Dell iDRAC Card Profile - Dell Community

1 

iDRAC Card Profile 

2 

3 

4 

5 

6 

7 

8 

9 

10 

11 

12 

13 

14 

15 

16 

17 

18 

19 

20 

21 

22 

23 

24 

25 

26 

27 

Document Number: DCIM1043 

Document Type: Specification 

Document Status: Published 

Document Language: E 

Date: 2012-12-30 

Version: 1.3.0 

28 

29 

30 

31

32 

33 

34 

35 

36 

37 

38 

39 

40 

41 

42 

43 

44 

45 

46 

47 

48 

49 

50 

51 

52 

53 

54 

55 

56 

THIS PROFILE IS FOR INFORMATIONAL PURPOSES ONLY, AND MAY CONTAIN TYPOGRAPHICAL 

ERRORS AND TECHNICAL INACCURACIES. THE CONTENT IS PROVIDED AS IS, WITHOUT 

EXPRESS OR IMPLIED WARRANTIES OF ANY KIND. ABSENT A SEPARATE AGREEMENT 

BETWEEN YOU AND DELL WITH REGARD TO FEEDBACK TO DELL ON THIS PROFILE 

SPECIFICATION, YOU AGREE ANY FEEDBACK YOU PROVIDE TO DELL REGARDING THIS 

PROFILE SPECIFICATION WILL BE OWNED AND CAN BE FREELY USED BY DELL. 

57 

58 

59 

© 2008 – 2012 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the express 

written permission of Dell, Inc. is strictly forbidden. For more information, contact Dell. 

60 

61 

62 

63 

64 

Dell and the DELL logo are trademarks of Dell Inc. Microsoft and WinRM are either trademarks or 

registered trademarks of Microsoft Corporation in the United States and/or other countries. Other 

trademarks and trade names may be used in this document to refer to either the entities claiming the 

marks and names or their products. Dell disclaims proprietary interest in the marks and names of others. 

65 

66 

2 Version 1.3.0

67 

68 

69 

70 

71 

72 

73 

74 

75 

76 

77 

78 

79 

80 

81 

82 

83 

84 

85 

86 

87 

88 

89 

90 

91 

92 

93 

94 

95 

96 

97 

98 

99 

100 

101 

102 

103 

104 

105 

106 

107 

108 

109 

110 

111 

CONTENTS 

1 Scope .................................................................................................................................................... 7 

2 Normative References ........................................................................................................................... 7 

3 Terms and Definitions ........................................................................................................................... 8 

3.1 8 

3.2 8 

3.3 8 

3.4 8 

3.5 8 

3.6 8 

3.7 8 

3.8 8 

3.9 8 

3.10 8 

3.11 8 

3.12 8 

3.13 9 

3.14 9 

3.15 9 

3.16 9 

4 Symbols and Abbreviated Terms .......................................................................................................... 9 

5 Synopsis .............................................................................................................................................. 10 

6 Description .......................................................................................................................................... 11 

7 Implementation Description ................................................................................................................. 12 

7.1 DCIM_iDRACCardView - iDrac View ........................................................................................ 12 

7.2 DCIM_iDRACCardEnumeration ............................................................................................... 13 

7.3 DCIM_iDRACCardString........................................................................................................... 16 

7.4 DCIM_iDRACCardInteger ......................................................................................................... 17 

7.5 iDRAC Attributes ....................................................................................................................... 19 

7.6 DCIM_iDRACCardService – iDRAC CardService .................................................................... 52 

7.7 iDRAC Card Profile Profile Registration ................................................................................... 53 

8 Methods ............................................................................................................................................... 54 

8.1 DCIM_iDRACCardService.SetAttribute( ) ................................................................................. 54 

8.2 DCIM_iDRACCardService.SetAttributes( ) ............................................................................... 57 

8.3 DCIM_iDRACCardService.CreateTargetedConfigJob( ) .......................................................... 61 

8.4 DCIM_iDRACCardService.DeletePendingConfiguration( )....................................................... 64 

8.5 DCIM_iDRACCardService.ApplyAttributes() ............................................................................ 68 

8.6 DCIM_iDRACCardService.SendTestEmailAlert( ).................................................................... 70 

8.7 DCIM_iDRACCardService.SendTestSNMPTrap() ................................................................... 72 

9 Use Cases ........................................................................................................................................... 75 

10 CIM Elements ...................................................................................................................................... 75 

11 Privilege and License Requirement .................................................................................................... 75 

ANNEX A (Informative) Privilege Information ............................................................................................ 83 

ANNEX B (informative) Change Log ......................................................................................................... 84 

Version 1.3.0 3

112 

113 

114 

115 

116 

117 

118 

119 

120 

121 

122 

123 

124 

125 

126 

127 

128 

129 

130 

131 

132 

133 

134 

135 

136 

137 

138 

139 

140 

141 

142 

143 

144 

145 

146 

147 

148 

149 

150 

151 

152 

153 

154 

155 

156 

157 

Figures 

Figure 1 – iDRAC Card Profile Implementation .......................................................................................... 11 

Tables 

Table 1 – Related Profiles ........................................................................................................................... 10 

Table 2 – Class Requirements: iDRAC Card Profile .................................................................................. 12 

Table 3 – DCIM_iDRACCardView - Operations ......................................................................................... 13 

Table 4 – DCIM_iDRACCardView - Properties........................................................................................... 13 

Table 5 – DCIM_iDRACCardEnumeration - Operations ............................................................................. 14 

Table 6 – Class: DCIM_iDRACCardEnumeration....................................................................................... 15 

Table 7 – DCIM_iDRACCardString - Operations ........................................................................................ 16 

Table 8 – Class: DCIM_iDRACCardString .................................................................................................. 17 

Table 9 – DCIM_iDRACCardInteger - Operations ...................................................................................... 18 

Table 10 – Class: DCIM_iDRACCardInteger .............................................................................................. 19 

Table 11 – DCIM_iDRACCardEnumeration Active Directory ..................................................................... 20 

Table 12 – DCIM_iDRACCardString Active Directory ................................................................................ 20 

Table 13 – DCIM_iDRACCardInteger Active Directory .............................................................................. 21 

Table 14 – DCIM_iDRACCardString AD Group Configuration ................................................................... 21 

Table 15 – DCIM_iDRACCardInteger AD Group Configuration ................................................................. 21 

Table 16 – DCIM_iDRACCardEnumeration RAC Email Alert .................................................................... 22 

Table 17 – DCIM_iDRACCardString RAC Email Alert ............................................................................... 22 

Table 18 – DCIM_iDRACCardString RAC Information ............................................................................... 23 

Table 19 – DCIM_iDRACCardEnumeration RAC Information .................................................................... 23 

Table 20 – DCIM_iDRACCardEnumeration IP Blocking ............................................................................ 24 

Table 21 – DCIM_iDRACCardString IP Blocking........................................................................................ 24 

Table 22 – DCIM_iDRACCardInteger IP Blocking ...................................................................................... 24 

Table 23 – DCIM_iDRACCardEnumeration IPMI Lan ................................................................................ 25 

Table 24 – DCIM_iDRACCardString IPMI Lan ........................................................................................... 25 

Table 25 – DCIM_iDRACCardEnumeration IPMI Serial ............................................................................. 25 

Table 26 – DCIM_iDRACCardEnumeration IPMI Serial-over-LAN ............................................................ 26 

Table 27 – DCIM_iDRACCardInteger IPMI Serial-over-LAN ...................................................................... 26 

Table 28 – DCIM_iDRACCardEnumeration IPv4 Information .................................................................... 27 

Table 29 – DCIM_iDRACCardString IPv4 Information ............................................................................... 27 

Table 30 – DCIM_iDRACCardEnumeration IPv6 Information .................................................................... 28 

Table 31 – DCIM_iDRACCardString IPv6 Information ............................................................................... 28 

Table 32 – DCIM_iDRACCardInteger IPv6 Information ............................................................................. 29 

Table 33 – DCIM_iDRACCardEnumeration LDAP ..................................................................................... 30 

Table 34 – DCIM_iDRACCardString LDAP ................................................................................................ 30 

Table 35 – DCIM_iDRACCardInteger LDAP .............................................................................................. 31 

Table 36 – DCIM_iDRACCardString LDAP Group ..................................................................................... 31 

Table 37 – DCIM_iDRACCardInteger LDAP Group ................................................................................... 32 

