1. Features 2. Specification - SignLightingWorld.com

1. Features
• Color coated jack
• LED Space: 0.5"
• Super Bright and Ultra Bright type can be choose.
• Work temperature: >=-20 o C~60 o C
• Package:100FT/30.48m
• Long life (up to 100,000 hours!) and trouble-free operation
• Energy efficient; most signs use only 6 watts per meter.
• Very bright LED and continuously line to attract attention
• Safe low voltage operation; cool to the touch
• High visibility, even in direct other light
• Flexible, easy to band; Easy to install, and maintain.
• Fully enclosed electronics: no exposed glass tubing as with
neon
• UL certified ( UL# E 327389)
• One year warranty
2. Specification
A. 120 AC Input
Model Size(mm)
Input
Voltage
LED Space
Specification & Installation Guide
For JE-00XY-FN Flex-LED
CAUTION: DO NOT PLUG INTO POWER MORE THEN ONE
No. of LED
per unit
MINTUNE WHEN PRODUCT ROLLED
Length
per unit
Power
per unit
Total output
(Lm/Unit)
LED Color
JE-001R-FN 14X27.5 120V 0.5" 60 2.5FT 3W 11 Red
JE-006Y-FN 14X27.5 120V 0.5" 60 2.5FT 2.4W 21.5 Yellow
JE-007A-FN 14X27.5 120V 0.5" 60 2.5FT 2.4W 17 Orange
JE-002G-FN 14X27.5 120V 0.5" 36 1.5FT 1.8W 13.5 Green
JE-003B-FN 14X27.5 120V 0.5" 36 1.5FT 1.8W 6 Blue
JE-004W-FN 14X27.5 120V 0.5" 36 1.5FT 1.8W 10.5 White

B. 24 V DC Input
Model Size(mm)
Input
Voltage
LED Space
Specification & Installation Guide
For JE-00XY-FN Flex-LED
No. of LED
per unit
Length
per unit
Power
per unit
Total output
(Lm/Unit)
LED Color
JE-001R-FN 14X27.5 24V 0.5" 8 1/3FT 0.6W 1.5 Red
JE-006Y-FN 14X27.5 24V 0.5" 8 1/3FT 0.5W 2.9 Yellow
JE-007A-FN 14X27.5 24V 0.5" 8 1/3FT 0.5W 2.3 Orange
JE-002G-FN 14X27.5 24V 0.5" 6 1/4FT 0.4W 2.3 Green
JE-003B-FN 14X27.5 24V 0.5" 6 1/4FT 0.4W 1 Blue
JE-004W-FN 14X27.5 24V 0.5" 6 1/4FT 0.4W 1.8 White
3. Accessories
FN101— 110 AC input Power Converter, drive FN102— connection pin from Power Converter
800 feet/pc to flex tube
FN103— connection pin from tube to tube FN104— Up L connector from tube to tube

Specification & Installation Guide
For JE-00XY-FN Flex-LED
FN105— outside L connector from tube to tube FN106— inside L connector from tube to tube
FN107— Up T connector from tube to tube FN108— End cap
FN109/FN110— 2 FT/6FT Extension Connector FN111— shrink tube for connected protection

Specification & Installation Guide
For JE-00XY-FN Flex-LED
FN112— 2 inch C aluminum mount FN113— 12 inch C aluminum mount
4. Installation
LED Neon Flex is versatile and user-friendly. It can be cut to whatever size, bend to
whatever angle and easy to install on the surface of various materials such as wood,
plastic, steel or wall, forming different patterns according to your design. Moreover, it
can be simply connect to the power and has well working performance. Mark centerline
on your desired position. Secure mounting clips along the centerline at appropriate
Insert the light body into the mounting clips with the lighting Connect each part together.
Face upward. Intervals with screws. It is better to secure mounting clips on and
between each curve.
Figure 1: Connect Power converter to tube Figure 2: Connect tube to tube

Specification & Installation Guide
For JE-00XY-FN Flex-LED
Figure 3: Connect tube to tube on stand up way Figure 4: Connect tube to tube via extension
Via L connector connector
Figure 5: Connect tube to tube on outside way Figure 6: Connect tube to tube on inside way
Via L connector Via L connector
Figure 7: Connect tube to tube via T connector Figure 8: Put the end cap on the end

Specification & Installation Guide
For JE-00XY-FN Flex-LED
Figure 9: Shrink the tube by heater for each Figure 10: push the tube into aluminum mount
Connected portion
6. SAFETY INSTRUCTION:
Read the installing instruction carefully and comply with it. The light shall be cut only on the
CUTTING POINT. Before connecting to the connectors, bend the LED Neon-Flex
rightwards and leftwards. Extra copper wires need to be cut. Ensure the light and the power
supply has the same voltage. Pay more attention to the polarity when connecting two
pieces. Do not use if there is any damage on the light or its isolator. Inspect periodically.
Do not submerge the light in liquids, or use it near any water source. Do not secure the light
or its cord with staples, nails or other sharp-pointed things that may damage the isolator.
Do not bend the light continuously and the bending semi diameter shall not larger than 4cm
Do not light the light when it is in plastic reel. It is recommended to fix the length of tubes
&choose mudded connectors when outdoor use. However, the power supply connectors
shall be hidden indoor try to avoid middle connection when choosing easy connectors.
(Waterproof glue shall be used in middle connection.) When using the LED Neon Flex
outdoor, basic safety precautions should always be followed to reduce the risk of fire,
electric shock and personal injury. Ground fault circuit interrupter (with case shell)
protection should be provided on the circuit for LED Neon Flex.