Curing Units Curing Units - Dental Supplies

Curing Units 

www.usdentaldepot.com - sales@usdentaldepot.com - 1 1-866-625-5558 - 1-954-874-6325 


ASTRON - 115343 Lab-PRO Curing Unit 220v 

ASTRON - Lab-PRO Digital Curing Unit - 16-18 Flask Capacity - 220VOL - A# 0001 - Capacity: 16 flasks or 8 double cages - Digital 

stainless steel unit ASTRON - Lab-PRO Digital Curing Unit - 16-18 Flask Capacity - 220VOL - A# 0001 Professional Grade 

Curing UnitThe LabPro Digital curing unit is an all stainless steel unit with a very reliable 220 volt system. Its tank holds 16 

flasks or 8 double cages. The all digital electronics mean there are no moving parts to break. It couldn't be made any 

better, see for yourself!Features: * Digital Waterbath * Safety: Auto Shutoff * Stainless Steel Inside & Out * Dual Stage 

Curing * Extra-large capacity holds 16-18 flasks * Longer Life & More Efficient* 220V / 20AMPS * Hold 16 Flasks or 8 Double 

Flasks* Made in U.S.A.* 1 Year Unconditional WarrantyDimentions: 14.5in (Width) X 18.5in (Height) X 19.5in (Length) 

US$ 2,329.42 

KEYSTONE- 114179 Proform Pressure Pail Pot 

Keystone- Proform Pressure Pail Pot - Internal pressure can be generated either hydraulically using water or pneumatically using air 

from a compressor. #9622760 Keystone- Proform Pressure Pail Pot #9622760 

US$ 214.48 

The Proline Pressure Pail has a lot of excellent features that other pressure pots do not. Internal pressure can be generated 

either hydraulically using water or pneumatically using air from a compressor. The Pressure Pail is large enough (6" 

diameter by 6" deep), to hold a standard reline jig or smaller articulator.Easy crank handle, replaceable O-ring, and 

all-aluminum construction makes this pot excellent for curing all types of cold-cured acrylics. Use for repairs, relines, splint 

production, retainers and more. Airline adapter sold separately. 


Boil out Curing units 

BOIL OUT / WASHOUT UNITS ( Handler ) 

HANDLER BOIL OUT / WASHOUT UNITS ( Handler ) 

Stainless Steel Denture Processing System complete with vented cabinet allows the technician to Boil 

out, wash and cure dentures. Design and Manufactured by Handler, the dual tank production system 

with separate temperature controls gives the technician the ability to cure in one tank while using 

another tank to washout or boil out. 

All units specifications : 

* Holds 8 Compressed Flasks or 16 Flasks 

* Built in 18 ga. stainless steel tanks 

* Tank Dimensions: 

* 18in x 14in x 12in deep [46cm x 30cm x 30cm] and 10in x 14in x 10in deep 

* With inside handles 

* 4 Faucets included ( Some models ) 

* Pump for recirculating the water and filter for wax 

* Some models comes complete with handler boilout cabinet #261 included in the price in these cases 

, external dimensions are: 

* Unit Dimensions: 36in wide x 24in deep x 38in high ( 890mm x 590mm x 930mm ) 

Check individual specification in each item description 

AVAILABLE IN 2 CHOICES: 

15/07/2014 / 3916 

1




GAS - Natural or Propane 

ELECTRIC Circuit - 208v, 220v, and 240v 

PLEASE SPECIFY WHEN ORDERING 

You must choose your cabinet color at the moment of purchasing 

Main Item# 26105 

Codes: 

SS: Stainles Steel Cabinet 

W: Wash 

C: Curing 

G : Gas 

EL: Electric 

Full Units with Cabinet 

Code Name Price + 

114928 HANDLER - Boilout/Washout 2 Tanks-Elec US$ 5,791.00 +Info 

100875 HANDLER - Boilout/Washout 2 Tanks-Gas US$ 5,791.00 +Info 

Curing Unit 


114929 HANDLER - Boilout/Curing Double Tank-Ele US$ 3,757.50 +Info 

100874 HANDLER - Boilout/Curing Double Tank-Gas US$ 3,757.50 +Info 

115227 HANDLER - Curing Unit With Cabinet-Gas US$ 5,119.73 +Info 

115228 HANDLER - Curing Unit With Cabinet- Ele US$ 5,119.73 +Info 

Washout Units 


103530 HANDLER - Boilout/washout 2 Tanks-Elec US$ 4,982.50 +Info 

100871 HANDLER - Boilout/washout 2 Tanks-Gas US$ 4,982.50 +Info 

KEYSTONE- 34-1050159 Curing Unit for 8 Flasks 110v 

Keystone Denture Curing Unit - Stainless construction for easy cleaning and anti-corrosion - Can beused 

for both boil out and curing - Thermostatic control for variable holding temperatures - Cures upto 4 double 

flask compresses (8) denture arches UL listed - Valve\spigot for easy emptying of water -110volt - 

