Model 1250 Wheel Balancer - Atlantic Auto Suppliers

PRESETTING:
Note:
- The diameters must always and only be set in mm
- when dE is not set, dE = dI - 1".
5.1.5 - Setting with gauge extension ( optional )
A
Extension + 60 mm
B
cm 60 mm
The extension increases the gauge distance measurement field by 60 mm (Fig. A) and allows distance measurement
even when the rim has a special profile (Fig . B).
Proceed as indicated below:
- Fit the extension on the distance gauge.
- Measure the distance as already described.
- Having read value “a” on the dial, reset the gauge to 0 and set by hand the value “a + 60mm”
- Manually set the diameter and the width.
I 0495 GB - 11