Flowmeters Thai Co.,Ltd.

FLOWMETERS Thai Co.,LTD.
Flowmeters expert in Thailand.
Paddle Wheel ,Turbine ,Magnetic ,Ultrasonic ,Vortex ,V-Cone ,VA ,PD Mass Flowmeters with Ultrasonic & Radar Level Transmitter etc.
Flowmeters
Product Overview
Paddle & Turbine Flowmeters
Flow Computer
Insertion Magnetic Flowmeters
Inline Hi accuracy Magnetic Flowmeters
Ultrasonic Flowmeters
Vortex Flowmeters
Oval Gear PD Oil Flowmeters
Coriolis Mass Flowmeters
Flowmeters Thai Co.,Ltd.
Address 555/100 B-Avenue , Sukhapiban 5 Road , Au-Ngen , Saimai , Bangkok 10220 Thailand
Tel.:662-1925930 , Fax.:662-1925932 , E-mail:sales@flowmeters.co.th , www.flowmeters.co.th
The One Stop Service Solution for Flowmeters, Level, Pressure, Temperature, Humidity and Water Analyzer such as :pH, ORP, Conduct, Resist, DO, Turbid, SS. &Chlorine
Flowmeters Thai Co.,Ltd. >>> The Flowmeters expert in Thailand.
More info please contact: sales@flowmeters.co.th Web Site www.flowmeters.co.th

Company Profile
Water Analysis & Air Environment Instruments
Application for Water ,Waste Water Treatment Plant or Industrial Process
ประวัติความเป็ นมาของบริษัท โฟลว์มิเตอร์ไทย จํากัด
ที่ตั ้งสํานักงาน : เลขที่ 555/100 หมู ่บ้าน บี อเวนิว ถนนสุขาภิบาล 5 แขวงออเงิน เขตสายไหม กรุงเทพ ฯ 10220
การก่อตั ้ง : บริษัท โฟลว์มิเตอร์ไทย จํากัด เป็ นบริษัทในเครือของ บริษัท ออโตเมชั่น ฮันเตอร์ จํากัด (2538)
ซึ่งมีประสบการณ์ทางด้านจัดจําหน่ายและบริการสินค้าเครื่องมือวัดและควบคุมทางอุตสาหกรรมมา มากกว่า 18 ปี
และต่อมาได้ก่อตั ้ง บริษัท โฟลว์มิเตอร์ไทย จํากัด เมื่อวันที่ 18 กรกฎาคม 2549 เพื่อจําหน่ายและบริการ เครื่องวัดการไหล
นอกจากนี้ยังมีเครื่องมือวัดชนิดอื่นๆอีก เช่น เครื่องมือวัดระดับ , ความดัน ,อุณหภูมิ ,ความชื้น และเครื่องวัดคุณภาพนํ้า
ที่ใช้ในระบบงานสาธารณูปโภคต่างๆ เช่น ผลิตนํ้าดีและบําบัดนํ้าเสีย ในโรงงานอุตสาหกรรมเกือบทุกประเภท เช่น โรงผลิต
นํ้าประปา โรงบําบัดนํ้าเสีย โรงผลิตไฟฟ้ า โรงงานอิเลคทรอนิคส์ เคมี ฟอกย้อม ผลิตยา ผลิตอาหารและเครื่องดื่ม เป็นต้น
Mix& Match 1-3 Channel Analysis
Instruments for measurement
Conductivity /Resistivity
PH /Redox (ORP)
Dissolved Oxygen
Suspended Solids/Turbidity
Chlorine or Other parameter as
Ozone ,Flow ,level etc. by
4..20mA Input cards
HXT63 Series Transmitter
Manufacturers of
Instrumentation and
Sensor for liquid analysis
Pressure , Submersible Level ,Temp./Hum/Dew P. & CO
บริษัท โฟลว์มิเตอร์ไทย จํากัด
ที่อยู ่ 555/100 หมู ่บ้าน บีอเวนิว ถนน สุขาภิบาล 5 แขวงออเงิน เขตสายไหม กรุงเทพฯ 10220
โทร. 02 1925930 ,086-3680110, แฟกซ์ 02-1925932, E-mail :sales@flowmeters.co.th ,www.flowmeters.co.th
The One Stop Service Solution for Flowmeters, Level, Pressure, Temperature, Humidity and Water Analyzer such as :pH, ORP, Conduct, Resist, DO, Turbid, SS. &Chlorine
2
Flowmeters Thai Co.,Ltd.
