SIEMON SYSTEM CATALOG

More documents

Recommendations

Info

FIBER SC AND ST EPOXY POLISH CONNECTORS SC EPOXY POLISH CONNECTORS SC duplex connectors have a duplexing clip, which allows each connector to be removed individually. In the event fiber polarity is reversed during termination, there’s no need to discard the connector. Simply remove connectors from the clip and switch to correct the mistake, saving valuable installation time and money. The duplexing clip also speeds troubleshooting. In the event there’s a fault with a single connection, an individual connector can be removed from the clip and re-terminated without disturbing the adjacent connector. SC connectors employ an outer housing that is color-coded in accordance with TIA/EIA-568-B.3 and ISO/IEC 11801 Ed. 2.0 requirements (beige for multimode and blue for singlemode). MULTIMODE (XGLO ® and LightSystem ® ) Part # Description FC1-SC-MM-J80. . . . . . . . . . . . SC simplex connector, jacketed fiber, beige boot FC1-SC-MM-B80. . . . . . . . . . . . SC simplex connector, buffered fiber, beige boot FC2-SC-MM-B80. . . . . . . . . . . . SC duplex connector, buffered fiber, two beige boots FC2-SC-MM-J. . . . . . . . . . . . . . SC duplex connector, jacketed fiber, one black boot and one beige boot Simplex Add “-B” to the end of part number for bulk pack (Simplex: 100/box, Duplex: 50/box). SINGLEMODE (XGLO) Part # Description FC1-SC-SM-B06 . . . . . . . . . . . . SC simplex connector, buffered fiber, blue boot FC1-SC-SM-J06 . . . . . . . . . . . . SC simplex connector, jacketed fiber, blue boot FC2-SC-SM-B06 . . . . . . . . . . . . SC duplex connector, buffered fiber, two blue boots FC2-SC-SM-J06 . . . . . . . . . . . . SC duplex connector, jacketed fiber, blue boot Add “-B” to the end of part number for bulk pack (Simplex: 100/box, Duplex: 50/box). Duplex ST EPOXY POLISH CONNECTORS The ST connector employs a rugged metal bayonet coupling ring with radial ramps which facilitate engagement to the studs of the mating adapter. Two ST connectors are available for jacketed fiber, one with a beige boot and one with a black boot. The two colors enable easy identification of the fibers when terminating individual connectors to form a duplex jumper. MULTIMODE (XGLO and LightSystem) Part # Description FC1-SA-MM-J80 . . . . . . . . . . . . ST simplex connector, jacketed fiber, beige boot FC1-SA-MM-B80. . . . . . . . . . . . ST simplex connector, buffered fiber, beige boot Add “-B” to the end of part number for bulk pack (100/box). Buffered SINGLEMODE (XGLO) Part # Description FC1-SA-SM-J06 . . . . . . . . . . . . ST simplex connector, jacketed fiber, blue boot FC1-SA-SM-B06 . . . . . . . . . . . . ST simplex connector, buffered fiber, blue boot Jacketed Add “-B” to the end of part number for bulk pack (100/box). 6.10 www.siemon.com