1380watts [polymerizator polimerizadoras - Shipping Information: Weight 17lbs -Dimensions : Height 16in x 

width 15in x depth 12in 

US$ 421.78 

HANDLER - 115229 Digital Two Stage Curing Unit 

HANDLER - 210DCU Two Stage Digital Curing Unit - 110vol 50/60Hz - H# 2010DCU - 2-Stage curing unit with a digital control panel 

on which sequences of polymerizing times and temperatures can be programmed as required by user.- Low maintenance and easy 

cleaning. HANDLER - Two Stage Digital Curing Unit ( Boiling Unit ) - 110vol 50/60Hz - H# 2010DCU 

US$ 2,145.92 

The 2010DCU Denture Curing Unit is a sophisticated curing unit which has a circuit breaker (fuse in power inlet) that 

protects the machine against electric overloads. 

2 

15/07/2014 / 3916




FEATURES: 

* 2-Stage curing unit with a digital control panel on which sequences of polymerizing times and temperatures can be programmed as required by user. 

* The time of each step can be set between 0 and 999 minutes. The end temperatures at each plateau can be regulated by the user between 32F and 210F (0C and 

99C). 

* To enable the user to see the actual program status at all times, the curing unit has a synoptic display. 

* Programming. It is extremely easy to program a heating sequence for the water in the tank. 

* Low maintenance and easy cleaning. 

* Holds upto 8 Flasks at a time. 

* Synoptic Progress Display 

Note: This unit is a 2 Stage Curing unit and Boilout Only. 

Weight & Dimentions: 

Unit Dimension: 13.8in H x 16.5in W x 14.9in D ( 350mm x 420mm x 380mm ) 

Tank Dimension: 11in H x 10in W x 10in D ( 280mm x 255mm x 255mm ) 

Weight: 45 lbs [17kg] 

Power Supply: 115V, 50/60Hz, 13A Consumption: 1500 W 

Available in 230V/50/60Hz, 6 Amp Model 2010DCU-E 


Light Curing units 

ECCO- 113897 E300 Curing Light Unit 110v 

Ecco-E300 Curing Light Unit 110volts - Includes four 9 watts bulb - LxWxH: 11 x 7.5 x 4.25 # BQ-300 - Best-Qual Maxi-cure - Ecco- 

BesQual E300 Curing Light Unit #920-E300 -Cures light activated composites-Includes four 9 watts bulb-Heavy duty and 

durable for long lasting use.- Equipped with 5 and10 minute timer- LxWxH: 11 x 7.5 x 4.25 

US$ 250.00 

ECCO - 116083 E300 Curing Light Unit 220v 

Ecco-E300 Curing Light Unit 220volts - Includes four 9 watts bulb - LxWxH: 11 x 7.5 x 4.25 # BQ-300 - Best-Qual Maxi-cure - Ecco- 

BesQual E300 Curing Light Unit #920-E300 220 volts -Cures light activated composites-Includes four 9 watts bulb-Heavy 

duty and durable for long lasting use.- Equipped with 5 and10 minute timer- LxWxH: 11" x 7.5" x 4.25" 

US$ 269.00 

EDG- 100654 LC Strobolux Vac Polim 1200w 

EDG STROBOLUX VACUUM PHOTOPOLYMERIZATOR*Photopolymerizator*Stroboscopic *Fiber*Vacuum*2 Curing Programs*1 

Xenon Bulb*1200WattsCheck the package content:Equipment:1 F 50 molding chamber with sealing membrane and ring;1 alligator 

clip magnetic support;Instruction manual;Warranty.Specification:Power supply tension: 220 Volts 60Hz.Consume: 500 watts 

2,2 Amp.Xenon-type light bulb 

US$ 2,650.00 

SELECT- 1901450 LC Maxi- Cure Lt 4 lamp 110v 

- Maxi-Cure Light - Complete light curing unit with 5 and 10 minute timer - 4 lamps - [11in wide x 5 in dephx 

4.25in deep] - [27.5cm x 12.5cm x10.6cm]- 110vol [S# 1901450] - 1 year warranty - light uses four 9 watt 

bulbs [included] and cures most light activated compsites including megatray - Heavy duty construction 

makes the maxi cure light cure box a reliable way to cure materials - 16x12x10 12lbs 

