inch - korloy
inch - korloy
inch - korloy
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
NC6205 / NC6210<br />
Chip breaker line-up<br />
Negative type<br />
Positive type<br />
ap(<strong>inch</strong>)<br />
GR<br />
1 st recommendation<br />
VK<br />
-MA<br />
(No chip breaker)<br />
ap(<strong>inch</strong>)<br />
1 st recommendation<br />
C25<br />
VM<br />
B25<br />
HMP<br />
New CVD grade for cast iron turning NC6205 / NC6210<br />
Feature of VK chip breaker<br />
fn(ipr)<br />
• Strong cutting edge<br />
Excellent chipping resistance for<br />
machining in interrupted cutting<br />
conditions<br />
• Special nose “R” shape<br />
Reduces the frictional heat and cutting<br />
resistance<br />
• Broad area<br />
Decreases the vibration to enhance<br />
clamping power between insert and<br />
holder<br />
fn(ipr)<br />
Grades<br />
Machining Type<br />
Finishing<br />
Grade<br />
NC6205<br />
Recommended cutting speed, vc(sfm)<br />
Chip breaker<br />
Recommended feed and depth of cut rate<br />
Gray cast iron Ductile cast iron (nose R = 0.8 ) fn(ipr)<br />
ap(<strong>inch</strong>)<br />
660~1,650<br />
594~1,320<br />
VM<br />
0.004~0.020<br />
0.039~0.197<br />
Medium and roughing<br />
NC6210<br />
495~1,320<br />
462~1,155<br />
VK<br />
0.006~0.022<br />
0.453~0.236<br />
<br />
Roughing<br />
NC315K<br />
396~990<br />
330~825<br />
-MA<br />
0.008~0.024<br />
0.079~0.276