CONTROL VALVE BELLOWS SEALED - Euro Chlor

CONTROL VALVE BELLOWS SEALED 

MODEL 350EC8 

STRAIGHT WAY / PROTECTED BELLOWS 

APPLICATIONS & DESIGN FEATURES 

FIG. NO. 350EC8 / ... 

APPROVAL No. 03/01 

APPLICATIONS 

MODEL 350EC8/9 IS DESIGNED FOR FLOW CONTROL IN CRITICAL SERVICE APPLICATIONS INVOLVING LETHAL, TOXIC, 

CORROSIVE, INFLAMMABLE, VOLATILE, RADIATING, OR EXPENSIVE FLUIDS. 

THE MOST COMMON APPLICATIONS ARE 

- DRY CHLORINE (CL2) SERVICE TEMPERATURE -40°C TO 120°C / -40°F TO 248°F 

- ANHYDROUS HYDROGEN CHLORIDE (HCL) 

- ANHYDROUS HYDROFLUORIC ACID (HF) 

- PHOSGENE (COCL2) 

- VINYL CHLORIDE MONOMER (VCM) 

- ETHYLENE DICHLORIDE (EDC) 

- ISOCYANITES (MDI, TDI, HDI, ETC.) AND 

- FLUIDS OF SIMILAR NATURE. 

MODEL 350EC8 (UP TO DN50/2") AND 350EC9 (>DN50/2") ARE EURO CHLOR APPROVED FOR THEIR COMPLIANCE WITH GEST 

98/245. DESIGN AND SELECTED MATERIALS ALSO MEET THE REQUIREMENTS OF CHLORINE INSTITUTE PAMPHLET 6 

SERVICE CLASSES I THROUGH VI. THE UNIQUE VALVE DESIGN GUARANTEES RELIABLE CONTROL PERFORMANCE AND 

EXCELLENT PROTECTION AGAINST LEAKS OR FUGITIVE EMISSIONS. THE STEM SEAL REQUIRES VIRTUALLY NO 

MAINTENANCE DUE TO LEAK FREE WELD CONNECTIONS OF THE BELLOWS WITH BONNET AND STEM. CONSTANT PACKING 

MONITORING AND RE-PACKING IS ELIMINATED. IN THE UNLIKELY EVENT OF A BELLOWS FAILURE THE BACKUP PACKING 

GUARANTEES SAFE VALVE PERFORMANCE UNTIL THE NEXT SCHEDULED SHUTDOWN. THE MODULAR VALVE DESIGN 

ALLOWS FLEXIBILITY TO MEET END USER'S ACTUATOR OR ACCESSORIES PREFERENCES. 

DESIGN FEATURES 

BELLOWS AND PACKING 

- BELLOWS PROTECTED IN EXTENDED BODY AGAINST DIRECT 

IMPINGEMENT FROM PRODUCT FLOW 

- MULTIPLE WALLS AND HYDROFORMED BELLOWS 

- 100.000 BELLOWS’ OPERATIONS GUARANTEED 

- PACKING AREA INTEGRAL WITH BONNET – NO WELDED-IN SLEEVE 

STEM 

- METAL-TO-METAL BACK SEAT PROVIDES ADDITIONAL SAFETY 

IN FULLY OPEN POSITION 

- GUIDED STEM ON TOP AND BOTTOM 

BODY AND BONNET 

- BODIES ARE ONE-PIECE FORGINGS OR CASTINGS WITH LARGER THAN 

REQUIRED WALL THICKNESS AND INTEGRAL FLANGES 

- NO WELDS IN PRESSURE BOUNDARY 

- BODY BONNET JOINT GASKET IS FULLY CONFINED TO PREVENT 

GASKET FLOW OR BLOWOUT 

SEATS 

- SOLID HARDFACINGS FOR OUTSTANDING CORROSION 

AND WEAR RESISTANCE 

- REPLACEABLE DISC AND SEAT FOR FLOW RATE MODIFICATION 

ZERO EMISSIONS, ZERO LEAKAGE, LOW MAINTENANCE 

PHÖNIX * P +49 (5693) 988-0 * F +49 (5693) 988-178 * INFO@PHOENIX-ARMATUREN.DE * WWW.PHOENIX-ARMATUREN.DE 

01-2009/MI/REV-00 - 1 -


MODEL 350EC8 


STANDARD MATERIALS OF CONSTRUCTION 

FIG. NO. 350EC8 / ... 