US$ 260.00 

15/07/2014 / 3916 

3



Light Curing units 

SELECT- 106908 LC Maxi- Cure Lt 4 lamp 220v 

SELECT- Maxi-Cure Light - 220V - complete light curing unit with 5 and 10 minute timer - 4 lamps - ( 11in wide x 5 in deph x 4.25in 

deep ) - ( 275mm x 125mm x106mm ) ( S# 1901452 ) - 1 year warranty - light uses four 9 watt bulbs [included] and cures most light 

activated compsites including megatray - heavy duty construction makes the maxi cure light cure box a reliable way to cure materials - 

16x12x10 12lbs 

EDG- 100655 LED light w/vacuum 830nw 

EDG LED LUX PHOTOPOLYMERIZATOR*LED Light Cure*460-395nm*Vacuum Cure System Included*NO PUMP*Can Cure 

Fiber Reinforced Resins*830nw/cm2 

US$ 310.00 

US$ 1,950.00 

VH- 100833 LED Strbio & UV Light Cur Unit 

VH PHOTON LIGHT CURING LIGHT UNIT*Digital Timer*Set Up of 3 Different Type of Curing Lights* 

Stroboscopic Light*6 LED Lamps*2 Ultraviolet Bulbs*18 Month Warranty -Including Bulbs*Frequency 

50-60HZ*110/220V*Dimensions: 290 x 167 x 232mm*Weight 4.4LB*Power Max: 5Watts*Incorporated 

Pre-Polimerizer LED to Improve and Faclitate work with Resin*Rotational Platform to Guarantee Light Acess to All 

Work 

US$ 950.00 

KEYSTONE- 9634590 ProCure Oven 300 watts Halogen 

Keystone- Pro-Cure Oven 300 watts Halogen 110volts - Light cure oven for dentl laboratory - ( Good for ceromers- lab composites ) 

Dimensions: 12 x 12 x 12 Weight: 15 Lbs- #9634590 Keystone- Pro-Cure Oven 300 watts Halogen 110 volts #9634590- Light 

cure oven for dentl laboratory - ( Good for ceromers- lab composites ) An advanced third generation light curing unit that 

provides superior lightingintensity and excellent depth of cure. The ProCure 300 has been designedto provide the maximum 

in light intensity without the negative heat build up.This new generation light features:- A highly reflective chamber for 

uniform light coverage- A rotating glass platform to ensure uniform light- A built-in fan to maintain optimum temperature to 

eliminate warping- Two powerful halogen bulbs to ensure excellent intensity and depth of cure- A protective welder 

US$ 492.00 

EDG- 110725 Xenon Power(Resin-Fiber-Vac) 

Xenon Power (Resin-Fiber-Vac)-Software version V-1 Able to used two Curing Programs. Program1 Simple 

Photopolymerization-Program 2 Conformation and Photopolymerization Xenon Power 100WDescription:Light curing unit for 

composites(ceramerce, fiber, and resin)- vacuum cured resin, and standard composite or laboratory light cured materials. 

V-1 software versionTwo Curing Programs:Program 1: simple photopolymerizationProgram 2: conformation and fiber 

photopolymerization.2.30, last time programmed in minutes.Includes:AF-50 mirrored mold chamber with membrane and 

sealing ring.A magnetic alligator support.A mirrored plate.Instructions manual.Optional accessories (do not come with the 

Equipment):Vacuum pump (Accessory for under vacuum photopolymerization)Technical Specifications:Feeding tension: 

Bi-volts(110v and 220v)Network frequency: 50/60 HzConsumption: 100 WattsLamps: Noble gases lamp (Xenon 

predominance).Potency = 70WPotency for photopolymerization: 500 mW/cm2 

US$ 1,560.00 


Press Curing Units 1Liter 

LANG- 114112 Aquapres Curing Unit 

LANG - Aquapres Hydraulic Pressure Curing unit for Processing self curing acrylic resins - # 4095A Lang- Aquapres Hydraulic 

Pressure Curing unit for Processing self curing acrylic resins. #4095A 

US$ 210.42 

Improve the quality of the fabrication process. When combining Jet Acrylics and Lang Dentals Aquapres, you can decrease 

undesirable results, which can be time consuming and costly. The complete fabrication system consistently generates 

dependable, high-quality results by eliminating porosity in methacrylate acrylics and achieving long-lasting color.Features: 

Hydraulic, not pneumatic3 Easy-Steps to generate pressureCompact design Benefits:Provides a safer work environment 