Table 38 – DCIM_iDRACCardEnumeration Local Security ........................................................................ 32 

Table 39 – DCIM_iDRACCardEnumeration NIC Information ..................................................................... 33 

Table 40 – DCIM_iDRACCardString NIC Information ................................................................................ 33 

Table 41 – DCIM_iDRACCardInteger NIC Information .............................................................................. 34 

Table 42 – DCIM_iDRACCardEnumeration OS-BMC Passthru Configuration .......................................... 34 

4 Version 1.3.0

158 

159 

160 

161 

162 

163 

164 

165 

166 

167 

168 

169 

170 

171 

172 

173 

174 

175 

176 

177 

178 

179 

180 

181 

182 

183 

184 

185 

186 

187 

188 

189 

190 

191 

192 

193 

194 

195 

196 

197 

198 

199 

200 

201 

202 

203 

204 

205 

206 

Table 43 – DCIM_iDRACCardString OS-BMC Passthru Configuration ..................................................... 34 

Table 44 – DCIM_iDRACCardEnumeration Remote Racadm Configuration ............................................. 35 

Table 45 – DCIM_iDRACCardInteger Remote Racadm Configuration ...................................................... 35 

Table 46 – DCIM_iDRACCardString RAC Remote Hosts .......................................................................... 35 

Table 47 – DCIM_iDRACCardEnumeration RAC Certificate ...................................................................... 36 

Table 48 – DCIM_iDRACCardString RAC Certificate ................................................................................. 36 

Table 49 – DCIM_iDRACCardEnumeration Serial Configuration ............................................................... 37 

Table 50 – DCIM_iDRACCardString Serial Configuration .......................................................................... 37 

Table 51 – DCIM_iDRACCardInteger Serial Configuration ........................................................................ 37 

Table 52 – DCIM_iDRACCardEnumeration RAC Serial Redirection ......................................................... 38 

Table 53 – DCIM_iDRACCardString RAC Serial Redirection .................................................................... 38 

Table 54 – DCIM_iDRACCardEnumeration Smart Card Configuration ..................................................... 38 

Table 55 – DCIM_iDRACCardEnumeration SNMP Configuration.............................................................. 39 

Table 56 – DCIM_iDRACCardString SNMP Configuration ......................................................................... 39 

Table 57 – DCIM_iDRACCardEnumeration SNMP Alert Destination ........................................................ 39 

Table 58 – DCIM_iDRACCardString SNMP Alert Destination .................................................................... 40 

Table 59 – DCIM_iDRACCardEnumeration RAC SSH .............................................................................. 40 

Table 60 – DCIM_iDRACCardInteger RAC SSH ........................................................................................ 41 

Table 61 – DCIM_iDRACCardEnumeration Telnet Configuration .............................................................. 41 

Table 62 – DCIM_iDRACCardInteger Telnet Configuration ....................................................................... 41 

Table 63 – DCIM_iDRACCardEnumeration Sys Log ................................................................................. 42 

Table 64 – DCIM_iDRACCardString Sys Log ............................................................................................. 42 

Table 65 – DCIM_iDRACCardInteger Sys Log ........................................................................................... 42 

Table 66 – DCIM_iDRACCardEnumeration Update ................................................................................... 43 

Table 67 – DCIM_iDRACCardString Update .............................................................................................. 43 

Table 68 – DCIM_iDRACCardString User Domain .................................................................................... 43 

Table 69 – DCIM_iDRACCardEnumeration Users ..................................................................................... 44 

Table 70 – DCIM_iDRACCardString iDRAC Users .................................................................................... 44 

Table 71 – DCIM_iDRACCardInteger iDRAC Users .................................................................................. 45 

Table 72 – DCIM_iDRACCardEnumeration Virtual Console Configuration ............................................... 45 

Table 73 – DCIM_iDRACCardInteger Virtual Console Configuration ......................................................... 46 

Table 74 – DCIM_iDRACCardEnumeration Virtual Media Configuration ................................................... 46 

Table 75 – DCIM_iDRACCardEnumeration Web Server ........................................................................... 47 

Table 76 – DCIM_iDRACCardInteger Web Server ..................................................................................... 47 

Table 77 – DCIM_iDRACCardInteger Time Zone Configuration Information ............................................. 47 

Table 78 – DCIM_iDRACCardString Time Zone Configuration Information ............................................... 47 

Table 79 – DCIM_iDRACCardString NTP Configuration ............................................................................ 48 

Table 80 – DCIM_iDRACCardEnumeration NTP Configuration ................................................................. 48 

Table 82 – DCIM_iDRACCardInteger NTP Configuration .......................................................................... 48 

Table 81 – DCIM_iDRACCardEnumeration Remote File Share ................................................................ 49 

Table 82 – DCIM_iDRACCardString NIC Static Information ...................................................................... 49 

Table 83 – DCIM_iDRACCardString IPv4 Static Information ..................................................................... 50 

Table 84 – DCIM_iDRACCardString IPv6 Static Information ..................................................................... 50 

Table 85 – DCIM_iDRACCardInteger IPv6 Static Information ................................................................... 50 

Table 86 – DCIM_iDRACCardEnumeration Default Credential Mitigation Configuration .......................... 51 

Table 87 – DCIM_iDRACCardString IPv6 URL Information ....................................................................... 51 

Table 80 – DCIM_iDRACCardEnumeration iDRAC Logging ...................................................................... 52 

Table 88 – DCIM_IDRACCardSerice - Operations .................................................................................... 52 

Table 89 – DCIM_IDRACCardServcie - Properties ................................................................................... 52 

Version 1.3.0 5

207 

208 

209 

210 

211 

212 

213 

214 

215 

216 

217 

218 

219 

220 

221 

222 

223 

224 

225 

226 

227 

228 

229 

230 

231 

Table 90 – DCIM_LCRegisteredProfile - Operations ................................................................................. 53 

Table 91 – DCIM_LCRegisteredProfile - Properties .................................................................................. 53 

Table 92 – SetAttribute( ) Method: Return Code Values ............................................................................. 54 

Table 93 – SetAttribute( ) Method: Parameters ........................................................................................... 54 

Table 94 – SetAttribute( ) Method: Standard Messages ............................................................................. 55 

Table 95 – SetAttributes( ) Method: Return Code Values ........................................................................... 58 

Table 96 – SetAttributes( ) Method: Parameters ......................................................................................... 58 

Table 97 – SetAttributes( ) Method: Standard Messages ........................................................................... 58 

Table 98 – CreateTargetedConfigJob( ) Method: Return Code Values ...................................................... 61 

Table 99 – CreateTargetedConfigJob( ) Method: Parameters .................................................................... 61 

Table 100 – CreateTargetedConfigJob( ) Method: Standard Messages .................................................... 62 

Table 101 – DeletePendingConfiguration( ) Method: Return Code Values ................................................ 64 

Table 102 – DeletePendingConfiguration( ) Method: Parameters .............................................................. 65 

Table 103 – DeletePendingConfiguration( ) Method: Standard Messages ................................................. 65 

Table 104 – ApplyAttributes() Method: Return Code Values ...................................................................... 68 

Table 105 – ApplyAttributes() Method: Parameters .................................................................................... 68 

Table 106 – ApplyAttributes( ) Method: Standard Messages ...................................................................... 68 

Table 107 – SendTestEmailAlert( ) Method: Return Code Values .............................................................. 70 

Table 108 – SendTestEmailAlert ( ) Method: Parameters .......................................................................... 70 

Table 109 – SendTestEmailAlert ( ) Method: Standard Messages ............................................................ 70 

Table 110 – SendTestSNMPTrap( ) Method: Return Code Values ............................................................ 73 

Table 111 – SendTestSNMPTrap( ) Method: Parameters .......................................................................... 73 

Table 112 – SendTestSNMPTrap() Method: Standard Messages ............................................................. 73 

Table 113 – Privilege and License Requirements ...................................................................................... 75 

Table 114 – Privilege Bit Mask ................................................................................................................... 83 

232 

6 Version 1.3.0

233 

iDRAC Card Profile 

234 

235 

236 

237 

238 

239 

1 Scope 

The DCIM iDRAC Card Profile describes the properties and interfaces for executing system management 

tasks related to the management of basic properties of iDRAC card. The profile standardizes and 

aggregates the description for the remote access card properties into a iDRAC view and iDRAC attribute 

representation, and provides static methodology for the clients to query the iDRAC views and set the 

iDRAC attributes without substantial traversal of the model. 

