vaal main brochure - Tiles2Taps

PRESIDENT
PRESIDENT UNDERSLUNG VANITY BASIN
PRODUCT CODE 7039
DESCRIPTION
Vaal Sanitaryware vitreous china 580 x 410mm
“President” oval underslung vanity basin, with integrated
overflow. The basin has an unglazed contact surface area and
is designed for fixing under vanity slab or in a bathroom
cabinet using three or four hanger brackets (code 8125Z0).
No provision for tapholes.
SPECIFICATIONS
Mass
Volume
Basin 10.00 kg 0.053 m³
INSTALLATION
Position basin under oval cut-out of vanity slab or under
bathroom cabinet top, ensuring that overhang is evenly spaced.
With basin correctly positioned, mark hole positions of the
support brackets. Remove basin and drill previously marked
bracket screw holes.
170
205
210
NOTE: Care must be taken to ensure that holes do not
penetrate through slab.
530
The support brackets may now be screwed into place. Apply a
liberal layer of silicone sealant or equivalent to unglazed contact
area of basin and place in final position. Slide the support
bracket into place, thereby suspending the basin. Tighten
locking bolts so as to ensure a watertight seal between basin
and underside of vanity top. Clean off any surplus sealant.
NOTE: Do not use epoxy.
350
410
SPECIAL RECOMMENDATION
Ensure basin is adequately sealed so as to prevent seepage into
below vanity slab.
580
R340
R120
340
520
Template diagram
a10