M300 Filters - parama nusa utama

M300 Filters
flow rates filtration degrees water for cleaning minimum min. operating pressure
up to 1100 m³/h
(4840 US gpm)
3000-15 micron
less than 1% of the
total flow
2 bar (30 psi)
Versatile and efficient self cleaning hydraulic filters
that require no external power source
features:
Large filtration area, reliable operating mechanism and simple construction, make the M300
filters the ideal solution for industrial and municipal filtration systems where no power is available
Multi-layer coating for extra durability
Compact lightweight design for easy installation and maintenance
Cost effective solution for wide range of flow-rates and filtration degree requirements
Automatic flushing according to pressure differential and/or time interval
No interruption of downstream flow during flushing
Especially custom-made filters available: High Temperature, High pressure, etc.
a m i a d f i l t r a t i o n s o l u t i o n s

How the FILTOMAT M300 Filters Work
General
The Amiad FILTOMAT M300 Series are cost effective, easy-to-operate, automatic filters with an hydraulic
self-cleaning mechanism that doesn’t require external power source to operate.
With their various screen areas, the “M300” models support a wide range of flow-rates, 25-1100 m³/h
(110–4840 US gpm), with filtration degrees of 3000 down to 15 micron and inlet/outlet diameters from 2”-16”.
The Filtering Process
The filtration process begins when raw water flows through the Filter Inlet (1) into the Coarse Screen (2).
Here, the water is pre-filtered in order to protect the cleaning mechanism from large debris.
The water then passes through the inner surface of the Fine Screen (3), dirt particles are trapped and accumulate
inside the filter while clean water flows out of the Filter Outlet (4).
The gradual dirt buildup on the inner screen surface causes a Filter Cake to develop, with a corresponding increase
in the differential pressure across the screen’s inner and outer surfaces.
The Self-Cleaning Process
When the differential pressure across the screen reaches a pre-set value, the filter’s Rinse Controller (5) starts the
cleaning cycle. In the piston-less models the Hydraulic Valves (6) are activated and in the M300 piston models the
Piston (7) together with the Hydraulic Valves are activated. This creates a pressure drop in the Motor Chamber (8)
and a back-flush stream that flows out of the filter to the drain through the Nozzles (9), the Dirt Collector (10)
and the Hydraulic Motor (11). The vacuum action and spiral motion of the Dirt Collector cleans 100% of the fine screen.
The byPass Option (M400 models)
In applications that require continuous supply of water, such as in fire protection systems, Amiad provides the
optional M400 bypass feature. The bypass is triggered in cases of system fault that cause the filter’s screen to
become blocked. Unfiltered water follows through the bypass until the screen is cleaned. Once the screen is
cleaned, the filter resumes normal operation.
“M300 SERIES” Models
For covering its wide range of flow-rates, Amiad’s
“FILTOMAT M300 SERIES” is provided in the
following maingroups divided by their screen area:
(9)
(3)
(6)
Filtomat M300-400/750 (piston-less)
Supporting flow-rates of 25-80 m 3 /h
(110-350 US gpm)
Filtomat M300-1500 Supporting flow-rates
of 25-80 m 3 /h (110-350 US gpm)
Filtomat M300-3000 Supporting flow-rates
of 80-300 m 3 /h (350-1320 US gpm)
Filtomat M300-4100/4600 Supporting flowrates
of 150-400 m 3 /h (660-1760 US gpm)
Filtomat M300-6100/7000 Supporting flowrates
of 400-1100 m 3 /h (1760-4840 US gpm)
(2)
(4)
OUTLET
(5)
(11)
(8)
(7)
(10)
(1)
INLET
a m i a d f i l t r a t i o n s o l u t i o n s