4 

15/07/2014 / 3916



Press Curing Units 1Liter 

over air pressure without the need for an air compressor, heat or electricityCreates a dense acrylic for color stable results and increases efficiencyRequires no extra 

attachments, space saving 

EDG- 101394 Polymerizator M500 Bi Volt 

EDG POLYMERIZATOR M500- 110V- Ideal For Polymerizations dry & Inclusions Under Pressure- Dimensions: 

17"x15''x12''- Weight: 26.4 lb 

US$ 1,550.00 


Pressure Post 2 Gal 

ECCO-102525 ECCO-Pres Pt w/Heater 2g 220V 

ECCO-Pressure Pot 8QT(2 Gal) - 220v 

US$ 474.50 

# 102525 Holds up to 6 flask, Made from aluminum 

The ECCO 220volt Pressure Pot features heat control, thermostat and internal gauge. The ECCO Pressure Pot allows for temperature 

and pressure to be modify. 

It also includes a lock valve that allows the airline to be disconnected. 

TECHNICAL 

SPECIFICATIONS 

Maximum strength and pressure from : 

20 - 25 lbs 

Temperature reaches: 200 F (80- 85 C) 

Dimensions: 

18in x 12in x 14in 

Weight: 

10lb 

Power source: 

220 volts 

Flask Capacity: 

6 Flasks 

Water Capacity: 2 Gallons ( 8 Quartz ) 

ECCO-102524 ECCO-Press Pt w/Heater 2g 110V 

ECCO-Pressure Pot 8QT(2 Gal) - 110v 

US$ 474.50 


The ECCO 110volt Pressure Pot features heat control, thermostat and internal gauge. The ECCO Pressure Pot 

allows for temperature and pressure to be modify. 


TECHNICAL 



20 - 25 lbs 


Dimensions: 


Weight: 

10lb 

Power source: 

110 volts 


6 Flasks 


15/07/2014 / 3916 

5



Pressure Post 2 Gal 

CFS- 282106 Press Pot w/Heater 2gal 110v 

Cfs -Pressure Pot 8QT(2 Gal) - 220v 

US$ 492.75 


With heat control, thermostat and internal gauge, this pot allows for temperature and pressure to be modify. It also 

includes a lock valve that allows the airline to be disconnected. 

TECHNICAL 



20 - 25 lbs 


Dimensions: 


Weight: 

10lb 

Power source: 

110 volts 


6 Flasks 



Pressure Pot 1.5 Gal 

ECCO-102522 ECCO-Press Pt W/Heat 1.5g 110V 

ECCO-Pressure Pot 6QT (1.5 Gal) 110v 

US$ 445.50 


The ECCO 220volt Pressure Pot features heat control, thermostat and internal gauge. The ECCO Pressure Pot 

allows for temperature and pressure to be modify. 


TECHNICAL 



20 - 25 lbs 


Dimensions: 


Weight: 

10lb 

Power source: 

110 volts 


4 Flasks 

Water Capacity: 1.5 Gallons ( 6 Quartz ) 

ECCO-102523 ECCO-Press Pt W/Heat 1.5g 220V 

Ecco-Pressure Pot with HEATER - 6QT - 220V - Made from alumunum - Includes a heat controlled thermostat - Internal Gauge - 

Temperatures are # 280-106 [curing unit]ECCO-Pressure Pot 6QT (1.5 Gal) 220v 

US$ 445.50 


The ECCO 220volt Pressure Pot features heat control, thermostat and internal gauge. The ECCO Pressure Pot allows for 

temperature and pressure to be modify. 


TECHNICAL 



20 - 25 lbs 


Dimensions: 


Weight: 

10lb 

220 volts Power source: 

6 

15/07/2014 / 3916



Pressure Pot 1.5 Gal 


4 Flasks 


CFS- 280106 Pres Pot w/Heater 1.5gal 110v 

CFS -Pressure Pot 6QT (1.5 Gal) 110v 

US$ 465.75 


With heat control, thermostat and internal gauge, this pot allows for temperature and pressure to be modify. 


TECHNICAL 



20 - 25 lbs 


Dimensions: 


Weight: 

10lb 

Power source: 

110 volts 


4 Flasks 



Pressure Pot No Heater 

HANDLER- 112909 448PP - 8qt Pressure Pot N/hea 

#448PP HANDLER - 8quarters Pressure Pot No/Heater - Aluminum made - with air hose to conect the compressor. holds 3 cases - ( 

CURING UNIT ) 8 Quart Pneumatic Curing Vessel-Pressure Pot # 448PP448PP - 8 QT PNEUMATIC CURING 

VESSEL/PRESSURE POT 

US$ 267.70 

An 8 Quart Pneumatic Curing Vessel-Pressure Pot. Made of sturdy cast aluminum, The new 448PP pressure vessel is built to 

provide 20 psi pressure* - while the acrylic resin is curing - forming a dense crosslinked repair for the dentist and patient. 