OPTIONS 

OTHER MATERIALS PER CUSTOMER 

REQUIREMENTS ARE AVAILABLE! 

NOTES 

PHÖNIX RESERVES THE RIGHT TO CHANGE 

PRODUCT DESIGN AND SPECIFICATION WITHOUT NOTICE! 

MATERIALS 

ITEM PART NAME LOW TEMP. CARBON STEEL LOW TEMP. CARBON STEEL 

-40°C up to 120°C -40°F up to 248°F 

1 BODY 1.0566 / 1.1138 A350 LF2 / A352 LCC 

2 DISC 1.4571 / 1.0566 A479 316TI / A350 LF2 

OVERLAY STELLITE 6 (≈ 42HRC) STELLITE 6 (≈ 42HRC) 

3 BELLOWS 2.4819 1) HASTELLOY C-276 1) 

3.1 GUIDE RING 2.4819 1) HASTELLOY C-276 1) 

4 BONNET 1.0566 / 1.1138 A350 LF2 / A352 LCC 

6 GLAND FOLLOWER 1.5638 A352 LC3 

7 LOWER STEM 1.4571 2) A479 316TI 2) 

9 BRIDGE 1.0460 A105 / QPQ nitrited 

12 PILLAR 1.4057 AISI 431 

13 HEX. NUT A194 GR. 4 A194 GR. 4 

14 STUD BOLT A320 GR. L7 A320 GR. L7 

15 PACKING PTFE V-RINGS PTFE V-RINGS 


17 HEX. NUT A194 GR. 4 A194 GR. 4 

18 GASKET KAMMPROFIL / PTFE KAMMPROFIL / PTFE 

24 SCREWED-IN SEAT 1.4571 2) A479 GR. 316TI 2) 

SEAT OVERLAY STELLITE 21 (≈ 32HRC) STELLITE 21 (≈ 32HRC) 

30 PNEUMATIC ACTUATOR PHÖNIX MODEL MA1 /2 /3 /3T PHÖNIX MODEL MA1 /2 /3 /3T 

37 WIPER EPDM EPDM 

38 O-RING EPDM EPDM 

60 SILENCER 1.4571 A479 GR. 316TI 

80d POSITION CONTROLLER CUSTOMER REQUIREMENT CUSTOMER REQUIREMENT 

95 NAME PLATE STAINLESS STEEL STAINLESS STEEL 

1) TRIM MATERIAL 1.4571 / 316TI OPTIONAL 

2) MATERIAL 2.4819 / HASTELLOY C-276 OPTIONAL 


- 2 - 01-2009/MI/REV-00

FIG. NO. 350EC8 / ... 


MODEL 350EC8 


PN40 / CLASS 300 IN SIZES DN15 - DN50 / 0.5" - 2" 

TESTING / MARKING 

- TEST AND DESIGN ACC. TO GEST 89/140, GEST 86/128, GEST 86/129 

- TÜV APPROVED STRENGTH CALCULATION ACC. TO DIN EN12516-2 

- AVAILABLE FOR BODY & BONNET 

- STANDARD TESTS ACC. TO DIN EN12266, ISO 5208, RESISTANCE AND 

- LEAK TEST ACC. TO ITEM BA/BQ 

- LEAK TEST ON CLOSURE ACC. TO ITEM BO/BN (LEAKAGE RATE 1 = TIGHT) 

- ASME B16.34 / MSS SP 61 / API 598 / BS 6755 

PRESERVATION 

- DRYING AT A TEMPERATURE OF 120°C (248°F) FOR AT LEAST 3 HOURS 

- STUFFING OF DRYING AGENTS (SILICAGEL) INTO THE VALVE 

- BLANKING OF INLET AND OUTLET ORIFICE WITH SUITABLE GASKETS 

- AND BOLTED FLANGES TO AVOID ENTRY OF MOISTURE INTO THE VALVE 

- DISC SECURED IN CLOSED POSITION 

- UNFINISHED SURFACES PROTECTED AGAINST RUST 

- LUBRICATION WITH CHLOROFLUORINATED GREASE 

DIMENSIONS & WEIGHTS 

DN NPS UNIT L L RF L RF H WEIGHT 

DIN ASME ASME 

GLOBE BALL 

15* 

20* 

25 

40 

50 

1/2" * 

3/4" * 

1" 