Filtomat M300-400/750 Piston-Less Filters
Technical Specifications
Filter Type M302LP M303P M304P
General Data
Maximum flow rate*
25 m³/h
(110 US gpm)
40 m³/h
(175 US gpm)
80 m³/h
(350 US gpm)
Inlet/Outlet diameter
Threaded 2” (50 mm)
BSP or NPT
Flanged 3” (80 mm)
Flanged 4” (100 mm)
Filtration degrees
Min. working pressure
Max. working pressure
Max. working temperature
15, 25, 40, 50, 80, 100, 120, 150, 200, 400, 800, 1000, 1500, 3000 micron
2 bar (30 psi)
Can be lower if pressure is increased for flushing
10 bar (150 psi)
65°C (149°F)
Weight
Empty = 40 kg (88 lb)
Full = 60 kg (132 lb)
Empty = 46 kg (101 lb)
Full = 71 kg (156.5 lb)
Empty = 60 kg (132 lb)
Full = 95 kg (209 lb)
* Consult Amiad for optimum flow depending on filtration degree & water quality.
Flushing Data
Minimum flow for flushing
(at 2 bar -30 psi)
25 m³/h
(110 US gpm)
25 m³/h
(110 US gpm)
40 m³/h
(176 US gpm)
Reject water volume per flush
cycle (at 2 bar -30 psi)
35 liter
(9.24 US gallon)
35 liter
(9.24 US gallon)
55 liter
(14.52 US gallon)
Flushing cycle time
3-5 seconds
Exhaust valve
2”
50 mm
2”
50 mm
1-2 x 2”
1-2 x 50 mm
Flushing criteria
Differential pressure of 0.5 bar (7psi), time intervals and manual operation
Screen Data
Filter area
Flat = 400 cm² (62.9 in²)
4-layer = 500 cm² (81.8 in²)
Flat = 400 cm² (62.9 in²)
4-layer = 500 cm² (81.8 in²)
Flat = 750 cm² (118.7 in²)
4-layer = 950 cm² (147 in²)
Screen types
Flat, 4-layer, zigzag
Construction Materials*
Filter housing
Filter lid
Cleaning mechanism
Exhaust valve
Seals
Control
Epoxy-coated carbon steel 37-2. (Stainless steel 316 on request)
Epoxy-coated carbon steel 37-2. (Stainless steel 316 on request)
High density polypropylene
PVC and stainless steel 316l
Brass, stainless steel 316, BUNA-N
BUNA-N
Aluminum, brass, stainless steel 316, PVC, acetal
* Amiad offers a variety of construction materials. Consult us for specifications.
a m i a d f i l t r a t i o n s o l u t i o n s

Filtomat M300-1500 Filters
Technical Specifications
Filter Type M302LPE M303LPE M304LPE M306PE
General Data
Maximum flow rate*
25 m³/h
(110 US gpm)
40 m³/h
(175 US gpm)
80 m³/h
(350 US gpm)
80 m³/h
(350 US gpm)
Inlet/Outlet diameter Threaded 2” (50 mm) Flanged 3” (80 mm) Flanged 4” (100 mm) Flanged 6” (150 mm)
Filtration degrees
15, 25, 40, 50, 80, 100, 120, 150, 200, 400, 800, 1000, 1500, 3000 micron
Min. working pressure
Max. working pressure
Max. working temperature
2 bar (45 psi)
Can be lower if pressure is increased for flushing
10 bar (150 psi)
65°C (149°F)
Weight
Empty = 80 kg (176 lb)
Full = 140 kg (308 lb)
Empty = 93 kg (205 lb)
Full = 153 kg (337 lb)
Empty = 100 kg (220 lb)
Full = 180 kg (398 lb)
Empty = 108 kg (238 lb)
Full = 198 kg (436 lb)
* Consult Amiad for optimum flow depending on filtration degree & water quality.
Flushing Data
Minimum flow for flushing
(at 2 bar -30 psi)
Reject water volume per flush
cycle (at 2 bar -30 psi)
Flushing cycle time
Exhaust valve
Flushing criteria
30 m³/h
(132 US gpm)
83 liter
(22 US gallon)
7-10 seconds
2”
50 mm
Differential pressure of 0.5 bar (7psi), time intervals and manual operation
Screen Data
Filter area
Screen types
Flat = 1500 cm² (232.4 in²)
4-layer = 2200 cm² (341 in²)
Flat, 4-layer, zigzag
Construction Materials*
Filter housing
Filter lid
Cleaning mechanism
Exhaust valve
Seals
Control
Epoxy-coated carbon steel 37-2. (Stainless steel 316 on request)
Epoxy-coated carbon steel 37-2. (Stainless steel 316 on request)
High density polypropylene
PVC and stainless steel 316L
Brass, stainless steel 316, BUNA-N
BUNA-N
Aluminum, brass, stainless steel 316, PVC, acetal
* Amiad offers a variety of construction materials. Consult us for specifications.
a m i a d f i l t r a t i o n s o l u t i o n s

