Testo 350 Field Guide - Actoolsupply.com
Testo 350 Field Guide - Actoolsupply.com
Testo 350 Field Guide - Actoolsupply.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
www.actoolsupply.<strong>com</strong><br />
• Official single measurements according to TI Air must be performed by<br />
using devices that have been certified for that by passing successfully a<br />
dedicated suitability test. This is as well obligatory for stationary equipment to<br />
perform continuous measurements.<br />
• <strong>Testo</strong>-gas analyzers are suitable, tested and certified for single as well as for<br />
continuous measurements.<br />
Section 3.3 handles regulations concerning definite sorts of installations, see<br />
table 12.<br />
Section<br />
of TI Air<br />
Sort of installation<br />
3.3.1 Heat generation, mining, energy<br />
3.3.2 Stone and clay<br />
3.3.3 Steel, iron, and other metals<br />
3.3.4 Chemical products, pharmaceuticals, refineries<br />
3.3.5 Surface treatment, foil production, processing of plastics<br />
3.3.6 Wood, pulp<br />
3.3.7 Food stuff, agriculture products<br />
3.3.8 Waste incineration (meanwhile replaced by the 17. Ordinance)<br />
3.3.9 Storing, loading and unloading of materials<br />
3.3.10 Other<br />
Special case Power stations >50 MW (gas-fired: >100 MW) are handled<br />
separately by the 13. ordinance!<br />
Tab. 12: Grouping of TI Air, section 3.3, for definite sorts of installations<br />
Please note:<br />
Limit values specified for definite sorts of installations are included in most of the<br />
application examples given in chapter 5 of this handbook.<br />
38<br />
www.actoolsupply.<strong>com</strong>