Spare parts intended for organizations 

certified to perform periodic cylinder 

inspections. 

4

20 

3 

21 

5 

11 

9 

CyLIndER STEEL - PACk 324 

5 

11 

21 


15 

1 INTERSPIRO label 460 190 230 10 x 95 849-01 

2 Screw 336 190 241 10 x 941 104 372 

3 Guide washer 460 190 472 2 x 336 100 072 

4 Screw 336 190 243 10 x 941 104 376 

5 Screw, MC6S M6x30 460 190 579 2 x 941 104 374 

6 Gasket* 460 190 301 10 x 336 100 305 

7 Spacer bushing 460 190 482 2 x 336 100 073 

9 Cylinder boot 460 190 460 2 x 331 100 362 

10 Cross over tube* 336 190 294 

11 Retaining plate 460 190 468 10 x 336 100 071 

12 Clamping strap 460 190 464 

13 Spacer 336 190 06 

13 

5 

7 

3 

12 

15 

15 

1 

13 

40 

17 



inspections. 

7 

2 

19 

2 

4 

5 

16 

19 

15 

12 

6 

6 

4 


14 Nipple* 460 190 582 

15 Protective ring 460 190 219 10 x 336 100 068 

16a Handle assy. 324, 30 mm neck 460 190 535 

16b Handle assy. 324 27 mm neck 331 190 948 

17 Nut 336 190 244 10 x 941 680 316 

18 Cylinder valve* 98 420-12 

19a O-ring* M18x1,5 460 190 304 10 x 336 900 338 

19b O-ring* M17x1,5 460 190 331 10 x 96 796 

20 Clamping strap assy. 336 190 146 

18 

21 Spacing washer 460 190 470 10 x 336 100 226 


Sealing kit, Cross over tube 460 190 735 

- 2 single items of #6, 19a & 19b 

14 

10 

16 

2

3 

11 

9 

15 

CyLIndER STEEL - PACk 326 

8, 5 



2 Screw 336 190 241 10 x 941 104 372 

3 Guide washer 460 190 512 2 x 336 100 975 

4 Screw 336 190 243 10 x 941 104 376 

5 Washer 460 190 580 2 x 944 482 153 

6 Gasket* 460 190 301 10 x 336 100 305 

7 Spacing rod 460 190 620 

8 Screw 460 190 581 2 x 336 900 339 

9 Cylinder boot 96 513-51 2 x 95513-01 

10a Cross over tube* 460 190 473 

10b Cross over tube* 88 195-52 for Easy-Fill 


12 Tension strap 96 500-51 2 x 96 500-01 

13 Spacer 331 100 475 

13 

3 

7 

11 

12 

15 

15 

1 

13 

41 

17 

2 



inspections. 

19 

2 

4 

8, 5 

16 

19 

15 

12 

6 


14 Nipple* 460 190 582 

15a Cylinder ring assy Divator 326 460 190 533 

Including single items of 3, 5, 8,11 & 13 and dual items of 11 & 15 

15b Protective ring 460 190 219 10 x 336 100 068 

16 Handle section 460 190 583 2 x 331 100 471 

17 Nut 336 190 244 10 x 941 680 316 


19a O-ring* M18x1,5 460 190 304 10 x 336 900 338 

19b O-ring* M17x1,5 460 190 331 10 x 96 796 

27 Easy-Fill valve 88 169-51 

18 

28 Plug w. O-ring 460 190 220 Incl. #29 

29 O-ring 336 190 220 10 x 944 610 309 


14 



6 

10 

27 

4 

29 

28 

16 

2

3 

CyLIndER CoMPoSITE - PACk 323.4 

22 


• Cylinder pack 2x3.4L, PED 98 853-01 

• Cylinder pack 2x3.4L, DOT 98 853-02 

1 Spacing rod 97 501-51 

2 Screw 336 190 241 10 x 941 104 372 

3 Guide washer 460 190 472 2 x 336 100 072 

5 Screw 97 506-52 10 x 97 506-02 

6 Gasket* 460 190 301 10 x 336 100 305 

8 Screw 97 506-53 10 x 97 506-03 

9 Nut 97 507-51 10 x 97 507-01 

10 Weight shaft 97 502-51 10 x 97 502-01 

12 Clamping strap 3.4L 460 190 465 

13 Spacer 460 190 474 2 x 356 100 004 

14 Washer 460 190 624 10 x 356 100 008 

15 Protective ring 460 190 219 10 x 336 100 068 

16 Handle assembly 356 190 019 incl. #2, 17 & 23 

5 

9 

1 

3 

12 

10 

25 

15 

17 

42 

2 

8, 14 

19 



inspections. 

