Testo 350 Field Guide - Actoolsupply.com
Testo 350 Field Guide - Actoolsupply.com
Testo 350 Field Guide - Actoolsupply.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
www.actoolsupply.<strong>com</strong><br />
In all segments of a <strong>com</strong>bustion process <strong>com</strong>bustion analysis provides important<br />
information about <strong>com</strong>bustion details and <strong>com</strong>position of the flue gases.<br />
Thus <strong>com</strong>bustion analyzers are indispensable process devices for reliable and<br />
economical plant operation, to guarantee product quality and to <strong>com</strong>ply with<br />
emission regulations.<br />
Gas analyzers are offered in great variety by many manufacturers. Analyzers are<br />
based on different measuring principles, mostly optimized for the analysis of certain<br />
<strong>com</strong>ponents. More details are available in chapter 4.<br />
<strong>Testo</strong> gas analyzers are extensively utilized in industry for the analysis of <strong>com</strong>bustion<br />
gases with the area of emission control being just one field of application.<br />
The following applications are well established:<br />
1. Adjustment and service measurements for general plant upgrade purposes,<br />
for localization of process instabilities, for checks after repair work or<br />
as preparation in advance of regulatory measurements.<br />
2. Process measurements for <strong>com</strong>bustion optimization analyzing fuel, <strong>com</strong>bustion<br />
air and <strong>com</strong>bustion gases in order e.g. to reduce fuel costs, to improve<br />
plant efficiency or to extend the lifetime of the plant. These applications<br />
are also related to emission control (see below) because optimized plant operation<br />
normally will cause a reduction of emission levels.<br />
3. Process measurements for control of a defined gas atmosphere in special<br />
furnaces or kilns for processes such as burning (e.g. cement), sintering or<br />
surface treatment.<br />
4. Process and emission measurements for function control of flue gas<br />
cleaning installations.<br />
5. Emission measurements at the stack to monitor the emission values of pollutants<br />
and to ensure <strong>com</strong>pliance with the official regulations.<br />
26<br />
www.actoolsupply.<strong>com</strong>