435 specs 103008.pmd - Location Blais

Bobcat 435 ZHS Compact Excavator Specifications November 11, 2008
ENGINE/ELECTRICAL
Make/Model ................................... Kubota V2403 (Turbo) (interim Tier 4)
Fuel/Cooling .................................. Diesel/Liquid
Horsepower (SAE Gross) ............... 48.8 HP (36,4 kW)
Horsepower (SAE Net) ................... 47.5 HP (35,4 kW)
Maximum Governed RPM .............. 2200 RPM
Torque (SAE Gross) ...................... 125.1 ft–lbs. (169,6 Nm)
Number of Cylinders ...................... 4
Displacement................................. 122 cu. in. (1999 cu. cm)
Bore/Stroke.................................... 3.27 x 3.64 in. (83 x 92,4 mm)
Lubrication ..................................... Forced
Fuel Filter ...................................... Two-Stage
Air Cleaner .................................... Dry replaceable cartridge with safety element and
restriction indicator
Alternator ....................................... 12 volt; 90 amps, open frame with internal regulator
Battery ........................................... 12 volt; 600 cold cranking amps @ 0°F (-18°C);
115 minute reserve capacity
Starter ............................................ 12 volt; Gear Reduction Type; 2.7 HP (2 kW)
UNDERCARRIAGE
Undercarriage...........................Crawler-Type Tractor Design
Sealed Track Rollers with Reinforced
Box-Section Track Roller Frame
Track Adjusters ........................Grease Type with Shock
Absorbing Recoil Springs
Track Type (Rubber) ................1/2 Pitch Rubber
Track Type (Steel opt.).............Double Grouser Shoe
Track Width ..............................15.7" (400 mm)
Track Rollers ............................5 each side
Top Roller .................................1 each side
Standard Arm:
Ground Pressure-Rubber ..........4.00 PSI (27,6 kPa)
Ground Pressure-Steel .............4.03 PSI (27,8 kPa)
Long Arm:
Ground Pressure-Rubber ..........4.10 PSI (28,3 kPa)
Ground Pressure-Steel .............4.13 PSI (28,5 kPa)
CAPACITIES
DRIVE SYSTEM
Fuel Tank ............................... 17.8 gal. (67,4 L)
Cooling System .......................... 4.5 gal. (17 L)
Engine oil & filter ........................ 7.5 qts. (7,1 L)
Hydraulic System Reservoir ......9.7 gal. (29,9 L)
Drive Pumps ..............................Dedicated variable displacements piston pumps for left and right drive
Drive Motors ..............................Each track is driven by a hydrostatic axial piston motor
Type of Reduction......................Two stage planetary gear reduction
Max. Drawbar Pull ......................10463 lbf. (46540 N)
Maximum Gradeability ...............30°