IMPORTANT SAFETY INSTRUCTIONS - Pro Aqua

IMPORTANT SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
Please read all these instructions carefully prior to using the Pro-Aqua room cleaning system and
the E-nozzle. The E-nozzle should only be used with the Pro-Aqua room cleaning system for the purposes
described in this operating manual.
year
guarantee
1. Always pull out the mains power plug prior to dismantling the E-nozzle/Pro-Aqua room cleaning
system for care.
2. The E-nozzle/Pro-Aqua room cleaning system should always be supervised during use. Children
and persons unfamiliar with operation of the appliance should be kept away from the Pro-Aqua.
3. Never vacuum fl ammable liquids!
4. Avoid vacuuming of hard objects or objects with sharp edges.
5. Do not vacuum cigarettes, matches, ash and/or other smoking or burning objects.
6. Never use the E-nozzle/Pro-Aqua room cleaning system with a damaged mains power cable.
7. Never switch off the E-nozzle/Pro-Aqua room cleaning system with a connected mains cable.
Always pull out the mains plug if the unit is not used for a long period and for maintenance work.
Pull the plug out of the socket and switch off all control elements.
8. Heed the manufacturer’s instructions for use and warnings and only use approved original
accessories.
9. The electrical nozzle should not be exposed to moisture to avoid the risk of electric shock.
Do not use the electrical nozzle outdoors or on damp ground. The electrical nozzle should not
be immersed in water. Always switch off the Pro-Aqua room cleaning system cleaning before
attaching and detaching the electrical brush.
10. Check the electrical hose regularly.
11. Contact the manufacturer if the mains cable is damaged.
12. The manufacturer bears no liability for damage resulting from incorrect use or use contrary to
instructions, unilateral repairs or incorrect maintenance.
10-06
E-nozzles
operating manual

INTEGRAL COMPONENTS
COMPONENTS
BASIC FUNCTIONS
FUNCTIONS
CARE
Direct contact
equipment variant
1. Electrical nozzle (only suitable for dry vacuuming)
2. Telescopic wand for electrical nozzle, stainless steel
3. Pro-Aqua electrical hose (two colours), only suitable for dry vacuuming
Use of electrical nozzle
The Pro-Aqua electrical nozzle is particularly suitable for cleaning heavily-used rugs and carpets, but
also upholstery and mattresses.
The Pro-Aqua electrical nozzle can also be used for vacuuming hard fl oors.
Switch off your Pro-Aqua room cleaning system. Insert the electrical hose cable in the connection
provided (see integral components).
Switch on the Pro-Aqua. Actuate the unlocking mechanism (A) and move the telescopic wand to the
slanted position (B). The motor now starts automatically. The motor switches off if the telescopic
wand is moved back to a vertical position.
Electrical nozzle overload protection
A resetable overload fuse automatically deactivates the motor for its own safety if overloading occurs
as a result of blocking of the brush roller, bulky foreign bodies or knotting of carpet fringes.
The red warning lamp is illuminated as a result. In cases where this occurs, please proceed
as follows:
• Switch off the electrical nozzle and pull the mains plug of the Pro-Aqua room cleaning system
out of the socket.
• Remedy the cause of the error, clean the brush roller if necessary.
• Press the reset button (red) on the rear of the suction nozzle.
You can then restart the appliance.
WARNING
Dry vacuuming only!
CARE OF ELECTRICAL NOZZLE
1. Pull the nozzle mains plug out.
2. Remove any deposits of hair and carpet
fi bres with the crevice nozzle.
TECHNICAL DATA
DATA
Voltage:
Power output:
Patent number
230 V – 50 Hz
150 Watt
INTEGRAL COMPONENTS
COMPONENTS
1. Electrical nozzle (only suitable for dry vacuuming)
2. Telescopic wand for electrical nozzle, stainless steel
3. Pro-Aqua electrical hose (two colours),
only suitable for dry vacuuming
BASIC FUNCTIONS
FUNCTIONS
Use of electrical nozzle
Young Family
equipment variant
The Pro-Aqua electrical nozzle is particularly suitable for cleaning heavily-used rugs and carpets, but
also upholstery and mattresses.
The Pro-Aqua electrical nozzle can also be used for vacuuming hard fl oors.
Switch off your Pro-Aqua room cleaning system. Insert the electrical hose cable in the connection
provided (see integral components).
Switch on the Pro-Aqua. Actuate the unlocking mechanism (A) and move the telescopic wand to the
slanted position (B). The motor now starts automatically. The motor switches off if the telescopic
wand is moved back to a vertical position.
Electrical nozzle overload protection
The motor no longer runs at top speed if overloading of the motor occurs as a result of blocking of
the brush roller, bulky foreign bodies or knotting of carpet fringes.
In cases where this occurs, please proceed as follows:
• Switch off the electrical nozzle and pull the mains plug of the Pro-Aqua room cleaning system
out of the socket.
• Remedy the cause of the error, clean the brush roller if necessary.
• You can then restart the appliance.
CARE
CARE OF ELECTRICAL NOZZLE
1. Pull the nozzle mains plug out.
2. Remove any deposits of hair and carpet
fi bres with the crevice nozzle.
Environmental protection instructions:
Patent number
TECHNICAL DATA
DATA
Voltage:
Power output:
WARNING
Dry vacuuming only!
230 V – 50 Hz
130 Watt
This product should not be disposed of in normal household waste at the end of its service life. It should be taken to a collection
point for recycling electrical and electronic appliances. Materials can be recycled in accordance with their markings.
You are making an important contribution to environmental protection through reuse, material recycling or other forms of
recycling of old appliances. Please ask the local authorities for information on your nearest disposal site.