24 

23 

16 

19 

12 

18 

13 


17 Nut 336 190 244 10 x 941 680 316 


6 

20 

6 

19a O-ring* M18x1,5 460 190 304 10 x 336 900 338 

19b O-ring* M17x1,5 31 115-51 10 x 31 115-01 

20 Nipple* 460 190 626 

21 Cross over tube assy* 460 190 313 incl. #6 


23 Screw 97 506-52 10 x 97 506-02 


25 Anti slide protection 460 190 467 4 x 356 100 011 

26 Sealing cone assy 95 601-01 Not shown 




21 

16 

2

3 

11 

7 

22 

CyLIndER CoMPoSITE - PACk 326.7 


• Cylinder pack 2x6.7L, PED 98 857-01 

• Cylinder pack 2x6.7L, DOT 98 857-02 

• Cylinder pack 2x6.7L, Easy-fill 98 857-04 PED approved 

1 Spacing rod 97 501-51 

2 Screw 336 190 241 10 x 941 104 372 

3 Guide washer 97 857-52 

4 Guide washer 97 857-51 

5 Screw 336 190 243 10 x 941 104 376 

6 Gasket* 460 190 301 10 x 336 100 305 

7 Screw 97 825-51 10 x 97 825-01 

8 Screw 97 506-51 1 x 97 506-01/-02 

9 Nut 97 507-51 10 x 97 501-01 

10 Weight shaft 97 502-51 


12 Tension strap 97 513-51 

15 

13 

5 

8, 14 

4 

9 

11 

15 

12 

10 

25 

15 


17 Nut 336 190 244 10 x 941 680 316 


19a O-ring* M18x1,5 460 190 304 10 x 336 900 338 

19b O-ring* M17x1,5 460 190 331 10 x 96 796 

20 Nipple* 96 412-51 

21a Cross over tube* 97 358-051 

21b Cross over tube* 88 195-51 for Easy-Fill 


23 Screw 336 190 243 10 x 941 104 376 


25 Anti slide protection 97 510-51 4 pack 

26 Sealing cone assembly* 98 813-01 Not shown 

27 Easy-fill valve 88 169-51 


29 O-ring 336 190 220 10 x 944 610 309 

13 Spacer 460 190 474 2 x 356 100 004 

14 Washer 460 190 624 10 x 356 100 008 


15 Protective ring 460 190 219 10 x 336 100 068 Sealing kit, Cross over tube 460 190 735 

16 Handle assembly 460 190 689 incl. #2, 17 & 23 


43 

1 

17 

2 

8, 14 

19 

24 

2 



inspections. 

23 

15 

16 

19 

12 

18 

13 

6 

20 

6 

21 

23 

16 

27 

28 

29 

2

Two TyPES of CyLIndER vALvE 

IMPoRTAnT noTICE 

The are two different types of the cylinder valve, Type I and Type II. 

Cylinder valves delivered under part numbers "98xxx" are Type II. 

Deliveries of Type II cylinder valves commenced in July 2005. 

Type II cylinder valves can be identified by the marking with Interspiro 

logotype, see #1 in picture below. Furthermore the marking #2 according to 

picture below always beginning with "98xxx", defining the partnumber of the 

cylinder valve. 

Type I cylinder valves have no logotype marking according to #1 in picture 

below. 

Type I cylinder valves can have different markings according to #2 in picture 

below, but never beginning with "98xxx". 

For spare parts to Type I cylinder valves see page 45. 

For spare parts to Type II cylinder valves see page 46. 