LC EPOXY POLISH CONNECTORS (XGLO ® & LIGHT<strong>SYSTEM</strong> ® ) Siemon LC products offer all the benefits of SC and ST connections in a Small Form Factor (SFF), high-density design. LC adapter products are compatible with our popular MAX ® , CT, FOB, and MX-SM work area and telecommunications room products, providing a wide variety of installation options. LC connectors take just two minutes to terminate, using the Siemon LightSpeed ® Termination Kit. FIBER MULTIMODE Part # Description FC1-LC-MM-B80. . . . . . . . . . . . LC simplex connector, beige, multimode, buffered fiber, beige boot FC2-LC-MM-J80 . . . . . . . . . . . . LC duplex connector, beige, multimode, jacketed fiber, beige boots SINGLEMODE Part # Description FC1-LC-SM-B02 . . . . . . . . . . . . LC simplex connector, blue, singlemode, buffered fiber, white boot FC1-LC-SM-J02 . . . . . . . . . . . . LC simplex connector, blue, singlemode, jacketed fiber, white boot LIGHTSPEED ® ST, SC FIBER TERMINATION KIT Achieve faster fiber terminations and higher performance with Siemon’s LightSpeed Termination Kit. The Siemon fiber termination kit contains all the tools required for termination of multimode or singlemode ST or SC connectors — packaged in a rugged canvas carrying case. Use the optional LC Upgrade Kit (see below) for LC connector terminations. All consumables must be ordered separately as noted below.* Part # Description FTERM-L2 . . . . . . . . . . . . . . . . . LightSpeed Fiber Termination Kit for ST and SC multimode connectors* Note: Select tools and other termination products supplied with the kit can be ordered separately. *All consumables including primer, adhesive and polishing films are contained in the consumables kit and must be ordered separately. LC FIBER TERMINATION LIGHTSPEED UPGRADE KIT The Siemon LC upgrade kit is used in conjunction with the LightSpeed Termination Kit (FTERM-L2) and has all the accessories to terminate LC connectors using Siemon’s exclusive LightSpeed adhesive. The kit includes an LC microscope head (that attaches to the microscope included with the FTERM-L2), an LC polishing puck and a micro-torch* (to shrink the color-coded LC crimp sleeve tubing). Part # Description FTERM-LC . . . . . . . . . . . . . . . . . LC Fiber Termination Upgrade Kit (used in conjunction with FTERM-L2) Note: Contents of FTERM-LC are also available individually. Contact our Customer Service Department for more information. *Butane fuel not included. www.siemon.com 6.11
Page 1 and 2:
SIEMON SYSTEM CATALOG N E T W O R K
Page 3 and 4:
1.0 2.0 3.0 4.0 Category 7 A /Class
Page 5 and 6:
TERA Outlet Invented by Siemon in 1
Page 7 and 8:
TERA-MAX Patch Panels TERA-MAX 19 i
Page 9 and 10:
TERA Patch Cords TERA CATEGORY 7 A
Page 11 and 12:
TERA S/FTP 1000 MHz 4-Pair Cable (U
Page 13 and 14:
CATEGORY 7 A /CLASS F A PRODUCTS ww
Page 15 and 16:
DON’T BLINK Best-in-class categor
Page 17 and 18:
Zero-Cross Terminations The crossi
Page 19 and 20:
Z-MAX 6A Shielded Outlets The shiel
Page 21 and 22:
Category 6A Shielded BladePatch Mod
Page 23 and 24:
TERA ® -MAX Patch Panels TERA-MAX
Page 25 and 26:
Siemon Category 6A F/UTP 4-Pair Cab
Page 27 and 28:
Z-MAX 6A UTP System Features and Be
Page 29 and 30:
Z-MAX 6A UTP Modular Cords Combinin
Page 31 and 32:
Z-MAX 6A UTP Patch Panels Z-MAX pat
Page 33 and 34:
Category 6A UTP 4-Pair Cable (Ameri
Page 35 and 36: Z-MAX 6 UTP Outlets The category 6
Page 37 and 38: Z-MAX 6 UTP Patch Panels Z-MAX patc
Page 39 and 40: 12-PORT HD ® 6 MOUNTED ON S89D BRA
Page 41 and 42: MAX ® PATCH PANELS Part # Descript
Page 43 and 44: BladePatch ® 6 UTP Modular Cords S
Page 45 and 46: IC 6 SOLID SINGLE-ENDED MODULAR COR
Page 47 and 48: S210 ® FIELD TERMINATED 19 INCH PA
Page 49 and 50: Category 6 UTP Trunking Cable Assem