240 

241 

242 

243 

244 

245 

246 

247 

248 

249 

250 

251 

2 Normative References 

Refer to the following documents for more information. 

NOTE: For dated references, only the edition cited applies. For undated references, the latest edition of 

the referenced document (including any amendments) applies. 

DMTF DSP1033, Profile Registration Profile 1.0.0 

DMTF DSP0226, Web Services for Management (WS-Management) Specification 1.1.0 

DMTF DSP0227, WS-Management CIM Binding Specification 1.0.0 

Dell Lifecycle Controller Best Practices Guide v1.0, 

Intelligent Platform Management Interface Specification v2.0, 

http://download.intel.com/design/servers/ipmi/IPMIv2_0rev1_0.pdf 

Dell Tech Center MOF Library: 

252 

253 

254 

255 

256 

257 

258 

259 

260 

261 

262 

 

o http://www.delltechcenter.com/page/DCIM.Library.MOF 

Related Managed Object Format (MOF) files: 

o DCIM_iDRACCardView.mof 

o DCIM_iDRACCardAttribute.mof 

o DCIM_iDRACCardInteger.mof 

o DCIM_iDRACCardService.mof 

o DCIM_iDRACCardEnumeration.mof 

o DCIM_iDRACCardString.mof 

o DCIM_LCElementConformsToProfile.mof 

o DCIM_LCRegisteredProfile.mof 

Version 1.3.0 7

263 

264 

265 

266 

267 

268 

269 

270 

271 

272 

273 

274 

275 

276 

277 

278 

279 

280 

281 

282 

283 

284 

285 

286 

287 

288 

289 

290 

291 

292 

293 

294 

3 Terms and Definitions 

For the purposes of this document, the following terms and definitions apply. 

3.1 

can - Used for statements of possibility and capability, whether material, physical, or causal. 

3.2 

cannot - Used for statements of possibility and capability, whether material, physical, or causal. 

3.3 

conditional - Indicates requirements to be followed strictly in order to conform to the document when the 

specified conditions are met. 

3.4 

mandatory - Indicates requirements to be followed strictly in order to conform to the document and from 

which no deviation is permitted. 

3.5 

may - Indicates a course of action permissible within the limits of the document. 

3.6 

need not - Indicates a course of action permissible within the limits of the document. 

3.7 

optional - Indicates a course of action permissible within the limits of the document. 

3.8 

referencing profile - Indicates a profile that owns the definition of this class and can include a reference 

to this profile in its “Related Profiles” table. 

3.9 

shall - Indicates requirements to be followed strictly in order to conform to the document and from which 

no deviation is permitted 

3.10 

shall not – Indicates requirements to be followed strictly in order to conform to the document and from 

which no deviation is permitted. 

3.11 

should – Indicates that among several possibilities, one is recommended as particularly suitable, without 

mentioning or excluding others, or that a certain course of action is preferred but not necessarily required. 

3.12 

should not – Indicates that a certain possibility or course of action is deprecated but not prohibited. 

8 Version 1.3.0

295 

296 

297 

298 

299 

300 

301 

302 

303 

304 

305 

306 

307 

308 

3.13 

Interop Namespace: root/interop 

Interop Namespace: root/interop is where instrumentation instantiates classes to advertise its capabilities 

for client discovery. 

3.14 

Implementation Namespace: root/dcim 

Implementation Namespace: root/dcim is where instrumentation instantiates classes relevant to executing 

core management tasks. 

3.15 

ENUMERATE - Refers to WS-MAN ENUMERATE operation as described in Section 8.2 of 

DSP0226_V1.1 and Section 9.1 of DSP0227_V1.0 

3.16 

GET - Refers to WS-MAN GET operation as defined in Section 7.3 of DSP00226_V1.1 and Section 

7.1 of DSP0227_V1.0 

309 

310 

311 

312 

313 

314 

315 

316 

317 

318 

319 

320 

321 

322 

323 

324 

325 

4 Symbols and Abbreviated Terms 

4.1 

CIM - Common Information Model 

4.2 

iDRAC - Integrated Dell Remote Access Controller – management controller for blades and monolithic 

servers 

4.3 

CMC - Chassis Manager Controller – management controller for the modular chassis 

4.4 

WBEM - Web-Based Enterprise Management 

4.5 

SSO - Single Sign On 

4.6 

CSR - Certificate Signing Request 

Version 1.3.0 9

326 

327 

328 

329 

330 

331 

332 

333 

334 

335 

336 

337 

338 

339 

340 

5 Synopsis 

Profile Name: iDRAC Card 

Version: 1.3.0 

Organization: Dell 

CIM Schema Version: 2.26 Experimental 

Dell Schema Version: 1.0.0 

Interop Namespace: root/interop 

Implementation Namespace: root/dcim 

Central Class: DCIM_iDRACCardView 

Scoping Class: DCIM_ComputerSystem 

The Dell iDRAC Card Profile is a component profile that contains the Dell specific implementation 

requirements for remote access card view. 

DCIM_iDRACCardView shall be the Central Class. 

Table 1 identifies profiles that are related to this profile. 

Table 1 – Related Profiles 

Profile Name Organization Version Relationship 

Profile Registration Profile DCIM 1.0 Mandatory 

Dell Job Control DCIM 1.0 Mandatory 

10 Version 1.3.0

341 

342 

343 

344 

345 

346 

347 

348 

6 Description 

The Dell iDRAC Card Profile describes the platform’s iDRAC remote access card. Each remote access 

card’s information is represented by an instance of DCIM_iDRACCardView class. 

Figure 1 details typical Dell iDRAC Card Profile implementation for a platform with iDRAC remote access 

card. For the client to discover the instrumentation’s support of this profile, iDracProfile is instantiated in 

the Interop Namespace:root/dcim. 

The DCIM_LCRegisteredProfile instance describes the information about the implemented profile-most 

importantly, the name and version of the profile and the organization name that produced the profile. 

349 

DCIM_LCRegisteredProfile 

Interop 

Namespace 

Implementation 

Namespace 

DCIM_LCElementConformsToProfile 

DCIM_iDRACCardService 

DCIM_iDRACCardView 

CIM_BIOSAttribute 

DCIM_iDRACCardAttribute 

DCIM_iDRACCardEnumeration 

DCIM_iDRACCardInteger 

DCIM_iDRACCardString 

350 

351 

Figure 1 – iDRAC Card Profile Implementation 

Version 1.3.0 11

352 

353 

354 

7 Implementation Description 

This section describes the requirements and guidelines for implementing Dell iDRAC Card Profile. 

Table 2 – Class Requirements: iDRAC Card Profile 

Element Name Requirement Description 

Classes 

DCIM_iDRACCardView Mandatory The class shall be implemented in the 

Implementation Namespace: root/dcim. 

See section 7.1. 

DCIM_iDRACCardEnumeration Mandatory The class shall be implemented in the 


See section 7.2 and 7.5. 

DCIM_iDRACCardString Mandatory The class shall be implemented in the 

Implementation Namespace: root/dcim . 


DCIM_iDRACCardInteger Mandatory The class shall be implemented in the 



DCIM_iDRACCardService Mandatory The class shall be implemented in the 



DCIM_LCElementConformsToProfile Mandatory The class shall be implemented in the 


DCIM_LCElementConformsToProfile Mandatory The class shall be implemented in the 

Interop Namespace: root/interop. 

DCIM_LCRegisteredProfile Mandatory The class shall be implemented in the 

Interop Namespace: root/interop. 


Indications 

None defined in this profile 

355 

356 

357 

358 

359 

360 

361 

362 

363 

364 

365 

366 

367 

7.1 DCIM_iDRACCardView - iDrac View 

This section describes the implementation for the DCIM_iDRACCardView class. 

This class shall be instantiated in the Implementation Namespace: root/dcim. 

The DCIM_LCElementConformsToProfile association(s) shall reference the DCIM_iDRACCardView 

instance(s). 

7.1.1 Resource URIs for WinRM ® 

The class Resource URI shall be “http://schemas.dell.com/wbem/wscim/1/cimschema/2/DCIM_iDRACCardView?__cimnamespace=root/dcim” 

The key property shall be the InstanceID. 