www.flowmeters.co.th 11

Flow Indicator ,Flow Computer & Data Logger
Small size inline Flowmeters
AH Series
(Wall Mount)
AHP Series
(Panel Mount)
Model Selection
G Instruments
AH(AHP) 111 :Flow indicator/transmitter/Logger
AH(AHP) 101 :Same AH111 but with battery power
AH(AHP) 111-MB :Flow computer with RS485 Modbus
AH(AHP) 111-AB :Flow Computer with Dual pulse input
AH(AHP) 240 :Flow Computer with 4-20 mA Input
AH(AHP) 200 :Flow Computer with ATC input for Oil & Gas
AH Series Feature
Digital Display flow rate & 3 x Totalizer with engineering unit
With 4 –20 mA & Programmable digital Output Application
For Hi –Lo Alarm ,Batch ,Total Limit or Pulse Dosing pump control
GFC 300 Flow computer
GFC 300 Feature
A Single or Dual Channel ( Flow/Temp/Pressure input)
For volume compensated mass , liquids ,Gas
Flow rate /Total and control of liquids ,Gas
Output 1 -2 x relay, 1-2 x4..20mA ,1 –2 x Pulse ,RS485 modbus
FT400-Series
Data Logger : DL76
FT400 Feature
Digital Display 2 line flow rate & Totalizer
FT420 With 12 –24 Vdc Loop power 4 ..20mA & 2x pulse Output
FT415W with Battery Power 3—5year, 2 x pulse Output
DL76 Feature
Power : 3.6 Vdc lithium battery , Battery Life : 3-5 years
Accept Pulse or dry contact Input from any Flowmeters
Data logger : Rate and Total Unit setting up & down load with FI Software
Data Storage From 11 day (@ Interval 15 sec.)Up to 3 year (@ Int.24 min.)
Titan 300
S Series Flow
PE 102
Turbine
Application
Semiconductor plant , Cooling equipment , Drinks dispensing
300 Feature
Body : PVDF , O-ring : Viton , Power : 24 VDC , Output : Pulse
Max Temperature : 100 C , Max Pressure : 10 bar
Flow range : 0.6 - 10 LPM. , Pipe size 3/8 “
Application
Low flow monitoring , Chemical batching , Fertilizer injection
S Series Feature
Body; SPX:PP / SPT :PTFE /SES:316 SS, O-ring :EPDM/ Viton , Rotor :PVDF
Power : 24 VDC , Output : Pulse , Accuracy : +1% of full scale
Temperature : 70/93 C , Pressure : 10/35 bar
Size & Flow range 3/8” : 0.27-18.9 LPM , 1/2”: 0.38-37.9 LPM
Size : 3/4” : 0.75-75 LPM , 1”: 1.9—150 LPM
Electro-magnetic
Application
Chemical injection , Low flow applications (metering
PE102 Feature
Body : PVDF , O-ring : EPDM , Power : 10 –15 VDC
Output : Pulse , 4 –20 mA, Accuracy : +1% of full scale
Temperature : 93 C , Pressure : 10 bar
Size & Flow range 3/8” :0.113 - 11.35 LPM ,3/4” :0.75 – 75.7 LPM
Ultrasonic
KDF –2100 Flow Computer
KDF 2100 Feature
3 inputs :Flow (pulse/4 –20mA ,Temp. and pressure Transmitter
Output :4 –20mA ,Pulse ,Relay & RS-485 modbus RTU
Measuring medium of steam, natural gas, or chemical
Can be used with vortex , turbine or V-cone flowmeters
Atrato
Application
Laboratory tests , Semiconductor plant , Coffee Drink dispensing
Atrato Feature
Body: PEEK /316SS ,O-ring: Viton ,Power :24VDC ,LCD display Rate/Totalizer
Output : Pulse ,Relay , 4 –20 mA and USB interface with Batch function
Fitting 3/8 John guest or 1/2” BSP Pressure max.:10 bar
3 Flow range : 0.002 - 0.5 LPM , 0.02 - 5.0 LPM & 0.1 - 20 LPM
10
Flowmeters Thai.co.ltd.
