Totalizing Counters - Hengstler GmbH

Examples of the versatile use of Hengstler products.....
Applications
■ Piece/quantity counting by means of
proximity switches, light barriers, reflectance
light barriers, or switches.
For the detection of unit numbers, e.g. screws,
nails, bottles, single packs, or other production
units that have to be counted. Detection
is possible by electronic or electro mechanical
counters.
■ Shift-counting of unit numbers or totalizing
counts of 2 production lines
■ Dosing and Filling
Flow meters and a preset counter allow controlled
and accurate filling or dosing of liquid
media.
Piece-counting of production units under
shift-operation conditions, or counting of
two parallel production lines, thereby indicating
single shift values and the total unit
number.
■ Piece and/or stroke counting for punches
or presses
Helps determine the downtimes of tools or
detect unit numbers by means of mechanical
stroke counters or non-contact magnetic
counters.
■ Length measuring by means of angular
encoders, proximity switches, light barriers
or mechanical counters.
For length measuring of cables, foils, fabrics,
metals, bands, ropes, paper, etc.
The measured length is detected by a measuring
wheel or directly on the roller/drum and
indicated electronically or mechanically.
■ Cutting of cables, threads and yarns by
means of angular encoders and preset
counters.
Use the preset counter for length control.
Counters exhibiting two presets allow selecting
between fast and slow positioning in
order to achieve accurate length values.
Components
Encoders Counters Controllers indicators Relays Printers cutters
31