L-850D/E Style 2 F-Range Series FAA Runway Threshold ...
L-850D/E Style 2 F-Range Series FAA Runway Threshold ...
L-850D/E Style 2 F-Range Series FAA Runway Threshold ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
F-<strong>Range</strong> Type L-<strong>850D</strong>/E <strong>Style</strong> 2 Inset Lights Repair<br />
6. Replacing L-823 Cordset<br />
(cont’d.)<br />
6. Bring the new cable assembly (F9) through the wire clamp (F6).<br />
7. Put a new wire grommet (F5) on each of the wires, taking care of the<br />
direction. Put the smaller diameter into the inner cover recesses.<br />
8. Install the wires in the inner cover.<br />
9. Reinstall the wire clamp (F6) by means of both cross recessed<br />
countersunk screws (F7).<br />
NOTE: Do not torque down the screws entirely at this step.<br />
10. Remove the insulation of the wires over about 5 mm.<br />
11. Crimp on the new female cordset terminals and connect them to the<br />
terminals. Adjust the wires inside the inner cover.<br />
12. Torque the screws (F7) to 31 ± 4 inch-pounds (3.5 ± 0.5 Nt-m).<br />
© 2009 ADB Airfield Solutions, LLC. 96A0308E Page 6-13<br />
All rights reserved Issued 4/03