Engine

SHOP TOOLS & EQUIPMENT
46
HEAD REBUILD
Part# Description/Use
YM-A9371 NEWAY “Gizmatic”
The “Gizmatic” is the most efficient tool for refacing valves by hand.
Crank-style lever turns the blades against the stationary valve face.
This crank provides the operator with enough leverage to make the
job effortless, while a second lever allows the operator to control the
feed rate of the blades. The “Gizmatic” features soft jawed V-blocks,
which hold the valve stem securely in a vise while the cone, either 45º
or 30º, automatically centers itself on the valve face.
YM-A9370 Easy-Turn Wrench
The Easy-Turn Wrench helps you get more out of your Neway valve
seat cutters. This handy accessory enables you to keep the cutter
turning continuously so the seats are finished faster. Comfortable to
use, the Easy-Turn Wrench allows you to feel the amount of material
being removed.
YM-A9373 Valve Concentricity Gauge
The Valve Concentricity Gauge is a precision gauge used to quickly and
accurately measure valve face to valve stem concentricity. May be used
before and after reconditioning. Accurate within .0005 inch (0.01mm).
YE-23450 Adjustable Cylinder Head Stand
The Adjustable Cylinder Head Stand can be used to rotate the head
360 degrees. Stays in any position using a simple locking mechanism.
Shipping weight: 14 lbs. Adjustable length-10 1/2” to 20 1/2” long x
14” width x 10 3/4” high.
YE-23460 Cylinder Head Stands
Cylinder Head Stands make the cylinder head easier to work on!
Sturdy stands will hold head safely and securely. The stand is rigid
on uneven surfaces. Tapered pins fit any size cylinder head bolt hole.
Sold as a 2 piece set.
YM-A8998 Valve Lapping Tool
The Valve Lapping Tool is the ultimate vacuum stick for insuring
perfect surfaces on valves and valve seats. Interchangeable cups
make unit suitable for use with virtually any size valve. Set includes
vacuum stick, 3/4” and 1/4” diameter rubber cups.
YM-A0309 Clover Valve Lapping Compound
The world famous green can with the four leaf clover. This compound
kit is for seating valves, mating gears, and sharpening. Sold as a kit with
coarse 120 grit (roughing) and 280 fine grit (finishing).