NATUROL OEL NATUROL OEL-LASUR - Pentol
NATUROL OEL NATUROL OEL-LASUR - Pentol
NATUROL OEL NATUROL OEL-LASUR - Pentol
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Technical Technical Data Data Sheet<br />
Sheet<br />
Effective: 29-03-2011<br />
Replaces edition dated: 21-10-2008<br />
<strong>NATUROL</strong> <strong>NATUROL</strong> <strong>OEL</strong> <strong>OEL</strong>-<strong>LASUR</strong> <strong>OEL</strong> <strong>LASUR</strong><br />
(<strong>NATUROL</strong> (<strong>NATUROL</strong> OIL OIL GLAZE)<br />
GLAZE)<br />
Description<br />
Description<br />
Data Data Sheet Sheet Sheet No. No. 2056<br />
2056<br />
Product Product Product description description<br />
Naturol Oel-Lasur is an exterior / interior open-pore wood glaze based on<br />
natural resins and vegetable oils. The unique combination of binding agents<br />
allows the glaze to penetrate very deep into the wood, emphasizes the natural<br />
character of the wood, provides lasting moisture protection and does not<br />
flake. Because of the agent-free formulation, Naturol Oel-Lasur can also be<br />
used for apiaries and feed storage rooms.<br />
Binding Binding agent Natural resins and vegetable oils<br />
Area Area of of application: application:<br />
For interior and exterior woodwork with and without dimensional stability.<br />
Because of the agent-free formulation, it can also be used for interiors.<br />
Form Form Form of of of supply supply Colours clear, white and colours according to our colour range<br />
covering according to RAL or NCS-S assortment<br />
Gloss level mat to satin gloss (depending on the number of coats)<br />
Packing Packing<br />
1 l, 5 l, 10 l, 25 l, 200 l clear<br />
1 l, 5 l, 18 l pigmented<br />
Technical Technical Data<br />
Data<br />
The data apply for: clear. They may vary for other colours.<br />
Specific Specific gravity gravity (23º (23º C) C)<br />
0.95 g/cm³<br />
Solids Solids content content<br />
42 ± 2 % by weight<br />
VOC VOC VOC content content (EU) (EU)<br />
375 g/l<br />
Shelf Shelf Shelf life life 20° 20° 20° C C<br />
12 months in tightly sealed original containers.<br />
Theoretical Theoretical coverage coverage<br />
100 g/m² � 10 m²/kg depending on the wood surface.<br />
Safety Safety Data<br />
Data<br />
Observe our Safety Data Sheet no. 205600<br />
as as well as as the instructions on the label.<br />
<strong>Pentol</strong>, <strong>Pentol</strong>, Eine Eine Marke Marke der der Feyco Feyco AG, AG, Industriestrasse Industriestrasse 11, 11, CH-9430 CH<br />
9430 St. St. St. Margrethen Margrethen Page Page 1 1 of of of 3<br />
3<br />
Fon: Fon: Fon: +41 +41 71 71 71 747 747 747 84 84 84 11 11 Fax: Fax: Fax: +41 +41 +41 71 71 747 747 85 85 85 10 10 www.pentol<br />
www.pentol-lacke.ch<br />
www.pentol lacke.ch lacke.ch HH/HI H/HI Aussen Aussen Aussen rm<br />
rm
Technical Technical Data Data Sheet Sheet No. No. 2056 2056<br />
Page Page 2 of of 3<br />
Preparation<br />
Preparation<br />
Substrate Substrate Substrate<br />
Product Data sheet Coat thickness<br />
Preparation Preparation for for for new new cladding:<br />
cladding:<br />
Impregnation 1 x <strong>Pentol</strong> Stabilo FFF, all sides 207400<br />
Intermediate sanding P 150 - 180 grain Fladder brushes<br />
Intermediate coat 1 x Naturol Oel-Lasur, all sides 205600<br />
Top coat 1 x Naturol Oel-Lasur, visible sides 205600<br />
Surface Surface Surface preparation preparation<br />
preparation<br />
Application<br />
Application<br />
<strong>Pentol</strong> <strong>Pentol</strong> <strong>Pentol</strong> Holzschutz, Holzschutz, Holzschutz, CH CH-9430 CH 430 St. St. St. Margrethen<br />
Margrethen<br />
Margrethen<br />
Please contact our technical staff for further application suggestions.<br />
Substrate Substrate<br />
Every substrate must be clean, dry and free of grease and oil.<br />
Moisture content of the wood: Max. 16%<br />
Amount per coat: Planed / sanded wood surfaces ca. 70 g/m 2<br />
Unplaned wood surfaces ca. 120 g/m 2<br />
Naturol Oel-Lasur can also be used on rough lumber if no agents<br />
are required to preserve the wood.<br />
Personal Personal protection protection Even if not required by law, wearing personal protective equipment is<br />
recommended.<br />
CH: The precautions prescribed by SUVA with respect to hygiene and<br />
equipment must be observed.<br />
Stirring Stirring<br />
Stir glaze well before use.<br />
Dilution Dilution<br />
Ready to use<br />
Brush Brush Brush painting painting Undiluted<br />
Rolling Rolling<br />
Undiluted
Technical Technical Data Data Sheet Sheet No. No. 2056 2056<br />
Page Page 3 of of 3<br />
<strong>Pentol</strong> <strong>Pentol</strong> <strong>Pentol</strong> Holzschutz, Holzschutz, Holzschutz, CH CH-9430 CH 430 St. St. St. Margrethen<br />
Margrethen<br />
Margrethen<br />
Viscosity Dilution Nozzle Pressure Spray coats<br />
Gravity Gravity feed feed gun gun 22 s DIN 4mm None 1.5 – 1.8 3 bar 1 cross-spray<br />
Airless Airless Airless (airmix) (airmix) spraying spraying 22 s DIN 4mm None 09 – 11<br />
(Wagner)<br />
Vacumat Vacumat –<br />
Automatic Automatic spraying<br />
spraying<br />
machines machines –<br />
Brushing Brushing machines<br />
machines<br />
22 s DIN 4mm 0 – 10%<br />
Drying Drying time time<br />
At 23° C and 65% rel. humidity<br />
Important Important Important information<br />
information<br />
Dust-dry after: 6 h<br />
Touch-dry after: 12 h<br />
Recoatable after: 24 h<br />
3-4 bar 1 cross-spray<br />
Special Special restrictions restrictions<br />
The suitability of Naturol Oel-Lasur is limited for hardwoods and exotic<br />
woods. If using Naturol, always spot test first!<br />
Minimum Minimum aapplication<br />
a pplication and and<br />
drying drying temperature<br />
temperature<br />
Coat Coat removal removal<br />
Sanding<br />
10 °C Not below the dew point.<br />
Equipment Equipment cleanup cleanup cleanup<br />
With Sangajol V400. Dried material with thinner V130.<br />
This data sheet is for your reference and information only. The above data are correct to the best of our knowledge. We offer no guarantees<br />
for use and exclude any liability. This applies in particular to consequential damage. We are not liable for any advice given by our employees.<br />
Our employees give non-binding information only. Site supervision, compliance with handling regulations, and adherence to recognized<br />
engineering rules are the responsibility of the manufacturer, even if our employee was on site during handling. Modifications due to technical<br />
developments may be made. The latest version of this information is applicable. In special cases, please request separate technical<br />
specifications.