Page 50 SECTION II Motor Driven Metering <strong>Pumps</strong> <strong>and</strong> Parts
Page 51 SERIES G MODEL D METERING PUMPS MODEL CODE Basic Pump Select Number SD Liquid End Gear Size Code Code Motor & Liquid End Selection Liquid End Motor Connections Material Total Price = Basic Pump Selection + Motor + Liquid End + Connection Note: Drives & Liquid Ends can be purchased separately. See next page COMPLETE PUMP PS - SERIES G MODEL D BASIC PUMP SELECTION Capacity @ Max Pressure Max Pressure SPM @ Model Code 60 Hz 1725 RPM 50 Hz 1425 RPM 60 Hz 50 Hz PSI Bar GPH Liter/hr GPH Liter/hr 1725 1425 SD 2 1 0.18 0.7 0.15 0.6 43 36 SD 2 2 0.35 1.3 0.29 1.1 86 72 175 12 SD 2 6 0.48 1.8 0.4 1.5 120 102 SD 2 3 0.7 2.6 0.58 2.2 173 144 SD 4 1 3 11.4 2.5 9.5 43 36 SD 4 2 6.6 25 5.5 21 86 72 150 10 SD 4 6 10 38 6.9 26 120 102 SD 4 3 14.4 55 12 45 173 144 SD 7 1 13 49 10 38 43 36 SD 7 2 25 95 21 79 86 72 100 7 SD 7 6 34 129 28 106 120 102 SD 7 3 50 189 42 159 173 144 SD 8 1 31 117 26 98 43 36 SD 8 2 57 216 47 178 86 72 75 5 SD 8 6 87 329 72 273 120 102 SD 8 3 127 481 106 401 173 144 MOTOR SELECTION MOTORS DC Variable Speed Drive MOUNT less Motor LIQUID END MATERIAL Liquid End PVDF PVC 316SS Polymer Appl. Slurry Appl. H2SO4 Appl. Head PVDF PVC 316 SS PVC PVC PVC Valves PVDF PVDF 316 SS PVC 316 SS PVDF Code Description List Price 8 9 J L P X .25 hp, 1725 rpm, 1 Phase, 60 Hertz, 115/230 Volt, TEFC, NEMA 56C .25 hp (..2 kW), 1425 rpm, 1 Phase, 50 Hertz, 115/230 Volt, TE, NEMA 56C .25 hp, 1725 rpm, 3 Phase, 60 Hertz, 230/460 Volt, TEFC, NEMA 56C .25 hp (.2 kW), 1450 rpm, 3 Phase, 50 Hertz, 220/380 Volt, TEFC, NEMA 56C .5 hp 1725 rpm TE motor w/DC Drive, 4-20 ma input, NEMA 4/12 115 VAC Flange Mount, NEMA 56C Note - All Diaphragms are PTFE Materials Seals Size 2/4: Aflas Size 7/8: PTFE Size 2/4: Aflas Size 7/8: Viton Size 2/4 PTFE Size 7/8 Viton Viton Viton Aflas Seats Size 2: C22 Size 4: PTFE Size 7/8 Same as head Size 2/7/8: 316ss Size 4: PTFE Balls Ceramic Ceramic 316 SS 316 SS 316 SS 316 SS 316 SS Alloy 20 Alloy 20 Pump Drive Price less Liquid End & Motor $1,316 $202 $202 $202 $202 $1,611 No Charge DRIVES SD2_ & SD4_ DRIVES SD7__ DRIVES SD8__ Code Price Code Price Code Price 2 $830 2 $1,971 2 $2,225 8 $468 8 $1,023 8 $1,061 7 $1,012 7 $2,527 7 $2,834 P $1,153 P $1,376 P $1,437 L $1,294 L $1,681 L $1,819 N $1,214 N $1,487 N $1,619 CONNECTIONS Code P T P *** T *** Description NPT (St<strong>and</strong>ard) Tubing (Barb Fitting) NPT de-gassing (need to order valve) Tubing de-gassing (need to order valve) Liquid End Code <strong>and</strong> Conn. Size Liquid End Code <strong>and</strong> Conn. Size Price Price SD2_ SD4_ SD7 & 8_ SD2_ SD4_ SD7 & 8_ 1/4" NPTM 1/4" NPTM 1/2" NPTF No Charge 1/4" NPTM 1/2" NPTM 1/2" NPTF No Charge 1/4" NPTM 1/4" All Plastic Liquid Ends 1/4" 1/2" 1/2" No Charge 1/4" NPTM 1/2" 1/2" NPTF 1/2" see note below ***PLEASE NOTE DE-GASSING VALVE FOR SD2 AND SD4 IS P/N 38794 - SEE PARTS PAGE FOR PRICE ***PLEASE NOTE DE-GASSING VALVE FOR SD7 AND SD8 IS P/N 61411 - SEE PARTS PAGE FOR PRICE ***PLEASE ORDER DE-GASSING VALVES AS A SEPARATE LINE ITEM 316SS Not Available Notes: 1) All capacities are based on maximum pressures. For operation at reduced pressures, add 1% flow for every 25 psi (1.7 bar) decrease in pressure. 2) Motor requirements: 1/4 Horsepower or 0.25 kW WARNING: A pressure relief valve MUST be installed in the discharge line of all motor driven pumps. All information <strong>and</strong> prices herein subject to change without notice. www.lmipumps.com