Filtomat M300-3000 Filters
Technical Specifications
Filter Type M304LP M306LP M308P
General Data
Maximum flow rate*
80 m³/h
(350 US gpm)
150 m³/h
(660 US gpm)
300 m³/h
(1320 US gpm)
Inlet/Outlet diameter Flanged 4” (100 mm) Flanged 6” (150 mm) Flanged 8” (200 mm)
Filtration degrees
15, 25, 40, 50, 80, 100, 120, 150, 200, 400, 800, 1000, 1500, 3000 micron
Min. working pressure
Max. working pressure
Max. working temperature
2 bar (30 psi)
Can be lower if pressure is increased for flushing
10 bar (150 psi)
65°C (149°F)
Weight
Empty = 100 kg (220 lb)
Full = 180 kg (396 lb)
Empty = 127 kg (279 lb)
Full = 250 kg (550 lb)
Empty = 144 kg (316 lb)
Full = 284 kg (625 lb)
* Consult Amiad for optimum flow depending on filtration degree & water quality.
Flushing Data
Minimum flow for flushing
(at 2 bar -30 psi)
50 m³/h
(220 US gpm)
50 m³/h
(220 US gpm)
50 m³/h
(220 US gpm)
Reject water volume per flush
cycle (at 2 bar -30 psi)
140 liter
(37 US gallon)
140 liter
(37 US gallon)
140 liter
(37 US gallon)
Flushing cycle time
7-10 seconds
Exhaust valve
2 x 2”
2 x 50 mm
2 x 2”
2 x 50 mm
2 x 2”
2 x 50 mm
Flushing criteria
Differential pressure of 0.5 bar (7psi), time intervals and manual operation
Screen Data
Filter area
Flat = 3000 cm² (465 in²)
4-layer = 4800 cm² (744 in²)
Flat = 3000 cm² (465 in²)
4-layer = 4800 cm² (744 in²)
Flat = 3000 cm² (465 in²)
4-layer = 4800 cm² (744 in²)
Screen types
Flat, 4-layer, zigzag
Construction Materials*
Filter housing
Filter lid
Cleaning mechanism
Exhaust valve
Seals
Control
Epoxy-coated carbon steel 37-2. (Stainless Steel 316 on request)
Epoxy-coated carbon steel 37-2. (Stainless Steel 316 on request)
High density Polypropylene
PVC and Stainless Steel 316L
Brass, Stainless steel 316, BUNA-N
BUNA-N
Aluminum, Brass, Stainless steel 316, PVC, Acetal
* Amiad offers a variety of construction materials. Consult us for specifications.
a m i a d f i l t r a t i o n s o l u t i o n s

