Engine
Engine
Engine
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DIAGNOSTICS / MEASUREMENT<br />
120<br />
IGNITION<br />
Part# Description/Use<br />
YU-A1927 Fluke Model 88 Multimeter w/Tachometer<br />
This multimeter’s features include volt, ohm, amp, continuity and diode tests, rpm<br />
measurements with the provided inductive pickup, minimum/maximum/average<br />
recording of measurements, frequency and duty cycle measurements, low-ohms<br />
function, millisecond pulse width measurements, and smoothing (shows an<br />
averaged reading of measurements which fluctuate such as rpm).<br />
Included accessories: holster, inductive pickup, hard carrying case, test leads, test<br />
probes, large alligator clips, users manual and quick reference guide.<br />
YU-03112-C Analog Multimeter<br />
18 meter ranges performs these tests: D.C.V .0 - 5, 25, 125, 500V (20,000 Ohms/Y),<br />
A.C.V .0 - 10, 50, 250, 1,000V, D.C.A .0 - 50A, 0- 250MA, 2.5A,<br />
Resistance: 0-2K-20K-2Meg (center scale 24), Continuity: Test Electric Buzzer<br />
(1.5ohms) Includes: All test leads.<br />
YU-91026 Ignition Timing Tester<br />
This ignition timing tester uses both sound and light signal for optimum accuracy.<br />
Self-powered (batteries included). Features an exclusive “Illumination Lamp.”<br />
Size: 2-1/2” x 1” x 3-3/4”. Warranty: one year. Made in Japan.<br />
YU-33261-B Ignition Coil Tester<br />
This unit features an adjustable gap (0 to 15mm) for precise testing of open and<br />
closed magnetic circuit coil systems. It tests both 6 and 12 volt coils on point and,<br />
CDI and transistor-type ignitions. Professional quality. Made in Japan.<br />
SPECIFICATIONS ME-7A IGNITION COIL TESTER<br />
Power Source: AC 120V, 50/60Hz Single Phase<br />
Dimensions: 159mm(W) x 99mm(D) x 273mm(H)<br />
Weight: Approximately 1.4kgs. (3.60lbs)<br />
Accessories: Tester includes high tension cable-one set<br />
red and black colored and adapter-one piece.<br />
YU-45481 Ignition Mate<br />
This dual-display peak voltage ignition tester shows constant signals (peak voltage)<br />
and pulsed signals (spark energy) at the same time. The Ignition Mate is compact<br />
and uses either the 12V vehicle battery or its own internal battery source.<br />
Detailed instructions, impact resistant rubber holder and a foam-lined storage<br />
case are included.<br />
YU-A8332<br />
YU-A8332 Replacement High Tension Lead<br />
(for coil over spark plugs)