www.flowmeters.co.th
3

Medium size fixed insertion & Inline Flowmeters
Paddlewheel
Application
Industrial water , Cooling water monitoring , Industrial fluid control
IP80 Feature IP81 :1” -3” , IP82 :1” –8”
Body : PVC/PP/316SS , Rotor : PVDF , O-Ring : EPDM /Viton
Low friction loss ,long life jewel bearings
Power : 6 —24VDC , Accuracy +/-1.5% , Pulse Output
Temperature : 60 / 93 C , Pressure : 12/ 14 bar
Turbine
Application
Water treatment , Treated wastewater , Cooling water monitoring
TX80 Feature TX81 :1” -3” , TX82 :1” –8”
Body : PVC/316SS/Brass , Rotor : PVDF , O-Ring : EPDM /Viton
Low friction loss ,long life jewel bearings
Power : 6 -24VDC , Accuracy +/-1 - 1.5% , Pulse Output
Temperature : 60 / 93 C , Pressure : 12/ 14 bar
Insert Electromagnetic
Application
Conductive fluids , Industrial water/wastewater treatment
EX80 Feature EX81 :1” -3” , EX82 :1” –10” ,EX83 :1” -12”
Body : PVC/316SS ,O-Ring : EPDM /Viton , Electrodes : Hastelloy
Power : 24VDC , Pulse Output , Accuracy +/-1.%
Temperature : 60 / 93 C , Pressure : 10/ 14 bar
Flow Range : 0.3 - 20 ft./sec. , Pipe size : 1-1/2”- 12”
Option: Meter or Wall mount FT420M/W loop power 4..20mA & 2x pulse
Inline Electromagnetic
Application
Pipe size : 1” -10” , Industrial water/wastewater ,
Municipal water/ Raw water
WM Feature
Body model WMP: PP ,WMX: Carbon Steel
Electrodes:316 SS ,:Battery Power or 12 -24 VDC with pulse
Output (-101) ,Accuracy +/- 1% of reading
With flow rate / 8 digit Totalizer Display
Option ext. data logger DL76W for WMP 101
WMX option with build-in data logger or
IP68 for 4”-10” (std.WMX 3” ductile cast iron IP68)
Air/Gas/Steam & Hi-Temperature Fluid Flowmeters
Vortex Flowmeter
Inline Vortex Feature
Connection : Wafer type (Flange Clamp) ,pipe range 1/2” to 12”
Power : 24VDC ,Output : Pulse /4-20 mA , material : 304 SS
Temperature : -40 to 250 deg C , Rated pressure : PN16
Accuracy : Air/Gas & steam : 1.5% , Liquid : 1%
Insert Vortex Feature
Connection : Insertion type , pipe range 12” to 64”
Power : 24VDC ,Output : Pulse /4-20 mA , material : 304 SS
Temperature : -40 to 250 deg C , Rated pressure : PN16
Accuracy : Air/Gas & steam : 1.5% , Liquid : 1%
V Cone Flowmeter
Application
Free from blockage ,low pressure loss than Orifice plate
Natural gas , Flue gas , Air
Steam: saturated steam, overheated steam
Water: Drinking water, production water, sewage water
V Cone Feature
Measured Fluid: Steam, Gas, Liquid
Pipe and Flange: 304Stainless Steel, Carbon Steel
Nominal Diameter: DN15~DN2000
Accuracy : ±0.5%
Repeatability: ±0.1%
Rated Pressure: ≤ 16MPa, Maximum≤ 42MPa
Working Temperature: -40~700
4
Flowmeters Thai.co.ltd.