Filtomat M300-4100/4600 Filters
Technical Specifications
Filter Type M310P M306XLP M308LP
General Data
Maximum flow rate*
400 m³/h
(1760 US gpm)
150 m³/h
(660 US gpm)
300 m³/h
(1320 US gpm)
Inlet/Outlet diameter Flanged 10” (250 mm) Flanged 6” (150 mm) Flanged 8” (200 mm)
Filtration degrees
15, 25, 40, 50, 80, 100, 120, 150, 200, 400, 800, 1000, 1500, 3000 micron
Min. working pressure
Max. working pressure
Max. working temperature
2 bar (30 psi)
Can be lower if pressure is increased for flushing
10 bar (150 psi)
65°C (149°F)
Weight
Empty = 250 kg (550 lb)
Full = 500 kg (1100 lb)
Empty = 142 kg (312 lb)
Full = 252 kg (554 lb)
Empty = 160 kg (352 lb)
Full = 340 kg (748 lb)
* Consult Amiad for optimum flow depending on filtration degree & water quality.
Flushing Data
Minimum flow for flushing
(at 2 bar -30 psi)
50 m³/h
(220 US gpm)
75 m³/h
(330 US gpm)
75 m³/h
(330 US gpm)
Reject water volume per flush
cycle (at 2 bar -30 psi)
140 liter
(37 US gallon)
210 liter
(55.4 US gallon)
210 liter
(55.4 US gallon)
Flushing cycle time
7-10 seconds
Exhaust valve
2 x 2”
2 x 50 mm
2-3 x 2”
2-3 x 50 mm
2-3 x 2”
2-3 x 50 mm
Flushing criteria
Differential pressure of 0.5 bar (7psi), time intervals and manual operation
Screen Data
Filter area
Flat = 4100 cm² (632 in²)
4-layer = 6700 cm² (1042 in²)
Flat = 4600 cm² (723 in²)
4-layer = 7500 cm² (1156 in²)
Flat = 4600 cm² (723 in²)
4-layer = 7500 cm² (1156 in²)
Screen types
Flat, 4-layer, zigzag
Construction Materials*
Filter housing
Filter lid
Cleaning mechanism
Exhaust valve
Seals
Control
Epoxy-coated carbon steel 37-2. (Stainless steel 316 on request)
Epoxy-coated carbon steel 37-2. (Stainless steel 316 on request)
High density polypropylene
PVC and stainless steel 316L
Brass, stainless steel 316, BUNA-N
BUNA-N
Aluminum, brass, stainless steel 316, PVC, acetal
* Amiad offers a variety of construction materials. Consult us for specifications.
a m i a d f i l t r a t i o n s o l u t i o n s

Filtomat M300-6100/7000 Filters
Technical Specifications
Filter Type M310LP M312P M314P M316P
General Data
Maximum flow rate*
400 m³/h
(1760 US gpm)
600 m³/h
(2640 US gpm)
900 m³/h
(3960 US gpm)
1100 m³/h
(4840 US gpm)
Inlet/Outlet diameter Flanged 10” (250 mm) Flanged 12” (300 mm) Flanged 14” (350 mm) Flanged 16” (400 mm)
Filtration degrees
15, 25, 40, 50, 80, 100, 120, 150, 200, 400, 800, 1000, 1500, 3000 micron
Min. working pressure
Max. working pressure
Max. working temperature
2 bar (30 psi)
Can be lower if pressure is increased for flushing
10 bar (150 psi)
65°C (149°F)
Weight
Empty = 268 kg (589 lb)
Full = 548 kg (1205 lb)
Empty = 291 kg (640 lb)
Full = 631 kg (1388 lb)
Empty = 315 kg (693 lb)
Full = 745 kg (1639 lb)
Empty = 435 kg (9576 lb)
Full = 885 kg (1947lb)
* Consult Amiad for optimum flow depending on filtration degree & water quality.
Flushing Data
Minimum flow for flushing
(at 2 bar -30 psi)
75 m³/h
(330 US gpm)
75 m³/h
(330 US gpm)
75 m³/h
(330 US gpm)
75 m³/h
(330 US gpm)
Reject water volume per
flush cycle
(at 2 bar -30 psi)
250 liter
(54 US gallon)
250 liter
(54 US gallon)
250 liter
(54 US gallon)
250 liter
(54 US gallon)
Flushing cycle time
7-10 seconds
Exhaust valve
3 x 2”
3 x 50 mm
Flushing criteria
Differential pressure of 0.5 bar (7psi), time intervals and manual operation
Screen Data
Filter area
Flat = 6100 cm² (945 in²)
4-layer = 10000 cm²
(1550 in²)
Flat = 6100 cm² (945 in²)
4-layer = 10000 cm²
(1550 in²)
Flat = 7000 cm² (1085 in²)
4-layer = 12000 cm²
(1860 in²)
Flat 7000 cm² (1085 in²)
4-layer = 12000 cm²
(1860 in²)
Screen types
Flat, 4-layer, zigzag
Construction Materials*
Filter housing
Filter lid
Cleaning mechanism
Exhaust valve
Seals
Control
Epoxy-coated carbon steel 37-2. (Stainless steel 316 on request)
Epoxy-coated carbon steel 37-2. (Stainless steel 316 on request)
High density polypropylene
PVC and stainless steel 316L
Brass, stainless steel 316, BUNA-N
BUNA-N
Aluminum, brass, stainless steel 316, PVC, acetal
* Amiad offers a variety of construction materials. Consult us for specifications.
a m i a d f i l t r a t i o n s o l u t i o n s