The instance Resource URI for DCIM_iDRACCardView instance shall be: 

“http://schemas.dell.com/wbem/wscim/1/cimschema/2/DCIM_iDRACCardView?__cimnamespace=root/dcim+InstanceID=” 

12 Version 1.3.0

368 

369 

370 

7.1.2 Operations 

The following table lists the implemented operations on DCIM_iDRACCardView. 

Table 3 – DCIM_iDRACCardView - Operations 

Operation Name Requirements Required Input 

Get Mandatory Instance URI 

Enumerate Mandatory Class URI 

371 

372 

373 

374 

375 

376 

377 

378 

379 

7.1.3 Class Properties 

The following table details the implemented properties for DCIM_iDRACCardView instance representing 

a remote access card in a system. The “Requirements” column shall denote whether the property is 

implemented (for requirement definitions, see section 3). The “Additional Requirements” column shall 

denote either possible values for the property, or requirements on the value formulation. 

Table 4 – DCIM_iDRACCardView - Properties 

Property Name Requirements Type Requirement and description 

InstanceID Mandatory string 

The property value shall be unique key 

value. 

FQDD Mandatory string 

A string containing the Fully Qualified 

Device Description, a user-friendly 

name for the object. 

IPMIVersion Mandatory string A string containing the IPMI Version. 

GUID Mandatory string A string containing the GUID for iDRAC. 

LANEnabledState Mandatory uint16 LAN enabled state. 

SOLEnabledState Mandatory uint16 SOL enabled state 

PermanentMACAddress Mandatory string 

A string containing the permanent MAC 

address. 

FirmwareVersion Mandatory string 

A string containing the iDRAC firmware 

Version. 

Model Mandatory string A string containing the iDRAC model. 

ProductDescription Mandatory string 

A string containing the iDRAC’s purpose 

and short description. 

URLString Mandatory string 

A string containing the URL for the 

iDRAC Web GUI. 

DNSRacName Mandatory string 

A string containing the host name for 

the iDRAC. 

DNSDomainName Mandatory string 

A string containing the domain name for 

the iDRAC. 

LastSystemInventoryTime Mandatory string 

This property provides the last time 

\"System \"Inventory Collection On 

Reboot(CSIOR)\" was performed. The 

value is represented as 

yyyymmddHHMMSS. 

LastUpdateTime Mandatory string 

This property provides the last time the 

data was updated. The value is 

represented as yyyymmddHHMMSS 

7.2 DCIM_iDRACCardEnumeration 

This section describes the implementation for the DCIM_iDRACCardEnumeration class. 

Version 1.3.0 13

380 

381 

382 

383 

384 

385 

386 

387 

388 

389 

390 

391 

392 

393 

394 

395 

396 

397 

398 

399 

Each DCIM_iDRACCardEnumeration instance is logically associated to a DCIM_iDRACCardView 

instance, where the DCIM_iDRACCardEnumeration. FQDD property is equal to the FQDD property on 

the DCIM_iDRACCardView instance. 




The class Resource URI shall be “http://schemas.dell.com/wbem/wscim/1/cimschema/2/DCIM_iDRACCardEnumeration?__cimnamespace=root/dcim” 

The instance Resource URI for DCIM_iDRACCardEnumeration instance shall be: 

“http://schemas.dell.com/wbem/wscim/1/cimschema/2/DCIM_iDRACCardEnumeration?__cimnamespace=root/dcim+InstanceID= 

##” 


The following table lists the implemented operations on DCIM_iDRACCardEnumeration. 

Table 5 – DCIM_iDRACCardEnumeration - Operations 




DCIM_iDRACCardService.SetAttributte() Mandatory See section 8.1 

DCIM_iDRACCardService.SetAttributes() Mandatory See section 8.2 


The following table details the implemented properties for DCIM_iDRACCardEnumeration instance 

representing a iDRAC Card enumeration attribute. The “Requirements” column shall denote whether the 

property is implemented (for requirement definitions, see section 3). The “Additional Requirements” 

column shall denote either possible values for the property, or requirements on the value formulation. 

14 Version 1.3.0

400 

Table 6 – Class: DCIM_iDRACCardEnumeration 

Properties Type Notes Additional Requirements 

InstanceID String Mandatory The property value shall be formed as follows: 

“##”. 

AttributeName String Mandatory The property value shall be from the 

“AttributeName” column in Tables in section 7.5. 

AttributeDisplayName String Mandatory The property value shall be from the 

“AttributeDisplayName” column in Tables in 

section 7.5. 

GroupID String Mandatory See section 7.5. 

GroupDisplayName String Mandatory See section 7.5. 

CurrentValue[] String Mandatory The property value shall be one of the values in 

the “PossibleValues” column at the corresponding 

row in Tables in section 7.5. 

PendingValue[] String Mandatory The property value shall be one of the values in 



DefaultValue[] String Mandatory The property value shall represent the default 

value of the attribute. 

IsReadOnly Boolean Mandatory The property value shall be from the 

“IsReadOnly” column in Tables in section 7.5. 

FQDD String Mandatory FQDD of the iDRAC that the attribute belongs to. 

DisplayOrder uint16 Mandatory The property shall represent the sequence 

number denoting the preferred placement of the 

attribute in the list of all iDRAC attributes. 

Dependency String Optional The property shall be NULL. 

PossibleValues[] String Mandatory The property value shall be equal to the array of 

the values in “PossibleValues” column at the 

corresponding row in in Tables in section 7.5. 

401 

402 

Version 1.3.0 15

403 

404 

405 

406 

407 

408 

409 

410 

411 

412 

413 

414 

415 

416 

417 

418 

419 

7.3 DCIM_iDRACCardString 

This section describes the implementation for the DCIM_iDRACCardString class. 

Each DCIM_iDRACCardString instance is logically associated to a DCIM_iDRACCardView instance, 

where the DCIM_iDRACCardString. FQDD property is equal to the FQDD property on the 

DCIM_iDRACCardView instance. 



The class Resource URI shall be “http://schemas.dell.com/wbem/wscim/1/cimschema/2/DCIM_iDRACCardString?__cimnamespace=root/dcim” 


The instance Resource URI for DCIM_iDRACCardString instance shall be: 

“http://schemas.dell.com/wbem/wscim/1/cimschema/2/DCIM_iDRACCardString?__cimnamespace=root/dcim+InstanceID=##” 


The following table lists the implemented operations on DCIM_iDRACCardString. 

Table 7 – DCIM_iDRACCardString - Operations 






420 

421 

422 

423 

424 


The following table details the implemented properties for DCIM_iDRACCardString instance representing 

a iDRAC string attribute. The “Requirements” column shall denote whether the property is implemented 

(for requirement definitions, see section 3). The “Additional Requirements” column shall denote either 

possible values for the property, or requirements on the value formulation. 

16 Version 1.3.0

425 

Table 8 – Class: DCIM_iDRACCardString 

Properties Type Notes Additional Requirements 


“##”. 




“AttributeDisplayName” column in in Tables in 

section 7.5. 



CurrentValue[] String Mandatory The property value shall represent the current 


PendingValue[] String Mandatory The property value shall represent the current 











MinLength uint64 Mandatory The property value shall be the value in the 

“MinLength” column at the corresponding row in in 

Tables in section 7.5. 

The omission or NULL shall denote that no known 

constraint exists on the CurrentValue and 

PendingValue properties. 

MaxLength uint64 Mandatory The property value shall be the value in the 

“MaxLength” column at the corresponding row in 

in Tables in section 7.5 




426 

427 

428 

429 

430 

431 

432 

433 

434 

7.4 DCIM_iDRACCardInteger 

This section describes the implementation for the DCIM_iDRACCardInteger class. 

Each DCIM_iDRACCardInteger instance is logically associated to a DCIM_iDRACCardView instance, 

where the DCIM_iDRACCardInteger.FQDD property is equal to the FQDD property on the 

DCIM_iDRACCardView instance. 



The class Resource URI shall be “http://schemas.dell.com/wbem/wscim/1/cimschema/2/DCIM_iDRACCardInteger?__cimnamespace=root/dcim” 

Version 1.3.0 17

435 

436 

437 

438 

439 

440 

441 

442 


The instance Resource URI for DCIM_iDRACCardInteger instance shall be: 

“http://schemas.dell.com/wbem/wscim/1/cimschema/2/DCIM_iDRACCardInteger?__cimnamespace=root/dcim+InstanceID=##” 


The following table lists the implemented operations on DCIM_iDRACCardInteger. 

