eneflow 1000

EA Magnetics, Inc. (EAM)
An ENECON Subsidiary
EAM is a full scale magnet design and manufacturing company.
We have the ability to develop, prototype and produce
magnets and magnetic products for almost any application –
whether simple or very complex.

Mineral Scale
Build-up of minerals on the inner walls
of pipes and other equipment.
Result of high quantities of dissolved
diamagnetic earth-salts in hard water -
primarily Calcium and Magnesium

Causes very costly problems in all types
of fluid flow environments…
Piping Systems
Cooling Towers
Heat Exchangers
Boilers
Water Wells
Oil/Fuel Lines
Irrigation Systems
HVAC/R Systems
Swimming Pools/Spas
Water Heaters
Car Washes
Laundries
Mineral Scale

“Traditional” Water Softening
Ion Exchange System
Replaces Calcium and
Magnesium ions with
Sodium
Expensive to Maintain
Salt Disposal Issues lead to
Environmental Concerns

ENEFLOW ®
NON-CHEMICAL…
EVIRONMENTALLY SENSIBLE…
COST-EFFECTIVE…
Solution to scale control issues through
applied magnetic technology.

ENEFLOW ®
The only magnetic fluid treatment system offered by a
magnet design and manufacturing company
Decades of experience in the magnet
manufacturing industry allowed ENECON to
create the most effective permanent magnetic
fluid treatment system available in the global
marketplace.

Features of the ENEFLOW System
Unique, Multi-Pole…
Multi-Axial…
Patented Design
Uniquely concentrates the magnetic
forces for maximum de-scaling effect.

ENEFLOW 1000
For pipe diameters up to 1.5 inches
Ideal for both residential and smaller commercial applications

ENEFLOW 5000
For pipe diameters 2 inches or greater
Designed for larger commercial and
industrial applications.

Amazing results…
A critical heat exchanger at a
tire company was scaling
badly…
Thirty days after installation the “miraculous” results
speak for themselves…

Amazing results…
Valves in the cooling water
system at a chemical
company were covered in
rock-hard scale.
The ENEFLOW system
eliminates the problem
completely…

Amazing results…
A power plant struggled to deal
with scaling in its ash slurry
piping system…
4 Pairs of ENEFLOW 5000’s
were installed on the mail
slurry lines, and 60 days
later the results were
astounding…

Additional Applications
Improve Bactericidal Function of
Disinfectants like Chlorine
Accelerate the Diffusion of Many
Types of Reagents
Improve the Efficiency of Ion-
Exchange Systems (make existing
water softeners more effective)

In fuel applications, ENEFLOW
Power Cells affect the
suspended carbon and other
diamagnetic impurities in the
fuel. They prevent large
macromolecules of these
impurities from forming, thereby
enhancing complete
combustion.
Additional Applications
ENEFLOW Power Cells have
been shown to improve fuel
efficiency and reduce harmful
emissions on many different
types of vehicles and diesel
powered equipment.

Application Guidelines
Factors affecting ENEFLOW Installations:
FLUID VELOCITY
TEMPERATURE
CHEMICAL COMPOSITION
FLUID DE-POLARIZATION
at least 1 meter per second
no more than 150° C
Iron and Manganese content
150 meter effectiveness
FLUID TURBULENCE
EXTERNAL MAGNETIC FIELDS
BRASS MATERIALS in PIPING SYSTEM

ENEFLOW ® Fluid Dynamic
Power Cells
Maintenance Free
Environmentally Safe
Require No Power Source
External Installation
Guaranteed Not to Lose Power
for 10 Years