Sound and Vibration - NEBB

NEBB S & V PROCEDURAL STANDARDS
TABLE OF CONTENTS
PAGE
SECTION 5 Standards for Reports and Forms 17
5.1 Reports 17
5.2 Required Forms 17
5.2.1 Report Title 18
5.2.2 Report Certification 18
5.2.3 Table of Contents 18
5.2.4 Report Summary / Remarks 18
5.2.5 All Report Pages 18
5.2.6 Instrument Calibration 19
5.2.7 Abbreviations 19
5.2.8 Vibration Measurement Report Forms 19
5.2.9 Sound Measurement Report Forms 20
PART 2 - PROCEDURES
SECTION 6 Preliminary Sound & Vibration Procedures 21
6.1 Introduction 21
6.2 Examination of Contract Documents 21
6.2.1 Specification Examination 21
6.2.2 Drawing Examination 21
6.3 Submittal Drawing Examination 22
6.4 Construction Field Inspection Verification 22
6.4.1 Inspection Checklist 22
6.4.2 Construction Readiness 23
6.4.3 Construction Readiness Report 23
6.5 Conditions Required for Vibration Measurements 23
6.6 Conditions Required for Sound Measurements 24
6.6.1 Interior 24
6.6.2 Exterior 24
6.6.3 Environmental Systems 25
SECTION 7 Vibration Measurement Procedures 27
7.1 Equipment Startup 27
7.2 Vibration Sources 27
7.3 Vibration Scope 27
7.3.1 Vibration Scope Methods 27
7.3.2 Engineering Construction Documents 27
7.3.3 Minimum NEBB Requirements 27
7.3.4 Negotiated Contract 28
7.4 Measurement Procedures 28
7.4.1 Measurement Procedures 28
7.4.2 Other Sources 28
7.4.3 Location and Attachment of Accelerometer (Transducer) 28
7.5 Data Measurements 29
7.6 Measurement Locations 30
7.6.1 Measurements on Equipment 30
7.6.2 Measurements on Equipment Bases 31
7.6.3 Measurements on Building Structure 31
VI