435 specs 103008.pmd - Location Blais

435 ZHS COMPACT EXCAVATOR SPECIFICATIONS
WORKING RANGE
D
F
E
C
H
G
B
A
I
J
STANDARD & LONG ARM SPECIFICATIONS Standard Arm Long Arm
A. Maximum Blade Height ...................................... 15.7" (398 mm) 16.0" (405 mm)
B. Maximum Blade Depth ....................................... 21.5" (546 mm) 21.0" (534 mm)
C. Maximum Height of Working Equipment
with Arm Retracted ............................................. 156.3" (3970 mm) 156.3" (3970 mm)
D. Maximum Working Equipment Radius
with Boom @ Maximum Height .......................... 95.6" (2365 mm) 100.5" (2553 mm)
E. Maximum Reach at Ground Level ...................... 220.9" (5611 mm) 234.7" (5961 mm)
F. Maximum Radius of Working Equipment ........... 226.7" (5219 mm) 240.0" (6096 mm)
G. Maximum Bucket Tooth Height ........................... 210.5" (5346 mm) 220.0" (5588 mm)
H. Maximum Dump Height ....................................... 144.0" (3658 mm) 153.1" (3889 mm)
I. Maximum Depth of Vertical Wall
which can be Excavated ..................................... 101.1" (2568 mm) 113.5" (2883 mm)
J. Maximum Dig Depth ........................................... 134.7" (3420 mm) 148.5" (3772 mm)
Bucket Pivot Angle .................................................. 183° 183°

Bobcat 435 ZHS Compact Excavator Specifications November 11, 2008
DIMENSIONS
D
C
A
B
A
F
G
E
B
H
A. Upperstructure to Groundline ...................................... 24.7" (627 mm)
B. Groundline to top of engine cover ............................. 64.7" (1644 mm)
C. Minimum radius in travel position ........................... 157.6" (4003 mm)
Minimum radius in travel position-Long Arm ............ 158.4" (4023 mm)
D. Overall length in transport position.......................... 206.2" (5238 mm)
Overall length in transport position-Long Arm .......... 207.0" (5258 mm)
E. Blade height ............................................................... 17.4" (442 mm)
F. Length of track on ground ......................................... 76.1" (1932 mm)
G. Machine centerline to blade...................................... 72.5" (1843 mm)
H. Overall length of track assembly............................... 98.3" (2496 mm)
C
A. Cab Height ............................................................. 100.1" (2541 mm)
B. Track width ............................................................... 15.7" (400 mm)
C. Blade width ............................................................. 76.0" (1930 mm)
Track Lug Height .................................................................... 1.2" (30 mm)
Ground Clearance ................................................................ 9.7” (248 mm)
D
A
E
B
A. Machine centerline to working equipment centerline, left hand rotation ............ 23.0" (585 mm)
B. Machine centerline to working equipment centerline, right hand rotation .......... 31.4" (798 mm)
C. Minimum turning radius .................................................................................. 73.9" (1877 mm)
C. Minimum turning radius - Long Arm ................................................................ 75.5" (1918 mm)
D. Swing clearance, rear of upperstructure (zero tail swing) ................................. 37.6" (955 mm)
E. Working width maximum right hand rotation ................................................... 81.9" (2080 mm)
C

