breathing life into your environment Product Brochure - Ferrob
breathing life into your environment Product Brochure - Ferrob
breathing life into your environment Product Brochure - Ferrob
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
eathing <strong>life</strong> <strong>into</strong> <strong>your</strong><br />
<strong>environment</strong><br />
UAX150 Range: 230v<br />
The UAX150 range of 150mm<br />
(6") kitchen fans comprises<br />
quiet, efficient, axial flow fans<br />
for wall, ceiling or window<br />
mounting.<br />
Designed for easy installation,<br />
attractively styled in high gloss<br />
ABS thermoplastics for modern<br />
appearance and ease of<br />
cleaning and incorporating the<br />
latest technology and design.<br />
The UAX150 series is ideally suited for domestic kitchen applications.<br />
Extract rate 235m³hr, 64 litres<br />
per second<br />
Fans can be wall, ceiling or<br />
window mounted<br />
British made<br />
Designed to exceed the 2006<br />
Building Regulations on<br />
Ventilation (F1)<br />
Tested to comply with<br />
HD280/BS3456 Part 102:342<br />
1988<br />
2 year no quibble guarantee<br />
Technical Data<br />
230v models<br />
Catalogue No.<br />
UAX 150<br />
UAX 150 S<br />
UAX 150 TRS<br />
UAX 150 HTS<br />
UAX 150 TRSH<br />
Type<br />
Standard model - for remote switching.<br />
As above supplied with integral pull switch.<br />
Continuously running trickle speed with pull switch boost<br />
Humidity control - The fan will run when humidity rises over the pre-set level of 65% RH.<br />
Complete with integral timer (15 mins) and pull switch.<br />
Continuously running trickle speed with pull switch boost & hour run meter to monitor<br />
length of time fan is switched on.<br />
Construction<br />
Electrical<br />
Motor<br />
Guarantee<br />
These fans are moulded in impact resistant high gloss ABS thermoplastics for strength,<br />
durability and finish.<br />
220-230v ~ A.C. 50Hz Single phase consuming 20 watts. These fans are double<br />
insulated and do not require an earth. All wiring must comply with current IEE<br />
regulations. A double pole isolating switch, having a contact separation of at least<br />
3mm in all poles, must be used with a 3 amp fuse fitted. The fan should be mounted<br />
a minimum of 1.75 metres from the floor and less than 400mm from the ceiling.<br />
Do not install the fan above a heat source. e.g. cooker, radiator<br />
Single phase induction motor with pre-oiled bearings fitted for a long maintenance free<br />
<strong>life</strong> and protected by a thermal fuse.<br />
Two year no quibble guarantee<br />
Page 5<br />
<strong>Ferrob</strong> Limited, Regency House, Kingsclere Park, Kingsclere, Newbury, Berks. RG20 4SW; Tel: 01635 299266 Fax: 01635 299277<br />
Email: sales@ferrob.co.uk<br />
Website: www.ferrob.co.uk