TECHNICAL 


Shipping Weight 12lb ( 5.4kg ) 

Unit Dimensions 

19in Length x 8in High x 6in Depth 

Outer Diameter 

11in 

Inner Diameter 

9/34in 

Max Internal Pressure with safety Valve 

22 psi 

The 448PP will not only allow for proper denture repair and relines, but will also double as a substitute curing 

pot-accommodating a 2-case bronze compress with the cover removed. The 448PP is shipped complete with pressure gauge, 

safety valve, air valve to introduce air into the pot, plus an air hose ready to connect to your compressor air source. 

ECCO- 114962 ECCO-Heater for Press Pot 

ECCO-Heater for Press Pot -6Qt & 8Qt with no heater originally - Can be used as a heater for the units that do not have heater originally - # OV120 

[curing unit] 

US$ 45.00 

15/07/2014 / 3916 7



Pressure Pot No Heater 

ECCO-102521 ECCO-Press Pot No/Heater 1.5ga 

ECCO 6 Quart Press Pot No/Heater The ECCO Press Pot Holds upto 6 Flasks. 

US$ 174.53 

FEATURES: 

Made in the U.S.A. Holds Upto 6 flasks High quality aluminum. Available With input for air line. Available in 

6 and 8 quart models. Available with Internal electric heating or to be used on a gas stove 

An ECCO 6 Quart Pres Pot. Made of sturdy cast aluminum, 20 psi pressure* while the acrylic resin is curing - 

forming a dense crosslinked repair for the dentist and patient. 

TECHNICAL 


Weight: 12lb ( 5.4kg ) 

Power source: 

Need to use warm to hot water and a compressor when working with this 

product 


6 Flasks 


ECCO- 114961 ECCO-Press Pot No/Heater 2gal 

Ecco- Pressure Pot no/ Heater - 8Qt - Made from aluminum - Holds up to 8 flasks - Need to use warm to hot water and a compressor 

when working with this product ( J# OV106 ) Also available with automatic air regulator and heater - ask sales associate for details - 

[curing unit]ECCO 8 Quart Press Pot No/Heater The ECCO Press Pot Holds upto 8 Flasks. 

US$ 194.00 

FEATURES: 

Made in the U.S.A. Holds Upto 8 flasks High quality aluminum. Available With input for air line. Available in 6 and 8 

quart models. Available with Internal electric heating or to be used on a gas stove 

An ECCO 8 Quart Pres Pot. Made of sturdy cast aluminum, 20 psi pressure* while the acrylic resin is curing - forming a 

dense crosslinked repair for the dentist and patient. 

TECHNICAL 



Power source: 

Need to use warm to hot water and a compressor when working with 

this product 


8 Flasks 


CFS- 279106 Pres Pot No/Heat 1.5gal 

CFS 8 Quart Press Pot No/Heater Mfg # 279-106 CFS Press Pot Holds upto 8 Flasks. 

US$ 228.00 

FEATURES: 

Made in the U.S.A. Holds Upto 6 flasks High quality aluminum. Available With input for air line. Available in 

6 and 8 quart models. Internal electric heating or to be used on a gas stove 

CFS 6 QuartS Press Pot. Made of sturdy cast aluminum, 20 psi pressure* - while the acrylic resin is curing - 

forming a dense crosslinked repair for the dentist and patient.Also available with automatic air regulator and heater 

TECHNICAL 



Power source: 

Need to use warm to hot water and a compressor when working with this 

product 


8 Flasks 


8 

15/07/2014 / 3916



Washout only units 


Washout only units 

WASHOUT SINGLE 1 TANK (Handler) 

Washout unit only - Electric or Gas 

- Single tank - 110vol 

- Dimensions : [18in wide x 14in deph x 12in deep] - [45cm x 

35cm x 30cm ] [H# 26104 ] 

- Built in 18gauge stainless steel. 


100870 HANDLER - Washout Single 1 Tank -Gas US$ 3,495.00 +Info 

103528 HANDLER - Washout Single 1 Tank -Electri US$ 3,495.00 +Info 

15/07/2014 / 3916 

9


Catalog Index / Indice del Catálogo 

Curing Units 1 

Boil out Curing units 1 

Light Curing units 3 

Press Curing Units 1Liter 4 

Pressure Post 2 Gal 5 

Pressure Pot 1.5 Gal 6 

Pressure Pot No Heater 7 

Washout only units 9 

10 

15/07/2014 / 3916

Curing Units Curing Units - Dental Supplies

Create successful ePaper yourself

Delete template?

Save as template?