Precision rail guides
Precision rail guides
Precision rail guides
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
www.lmotion.ru skf@lmotion.ru Тел. (495)-921-34-60<br />
Accessories for LWRPM/LWRPV <strong>rail</strong> <strong>guides</strong><br />
Slide coating<br />
Designation 1) Dimensions load carrying Rail<br />
capacity 2)<br />
guide<br />
designation<br />
Rail guide<br />
HC<br />
mm<br />
N<br />
LWRPM 3 0,7 300/100 mm LWRPV 3<br />
LWRPM 6 1,7 700/100 mm LWRPV 6<br />
LWRPM 9 1,7 1 200/100 mm LWRPV 9<br />
1)<br />
The slide coating is an integral part of the LWRPM <strong>rail</strong> and does not have to be ordered separately.<br />
2)<br />
for a surface loading of approx. 1 N/mm 2 (momentary loads of up to 6 N/mm 2 are permissible).<br />
End pieces<br />
LWRPM/LWRPV <strong>rail</strong> <strong>guides</strong>, by virtue of their design,<br />
do not normally require end pieces.<br />
For this reason, tapped holes on the end faces are also unnecessary.<br />
However, for production reasons,<br />
LWRPV <strong>rail</strong> <strong>guides</strong> will in certain cases be supplied with end face holes.<br />
LWGD<br />
Special attachment screws<br />
See page 19 for designations and dimensions.<br />
36
Change language