44 

2 

1

10 


A Cylinder valve, Type I 95 866-51 for 316 

1 Valve slug 336 922 108 5 x 336 190 032 

2 Valve stem 460 190 355 

3 Gland seal 336 190 260 10 x 336 100 053 

4 Gland nut 460 190 356 

5 O-ring 336 190 221 10 x 944 610 204 

6 Washer 336 922 104 10 x 336 100 057 

7 Spring 336 922 105 10 x 336 100 058 

8 Hand wheel 460 190 243 

9 Screw 336 190 297 10 x 331 900 064 

10 Washer 336 190 296 10 x 336 900 008 


12 Discharge plug/Drain plug 331 190 800 

13 O-ring 336 190 220 10 x 944 610 309 

14 Cylinder support 346 190 230 10 x 336 100 081 

CyLIndER vALvE 

Cylinder valve Type I * Spare parts intended for organizations 


inspections. 

9 

22 

8 

7 

6 

14 

5 4 3 2 

A 

45 

16 

15 

1 

13 


15 O-ring 460 190 304 10 x 336 190 221 

16 Blank plug 460 190 358 

17 Burst disc rubber plug 336 190 262 10 x 150 040 998 

18 Burst plug, 300 Bar* 331 100 176 

19 Burst disk kit* 460 190 225 

20 Valve stem set 336 190 298 Incl. #2, 9 &10 

21a O-ring for M17 x 1,5* 460 190 331 10 x 96 796-01 

21b O-ring for M18 x 1,5* 460 190 304 10 x 336900338 

22 Hand wheel cover, black 460 190 359 5 x 336 100 061 


Service kit for 1 Cylinder valve, Type I 460 190 914 

- 1 single item of each of #1, 3 & 5 

Service kit for 10 Cylinder valve, Type I 460 190 915 

- 10 Items of service kit 460 190 914 

11 

12 

17 

18 

19 

21

CyLIndER vALvE & EASy-fILL vALvE 

Cylinder valve Type II 

1 2 3b 4 5 6 7 8 9 10 11 

3a 

Easy-Fill valve 


A Cylinder valve, Type II 98 420-08 for 326,7 

Cylinder valve, Type II 98 420-10 for 324 & 326 

Cylinder valve, Type II 98 420-14 for 323,4 

B Easy-fill valve complete 88 169-51 

1 Screw 336 190 297 10 x 336 900 094 

2 Washer 336 190 296 10 x 336 900 093 

3a Hand wheel assy, black 460 190 243 

3b Hand wheel cover, black 460 190 359 5 x 336 100 061 

4 Spring 336 922 105 0 x 336 100 058 

5 Washer 336 922 104 10 x 336 100 057 

6 Gland nut 97 852-51 

7 Back-up ring 97 847-51 10 x 97 847-01 

8 O-ring 97 851-51 10 x 97 851-01 

9 Glide washer 97 853-51 10 x 97 853-01 

10 Valve stem 97 849-51 

11 Valve slug 97 850-51 

12 Valve housing --- 

13 Burst disk plug* 97 399-51 

14 Burst disc* 97 740-51 

15 

14 

21 

b 

23 

13 

20 

22 

25 

24 

A 

46 



inspections. 

17 


15a O-ring for M18 x 1,5* 460 190 304 10 x 336 900 338 

15b O-ring for M17 x 1,5* 31 115-51 10 x 31 115-51 

16 Plug w. O-ring 460 190 220 incl. #18 

17 O-ring 336 190 220 10 x 944 610 309 

18 Discharge plug (DIN) 331 190 800 

19 Protective plug strap 88 205-51 

20 Sealing -- Part of service kit 

21 Sealing cone -- Part of service kit 

22 O-ring -- Part of service kit 

23 Valve housing 88 165-51 

24 O-ring -- Part of service kit 

25 Plug 88 166-51 

16 

19 

# SPARE PART ORDER # 

Service kit for "Easy-fill" 460 190 732 

- 1 single item of each of # 20-22 & 24 

Service kit for 1 cylinder valve type II 460 190 686 

- 1 single item of each of #7, 8, 9 & 11 

Service kit for 10 cylinder valves type II 460 190 687 

- 10 items of spare part kit 460 190 686 

12 

18 

13 

14 

15

CyLIndER PACk wEIGHTS 

1 2 

5 


• Weight, 13.8 kg 97 520-11 For 326.7 incl. 1 pcs of #1 & #8, 2 pcs of #2 & #7 

• Weight, 11.4 kg 97 520-12 For 325, 326.7 incl. 1 pcs of #1 & #8, 2 pcs of #3 & 7 