Bobcat 435 ZHS Compact Excavator Specifications November 11, 2008
MACHINE PERFORMANCE
Operating Weight (includes standard equipment and 24" bucket) (SAE J732)
Standard Arm
Long Arm
With rubber tracks ..................................... 10,388 lbs. (4711 kg) 10,635 lbs. (4823 kg)
With Cab, Heat & Air Conditioning ............. 10,743 lbs. (4873 kg) 10,990 lbs. (4984 kg)
Travel Speed
Low ............................................................. 1.7 mph (2,7 km/hr)
High............................................................. 2.7 mph (4,3 km/hr)
Digging Force
Bucket......................................................... 7892 lbs. (35105 N)
Breakout Force-Standard Arm .................... 5262 lbs. (23406 N)
Breakout Force-Long Arm ........................... 4525 lbs. (20128 N)
HYDRAULIC SYSTEM
Pump Type .......................................................... Piston with pressure competaing, load sensing and
torque limiter controls
Pump Capacity ................................................... 29.72 GPM (112,5 L/min)
Control Valve ....................................................... 7 Spool, closed center
System Relief Pressure ...................................... 3625 PSI (250 Bar)
Auxiliary Relief .................................................... 3045 PSI (210 Bar)
Maximum Auxiliary Flow ..................................... 19.81 GPM (75 L/min)
Drive Motors ....................................................... (2) Axial Piston Motors
Swing Motor ....................................................... Radial piston motor with brake
Oil Cooler ............................................................ Standard Equipment
Slew Speed ......................................................... 9.3 RPM
Boom Swing (Left) ............................................... 90°
Boom Swing (Right) ............................................ 50°
Hydraulic Function Times
Bucket ............................................................... Curl 2.2 Seconds Dump 1.6 Seconds
Arm (cushion out) .............................................. Retract 3.8 Seconds Extend 2.6 Seconds
Boom (cushion up) ............................................ Raise 3.8 Seconds Lower 5.0 Seconds
Boom Swing (cushion Left/Right)....................... Left 6.6 Seconds Right 5.9 Seconds
Blade ................................................................. Raise 2.4 Seconds Lower 2.4 Seconds
HYDRAULIC CYLINDERS
Bore Diameter Rod Diameter Stroke Diameter
Boom (cushion up) 3.75 in. (95,25 mm) 2.00 in. (50,8 mm) 26.72 in. (678,6 mm)
Arm (cushion out) .................................. 3.25 in. (82,6 mm) 2.00 in. (50,8 mm) 26.00 in. (660,4 mm)
Bucket ................................................... 3.00 in. (76,2 mm) 1.75 in. (44,5 mm) 20.63 in. (524 mm)
Boom Swing (cushion left and right) ...... 3.25 in. (82,5 mm) 2.00 in. (50,8 mm) 23.51 in. (597,2 mm)
Blade (2) ................................................ 3.25 in. (82,5 mm) 1.75 in. (44,5 mm) 6.10 in. (154,9 mm)

Bobcat 435 ZHS Compact Excavator Specifications November 11, 2008
ENGINE/ELECTRICAL
Make/Model ................................... Kubota V2403 (Turbo) (interim Tier 4)
Fuel/Cooling .................................. Diesel/Liquid
Horsepower (SAE Gross) ............... 48.8 HP (36,4 kW)
Horsepower (SAE Net) ................... 47.5 HP (35,4 kW)
Maximum Governed RPM .............. 2200 RPM
Torque (SAE Gross) ...................... 125.1 ft–lbs. (169,6 Nm)
Number of Cylinders ...................... 4
Displacement................................. 122 cu. in. (1999 cu. cm)
Bore/Stroke.................................... 3.27 x 3.64 in. (83 x 92,4 mm)
Lubrication ..................................... Forced
Fuel Filter ...................................... Two-Stage
Air Cleaner .................................... Dry replaceable cartridge with safety element and
restriction indicator
Alternator ....................................... 12 volt; 90 amps, open frame with internal regulator
Battery ........................................... 12 volt; 600 cold cranking amps @ 0°F (-18°C);
115 minute reserve capacity
Starter ............................................ 12 volt; Gear Reduction Type; 2.7 HP (2 kW)
UNDERCARRIAGE
Undercarriage...........................Crawler-Type Tractor Design
Sealed Track Rollers with Reinforced
Box-Section Track Roller Frame
Track Adjusters ........................Grease Type with Shock
Absorbing Recoil Springs
Track Type (Rubber) ................1/2 Pitch Rubber
Track Type (Steel opt.).............Double Grouser Shoe
Track Width ..............................15.7" (400 mm)
Track Rollers ............................5 each side
Top Roller .................................1 each side
Standard Arm:
Ground Pressure-Rubber ..........4.00 PSI (27,6 kPa)
Ground Pressure-Steel .............4.03 PSI (27,8 kPa)
Long Arm:
Ground Pressure-Rubber ..........4.10 PSI (28,3 kPa)
Ground Pressure-Steel .............4.13 PSI (28,5 kPa)
CAPACITIES
DRIVE SYSTEM
Fuel Tank ............................... 17.8 gal. (67,4 L)
Cooling System .......................... 4.5 gal. (17 L)
Engine oil & filter ........................ 7.5 qts. (7,1 L)
Hydraulic System Reservoir ......9.7 gal. (29,9 L)
Drive Pumps ..............................Dedicated variable displacements piston pumps for left and right drive
Drive Motors ..............................Each track is driven by a hydrostatic axial piston motor
Type of Reduction......................Two stage planetary gear reduction
Max. Drawbar Pull ......................10463 lbf. (46540 N)
Maximum Gradeability ...............30°