Filtomat M300-400/750 Piston-Less Filters
M302 LP
*650 (26”)
452 (17.8”)
*405 (16”)
Ø300 (11.8”)
150 (6”)
145 (5.7”)
Filtomat M300-1500 Filters
M302 LPE
*1860 (73”)
*500 (20”)
1121 (44”)
DRAIN
Ø 300 (11.8”)
450 (17.7”)
450 (17.7”)
Dim. In mm (inch)
*Approx. length required for maintenance
a m i a d f i l t r a t i o n s o l u t i o n s

Pressure Loss Graphs
PSI
14.0
BAR
1.0
0.8
7.0
5.0
4.0
3.0
0.6
0.4
0.2
M304
2.0
1.4 0.1
0.08
0.7
0.5
0.4
0.06
0.04
M302
M303
0.3
0.02
0.2
M³/H
2
4
6
10
20
50
100
200
500
1000
US GPM
6
10
20
40
60
100
200
400
1000
2000
4000
PSI
14.0
BAR
1.0
0.8
7.0
5.0
4.0
0.6
0.4
M306
3.0
0.2
M304
2.0
1.4 0.1
0.08
M303
0.7
0.5
0.4
0.06
0.04
M302
0.3
0.02
0.2
M³/H
US GPM
6
2
10
4
20
6
40
10
60
20
100
50
200
100
400
200
1000
500
2000
1000
4000
a m i a d f i l t r a t i o n s o l u t i o n s

Filtomat M300-3000 Filters
M304 LP
*2660 (105”) *500 (20”)
1520 (60”)
Ø300 (11.8”)
900 (35”)
DRAIN
450 (17.7”)
Filtomat M300-4100/4600 Filters
M310 P
*3400 (134”)
1951 (76.8”)
*500 (20”)
Ø 450 (17.7”)
DRAIN
1100 (43”) 450 (17.7”)
INLET
OUTLET
Filtomat M300-6100/7000 Filters
M312 P
*5100 (201”)
*500 (20”)
2710 (106.7”)
Ø 450 (17.7”)
DRAIN
Dim. In mm (inch)
*Approx. length required for maintenance
INLET
1100 (43”) 450 (17.7”)
OUTLET
a m i a d f i l t r a t i o n s o l u t i o n s

