Stainless Steel Submersible Pumps AFP 1031 and 1032 SX DN100

Stainless Steel Submersible Pumps
AFP 1031 and 1032 SX
Robust reliable high grade stainless steel pumps from 1 ,5 to 6 kW for pumping of
waste water and sewage containing corrosive materials in chemical,
processing and sea water applications.
■ For chemically
contaminated
sewage and waste
water
■ Vortex impeller for
superior solids
handling
■ Automatic seal and
temperature
monitoring at all
times
■ High grade AISI 316
stainless steel
■ Viton seals
■ Cable can be fitted
with protective
sleeving
DN100
4.4011 GB 10.98

AFP Stainless Steel 1031 and 1032 SX
Robust reliable high grade stainless steel pumps from 1,5 to 6 kW
for pumping of waste water and sewage containing corrosive
materials in chemical, processing and sea water applications.
Maximum ambient temperature + 40°C, information on applications
at other temperatures available on request.
Materials
MotorhousingStainless steel-1.4408 (AISI 316)
Rotor shaft Stainless steel-1.4401 (AISI 316)
Volute Stainless steel-1.4408 (AISI 316)
Impeller Vortex Duplex Stainless steel-1.4460 (AISI 329)
Fasteners in contact with medium Stainless steel-1.4408 (AISI 316)
Description: The water pressure-tight encapsulated fully flood-proof
motor and pump section form a compact and robust unit.
Motor: Three-phase squirrel-cage motor 400 V3-50 Hz, 4-pole (1480
min-1), Protection Type IP68, stator insulation class F, for 155°C,
direct starting up to ≤ 3 kW > 3 kW is Y∆- or direct starting possible.
Technical Data
Pump Type Motor Power* Speed Rated Rated current Cable type** Weight
at 50 Hz voltage at 400 V Starting
Impeller P1 P2
Hydraulics version Motor kW kW min-1 V 3~ A Stand kg
AFP 1031 (1) M 30/4-12 3,98 3,0 1480 400 7,21 (1) dir. 80
1031 (2) M 22/4-11 3,04 2,2 1480 400 5,54 (1) dir. 78
1031 (3) M 15/4-11 2,65 1,95 1480 400 5,01 (1) dir. 78
AFP 1032 (1) M 60/4-22 7,19 6,0 1480 400 12,5 (2) Y∆ 110
1032 (2) M 40/4-21 5,0 4,0 1480 400 8,87 (2) Y∆ 107
*P1 =Power taken from the mains; P2= Power at the motor shaft **Cable Type (1) H07RN-F7G1,5
Pumps are supplied as standard with 10m cable and free ends (2) H07RN-F10G1,5
H [m]
Q
P2
[kW]
10
8
6
4
2
[l/s]
0
0
[m 3/h]
0
3
2
1
Part No. 16005113
AFP 1031...
20
A company in the Cardo Group
5
1
2
3
M30/4-12
M22/4-11
M15/4-11
10
15
20
DN 100
4-pole (1480 min-1)
solid size 100 mm
Vortex system
40 60 80 100 120
25
Vortex impeller
30
35
Rotor shaft is supported in lubricated for life maintenance-free
ballbearings.
Shaft sealing between motor and hydraulic section by means of high
quality sealing unit using a silicon carbide mechanical seal,
independent of direction of rotation and resistant to temperature
shock.
Seal monitoring: Dl-System with a sensor in the oil chamber to give
a timely indication that an inspection is due and that leakage at the
shaft seal has occurred.
Temperature monitoring: TCS-Thermo-Control-System with
thermal sensors in the stator to give a warning and switch off the
pump in the case of over-heating of the motor.
Hydraulics: Vortex impeller for pumping of gaseous liquids which
may contain coarse particles or materials which tend to “rope”.
Discharge outlet with DIN-flange, DN 100.
H [m]
The company reserves the right to make alterations in the interests of technical development.
FOR COST-EFFECTIVE PUMPING
Q
P2
[kW]
[l/s]
[m 3/h]
18
16
14
12
10
8
6
4
2
0
0
6
4
2
AFP 1032...
0
1
2
M60/4-22
M40/4-21
DN 100
-pole (1480 min-1)
solid size 100 mm
Vortex system
Vortex impeller
10
20
30
40
50
20 40 60 80 100 120 140 160 180
IRELAND GREAT BRITAIN ASIA PACIFIC INTERNATIONAL
ABS Pumps Ltd. ABS Pumps Ltd. ABS Pumps International AB ABS Pumps International AB
Wexford Horley, Surrey Singapore Branch Ireland, Wexford
Tel. 053-63 200 Tel. 01293-8219 75 Tel. +65 338 97 76 Tel.+353 53-43 200
Fax 053-46 006 Fax 01293-8219 76 Fax +65 338 97 07 Fax+353 53-46 006
Austria Belgium Brazil Canada Denmark Finland France Germany Italy Netherlands Norway Spain Sweden USA