Engine

SHOP TOOLS & EQUIPMENT
40
CRANK REBUILD
Part# Description/Use
YE-22200 Crankshaft Truing Stand
Made in U.S.A. by ROWE. Designed to work on single-cylinder to
four-cylinder crankshafts. Can also be used to check fork tube
trueness. Center to center distance 17” with 15” swing. Includes
knife-edge bearings to support crank shafts and a sliding holder
for dial indicator (dial indicator not included).
YE-22201 Crankshaft Dual Adapter Kit.
Kit includes clamp and rod. Allows dual
readings on crankshaft truing stand.
YE-22202 Replacement Bearing Set.
YE-22100 IMS Single Cylinder Crankshaft Assembly Fixture
This fixture will assemble all Japanese, European and ATV single-cylinder
crankshafts. Set includes: assembly fixture, and six-axle bushing adapters:
20mm, 22mm, 25mm, 28mm, 30mm and 32mm.
Single-Cylinder Crankshaft Assembly Fixture
YE-22101 Demonstration Video-crankshaft
Disassembly and Assembly Shows how
to use IMS rebuilding fixtures.
YE-22203 Crankshaft Disassembly Tool
This fixture is designed to disassemble most single and twin
cylinder applications.
Note: May not work on YZ80
YE-23405 Steel “V” Block Set
For precision measuring and straightening operations. Made from cold
rolled steel. (not cast) V blocks measure approx.
1-1/4” x 1-3/4” x 5”.
Sold in pairs.
YU-35557 Puller
2-1/4” max. reach.
Designed for separating and pulling bearings and close-fitting gears.
YU-22912-1 Puller
4-1/4” max. reach.
Designed for separating and pulling bearings and close-fitting gears.
YM-01067-A Piston Base Holder
3/16” thick x 5-1/4” length
YM-01067-A1 Piston Base Holder
1/2” thick x 6-3/4” length