www.flowmeters.co.th
9

Oil & Chemical Flowmeters
Big size Adjustable insertion Flowmeters
Oval Gear Flow
Application
Boiler management , Engine tests , Oil flow , Active flow alarms
PD400 Feature
Body - Aluminium , Gears - Polysulfone , 24 VDC , ±2.5% accuracy
Range : 1 to 40 Litres per hour , Connection : 1/8” Male Fitting , Max 60 C
Application
Pipe range : 1/4” - 2” , Engine test , Oil flow , High viscosity fluids
OG Series Feature
Over Gear Flowmeters , Body : 316SS/Peek/Aluminum , Seal : Viton/EPDM
Pressure rate: 10/50/400 bar , Temperature rate : 80/100/150 °C
Power : 12 - 24 VDC ,Output : Pulse , Accuracy: ± 0.5%. , Range : 0.01- 500 L/M
Connection : BSP or NPT female threads, flanges
Double Rotor PD & Mass Flow
Application
Pipe range : DN 15 - DN 400 , High viscosity fluids , Diesel Oil , Crude Oil
PD Flow Feature
Double Rotator Flowmeter ,Body :Cast Steel or 304SS ,Rotator :304SS or 316SS
Pressure : 16-64 bar , Temperature :-20 to +250 °C ,24 VDC
With Display Flowrate/Totalizer ,Output : Pulse /4-20 mA
Accuracy: ± 0.5% / 0.2% , Viscosity : 0-20,000 mPa.s , Connection : Flange
Application
Pipe range : DN 8 - DN 300 , Oil , Gas , Chemical, Water, Milk, Beverage
Mass Flow Feature
Medium: Gas/Liquid ,With Display Flowrate /Totalizer ,Supply: 24VDC
Output : Pulse /4-20 mA/RS485 , Accuracy: 0.1% , 0.2% , 0.5%
Working Temperature (): -50 to +350 , Pressure max.:16 / 25 Bar
IP 100/200-SERIES
TX100/200-SERIES
EX100/200-SERIES
Paddlewheel
Application
Pipe 3”- 40 “, Clean water , Water Treatment Plant monitoring
IP Series Feature
Body : Brass/316SS , O-Ring : EPDM , Rotor : PVDF
Accuracy +/-1.5 % , Power : 24VDC , Pulse Output
Temperature : 93 C , Pressure 14 bar , Flow Range : 0.1 - 9 m/sec.
Adapter Fitting - No valve : IP101/201 (1-1/2” NPT)
Turbine
Application
Pipe 3”- 40 “, Clean water , Large pipes , City Water & Raw water
TX Series Feature
Body : Brass/316SS , O-Ring : EPDM , Rotor : PVDF
Accuracy +/-1.5 % , Power : 24VDC , Pulse Output
Temperature : 93 C , Pressure 14 bar , Flow Range : 0.15 - 9 m/sec.
Adapter Fitting Size - No valve : (TX101/201 : 1-1/2” NPT)
Electromagnetic
Application
3”- 48” pipe , Clean or “dirty” liquids , Water & wastewater
EX Series Feature
Body : Brass/316SS, O-Ring: EPDM , Electrodes : Hastelloy
Electrodes Cap : PVDF , Power : 24VDC , Pulse Output
Temperature : 93 C , Pressure 14 bar , Accuracy +/-1 %
Min Conductivity : 20 microSiemens/cm
Flow Range : (0.08 - 6.09 m/sec)
Adapter Fitting Size - No valve : (EX101/201 : 1-1/2” NPT)
Example for Installation
IP80-SERIES EX80-SERIES
EX200-SERIES
8
Flowmeters Thai.co.ltd.
www.flowmeters.co.th
5

Flowmeters & Level Transmitter
Ultrasonic Flowmeters
Inline Electromagnetic Flowmeters
Pmag Series
Smag Series
Pmag Feature
Body : 321SS., CS Flange, Liner : Rubber / PTFE , Electrodes : 316 SS/Hastelloy C.