1 1/2" 

2" 

[MM] 

[MM] 

[MM] 

[MM] 

[MM] 

130 

150 

160 

200 

230 

152 

178 

203 

229 

267 

140 

152 

165 

190 

216 

590 

590 

590 

680 

680 

22 kg 

22 kg 

22 kg 

41 kg 

41 kg 

[IN] 

[IN] 

[IN] 

[IN] 

[IN] 

5.1 

5.9 

6.3 

7.9 

9.1 

6 

7 

8 

9 

10.5 

5.5 

6 

6.5 

7.5 

8.5 

23.0 

23.0 

23.0 

27.0 

27.0 

49 lbs 

49 lbs 

49 lbs 

90 lbs 

90 lbs 

* THESE NOMINAL WIDTHS ARE NOT INCLUDED IN GEST 89/140, CONSTRUCTION AND MATERIAL IN ACC. WITH GEST 89/140 


01-2009/MI/REV-00 - 3 -


MODEL 350EC8-9 


VALVE-SPECIFIC PARAMETERS 

FIG. NO. 350EC8-9 / ... 

FLOW DYNAMICS PARAMETER * 

DN 15 25 40 50 80 100 150 

NPS 1/2" 1" 1 1/2" 2" 3" 4" 6" 

GAS FLOW LIMITATION x T 0.58 

PRESSURE RECOVERY FL 2 0.65 

BEGIN OF CAVITATION z 0.42 0.42 0.42 0.42 0.35 0.33 0.39 

* FOR STANDARD DESIGN ONLY (NOT FOR PERFORATED TRIM, FLOW DIVIDER) 

FLOW COEFFICIENT K V / PRESSURE DROP COEFFICIENT ζ V 

PARABOLIC CONE WITHOUT FLOW DIVIDER 

DN 15 25 40 50 80 100 150 

NPS 1/2" 1" 1 1/2" 2" 3" 4" 6" 

TRAVEL [MM] 11 11 17 17 27 31 46 

SEAT [MM] 8 12.5 8 12.5 20 25 40 25 40 50 63 63 80 100 125 

kvs [M³/H] 2.2 4.9 2.2 4.9 8.3 16 21 17 31 75 90 105 155 225 350 

cvs [USGal/MIN] 2.6 5.7 2.6 5.7 9.6 18.6 24.4 19.7 36 87 104 122 180 261 406 

ζv [-] 129 26 129 26 9.1 14.2 9.3 34.6 10.4 11.6 8.1 14.5 6.7 16 6.6 

PARABOLIC CONE WITH SINGLE STAGE FLOW DIVIDER 

DN 50 80 100 150 

NPS 2" 3" 4" 6" 

TRAVEL [MM] 17 27 31 46 

SEAT [MM] 25 40 25 40 50 63 40 50 63 80 50 63 80 100 125 

kvs [M³/H] 16 25 16 36 63 63 40 63 90 120 75 90 120 200 250 

cvs [USGal/MIN] 19 29 19 42 73 73 46 73 104 139 87 104 139 232 290 

ζv [-] 39 16 256 51 17 17 100 40 20 11 144 100 56 20 13 

PARABOLIC CONE WITH DOUBLE STAGE FLOW DIVIDER 

DN 50 80 100 150 

NPS 2" 3" 4" 6" 

TRAVEL [MM] 17 27 31 46 

SEAT [MM] 25 40 25 40 50 63 40 50 63 80 50 63 80 100 125 

kvs [M³/H] 10 20 16 32 50 63 32 63 90 100 63 90 120 160 200 

cvs [USGal/MIN] 12 23 19 37 58 73 37 73 104 116 73 104 139 186 232 

ζv [-] 100 25 256 64 26 17 156 40 20 16 204 100 56 32 20 

PERFORATED CONE WITHOUT FLOW DIVIDER 

DN 50 80 100 150 

NPS 2" 3" 4" 6" 