• Weight, 9.3 kg 97 520-13 For 323.4 Incl. 1 pcs of #1 & #8, 2 pcs of #4 & #7 

1 Weight, upper, 7.2 kg 97 521-51 

2 Weight, lower, 3.3 kg 97 522-51 



5 Weight substitute 97 869-51 

6 Weight substitute 97 869-52 

7 Screw 97 528-51 2 x 97 528-01 

8 Hair pin assy. 460 190 570 

9 Handle protection kit 88 199-51 2.6 m 

6 

4 

3 

4 

9 

7 

8 

7

3 

6 

1 

wEIGHT SySTEM 

3 

2 


1 Leg weight pocket 460 190 863 without weights 

2 Buckle, complete (male/female) 460 190 766 6 x 336 900 406 

3 Screw 336 190 439 10 x 941 134 224 

4 Weight stabilizer 88 356-51 5 x 88 356-01 

5 Weight holder excl. weights 88 350-51 

6 Chest weight pocket 88 135-01 (without weights) 

7 System weights, 450 gram 81 487-51 

4 

7 

4 

5

a 

b 

1 

2 

3 

4 

5 

6 


12 

1 Surface panel box --- 

2 Whistle insert --- See page 51 

3 Shuttle insert --- See page 52 

4 Hose --- See page 53 

5 Venting insert --- See page 55 

6 Connection manifold --- See page 56 

7 Valve block --- See page 50 

8a Label 97 046-51 English 

8b Label 97 046-52 Swedish 

8c Label 97 046-63 German 

8d Label 97 046-99 US English 

9 Plug, R5/8” parking 96 718-51 

10 Screw 96 723-51 10 x 96 723-01 

dP1 SuRfACE PAnEL 

4 


11 Plug, R5/8” 95 198-51 

12 T-piece 300 Bar/4350 Psi --- See page 58 

# SERVIcE KIT ORDER # NOTES 

Service kit for 1 Surface unit 460 190 701 

One year maintenance 

- 3 single service kits, HP Conn. 460 190 711 page 54 

Service kit for 1 Surface unit 460 190 702 

Six year maintenance 

- 3 single service kits - HP Conn. 460 190 711 page 54 

- 1 single service kit - Shuttle insert 460 190 712 page 52 

- 1 single service kit - Venting insert 460 190 713 page 55 

- 1 single service kit - Whistle 460 190 323 page 51 

8 

7 

11 

10 

9

1 

17 

16 

2 

3 

4 

5 

6 

7 

20 

dP1 vALvE bLoCk 

15 

14 

8 9 11 10 


1 Valve block, single assy 346 190 329 

2 Hand wheel connect. 460 190 385 

3 O-ring 336 190 232 10 x 336 900 044 


5a Filter 346 190 643 10 x 212 100 014 

5b —||— 346 190 644 100 x 212 100 014 

6a O-ring 336 190 272 10 x 331 100 767 

6b —||— 460 190 237 100 x 331 100 767 

7 Nipple 460 190 382 

8 Cylinder support 346 190 230 5 x 336 100 081 

9 Valve block manifold --- 

10 Gasket set 336 190 159 

11 Sleeve 336 100 832 

12a Pressure gauge, Bar 460 190 919 Incl. #10 

12b Pressure gauge, Psi 460 190 918 Incl. #10 

50 

18 

19 


13a Rubber cover 99 266-52 

13b Rubber cover 96 548-51 For 460 190 381 & ..715 

14 Screw 96 723-51 10 x 96 723-01 

15 Washer 336 190 261 10 x 944 482 146 

16 Nut 336 190 244 10 x 941 680 316 

17 Screw 336 190 243 10 x 941 104 376 

18 Screw 96 723-52 10 x 96 723-02 

19 Sleeve 99 226-51 10 x 99 226-01 

20a Plug R5/8” 95 198-51 

20b —||— 460 190 077 5 x 95 198 


Service kit for one HP Connection 460 190 711 

Surface unit 

- 1 single items of each of #5/6 

12 

13

5 

12 4 13 


dP1 wHISTLE InSERT 

