vaal main brochure - Tiles2Taps

WEAVER
WEAVER BASIN
PRODUCT CODE 704201/702500
DESCRIPTION
Vaal Sanitaryware vitreous china 570 x 455mm
“Weaver” rectangular surface mounted vanity basin with
either one taphole (code 704201) or
no taphole (code 702500).
SPECIFICATIONS
Mass
Volume
Basin 10.60 kg 0.040 m³
INSTALLATION
The basin may be installed by alternative methods:
1. Mounted onto a vanity surface.
2. Using a Weaver/Sola semi-concealed bracket. (code 8131Z2)
570
Option 1:Place basin on vanity surface over pre-cut outlet hole.
Fit waste and fasten nut under the vanity surface.
Option 2:Place basin level against finished wall surface at
correct height. Position semi-concealed bracket and mark for
fixing holes. Remove basin and fix bracket to wall using rawl
bolts or similar. Apply a rapid hardening compound to the flat
contact area of the bracket. Using silicone sealant or equivalent
between back of basin and finished wall surface, place basin on
bracket ensuring basin is level. Fit basin waste, and secure
bracket to basin waste.
275
455
SPECIAL RECOMMENDATION
Always use silicone sealant or equivalent around basin edges for
a secure and neat installation. Wipe off excess sealant and
allow to dry.
475
55
115
150
200
Concealed wall bracket 8131Z2
a1