Table 9 – DCIM_iDRACCardInteger - Operations 






443 

444 

445 

446 

447 

448 


The following table details the implemented properties for DCIM_iDRACCardInteger instance 

representing a iDRAC integer attribute. The “Requirements” column shall denote whether the property is 

implemented (for requirement definitions, see section 3). The “Additional Requirements” column shall 

denote either possible values for the property, or requirements on the value formulation. 

18 Version 1.3.0

449 

Table 10 – Class: DCIM_iDRACCardInteger 

Properties Type Requirement Additional Requirements 


“##”. 




“AttributeDisplayName” column in Tables in 

section 7.5. 



CurrentValue[] String Mandatory The property value shall be one of the values in 



PendingValue[] String Mandatory The property value shall be one of the values in 












LowerBound uint64 Mandatory The property value shall be the value in the 

“LowerBound” column at the corresponding row in 





UpperBound uint64 Mandatory The property value shall be the value in the 

“UpperBound” column at the corresponding row in 





450 

451 

452 

453 

454 

455 

456 

7.5 iDRAC Attributes 

This section lists and describes the attributes and their logical grouping. 

7.5.1 Active Directory 

This section describes the attributes for iDRAC’s Active Directory Configuration. 

The GroupID property for the DCIM_iDRACCardEnumeration, DCIM_iDRACCardString, and 

DCIM_iDRACCardInteger shall be “ActiveDirectory.1”. 

Version 1.3.0 19

457 

458 

459 

460 

461 

462 

463 

464 

The GroupDisplayName property for the DCIM_iDRACCardEnumeration, DCIM_iDRACCardString, and 

DCIM_iDRACCardInteger shall be “Active Directory”. 

The following table describes the values for the DCIM_iDRACCardEnumeration of this group. Each 

column heading corresponds to a property name on the DCIM_iDRACCardEnumeration class. The 

Description column contains the description for each of the attribute. Each row contains the values for the 

properties listed in the column headings. The PossibleValues property is an array property represented in 

the table as comma delimited list. 

Table 11 – DCIM_iDRACCardEnumeration Active Directory 

AttributeName AttributeDisplayName IsReadOnly Display 

Order 

PossibleValues 

Enable Active Directory Enable FALSE 771 “Disabled”, “Enabled” 

Schema 

CertValidationEnable 

Active Directory Schema 

Type FALSE 775 

“Extended Schema”, “Standard 

Schema” 

Certificate Validation 

Enable FALSE 782 “Disabled”, “Enabled” 

SSOEnable SSO Enable FALSE 1063 “Disabled”, “Enabled” 

DCLookupEnable 

DCLookupByUserDomain 

GCLookupEnable 

Domain Controller 

Lookup Enable FALSE 785 “Disabled”, “Enabled” 

Domain Controller 

Lookup By User Domain FALSE 788 “Disabled”, “Enabled” 

Global Catalog Server 

Lookup Enable 

FALSE 

784 

“Disabled”, “Enabled” 

465 

466 

467 

468 

469 

The following table describes the values for the DCIM_iDRACCardString of this group. Each column 

heading corresponds to a property name on the DCIM_iDRACCardString class. The Value Expression 

column contains constraints on string value formulation. Each row contains the values for the properties 

listed in the column headings. 

Table 12 – DCIM_iDRACCardString Active Directory 

RacName 

RacDomain 

AttributeName 

Attribute 

Description 

IsReadOnly 

Display 

Order 

MinLength 

Active Directory RAC 

Name FALSE 772 0 254 

Active Directory RAC 

Domain FALSE 773 0 254 

MaxLength 

DomainController1 Domain Controller 1 FALSE 776 0 254 



GlobalCatalog1 Global Catalog 1 FALSE 779 0 254 



DCLookupDomainName 

GCRootDomain 

Active Directory 

Lookup Domain 


Active Directory Root 

Domain FALSE 786 0 254 

20 Version 1.3.0

470 

471 

472 

473 

The following table describes the values for the DCIM_iDRACCardInteger of this group. Each column 

heading corresponds to a property name on the DCIM_iDRACCardInteger class. Each row contains the 

values for the properties listed in the column headings. 

Table 13 – DCIM_iDRACCardInteger Active Directory 


Order 

LowerBound 

UpperBound 

AuthTimeout 

Active Directory 

Authentication Timeout FALSE 774 15 300 

474 

475 

476 

477 

478 

479 

480 

481 

482 

483 

484 

7.5.2 Active Directory Group Configuration 

This section describes the attributes for iDRAC’s Active Directory Group Configuration. 


DCIM_iDRACCardInteger shall be “ADGroup.” where “” is a number 1 through 5. 


DCIM_iDRACCardInteger shall be “AD Group Configuration”. 





Table 14 – DCIM_iDRACCardString AD Group Configuration 

AttributeName 

Attribute 

Description 

IsReadOnly 

Display 

Order 

MinLength 

MaxLength 

Name 

AD Role Group 

Name 

FALSE 

801, 

811, 

821, 

831, 

841 0 254 

Domain AD Group Domain FALSE 

802, 

812, 

822, 

832, 

842 0 254 

485 

486 

487 

488 




Table 15 – DCIM_iDRACCardInteger AD Group Configuration 


Order 

LowerBound 

UpperBound 

Version 1.3.0 21


Order 

LowerBound 

UpperBound 

Privilege AD Group Privilege FALSE 

803, 

813, 

823, 

833, 

843, 0 511 

489 

490 

491 

492 

493 

494 

495 

496 

497 

498 

499 

500 

7.5.3 Email Alert 

This section describes the attributes for iDRAC’s Email Alert Configuration. 


DCIM_iDRACCardInteger shall be “EmailAlert.” where is a number 1 through 4. 


DCIM_iDRACCardInteger shall be “RAC Email Alert”. 






Table 16 – DCIM_iDRACCardEnumeration RAC Email Alert 


Order 


Enable Enable Email Alerts FALSE 

471, 491, 

511, 521 “Disabled”, “Enabled” 

501 

502 

503 

504 

505 





Table 17 – DCIM_iDRACCardString RAC Email Alert 

AttributeName 

Attribute 

Description 

IsReadOnly 

Display 

Order 

MinLength 

MaxLength 

Address Email Alert Address FALSE 

472, 

492, 

512, 

522 0 64 

CustomMsg 

Email Alert Custom 

Message 

FALSE 

473, 

493, 

513, 

523 0 32 

22 Version 1.3.0

506 

507 

508 

509 

510 

511 

512 

513 

514 

515 

516 

7.5.4 iDRAC Information 



DCIM_iDRACCardInteger shall be “Info.1”. 


DCIM_iDRACCardInteger shall be “RAC Information”. 





Table 18 – DCIM_iDRACCardString RAC Information 

AttributeName 

Product 

Description 

Version 

Build 

Attribute 

Description 

IsReadOnly 

Display 

Order 

MinLength 

iDRAC Product 

Information TRUE 1 0 63 

iDRAC Description 


iDRAC Version 


iDRAC Build 


MaxLength 

Name iDRAC Name TRUE 5 0 15 

517 

518 

519 

520 

521 

522 






Table 19 – DCIM_iDRACCardEnumeration RAC Information 


Order 

Type iDRAC Type TRUE 6 


“12G Monolithic”, “12G 

Modular” 

523 

524 

525 

526 

527 

528 

529 

530 

531 

532 

533 

7.5.5 IP Blocking 

This section describes the attributes for iDRAC’s IP Blocking Configuration. 


DCIM_iDRACCardInteger shall be “IPBlocking.1”. 


DCIM_iDRACCardInteger shall be “IP Blocking”. 






Version 1.3.0 23

534 

Table 20 – DCIM_iDRACCardEnumeration IP Blocking 


Order 


RangeEnable Tune IP Range Enable FALSE 721 “Disabled”, “Enabled” 

BlockEnable Tune IP Range Enable FALSE 724 “Disabled”, “Enabled” 

535 

536 

537 

538 

539 





Table 21 – DCIM_iDRACCardString IP Blocking 


Order 

MinLength 

MaxLength 

RangeAddr Tune IP Range Address FALSE 722 0 16 

RangeMask Tune IP Range Mask FALSE 723 0 16 

540 

541 

542 

543 




Table 22 – DCIM_iDRACCardInteger IP Blocking 


Order 

FailCount 

FailWindow 1 

PenaltyTime 

Tune IP Block Fail 

Count 

Tune IP Block Fail 

Window 

Tune IP Block Penalty 

Time 

LowerBound 

FALSE 731 2 16 

FALSE 732 10 65535 

FALSE 733 2 65535 

UpperBound 

544 

545 

546 

547 

548 

549 

550 

551 

552 

553 

554 

555 

556 

NOTE: 1 – Defines the time span (in seconds) that the failed attempts are counted. When failure attempts age 

beyond this limit, they are dropped from the count. 

