The BEECK Product Range

BEECK Mineral Paints in Interiors
BEECK Mineral Paints in Interiors
Intended use
Opaque white textured coating for brush or roller application in the BEECK Maxil system. Brightens
up the surface of smooth substrates made of gypsum or light-weight building board and
levels out structural defects and hairline cracks. Ensure uniform particle-size distribution in
streaked light and apply seamlessly.
Intended use
Extremely water vapour permeable, active silicate paint to VOB/C DIN 18363 2.4.1. for porous
mineral substrates, especially lime plasters. Ideal for historical, repre-sentative buildings, even
under critical building physics conditions. Timelessly authentic, mineral aesthetics. Thin with
BEECK Fixative.
Maxil Primer Coarse
Slurry primer for further treatment
with BEECK Maxil
Properties
- Grading curve with coarse grain 0.4 mm
- Fine plaster-like surface
- Easy to use
Colours
White
Container size
8 kg / 20 kg
Quartz Paint
Silicification active, water vapour
permeable, interior silicate paint for
historical interiors
Properties
- BEECK ASF ® ActiveSilicateFormulation
- Maximum colourfastness A1
(BFS-MB No. 26)
- Moisture regulating
Specification to EN 13300
- Wet-scrub resistance class 2
- Hiding power class 2
- Matt with lustred lime effect
- Mould resistant due to alkalinity
- Can be repeatedly renovated
- Free from solvents
Colours
White, Off-White and the 200 ready-mixed colours of the BEECK Mineral Colour Chart.
Tintable pastel colour and full colour coatings with BEECK Full Colour Silicate Paints.
BEECKASF ®
ActiveSilicateFormulation
Container size
5 L / 12.5 L
Technical data:
Technical data:
W 24 value: 0.15 kg / (m 2 h 1/2 )
W 24 value: > 1.00 kg / (m 2 h 1/2 )
s d value (H 2O):
0.09 m
s d value (H 2O):
< 0.02 m
Density (20°C)
1.53 kg / L
Density (20°C)
1.54 kg / L
pH value: 11
pH value: 11
Application rate:
approx. 0.24 kg / m² on a smooth substrate
Organic content: < 5 %
Application rate:
approx. 0.12 L / m² on a smooth substrate
Insil
Solvent free, open-pored interior
silicate paint for living areas and
commercial premises
Intended use
Ready-to-use interior silicate paint to VOB/C DIN 18363 2.4.1 for all firm interior substrates
such as lime plasters, concrete, fabric and wood chip wallpapers.
Properties
- Universal use
- Easy to use
- Mould resistant due to alkalinity
Specification to EN 13300
- Wet-scrub resistance class 3
- Hiding power class 2
Colours
White, Off-White
Tintable pastel colour with BEECK Full Colour Silicate Paints.
Container size
5 L / 12.5 L
- Free from solvents
- Valuable room climate properties
Protect Fine
Reversible protective coating for
historical interiors
Intended use
Highly water vapour permeable topcoat, white or tinted. For the protection of historical substrates,
especially for wall paintings and colour façades in the preservation of listed buildings. Abrasion
resistant and free from chalking. Can be renovated and painted over (not with lime wash paint!)
in the system as often as required, can be gently removed at any time from water-resistant (!)
historical substrates using water.
Properties
- Can be removed again
- One-pack
- User friendly
Specification to EN 13300
- Hiding power class 1
- Mineral matt
- Non vapour retarding
Colours
White, Off-White and the 200 ready-mixed colours of the BEECK Mineral Colour Chart.
Tintable and full colour coatings with BEECK Protect Full Colour Paint.
Container size
5 L / 12.5 L
Technical data:
Technical data:
W 24 value: 0.20 kg/(m 2 h 1/2 )
W 24 value: > 1.00 kg / (m 2 h 1/2 )
s d value (H 2O):
< 0.02 m
s d value (H 2O):
0.03 m
Density (20°C)
1.43 kg / L
Density (20°C)
1.58 kg / L
pH value: 11
pH value: 9
Organic content: < 5 %
Application rate:
approx. 0.14 L / m² on a smooth substrate
Application rate:
approx. 0.13 L / m² on a smooth substrate
18 BEECK Mineral Paints in Interiors
BEECK Mineral Paints in Interiors 19