TRAVEL [MM] 17 27 31 46 

SEAT [MM] 25 40 25 40 50 63 40 50 63 80 50 63 80 100 125 

kvs [M³/H] 10 20 16 36 50 63 40 63 90 100 63 100 160 200 250 

cvs [USGal/MIN] 12 23 19 42 58 73 46 73 104 116 73 116 186 232 290 

ζv [-] 100 25 256 51 26 17 100 40 20 16 204 81 32 20 13 


- 4 - 01-2009/MI/REV-00

GLOBE VALVE BELLOWS SEALED 

PHÖNIX - POLE POSITION IN BELLOWS SEALED TECHNOLOGY 

PHÖNIX WAS ESTABLISHED AT TH BEGINNING OF LAST CENTURY IN 1910 IN FRANKFURT, GERMANY AS SMALL, 

PRIVATELY OWNED COMPANY. SINCE 1955 PHÖNIX IS WIDELY KNOWN FOR ITS HIGH QUALITY BELLOWS SEALED 

VALVES FOR SEVERE HAZARDOUS CHEMICAL SERVICES. 

THROUGHOUT THE NEARLY ONE HUNDRED 

YEARS OF ITS EXISTENCE, PHÖNIX HAS 

ALWAYS STRIVEN TO DEVELOP A PRODUCT 

LINE EXCEEDING EVEN THE MOST STRINGENT 

REQUIREMENTS OF THE INDUSTRY. 

PHÖNIX OFFERS A COMPLETE LINE 

OF HIGH QUALITY, FIRST CLASS 

PRODUCTS THAT GUARANTEE LONG 

LASTING SAFETY AND RELIABILITY IN 

OUR CUSTOMERS' PLANTS. 

GLOBALLY, PHÖNIX OFFERS ITS 

CUSTOMERS VALVES CONFIRMING 

TO NATIONAL AND INTERNATIONAL 

DESIGN STANDARDS SUCH AS DIN, 

ASME, GOST ETC. IN ADDITION 

PHÖNIX OFFERS TECHNICAL ADVICE 

AND SERVICE FOR COMPLETE VALVE 

PACKAGES. TOGETHER WITH OUR 

QUALIFIED ENGINEERING STAFF AND 

STATE OF THE ART MANUFACTURING 

FACILITY, WE PROVIDE HIGH QUALITY 

PRODUCTS TO ENSURE A LONG 

VALVE LIFETIME WITH HIGH PLANT 

SAFETY. 


08-2008/MI/REV-00 - 4 -


MODEL 350EC9 


APPLICATIONS & DESIGN FEATURES 

FIG. NO. 350EC9 / ... 

APPROVAL No. 03/01 

APPLICATIONS 

MODEL 350EC8/9 IS DESIGNED FOR FLOW CONTROL IN CRITICAL SERVICE APPLICATIONS INVOLVING LETHAL, TOXIC, 

CORROSIVE, INFLAMMABLE, VOLATILE, RADIATING, OR EXPENSIVE FLUIDS. 

THE MOST COMMON APPLICATIONS ARE 

- DRY CHLORINE (CL2) SERVICE TEMPERATURE -40°C TO 120°C / -40°F TO 248°F 

- ANHYDROUS HYDROGEN CHLORIDE (HCL) 

- ANHYDROUS HYDROFLUORIC ACID (HF) 

- PHOSGENE (COCL2) 

- VINYL CHLORIDE MONOMER (VCM) 

- ETHYLENE DICHLORIDE (EDC) 

- ISOCYANITES (MDI, TDI, HDI, ETC.) AND 

- FLUIDS OF SIMILAR NATURE. 