7.5.6 IPMI LAN 

This section describes the attributes for iDRAC’s IPMI LAN Configuration. 


DCIM_iDRACCardInteger shall be “IPMILan.1”. 


DCIM_iDRACCardInteger shall be “IPMI LAN Information”. 






24 Version 1.3.0

557 

Table 23 – DCIM_iDRACCardEnumeration IPMI Lan 

Enable 


Order 

Enable or Disable IPMI 

over LAN 


FALSE 201 “Disabled”, “Enabled” 

PrivLimit Privilege Limit FALSE 202 “Administrator”, “User”, 

“Operator” 

AlertEnable 

Enable or Disable Alerts 

over LAN 

FALSE 205 “Disabled”, “Enabled” 

558 

559 

560 

561 

562 





Table 24 – DCIM_iDRACCardString IPMI Lan 


Order 

EncryptionKey 

CommunityName 

MinLength 

Encryption Key FALSE 203 0 20 

Community Name FALSE 204 0 18 

MaxLength 

563 

564 

565 

566 

567 

568 

569 

570 

571 

572 

573 

574 

7.5.7 IPMI Serial 

This section describes the attributes for iDRAC’s IPMI Serial Configuration. 


DCIM_iDRACCardInteger shall be “IPMISerial.1”. 


DCIM_iDRACCardInteger shall be “RAC IPMI Serial”. 






Table 25 – DCIM_iDRACCardEnumeration IPMI Serial 


Order 

ConnectionMode 


IPMI Serial Connection 

Mode FALSE 621 “Basic”, “Terminal” 

BaudRate IPMI Serial Baud Rate FALSE 622 9600, 19200, 57600, 115200 

FlowControl IPMI Serial Flow Control FALSE 623 “None”,”CTS/RTS” 

ChanPrivLimit 

IPMI Serial Channel 

Privilege Limit FALSE 624 

“Administrator”, “User”, 


LineEdit IPMI Serial Line Edit FALSE 625 “Disabled”, “Enabled” 

DeleteControl 1 

IPMI Serial Delete 

Control FALSE 626 “Disabled”, “Enabled” 

Version 1.3.0 25


Order 


EchoControl 2 IPMI Serial Echo Control FALSE 627 “Disabled”, “Enabled” 

HandshakeControl 

IPMI Serial Handshake 

Control FALSE 628 “Disabled”, “Enabled” 

575 

576 

577 

578 

579 

580 

581 

582 

583 

584 

585 

586 

587 

588 

589 

590 

NewLineSeq 

InputNewLineSeq 

IPMI Serial New Line 

Sequence FALSE 629 

IPMI Serial Input New 

Line Sequence FALSE 630 Enter, Null 

None, CR-LF, NULL, CR, LF- 

CR, LF 

NOTE: 1 – Enables or disables delete control on the IPMI serial interface. See Intelligent Platform Management 

Interface Specification for more details. 

NOTE: 2 – Enables or disables echo control on the IPMI serial interface. See Intelligent Platform Management 

Interface Specification for more details. 

7.5.8 IPMI Serial-over-LAN 

This section describes the attributes for iDRAC’s IPMI SOL Configuration. 


DCIM_iDRACCardInteger shall be “IPMISOL.1”. 


DCIM_iDRACCardInteger shall be “IPMI SOL”. 






Table 26 – DCIM_iDRACCardEnumeration IPMI Serial-over-LAN 


Order 


Enable IPMI SOL Enable FALSE 641 “Disabled”, “Enabled” 

BaudRate IPMI SOL Baud Rate FALSE 642 

MinPrivilege IPMI SOL Min Privilege FALSE 633 

9600, 19200, 57600, 

115200 

“Administrator”, “User”, 


591 

592 

593 

594 




Table 27 – DCIM_iDRACCardInteger IPMI Serial-over-LAN 


Order 

LowerBound 

UpperBound 

26 Version 1.3.0

AccumulateInterval 1 

SendThreshold 

IPMI SOL Accumulate 

Interval FALSE 644 1 255 

IPMI SOL Send 

Threshold FALSE 645 1 255 

595 

596 

597 

598 

599 

600 

601 

602 

603 

604 

605 

606 

607 

608 

NOTE: 1 – The typical amount of time in 5 ms increments that the BMC will wait before transmitting a partial SOL 

character data packet. See Intelligent Platform Management Interface Specification for more details. 

7.5.9 IPv4 Information 



DCIM_iDRACCardInteger shall be “IPv4.1”. 


DCIM_iDRACCardInteger shall be “IPv4 Information”. 






Table 28 – DCIM_iDRACCardEnumeration IPv4 Information 


Order 


Enable IPv4 Enable FALSE 101 “Disabled”, “Enabled” 

DHCPEnable IPv4 DHCP Enable FALSE 102 “Disabled”, “Enabled” 

DNSFromDHCP 

DNS Servers From 

DHCP FALSE 106 “Disabled”, “Enabled” 

609 

610 

611 

612 

613 





Table 29 – DCIM_iDRACCardString IPv4 Information 


Order 

MinLength 

MaxLength 

Address IPv4 Address FALSE 103 0 16 

Netmask Net Mask FALSE 104 0 16 

Gateway Gateway FALSE 105 0 16 

DNS1 DNS Server 1 FALSE 107 0 16 


614 

615 

7.5.10 IPv6 Information 

This section describes the attributes for iDRAC’s IPv6 Information Configuration. 

Version 1.3.0 27

616 

617 

618 

619 

620 

621 

622 

623 

624 


DCIM_iDRACCardInteger shall be “IPv6.1”. 


DCIM_iDRACCardInteger shall be “IPv6 Information”. 






625 

626 

Table 30 – DCIM_iDRACCardEnumeration IPv6 Information 


Order 


Enable IPV6 Enable FALSE 151 “Disabled”, “Enabled” 

627 

628 

629 

630 

631 

AutoConfig 1 IPV6 Auto Config FALSE 152 “Disabled”, “Enabled” 

DNSFromDHCP6 

DNS Server From 

DHCP6 FALSE 153 “Disabled”, “Enabled” 

NOTE: 1 – Enabling or Disabling stateless IPv6 address autoconfiguration. 





632 

633 

634 

635 

Table 31 – DCIM_iDRACCardString IPv6 Information 


Order 

MinLength 

MaxLength 

28 Version 1.3.0


Order 

MinLength 

MaxLength 

Gateway IPV6 Gateway FALSE 155 0 63 

LinkLocalAddress 

IPV6 Link Local 

Address FALSE 156 0 63 

DNS1 IPV6 DNS Server1 FALSE 158 0 63 


Address1 IPV6 Address 1 TRUE 154 0 63 















636 

637 

638 




639 

640 

641 

642 

643 

Table 32 – DCIM_iDRACCardInteger IPv6 Information 


Order 

LowerBound 

UpperBound 

Version 1.3.0 29


Order 

LowerBound 

UpperBound 

PrefixLength 

IPV6NumOfExtAddress 

IPV6 Link Local Prefix 

Length FALSE 157 1 128 

Total Number of 

Extended IP TRUE 160 0 255 

644 

645 

646 

647 

648 

649 

650 

651 

652 

653 

654 

655 

656 

7.5.11 LDAP 

This section describes the attributes for iDRAC’s LDAP Configuration. 


DCIM_iDRACCardInteger shall be “LDAP.1”. 


DCIM_iDRACCardInteger shall be “LDAP”. 






