breathing life into your environment Product Brochure - Ferrob

eathing life into your
environment
Gas Compliant Fan
The WW 150 AXSG kitchen fan
comprises quiet, efficient, axial flow fans
for wall, ceiling or window mounting.
Designed for easy installation, attractively
styled in high gloss ABS thermoplastics
for modern appearance and ease of
cleaning and incorporating the latest
technology and design. The units have
silently operating electric shutters
controlled by a well proven thermoelectric
activator. These shutters are
designed to eliminate back-draught
The WW 150 AXSG is ideally suited where gas spillage may occur.
IMPORTANT
When this unit is installed in the same room as an open flued appliance, IT
MUST ONLY be set on a maximum extract rate of 20 ltrs/sec
Adjustable extract rate
20- 65 litres per second
Fans can be wall or
window mounted
British made
Designed to exceed the
2006 Building Regulations
on Ventilation (F1)
Tested to comply with
HD280/BS3456 Part
102:342 1988
5 year no quibble
guarantee
Technical Data
Construction
Electrical
Motor
Guarantee
Installation
Performance
Additional Data
These fans are moulded in impact resistant high gloss ABS thermoplastics for strength,
durability and finish.
220-230v ~ A.C. 50Hz Single phase consuming 20 watts. These fans are double
insulated and do not require an earth. All wiring must comply with current IEE
regulations. A double pole isolating switch, having a contact separation of at least
3mm in all poles, must be used with a 3 amp fuse fitted. The fan should be mounted
a minimum of 1.75 metres from the floor and less than 400mm from the ceiling.
Do not install the fan above a heat source. e.g. radiator, cooker.
Single phase induction motor with pre-oiled bearings fitted for a long maintenance free
life and protected by a thermal fuse.
Two year no quibble guarantee.
Designed to be wall or window mounted. Kits available on request.
Wall kits comprise a wall sleeve (275mm long) and a gravity grille (white, terracotta,
stone, grey or brown)
Window kits comprise an external white gravity grille and internal fixing plate.
Installation through a wall requires a 162mm hole, through a window a 185mm hole.
WW 150 AXSG - extract rate of 20 – 65 litres per second.
Maximum pressure: 50 p.a. Fan speed: 2400 r.p.m.
Sound volume: 38.0 dB(A) Maximum operating temperature 40ºC.
Protection Rating: - IPx4
Page 11
Ferrob Limited, Regency House, Kingsclere Park, Kingsclere, Newbury, Berks. RG20 4SW; Tel: 01635 299266 Fax: 01635 299277
Email: sales@ferrob.co.uk
Website: www.ferrob.co.uk