Pressure Loss Graphs
PSI
14.0
7.0
5.0
4.0
3.0
BAR
1.0
0.8
0.6
0.4
0.2
M308
2.0
1.4 0.1
0.08
0.7
0.5
0.4
0.06
0.04
M304
M306
0.3
0.02
0.2
M³/H
US GPM
40
10
60
20
100
50
200
100
400
200
1000
500
2000
1000
4000
PSI
14.0
7.0
5.0
4.0
BAR
1.0
0.8
0.6
0.4
M310
3.0
2.0
0.2
M308
1.4 0.1
0.08
0.06
0.7
0.04
0.5
0.4
0.3 0.02
0.2
M306
M³/H
US GPM
40
10
60
20
100
50
200
100
400
200
1000
500
2000
1000
4000
PSI
14.0
BAR
1.0
0.8
7.0
5.0
4.0
0.6
0.4
M316
3.0
2.0
0.2
M314
1.4
0.7
0.5
0.4
0.1
0.08
0.06
0.04
M310
M312
0.3 0.02
0.2
M³/H
US GPM
40 60 100
200
200
500
1000
400 600 1000 2000 4000
2000
10000
a m i a d f i l t r a t i o n s o l u t i o n s

industry
Automotive, Aviation, Ballast treatment,
Electronics, Food & Beverage, Mining,
Oil & Gas, Petrochemical, Power
Generation, Pulp & Paper
municipal
Potable Water, Waste Water,
Desalination, Brackish Water, High rise
buildings, Pre-filtration to Membranes
irrigation
Agriculture, Golf & Turf,
Aquaculture, Green Houses
Manufacturer & Headquarters
Amiad Filtration Systems Ltd. D.N. Galil Elyon 1, 12335, Israel,
Tel: 972 4 690 9500, Fax: 972 4 690 9391
E-mail: info@amiad.com www.amiad.com
North America
Amiad Filtration Systems, 2220 Celsius Avenue, Oxnard,
California 93030, USA, Tel: 1 805 988 3323,
Fax: 1 805 988 3313, E-mail: info@amiadusa.com
South America
Amiad Oil & Gas, Benito Nardone 2219, Montevideo, Uruguay
Tel: 598 2 7117617, Fax: 598 2 7120816,
E-mail: amisur@adinet.com.uy
Holland
Amiad Oil & Gas, POB 237, 1500EE Zaandam, The Netherlands
Tel: 31 (0) 72 5070487, Fax: 31 (0) 72 5070587,
E-mail: oilfield@amiad.com
Far East
Filtration & Control Systems Pte. Ltd., 19B Teo Hong Road,
088330 Singapore, Tel: 65 6 337 6698, Fax: 65 6 337 8180,
E-mail: fcs1071@pacific.net.sg
Australia
Amiad Australia Pty Ltd. 138 Northcorp Boulevard,
Broadmeadows, Victoria 3047, Tel: 61 3 93585800,
Fax: 61 3 93585888, E-mail: amiad@amiad.com.au
China
Taixing Environtec Co. Ltd., 70 Baihe Chang,
Xingjie Yixing Jiangsu, 214204, Tel: 86 510 87134000,
Fax: 86 510 87134999, E-mail: marketing@taixing.cc
France
Amiad France S.A.R.L. Ilot N o 4 ZI La Boitardière, 37530 Chargé,
Tel: 33 (0) 2 47 23 01 10, Fax: 33 (0) 2 47 23 80 67
E-mail: info@amiadfrance.com
Germany
Amiad Filtration Solutions (2004) Ltd. Zweigniederlassung
Deutschland Prinz-Regent-Str. 68 a 44795 Bochum
Tel: 49 (0) 234 588082-0, Fax: 49 (0) 234 588082-10
E-mail: info@amiad.de
Turkey
FTS – Filtration & Treatment Systems, Istanbul yolu 26 Km,
Yurt Orta Sanayii, Saray, Ankara, Tel: 90 312 8155266/7,
Fax: 90 312 8155248, E-mail: info@fts-filtration.com
India
Amiad Filtration India Pvt Limited, 305 Sai Commercial Building
Govandi St Rd, Govandi Mumbai 400 088,
Tel: 91 22-67997813/14, Fax: 91 22-67997814,
Email: jsk@bom2.vsnl.net.in
NP.00946/10.2009
a m i a d f i l t r a t i o n s o l u t i o n s