Table 33 – DCIM_iDRACCardEnumeration LDAP 


Order 


Enable LDAP Enable FALSE 1081 “Disabled”, “Enabled” 

GroupAttributeIsDN 

CertValidationEnable 

LDAP Group Attribute Is 

Domain Name FALSE 1087 “Disabled”, “Enabled” 

Enable LDAP Certificate 

Validation FALSE 1091 “Disabled”, “Enabled” 

657 

658 

659 

660 





661 

662 

663 

664 

665 

666 

667 

Table 34 – DCIM_iDRACCardString LDAP 


Order 

MinLength 

MaxLength 

30 Version 1.3.0


Order 

MinLength 

MaxLength 

Server LDAP Server FALSE 1082 0 1024 

BaseDN 1 

LDAP Base Domain 


UserAttribute LDAP User Attribute FALSE 1085 0 254 

GroupAttribute LDAP Group Attribute FALSE 1086 0 254 

BindDN 2 

BindPassword 

LDAP Bind 

Distinguished Name FALSE 1088 0 254 

LDAP Bind Password 

FALSE* (this 

attribute is for 

setting only) 1089 0 255 

SearchFilter LDAP Search Filter FALSE 1090 0 1024 

668 

669 

670 

671 

672 

673 

674 

NOTE: 1 - Domain Name of the branch of the directory where all searches should start from. 

NOTE: 2 - The distinguished name (DN) of a user used to bind to the server when searching for the login user’s DN. 

If not provided an anonymous bind will be used. 




Table 35 – DCIM_iDRACCardInteger LDAP 


Order 

LowerBound 

UpperBound 

Port LDAP Port FALSE 1083 1 65535 

675 

676 

677 

678 

679 

680 

681 

682 

683 

684 

685 

7.5.12 LDAP Group 

This section describes the attributes for iDRAC’s LDAP Group Configuration. 


DCIM_iDRACCardInteger shall be “LDAPRoleGroup.” where is a number 1 through 5. 


DCIM_iDRACCardInteger shall be “LDAP Group”. 





Table 36 – DCIM_iDRACCardString LDAP Group 


Order 

MinLength 

MaxLength 

Version 1.3.0 31


Order 

MinLength 

MaxLength 

DN 

LDAP Role Group 

Domain Name 

FALSE 

1101, 

1111, 

1121, 

1131, 

1141 0 1024 

686 

687 

688 

689 




Table 37 – DCIM_iDRACCardInteger LDAP Group 


Order 

LowerBound 

UpperBound 

690 

691 

692 

693 

694 

695 

696 

697 

698 

699 

700 

701 

702 

Privilege 1 LDAP Group Privilege FALSE 

NOTE: 1 – See ANNEX A for information on mapping into iDRAC privileges. 

7.5.13 Local Security 

1102, 

1112, 

1122, 

1132, 

1142 0 511 



DCIM_iDRACCardInteger shall be “LocalSecurity.1”. 


DCIM_iDRACCardInteger shall be “Local Security”. 






Table 38 – DCIM_iDRACCardEnumeration Local Security 


Order 


PrebootConfig Preboot Config FALSE 741 “Disabled”, “Enabled” 

LocalConfig Local Config FALSE 742 “Disabled”, “Enabled” 

703 

704 

705 

706 

7.5.14 NIC Information 

This section describes the attributes for iDRAC’s NIC Configuration. 


DCIM_iDRACCardInteger shall be “NIC.1”. 

32 Version 1.3.0

707 

708 

709 

710 

711 

712 

713 


DCIM_iDRACCardInteger shall be “NIC Information”. 






714 

715 

716 

Table 39 – DCIM_iDRACCardEnumeration NIC Information 


Order 


Enable NIC Enable FALSE 51 “Disabled”, “Enabled” 

Selection NIC Selection FALSE 53 

Failover NIC Failover FALSE 54 

“Dedicated”, “LOM1”, 

“LOM2”, “LOM3”, ”LOM4” 

“None”, ”LOM1”, ”LOM2”, 

”LOM3”, ”LOM4”, ”All” 

Speed NIC Speed FALSE 56 “10”, “100”, “1000” 

Autoneg NIC Auto Negotiation FALSE 55 “Disabled”, “Enabled” 

Duplex NIC Duplex FALSE 57 “Half”, “Full” 

DNSRegister DNS Register RAC FALSE 10 “Disabled”, “Enabled” 

DNSDomainFromDHCP 

DNS Domain Name 

from DHCP FALSE 180 “Disabled”, “Enabled” 

VLanEnable Enable VLAN FALSE 63 “Disabled”, “Enabled” 

AutoDetect Auto NIC Enable FALSE 66 “Disabled”,”Enabled” 

717 

718 

719 

720 

721 





Table 40 – DCIM_iDRACCardString NIC Information 


Order 

MinLength 

MaxLength 

MACAddress MAC Address TRUE 52 0 17 

DNSRacName DNS RAC Name FALSE 59 0 63 

DNSDomainName DNS Domain Name FALSE 181 0 254 

722 

723 

724 




Version 1.3.0 33

725 

Table 41 – DCIM_iDRACCardInteger NIC Information 


Order 

LowerBound 

UpperBound 

MTU NIC MTU FALSE 58 576 1500 

VLanID VLAN ID FALSE 65 0 4094 

VLanPriority VLAN Priority FALSE 64 0 7 

DedicatedNICScanT 

ime 

SharedNICScanTim 

e 

Shared to Dedicated 

Failover Timeout FALSE 67 5 255 

Dedicated to Shared 

Failover Timeout FALSE 68 5 255 

726 

727 

728 

729 

730 

731 

732 

733 

734 

735 

736 

737 

738 

7.5.15 OS-BMC Passthru Configuration 

This section describes the attributes for iDRAC’s OS-BMC Passthru Configuration.. 


DCIM_iDRACCardInteger shall be “OS-BMC.1”. 


DCIM_iDRACCardInteger shall be “OS-BMC Passthru Configuration”. 






Table 42 – DCIM_iDRACCardEnumeration OS-BMC Passthru Configuration 


Order 

AdminState 

PTCapability 


LC and Host Private 

Channel State FALSE 1241 “Disabled”, “Enabled” 

OSBMC Pass Through 

Capability TRUE 1240 

“Not Capable”, “Capable”,” 

Unavailable” 

739 

740 

741 

742 

743 





Table 43 – DCIM_iDRACCardString OS-BMC Passthru Configuration 


Order 

OsIpAddress 

MinLength 

OS-BMC PT iDRAC PT 

Endpoint IP Address FALSE 1243 0 16 

MaxLength 

744 

34 Version 1.3.0

745 

746 

747 

748 

749 

750 

751 

752 

753 

754 

755 

756 

7.5.16 Remote Racadm Configuration 

This section describes the attributes for iDRAC’s Remote Racadm Configuration. 


DCIM_iDRACCardInteger shall be “Racadm.1”. 


DCIM_iDRACCardInteger shall be “Remote Racadm Configuration”. 






Table 44 – DCIM_iDRACCardEnumeration Remote Racadm Configuration 


Order 


Enable Remote Enable FALSE 591 “Disabled”, “Enabled” 

757 

758 

759 

760 




Table 45 – DCIM_iDRACCardInteger Remote Racadm Configuration 


Order 

LowerBound 

UpperBound 

Timeout Remote Timeout FALSE 592 10 1920 

761 

762 

763 

764 

765 

766 

767 

768 

769 

770 

771 

772 

773 

NOTE: Defines the idle timeout (in seconds) for the Remote RACADM interface. If a remote RACADM session 

remains inactive for more than the specified sessions, the session is closed. 

7.5.17 RAC Remote Hosts 

This section describes the attributes for iDRAC’s RAC Remote Hosts Configuration. 


DCIM_iDRACCardInteger shall be “RemoteHosts.1”. 


DCIM_iDRACCardInteger shall be “RAC Remote Hosts”. 





Table 46 – DCIM_iDRACCardString RAC Remote Hosts 


Order 

SMTPServerIPAddress 

MinLength 

SMTP Server IP 

Address FALSE 541 0 255 

MaxLength 

774 

Version 1.3.0 35

775 

776 

777 

778 

779 

780 

781 

782 

783 

784 

785 

7.5.18 RAC Certificate 

This section describes the attributes for iDRAC’s RAC Certificate Configuration. 


DCIM_iDRACCardInteger shall be “Security.1”. 


DCIM_iDRACCardInteger shall be “RAC Certificate”. 