MODEL 350EC8 (UP TO DN50/2") AND 350EC9 (>DN50/2") ARE EURO CHLOR APPROVED FOR THEIR COMPLIANCE WITH GEST 

98/245. DESIGN AND SELECTED MATERIALS ALSO MEET THE REQUIREMENTS OF CHLORINE INSTITUTE PAMPHLET 6 

SERVICE CLASSES I THROUGH VI. THE UNIQUE VALVE DESIGN GUARANTEES RELIABLE CONTROL PERFORMANCE AND 

EXCELLENT PROTECTION AGAINST LEAKS OR FUGITIVE EMISSIONS. THE STEM SEAL REQUIRES VIRTUALLY NO 

MAINTENANCE DUE TO LEAK FREE WELD CONNECTIONS OF THE BELLOWS WITH BONNET AND STEM. CONSTANT PACKING 

MONITORING AND RE-PACKING IS ELIMINATED. IN THE UNLIKELY EVENT OF A BELLOWS FAILURE THE BACKUP PACKING 

GUARANTEES SAFE VALVE PERFORMANCE UNTIL THE NEXT SCHEDULED SHUTDOWN. THE MODULAR VALVE DESIGN 

ALLOWS FLEXIBILITY TO MEET END USER'S ACTUATOR OR ACCESSORIES PREFERENCES. 

DESIGN FEATURES 

BELLOWS AND PACKING 

- BELLOWS PROTECTED IN EXTENDED BODY AGAINST DIRECT 

IMPINGEMENT FROM PRODUCT FLOW 

- MULTIPLE WALLS AND HYDROFORMED BELLOWS 

- 100.000 BELLOWS OPERATIONS GUARANTEED 

- PACKING AREA INTEGRAL WITH BONNET – NO WELDED-IN SLEEVE 

STEM 

- METAL-TO-METAL BACK SEAT PROVIDES ADDITIONAL SAFETY 

IN FULLY OPEN POSITION 

- GUIDED STEM ON TOP AND BOTTOM 

BODY AND BONNET 

- BODIES ARE ONE-PIECE FORGINGS OR CASTINGS WITH LARGER THAN 

REQUIRED WALL THICKNESS AND INTEGRAL FLANGES 

- NO WELDS IN PRESSURE BOUNDARY 

- BODY BONNET JOINT GASKET IS FULLY CONFINED TO PREVENT 

GASKET FLOW OR BLOWOUT 

SEATS 

- SOLID HARDFACINGS FOR OUTSTANDING CORROSION 

AND WEAR RESISTANCE 

- REPLACEABLE DISC AND SEAT FOR FLOW RATE MODIFICATION 

ZERO EMISSIONS, ZERO LEAKAGE, LOW MAINTENANCE 


01-2009/MI/REV-00 - 1 -


MODEL 350EC9 


STANDARD MATERIALS OF CONSTRUCTION 

FIG. NO. 350EC9 / ... 

OPTIONS 

OTHER MATERIALS PER CUSTOMER 

REQUIREMENTS ARE AVAILABLE! 

NOTES 

PHÖNIX RESERVES THE RIGHT TO CHANGE 

PRODUCT DESIGN AND SPECIFICATION WITHOUT NOTICE! 

MATERIALS 

ITEM PART NAME LOW TEMP. CARBON STEEL LOW TEMP. CARBON STEEL 

-40°C up to 120°C -40°F up to 248°F 

1 BODY 1.1138 A352 LCC 

2 DISC 1.4571 / 1.0566 A479 316TI / A350 LF2 

OVERLAY STELLITE 6 (≈ 42HRC) STELLITE 6 (≈ 42HRC) 

3 BELLOWS 2.4819 1) HASTELLOY C-276 1) 

3.1 GUIDE RING 2.4819 1) HASTELLOY C-276 1) 

3.2 RING 2.4819 1) HASTELLOY C-276 1) 

4 BONNET 1.0566 / 1.1138 A350 LF2 / A352 LCC 

6 GLAND FOLLOWER 1.5638 A352 LC3 

7 LOWER STEM 1.4571 2) A479 316TI 2) 

9 BRIDGE 1.0460 A105 / QPQ nitrited 

12 PILLAR 1.4057 AISI 431 

13 HEX. NUT A194 GR. 4 A194 GR. 4 


15 PACKING PTFE V-RINGS PTFE V-RINGS 


17 HEX. NUT A194 GR. 4 A194 GR. 4 

18 GASKET KAMMPROFIL / PTFE KAMMPROFIL / PTFE 

24 SCREWED-IN SEAT 1.4571 2) A479 GR. 316TI 2) 

SEAT OVERLAY STELLITE 21 (≈ 32HRC) STELLITE 21 (≈ 32HRC) 