Power : 85 –265 VAC or 24VDC , Output : 4-20mA /Pulse / MODBUS RTU(HART)
Pressure : 10/16/40 bar , Temp.max: 75/80 °C , Connection : DIN/ANSI 150 lb flange
Accuracy: ± 0.5%. , Measure range: 0.2m3/h - 30000m3/h. , IP rating : IP67/IP68
Size: DN10 - DN1000 ,Compact / Remote mounting ,for Industrial water & wastewater
Smag Feature
Body : 304 SS, Liner : PTFE/PFA ,Electrodes : 316 SS , Fluid conductivity:>5μS/cm
Power : 220VAC ,Output : 4-20mA /Pulse ,Pressure : 16 bar ,Temperature: 75 /120 °C
Accuracy: ± 0.5%. , Measure range: 0.6m3/h - 300m3/h. , IP rating : IP67/IP68
Connection : DIN 11851 Flange Or DIN 304SS CLAMP Flange ISO 2852
Size: DN20 - DN100 ,Compact / Remote Transmitter, For Food , beverage & Chemical
Ultrasonic Flowmeters /Calorimeter is one of a transit –time flowmeters work by measuring the time of flight difference between an
ultrasonic pulse sent in the flow direction and ultrasonic pulse sent opposite the flow direction. For Application
Water, Drainage water ,Seawater ,Chiller Heating energy, Boiler feed water , Petroleum as Diesel oil, Chemicals and many more
Pipeline leak detection ,Pump Test, Main supply pipe ,DI water plant ,Operation and maintenance ,Pulp and paper , Many others
Ultrasonic Open Channel Flow & Level Transmitter
Flow Meter
Flowmeter Feature
Materials : Polypropylene ,Connection: 2” Threaded
IP 65/67 , Temperature: -30 to + 70 ° C
Supply: 24vDC , LCD Matrix display & Key pad
Measuring Range: 0.25 - 5 m., Accuracy: ± 0.15%
Output : 4—20mA , 2x Relay & RS485 modbus RTU
Level Meter
522 Smart
PTU series
Meter Feature
Supply: 24vDC , Removable LCD display & Key pad
Measuring Range: 0.25 - 5 m., Accuracy: ± 0.15%
Output :2 wire 4—20mA , 20 –36 Vdc Option (Hart) or
Output :4 wire 4—20mA ,2x Relay & RS485 modbus RTU
Feature for: PTU ,521 ,522 Transducer
Enclosure : PP ,Installation: 1" BSP or DN100 flange
Output :RS485 or 4..20mA ,IP 65/ 68 , supply : 24v DC
Measuring range :0 - 5 m , 6 m , 8 m , 12 m ,15 m.
RPL Radar Feature
Measurement Non-contact for solids, liquids, pulps , slurries
Measurement range :0 –10 m. up to 70 m, Accuracy: ± 3 -10mm
Temperatures up to 180° C , Pressures up to 40 Bar
Power supply : 2 /4 wire 24vDC , Analogue Output 4-20mA (Hart)
Simple on site configuration via a menu driven matrix display
Ultrasonic S200 Feature
High Accuracy better than ±1% ,Repeatability ±0.2% ,Linearity ± 0.5% ,with SD cards data record up to 5 year (for 200S)
Wide range from several type transducer S, M ,L for selection from size DN15—DN6000 ( 1/2 “ - 240” )
Power full function (for 200S/200M) Analog Output: 1 x 4-20mA, 2 x OCT pulse with RS 485 Modbus Communication
Addition function (for 200S/200M) Analog Input : 3 x 4.– 20mA for PT ,LT etc.. ,2 x Pt100 RTD 3 wire Temp. Sensor
Transducers (for 200H :magnetic clamp-on sensor rack) ,Pipe range: HS :DN15 –DN100 ,HM :DN50 –DN300
6
Flowmeters Thai.co.ltd.
www.flowmeters.co.th
7