Page 51 and 52: System 6 UTP 4-Pair Cable (US) COMP
Page 53 and 54: PREMIUM AND SYSTEM 6 UTP www.siemon
Page 55 and 56: MAX ® 5e Shielded Modules The shie
Page 57 and 58: BladePatch ® 5e Shielded Modular C
Page 59 and 60: System 5e ® COMPLIANCE • ISO/IEC
Page 61 and 62: PREMIUM AND SYSTEM 5E F\UTP www.sie
Page 63 and 64: MAX ® 5e UTP Modules MAX 5e module
Page 65 and 66: HD ® 5e UTP Patch Panels Siemon’
Page 67 and 68: MC ® 5e UTP Modular Cords Siemon u
Page 69 and 70: S110 ® Connection System Siemon S1
Page 71 and 72: S110 ® 19 INCH FIELD TERMINATION P
Page 73 and 74: Premium 5e ® UTP 4-Pair Cable (US)
Page 75 and 76: PREMIUM 5e AND SYSTEM 5e UTP www.si
Page 77 and 78: SIEMON PLUG AND PLAY MODULES Siemon
Page 79 and 80: MTP ® TO MTP EXTENDERS Constructed
Page 81 and 82: XGLO ® JUMPERS AND PIGTAILS XGLO f
Page 83 and 84: VALULIGHT JUMPERS AND PIGTAILS Val
Page 85: XLR8 Pre-Polished Connectors Combi
Page 89 and 90: Fiber Trunking Cable Assemblies FIB
Page 91 and 92: Fiber Trunking Cable Assemblies CAB
Page 93 and 94: XGLO 10 Gigabit Ethernet Fiber Opti
Page 95 and 96: XGLO 10 Gigabit Ethernet Fiber Opti
Page 97 and 98: LightSystem ® Gigabit Ethernet Fib
Page 99 and 100: LightSystem ® Gigabit Ethernet Fib
Page 101 and 102: FIBER www.siemon.com 6.25
Page 103 and 104: Rack Mount Interconnect Center (RIC
Page 105 and 106: Wall Mount Interconnect Center (SWI
Page 107 and 108: Fiber Connect Panel (FCP3) Siemon
Page 109 and 110: HEAT SHRINK SLEEVES Heat shrink sle
Page 111 and 112: MapIT G2 Master and Distribution Co
Page 113 and 114: MapIT G2 Copper Systems MapIT G2 Sm
Page 115 and 116: MapIT G2 Fiber Systems MapIT G2 Sma
Page 117 and 118: MapIT ® G2 INFRASTRUCTURE MANAGEME
Page 119 and 120: LockIT Secure Connectivity System T
Page 121 and 122: MAX Modular Faceplates The MAX modu
Page 123 and 124: 10G MAX ® INTERNATIONAL FACEPLATES
Page 125 and 126: MAX ® TAMPER-PROOF FACEPLATE Siemo
Page 127 and 128: MX-SM SURFACE MOUNT BOXES Field-ass
Page 129 and 130: FIBER OUTLET BOX (FOB2) Siemon’s
Page 131 and 132: FACEPLATES AND MOUNTING ACCESSORIES
Page 133 and 134: VersaPOD Features and Benefits Sie
Page 135 and 136: VersaPOD Ordering Information VP-V
Page 137 and 138:
RS3 CABLE MANAGEMENT RACK SYSTEM Si
Page 139 and 140:
RS RACK SYSTEM Siemon’s RS series
Page 141 and 142:
Vertical Patching Channels (VPC) Si
Page 143 and 144:
RACK ACCESSORIES Siemon offers a fu
Page 145 and 146:
VersaPOD RACKS AND CABLE MANAGEMENT
Page 147 and 148:
Industrial MAX ® Siemon is well-kn
Page 149 and 150:
INDUSTRIAL MAX ® 6 MODULAR PATCH C
Page 151 and 152:
Industrial LC Fiber Connectivity An
Page 153 and 154:
INDUSTRIAL www.siemon.com 11.7
Page 155 and 156:
STM-8 The STM-8 is an economical an
Page 157 and 158:
Z-TOOL TM and Accessories The Z-TOO
Page 159 and 160:
S110 ® /S210 ® MULTI-PAIR TERMINA
Page 161 and 162:
ALLPREP CABLE PREPARATION TOOL The
Page 163 and 164:
Entrance Facility, Telecommunicatio
Page 165 and 166:
Acronyms & Abbreviations ACR . . .
Page 167 and 168:
Warranty Siemon delivers a full ran
Page 169 and 170:
FJ2-SCSC6MM-(XX) . . . . . . . .6.6
Page 171 and 172:
W WM-143-5 . . . . . . . . . . . .
Page 173 and 174:
www.siemon.com
Page 175 and 176:
E-Catalog Products WEB RESOURCES WE
show all

SIEMON SYSTEM CATALOG

Create successful ePaper yourself

Delete template?

Save as template?