8 

3a 3b 3c 

• Whistle insert (55 bar) 460 190 143 Not incl. #9 & 10 

1 Nozzle with o-ring 346 190 220 Incl. #6 

2 Regulating piston 346 190 219 Incl. #7 & 14 

3 Piston assy. 346 190 216 Incl. #8 

4 Sealing label 346 190 296 20 x 97 081-01 

5 Whistle assy. 346 190 221 

6 O-ring 346 190 251 10 x 346 900 016 

7 O-ring 346 190 249 10 x 346 900 014 

8 O-ring 336 190 240 5 x 331 100 562 

9 Locking clip 346 190 293 10 x 346 100 158 


11 Spring 346 190 218 5 x 346 100 082 

3 

1 2 

6 7 

51 

14 

11 

15 


12 Whistle cylinder 346 190 248 

13 Sealing cone 346 190 217 10 x 346 100 081 

14 O-ring 460 190 269 10 x 346 900 015 

15 O-ring & back up rings 460 190 200 

10 x 346 900 017 & 95 473-01 


Service kit for one Whistle 460 190 323 

Surface unit 

- 1 single item of each of #4/6-10/13-15 

10 

9

dP1 SHuTTLE InSERT 

1 2 3 4 



2 Locking clip 346 190 293 10 x 346 100 158 

3 Shuttle kit 460 190 750 

4 O-ring 336 190 220 10 x 944 610 309 

5 O-ring 336 190 312 10 x 336 900 105 

6 Shuttle insert 460 190 709 

a b c 

6 

5 

52 


Service kit for 1 Shuttle insert 460 190 712 

Surface unit 

- 1 single item of each of #1-3 

- 2 single items of each of #4 & 5

1 2 3b-3h 

8 

dP1 HoSE & RELIEvInG LooP 

3a 2 


4 

1 Connection R5/8” 96 721-51 300 Bar, for 3b-3g 

2 O-ring 336 190 312 10 x 336 900 105 

3a Hose 96 116-51 1 m, Incl. #2 

3a —||— 96 116-61 2 m, Incl. #2 

3a —||— 96 116-62 3 m, Incl. #2 

3b —||— 99 086-02 60 m, Incl. #2 & 4 

3c —||— 99 086-03 70 m, Incl. #2 & 4 

3d —||— 99 086-04 30 m, Incl. #2 & 4 

3e —||— 99 086-05 120 m, Incl #2 & 4 

3f —||— 99 086-06 10 m, Incl #2 & 4 

3g —||— 99 086-07 90 m, Incl #2 & 4 

3h —||— 99 086-08 80 m, Incl #2 & 4 

4 Relieving loop 96 726-51 2 x 96 726-01 


6 Hose bend restrict. kit 460 190 917 Incl. 2 single items of #2 

7 Vulcanizing tape 97 045-51 10 m. 

8 Protective plug 97 039-51 10 x 97 039-01 

53 

7 

5 

6 

2


1 Connection manifold 96 786-51 

2 Hand wheel connection 460 190 385 

dP1 ConnECTIon MAnIfoLd 

3 O-ring 336 190 232 10 x 336 900 044 


5a Filter 346 190 643 10 x 212 100 014 

5b —||— 346 190 644 100 x 212 100 014 

6a O-ring 336 190 272 10 x 331 100 767 

6b —||— 460 190 237 100 x 331 100 767 

7 Nipple 460 190 382 

1 

2 3 4 5 6 7 

54 


Service kit for one HP connection 460 190 711 

Surface unit 

- 1 single item of each of #5 & 6

dP1 vEnTInG InSERT 

1 2 

3 4 



2 Locking clip 346 190 293 10 x 346 100 158 

3 O-ring 336 190 220 10 x 944 610 309 

4 Venting screw 460 190 751 

5 Venting valve, 300 Bar 460 190 916 Incl. #1-4 

5 

55 


Service kit for one Vent insert 460 190 713 

Surface unit 

- 1 single item of each of #1-3

6 

1 2 3 4 5 7 8 10 

20b 

21 

11 

9 

14 15 


1 Anti freezing cover 460 190 523 


3 Hose clamp 460 190 526 

16 

12 

13 

20a 

17 18 

4 Sealing plate 336 190 256 25 x 336 100 035 

5 Adjustment screw 460 190 425 5 x 336 100 127 

