inch - korloy
inch - korloy
inch - korloy
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PC5300<br />
• Coating layer with high hardness and resistance to high temperatures.<br />
Superior oxidation resistance in steel, cast iron, stainless steel, and heat resistance alloys.<br />
• Ultra fine grain substrate and special treatment of the coating layer.<br />
Increased built-up edge resistance and chipping resistance.<br />
Machining solution with PC5300 per workpiece<br />
PC5300<br />
Competitor<br />
Oxidation test during 1 hour in the 900℃ atmosphere<br />
• Coating layer with high hardness and<br />
oxidation resistance<br />
Less heat oxidation reduces wear on<br />
the surface of insert<br />
High speed machining increases<br />
machinability<br />
For M grade and S grade machining: helps in preventing notch wear<br />
Smooth surface<br />
Fine WC<br />
PC5300<br />
<br />
<br />
Competitor<br />
• Ultra fine grain substrate & coating<br />
layer with improved surface finish<br />
Superior welding resistance and low<br />
notch wear due to high toughness<br />
High machinability in Inconel, stellite<br />
and other HRSA materials<br />
Universal gradePC5300 / NC5330<br />
For K grade machining: preventing wear on the side of insert<br />
Layer Hardness(Gpa)<br />
40<br />
30<br />
20<br />
10<br />
0<br />
Room temp.<br />
Heat treatment<br />
<br />
<br />
<br />
<br />
Competitor A Competitor B PC5300<br />
• Coating layer with high hardness<br />
Longer tool life due to less wear on<br />
the major cutting edge<br />
Good performance in high speed<br />
machining<br />
Grades