30 PNEUMATIC ACTUATOR PHÖNIX MODEL MA1 /2 /3 /3T PHÖNIX MODEL MA1 /2 /3 /3T 

37 WIPER EPDM EPDM 

38 O-RING EPDM EPDM 

60 SILENCER 1.4571 A479 GR. 316TI 

80d POSITION CONTROLLER CUSTOMER REQUIREMENT CUSTOMER REQUIREMENT 

95 NAME PLATE STAINLESS STEEL STAINLESS STEEL 

1) TRIM MATERIAL 1.4571 / 316TI OPTIONAL 

2) MATERIAL 2.4819 / HASTELLOY C-276 OPTIONAL 


- 2 - 01-2009/MI/REV-00

FIG. NO. 350EC9 / ... 


MODEL 350EC9 


PN40 / CLASS 300 IN SIZES DN80 - DN150 / 3" - 6" 

TESTING / MARKING 

- TEST AND DESIGN ACC. TO GEST 89/140, GEST 86/128, GEST 86/129 

- TÜV APPROVED STRENGTH CALCULATION ACC. TO DIN EN12516-2 

- AVAILABLE FOR BODY & BONNET 

- STANDARD TESTS ACC. TO DIN EN12266, ISO 5208, RESISTANCE AND 

- LEAK TEST ACC. TO ITEM BA/BQ 

- LEAK TEST ON CLOSURE ACC. TO ITEM BO/BN (LEAKAGE RATE 1 = TIGHT) 

- ASME B16.34 / MSS SP 61 / API 598 / BS 6755 

PRESERVATION 

- DRYING AT A TEMPERATURE OF 120°C (248°F) FOR AT LEAST 3 HOURS 

- STUFFING OF DRYING AGENTS (SILICAGEL) INTO THE VALVE 

- BLANKING OF INLET AND OUTLET ORIFICE WITH SUITABLE GASKETS 

- AND BOLTED FLANGES TO AVOID ENTRY OF MOISTURE INTO THE VALVE 

- DISC SECURED IN CLOSED POSITION 

- UNFINISHED SURFACES PROTECTED AGAINST RUST 

- LUBRICATION WITH CHLOROFLUORINATED GREASE 

DIMENSIONS & WEIGHTS 

DN NPS UNIT L L RF L RF H WEIGHT 

DIN ASME ASME 

GLOBE BALL 

80 

100 

150 

3" 

4" 

6" 

[MM] 

[MM] 

[MM] 

310 

350 

480 

318 

356 

444 

282 

305 

403 

850 

960 

1480 

129 kg 

163 kg 

643 kg 

[IN] 

[IN] 

[IN] 

12.2 

13.8 

18.9 

12.5 

14 

17.5 

11.12 

12 

15.88 

33.0 

38.0 

58.0 

284 lbs 

359 lbs 

1418 lbs 

- OTHER SIZES ON REQUEST 


01-2009/MI/REV-00 - 3 -


MODEL 350EC8-9 


VALVE-SPECIFIC PARAMETERS 

FIG. NO. 350EC8-9 / ... 

FLOW DYNAMICS PARAMETER * 

DN 15 25 40 50 80 100 150 

NPS 1/2" 1" 1 1/2" 2" 3" 4" 6" 

GAS FLOW LIMITATION x T 0.58 

PRESSURE RECOVERY FL 2 0.65 

BEGIN OF CAVITATION z 0.42 0.42 0.42 0.42 0.35 0.33 0.39 

* FOR STANDARD DESIGN ONLY (NOT FOR PERFORATED TRIM, FLOW DIVIDER) 

FLOW COEFFICIENT K V / PRESSURE DROP COEFFICIENT ζ V 

PARABOLIC CONE WITHOUT FLOW DIVIDER 

DN 15 25 40 50 80 100 150 

NPS 1/2" 1" 1 1/2" 2" 3" 4" 6" 