Bobcat 435 ZHS Compact Excavator Specifications November 11, 2008
OPTIONS/
ACCESSORIES
AM/FM Stereo
Keyless Start
Long Arm
Steel Tracks
TOPS/ROPS Cab
with Heater and Air Conditioning
Travel Motion Alarm
ATTACHMENTS
Auger
Grading Blade (55")
Grading Bucket (39" & 52")
Grapple
Hydra-Tilt
Hydraulic Breaker
Hydraulic Clamp
Packer Wheel
Plate Compactor
Power Tilt
Ripper
Trenching Buckets
Trencher
STANDARD FEATURES
76" Dozer Blade
15.7" Half Pitch Rubber Track
Auxiliary Hydraulics with Quick Couplers
Blade Float
Control Console Locks
Control Pattern Selector Valve (ISO/STD)
Cupholder
Engine/Hydraulic Monitor with Shutdown
FastTrack® Drive System
Fingertip Auxiliary Hydraulic Control
Horn
Hydraulic Joystick Controls
Retractable Seat Belt
Spark Arrestor Muffler
Suspension Seat with High Back
*TOPS/ROPS Canopy
Two-Speed Travel
Vandalism Protection
Working Lights
X-Change(TM) (Attachment Mounting System)
Warranty: 12 Months, Unlimited Hours
*Roll Over Protective Structure (ROPS) -
Meets Requirements of SAE-J1040C
*Tip Over Protective Structure (TOPS) -
Meets Requirements of ISO/DIS 12117
CONTROLS
Vehicle Steering ............. Independent control of tracks, via pilot-assisted hand levers or foot pedals
High/Low Range ............ Activated by thumb switch on blade lever
Excavator Functions ...... Two hydraulic joysticks control boom, arm, bucket and cab slew. Foot pedal controls
boom swing. Switches on right hand joystick control Auxiliary Hydraulic Functions
Blade Functions ............. The blade is controlled by a separate lever. Blade float is activated by blade lever.
Service Brake (Travel) ... Spring applied multi-disc brake
Parking Brake (Travel) ... Spring applied multi-disc brake
Service Brake (Slew) ..... Hydraulic lock on motor
Holding Brake (Slew) ..... Spring applied multi-disc brake
INSTRUMENTATION
WARRANTY
One Year Unlimited Hours ............. Standard
24 Month, 2000 Hour Limit ............ Optional
36 Month, 3000 Hour Limit ............ Optional
60 Month, 5000 Hour Limit
(Municipalities Only) ................ Optional
Right of Operator Seat
Air Filter Restriction Indicator
Charging System Indicator
Engine Oil Pressure Indicator
Engine Temperature Gauge
Fuel Gauge
Hourmeter
Hourmeter - Resettable
Hydraulic System Indicator
Pre-Heat Indicator
Tachometer

Bobcat 435 ZHS Compact Excavator Specifications November 11, 2008
LIFT CHARTS

Bobcat 435 ZHS Compact Excavator Specifications November 11, 2008
SERVICEABILITY
Access is available to the following through the rear tailgate or
side access hood:
Air cleaner
Alternator
Compressor (if excavator is equipped with Air Conditioning)
Cooling system (engine coolant and hydraulic oil coolers) for cleaning
Engine oil and fuel filters
Engine oil level
Hydraulic Filter
Hydraulic valve bank
Starter
Sight gauge for hydraulic level
Tailgate and access cover have locks for vandal proofing
Easy access to all grease points
Central grease point for slew bearing, slew pinion and swing cylinder base
SAFETY
Seat Belt (Std.) .......................................... Should always be worn when operating the excavator
Grab Handles (Std.) ................................... Should always be used when entering/exiting excavator.
Front Working Lights (Std.) ........................ Use for indoor and low light operation.
Control Lockout (Std.) ............................... Operator console shall lock out work group and travel functions when in
the upright position.
House Swing Lock (Std.) .......................... An automatic disc brake shall be provided to lock upper structure to the
undercarriage for transporting.
Operator’s Handbook ................................ Weather resistant operator handbook written in English will be
attached to inside of cab, providing operational instructions and
warnings by decals with pictorials and international symbols plus
some messages in four basic languages: English, French, German
and Spanish.
TRAINING RESOURCES
Bobcat Excavator Operator Training Course
4-hour course provides video, classroom and hands-on training
Bobcat Excavator Service Safety Training Course
2-hour course provides video, classroom and hands-on training