6 O-ring 336 190 231 10 x 336 900 043 

7 Seat, regulator 460 190 591 10 x 336 100 126 

8 Spring 346 190 028 5 x 336 100 280 

9 Supporting washer 336 190 637 10 x 336 100 131 

10 O-ring 336 190 233 10 x 336 900 045 

11 Valve seat set 460 190 648 Incl. #6-10 

12 Nipple, P+ regulator --- 

13 O-ring 336 190 232 10 x 336 900 044 

14 O-ring 336 190 221 10 x 944 610 204 

15 Blind plug 460 190 752 

16 Relief valve, 17 Bar 96 724-51 Incl. #17/18 


18 O-ring 336 190 311 10 x 944 610 206 

19 O-ring 336 190 312 10 x 336 900 105 

dP1 REGuLAToR, P+ 

19 

56 

20b 

30 

22 23 24 25 26 


20a Control spring 460 190 484 5 x 330 100 048 

20b Control spring 96 722-51 5 x 96 722-01 

21 Piston 460 190 420 

22 O-ring 336 190 230 10 x 336 900 042 

23 Stop ring 460 190 424 5 x 336 100 049 

24 Diffuser 460 190 564 

25 O-ring 336 190 229 10 x 336 900 041 

26 Cover, P+ regulator --- 

27 O-ring 336 190 238 10 x 944 610 207 

28 Quick coupling cover 460 190 753 5 pack 

29 Quick coupling 460 190 754 

30 Regulator, MKII P+ 96 720-51 


Service kit, DIVATOR P+ regulator 460 190 703 

Six year maintenance for one 

DIVATOR P+ regulator 

- 1 single item of each of #2, 4, 6, 7, 10, 17, 19, 22 & 25 


28 

27 

29

1 

4 

dP1 ACCESSoRIES 

2 

5 

5 

7 6 


1 Sign “OPEN” 97 335-51 

2 Pressure relief handle 97 373-51 

3 Carbine hook 336 921 843 stainless steel 

4 Safety belt 96 741-51 

5 Hose winding frame kit 96 745-12 Std size, incl. straps 

6 Strap, hose retaining 97 859-51 T-shape 

7 Strap, hose retaining 97 860-51 

8 W-frame coupling 99 366-51 for old version of winding frame 

3 

8

1 

dP1 T-PIECE 

1b 


1a T-piece, curved 346 190 093 300 Bar/4350 Psi 

1b T-piece, straight 30 030-51 300 Bar/4350 Psi 

2 O-ring, 300 Bar/4350 Psi 336 190 232 10 x 336 900 044 

3 Connection nipple, 460 190 493 300 Bar/4350 Psi 

4 Hand wheel cover 460 190 483 5 x 336 200 036 

5 Hand wheel 460 190 495 300 Bar/4350 Psi 

6a O-ring 336 190 272 10 x 331 100 767 

6b —||— 460 190 237 100 x 331 100 767 

7 Nipple 460 190 497 300 Bar/4350 Psi 

2 

5 

3 

4 

5 

6 

7

TooLS 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 

26 

# TOOL ORDER # 

1 Control gauge, DIN 300 bar 99 804-01 

Psi 4350 psi 99 804-02 

2 Silicone lubricant 331 900 269 

3 Lubricant for cylinder valves 331 900 268 

4 Locking compound 331 900 035 

5 Krytox lubricant 331 900 540 

6 Awl 100 mm 336 900 065 

7 Hexagonal wrench 8 mm T-handle 31 496-51 

8 Hexagonal wrench 5 mm 460 200 008 

9 Screwdriver, PZ-1 460 200 028 

PZ-2 460 200 011 

10 Screwdriver 1 x 5,5 460 190 767 

11 Protective pin 460 190 565 

12 Punch tool 460 190 566 

13 O-ring tool kit 30 042-51 

14 Fixture whistle 346 190 312 

15 Multi-fixture for MKIII 31 270-51 

16 Fixture for P+regulator 460 190 855 

17 Ball hammer - 

18 Torque wrench assy 5-50 Nm 336 190 478 

19 Torque wrench adapter 8 mm 30 223-51 