TRAVEL [MM] 11 11 17 17 27 31 46 

SEAT [MM] 8 12.5 8 12.5 20 25 40 25 40 50 63 63 80 100 125 

kvs [M³/H] 2.2 4.9 2.2 4.9 8.3 16 21 17 31 75 90 105 155 225 350 

cvs [USGal/MIN] 2.6 5.7 2.6 5.7 9.6 18.6 24.4 19.7 36 87 104 122 180 261 406 

ζv [-] 129 26 129 26 9.1 14.2 9.3 34.6 10.4 11.6 8.1 14.5 6.7 16 6.6 

PARABOLIC CONE WITH SINGLE STAGE FLOW DIVIDER 

DN 50 80 100 150 

NPS 2" 3" 4" 6" 

TRAVEL [MM] 17 27 31 46 

SEAT [MM] 25 40 25 40 50 63 40 50 63 80 50 63 80 100 125 

kvs [M³/H] 16 25 16 36 63 63 40 63 90 120 75 90 120 200 250 

cvs [USGal/MIN] 19 29 19 42 73 73 46 73 104 139 87 104 139 232 290 

ζv [-] 39 16 256 51 17 17 100 40 20 11 144 100 56 20 13 

PARABOLIC CONE WITH DOUBLE STAGE FLOW DIVIDER 

DN 50 80 100 150 

NPS 2" 3" 4" 6" 

TRAVEL [MM] 17 27 31 46 

SEAT [MM] 25 40 25 40 50 63 40 50 63 80 50 63 80 100 125 

kvs [M³/H] 10 20 16 32 50 63 32 63 90 100 63 90 120 160 200 

cvs [USGal/MIN] 12 23 19 37 58 73 37 73 104 116 73 104 139 186 232 

ζv [-] 100 25 256 64 26 17 156 40 20 16 204 100 56 32 20 

PERFORATED CONE WITHOUT FLOW DIVIDER 

DN 50 80 100 150 

NPS 2" 3" 4" 6" 

TRAVEL [MM] 17 27 31 46 

SEAT [MM] 25 40 25 40 50 63 40 50 63 80 50 63 80 100 125 

kvs [M³/H] 10 20 16 36 50 63 40 63 90 100 63 100 160 200 250 

cvs [USGal/MIN] 12 23 19 42 58 73 46 73 104 116 73 116 186 232 290 

ζv [-] 100 25 256 51 26 17 100 40 20 16 204 81 32 20 13 


- 4 - 01-2009/MI/REV-00

GLOBE VALVE BELLOWS SEALED 

PHÖNIX - POLE POSITION IN BELLOWS SEALED TECHNOLOGY 

PHÖNIX WAS ESTABLISHED AT TH BEGINNING OF LAST CENTURY IN 1910 IN FRANKFURT, GERMANY AS SMALL, 

PRIVATELY OWNED COMPANY. SINCE 1955 PHÖNIX IS WIDELY KNOWN FOR ITS HIGH QUALITY BELLOWS SEALED 

VALVES FOR SEVERE HAZARDOUS CHEMICAL SERVICES. 

THROUGHOUT THE NEARLY ONE HUNDRED 

YEARS OF ITS EXISTENCE, PHÖNIX HAS 

ALWAYS STRIVEN TO DEVELOP A PRODUCT 

LINE EXCEEDING EVEN THE MOST STRINGENT 

REQUIREMENTS OF THE INDUSTRY. 

PHÖNIX OFFERS A COMPLETE LINE 

OF HIGH QUALITY, FIRST CLASS 

PRODUCTS THAT GUARANTEE LONG 

LASTING SAFETY AND RELIABILITY IN 

OUR CUSTOMERS' PLANTS. 

GLOBALLY, PHÖNIX OFFERS ITS 

CUSTOMERS VALVES CONFIRMING 

TO NATIONAL AND INTERNATIONAL 

DESIGN STANDARDS SUCH AS DIN, 

ASME, GOST ETC. IN ADDITION 

PHÖNIX OFFERS TECHNICAL ADVICE 

AND SERVICE FOR COMPLETE VALVE 

PACKAGES. TOGETHER WITH OUR 

QUALIFIED ENGINEERING STAFF AND 

STATE OF THE ART MANUFACTURING 

FACILITY, WE PROVIDE HIGH QUALITY 

PRODUCTS TO ENSURE A LONG 

VALVE LIFETIME WITH HIGH PLANT 

SAFETY. 


08-2008/MI/REV-00 - 4 -

CONTROL VALVE BELLOWS SEALED - Euro Chlor

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?