21 Torque wrench adapter 20 mm 95 998 


23 Torque wrench adapter 13 - 15 mm 460 190 852 



26 Level Bar tool 30 004-51 

27 Filling adaptor DIVATOR Lite cylinder 99 369-01 

27 

5 

19 20 21 

18 

22 23 24 25 

28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 

# TOOL ORDER # 

28 U-spanner, 8 mm 336 100 310 

29 U-spanner, 12 mm 31 236-51 

30 U-spanner, 10 - 13 mm 460 190 774 

31 U-spanner, 14 - 15 mm 336 900 223 

32 U-spanner, 16 - 17 mm 346 900 032 

33 U-spanner, 18 - 19 mm 336 900 029 

34 U-spanner, 20 mm 346 900 026 

35 U-spanner, 23 mm 460 200 009 

36 U-spanner, 24 mm 99 519 

37 U-spanner, 25 mm 331 900 321 

38 U-spanner, 26 mm 31 282-51 

39 Circlip pliers 346 900 041 

40 Long nosed pliers 460 190 772 

41 Piston extractor 99 211-01 

42 Socket, slotted, 19 mm 460 190 567 

43 Socket, Cylinder valve 336 100 752 

44 Socket long, 15 mm 336 900 271 

45 Socket, 5 mm hexagonal 336 900 224 

46 Socket, 8 mm hexagonal 460 190 031 

47 Assembly tool, plug-in reg. 95 925-01 

48 Assembly tool, whistle 95 926-01 

49 Socket, whistle 460 190 849 

50 Locking clip tool 30 550-01 

51 Metal barrel brush 336 900 219 

52 Socket Torx T30 99 533-51 

53 Punch tool, DP1 shuttle valve 31 272-51 

54 Discharge plug (DIN) 331 190 800 

54 

51 

53 

52

CENTRAL EUROPE 

AUSTRIA 

INTERSPIRO GesmbH www.interspiro.de 

Feldbacher Str. 3 A-8200 GLEISDORF AUSTRIA 

TEL +43 (0)311 236 133 FAX +43 (0)311 236 133 22 E-MAIL info@interspiro.de 

GERMANY 

INTERSPIRO GmbH www.interspiro.de 

Postfach 1220 D-76691 FORST/BADEN GERMANY 

TEL +49 (0)7251 8030 FAX +49 (0)7251 2298 E-MAIL info@interspiro.de 

NORTH & SOUTH AMERICA 

INTERSPIRO Inc. www.interspiro-us.com 

10225 82nd Avenue PLEASANT PRAIRIE WI 53158-5801 USA 

TEL +1 262 947 9901 FAX +1 262 947 9902 E-MAIL sales@interspiro-us.com 

UNITED KINGDOM & IRELAND 

INTERSPIRO Ltd. www.interspiro.com 

7 Hawksworth Road Central Park TELFORD Shropshire TF2 9TU UNITED KINGDOM 

TEL +44 (0)1952 200 190 FAX +44 (0)1952 299 805 E-MAIL infouk@interspiro.com 

SCANDINAVIA, ASIA/PACIFIC & MIDDLE EAST 

SWITZERLAND 

SWEDEN 

INTERSPIRO AG www.interspiro.de 

NORDIC & EXPORT SALES DIVISION www.interspiro.com 

Güterstraße 47 CH-4133 PRATTELN SWITZERLAND 

Box 10060 S-181 10 LIDINGÖ SWEDEN 

TEL +41 61 827 99 77 FAX +41 61 827 99 70 E-MAIL info@interspiro.ch 

TEL +46 8 636 51 00 FAX +46 8 636 51 99 E-MAIL info@interspiro.com 

30924D01 

THE NETHERLANDS & BELGIUM 

MALAYSIA 

NO. 

INTERSPIRO BV www.interspiro.nl 

NORDIC & EXPORT SALES DIVISION www.interspiro.com 

Operetteweg 35 NL-1323 VK ALMERE NETHERLANDS 

305 & 305A Lorong Perak Taman Melawati 53100 KUALA LUMPUR MALAYSIA 

TEL +31 (0)36 5363103 FAX +31 (0)36 5384809 E-MAIL infobv@interspiro.com TEL +60 3 4105 8122 FAX +60 3 4105 3122 E-MAIL asiapacific@interspiro.com PART

SPARE PART LIST - Interspiro

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?