786 

787 

Table 47 – DCIM_iDRACCardEnumeration RAC Certificate 


Order 


CsrKeySize CSR Key Size FALSE 768 1024, 2048 

788 

789 

790 

791 





792 

793 

794 

Table 48 – DCIM_iDRACCardString RAC Certificate 


Order 

MinLength 

MaxLength 

CsrCommonName CSR Common Name FALSE 761 0 254 

CsrOrganizationName 

CSR Organization 


CsrOrganizationUnit CSR Organization Unit FALSE 763 0 254 

CsrLocalityName CSR Locality Name FALSE 764 0 254 

CsrStateName CSR State Name FALSE 765 0 254 

CsrCountryCode CSR Country Code FALSE 766 0 2 

CsrEmailAddr CSR Email Address FALSE 767 0 254 

795 

796 

797 

798 

7.5.19 Serial Configuration 

This section describes the attributes for iDRAC’s Serial Configuration. 


DCIM_iDRACCardInteger shall be “Serial.1”. 

36 Version 1.3.0

799 

800 

801 

802 

803 

804 

805 

806 


DCIM_iDRACCardInteger shall be “Serial Configuration”. 






Table 49 – DCIM_iDRACCardEnumeration Serial Configuration 


Order 


Enable Serial Console Enable FALSE 601 “Disabled”, “Enabled” 

BaudRate Serial Baud Rate FALSE 602 

NoAuth 

9600, 19200, 38400, 

57600, 115200 

Serial Console No 

Authentication FALSE 604 “Disabled”, “Enabled” 

807 

808 

809 

810 





811 

812 

813 

Table 50 – DCIM_iDRACCardString Serial Configuration 

Command 1 


Order 

MinLength 

Serial Console 

Command FALSE 606 0 128 

MaxLength 

814 

815 

816 

817 

818 

NOTE: 1 – Specifies a serial command that is executed after a user logs into the serial console interface. 




Table 51 – DCIM_iDRACCardInteger Serial Configuration 


Order 

IdleTimeout 

LowerBound 

Serial Console Idle 

Timeout FALSE 603 60 1920 

HistorySize Serial History Size FALSE 605 0 8192 

UpperBound 

819 

820 

821 

822 

823 

7.5.20 RAC Serial Redirection 

This section describes the attributes for iDRAC’s RAC Serial Redirection Configuration. 


DCIM_iDRACCardInteger shall be “SerialRedirection.1”. 

Version 1.3.0 37

824 

825 

826 

827 

828 

829 

830 

831 


DCIM_iDRACCardInteger shall be “RAC Serial Redirection”. 






Table 52 – DCIM_iDRACCardEnumeration RAC Serial Redirection 

Enable 


Order 


Serial Communication 

Redirection Enable FALSE 611 “Disabled”, “Enabled” 

832 

833 

834 

835 

836 





Table 53 – DCIM_iDRACCardString RAC Serial Redirection 


Order 

MinLength 

MaxLength 

QuitKey Serial Console Quit Key FALSE 612 0 2 

837 

838 

839 

840 

841 

842 

843 

844 

845 

846 

847 

848 

7.5.21 Smart Card Configuration 

This section describes the attributes for iDRAC’s Smart Card Configuration. 


DCIM_iDRACCardInteger shall be “SmartCard.1”. 


DCIM_iDRACCardInteger shall be “Smart Card Configuration”. 






Table 54 – DCIM_iDRACCardEnumeration Smart Card Configuration 


Order 

SmartCardLogonEnable 


Smart Card Logon 


SmartCardCRLEnable Smart Card CRL Enable FALSE 1062 “Disabled”, “Enabled” 

849 

850 

851 

852 

7.5.22 SNMP Configuration 

This section describes the attributes for iDRAC’s SNMP Configuration. 


DCIM_iDRACCardInteger shall be “SNMP.1”. 

38 Version 1.3.0

853 

854 

855 

856 

857 

858 

859 

860 


DCIM_iDRACCardInteger shall be “SNMP Configuration”. 






Table 55 – DCIM_iDRACCardEnumeration SNMP Configuration 


Order 


AgentEnable SNMP Agent Enable FALSE 701 “Disabled”, “Enabled” 

TrapFormat SNMP Trap Format FALSE 703 “SNMPv1”,”SNMPv2” 

SNMPProtocol SNMP Protocol FALSE 704 “All”, “SNMPv3” 

861 

862 

863 

864 

865 





Table 56 – DCIM_iDRACCardString SNMP Configuration 


Order 

AgentCommunity 

MinLength 

SNMP Agent 

Community FALSE 702 0 31 

MaxLength 

866 

867 

868 

869 

870 

871 

872 

873 

874 

875 

876 

7.5.23 SNMP Alert Destination 1 

This section describes the attributes for iDRAC’s SNMP Alert Destination configuration. 

The GroupID property for the DCIM_iDRACCardEnumeration and DCIM_iDRACCardString shall be 

“SNMPAlert.” where is a number from 1 to 8. 

The GroupDisplayName property for the DCIM_iDRACCardEnumeration and DCIM_iDRACCardString 

shall be “SNMP Alert Destination”. 






877 

878 

Table 57 – DCIM_iDRACCardEnumeration SNMP Alert Destination 


Order 

State State FALSE 


1602, 

1604, 

1606, 

1608, 

1610, “Disabled”, “Enabled” 

Version 1.3.0 39


Order 

1612, 

1614, 

1616 


879 

880 

881 

882 

883 





Table 58 – DCIM_iDRACCardString SNMP Alert Destination 

AttributeName 

Attribute 

Description 

Destination 2 Alert Destination FALSE 

IsReadOnly 

Display 

Order 

MinLength 

1601, 

1603, 

1605, 

1607, 

1609, 

1611, 

1613, 

1615 0 255 

MaxLength 

884 

885 

886 

887 

888 

889 

890 

891 

892 

893 

894 

895 

896 

897 

898 

899 

900 

901 

902 

903 

NOTE: 1 - These attributes are in lieu of the SNMP Trap IPv4 and SNMP Trap IPv6 attributes. Althought the SNMP 

Trap IPv4 and SNMP Trap IPv6 attributes are deprecated, they shall still be functional for backwards compatibility. 

The SNMPTrapIPv4.1 through SNMPTrapIPv4.4 attributes shall be mapped to this group’s SNMPAlert.1 through 

SNMPAlert.4 attributes, and the SNMPTrapIPv6.1 through SNMPTrapIPv6.4 attributes shall be mapped to this 

group’s SNMPAlert.5 through SNMPAlert.8 attributes. 

NOTE: 2 - The attribute value, the CurrentValue and PendingValue properties, may be an IPv4 address, an IPv6 

address or a fully qualified domain name (FQDN). 

7.5.24 RAC SSH 

This section describes the attributes for iDRAC’s SSH Configuration. 


DCIM_iDRACCardInteger shall be “SSH.1”. 


DCIM_iDRACCardInteger shall be “RAC SSH”. 






Table 59 – DCIM_iDRACCardEnumeration RAC SSH 


Order 


Enable Enable FALSE 561 “Disabled”, “Enabled” 

904 

905 

906 




40 Version 1.3.0

907 

Table 60 – DCIM_iDRACCardInteger RAC SSH 


Order 

LowerBound 

UpperBound 

Port SSH Port FALSE 562 10 65535 

Timeout 1 SSH Idle Timeout FALSE 563 60 10800 

908 

909 

910 

911 

912 

913 

914 

915 

916 

917 

918 

919 

920 

NOTE: 1 - Specifies the number of seconds after which an idle Telnet session is automatically terminated. 

7.5.25 RAC Telnet 

This section describes the attributes for iDRAC’s Telnet Configuration. 


DCIM_iDRACCardInteger shall be “Telnet.1”. 


DCIM_iDRACCardInteger shall be “Telnet Configuration”. 






Table 61 – DCIM_iDRACCardEnumeration Telnet Configuration 


Order 



921 

922 

923 




924 

925 

Table 62 – DCIM_iDRACCardInteger Telnet Configuration 


Order 

LowerBound 

UpperBound 

Port Telnet Port FALSE 552 10 65535 

Timeout 1 Timeout FALSE 553 60 10800 

926 

927 

928 

929 

930 

931 

932 

NOTE: 1 - Specifies the number of seconds after which an idle Telnet session is automatically terminated. 

7.5.26 Sys Log 

This section describes the attributes for iDRAC’s Sys Log Configuration. 


DCIM_iDRACCardInteger shall be “SysLog.1”. 


DCIM_iDRACCardInteger shall be “Sys Log”. 

Version 1.3.0 41

933 

934 

935 

936 

937 

938 






Table 63 – DCIM_iDRACCardEnumeration Sys Log 


Order 

SysLogEnable Sys Log Enable FALSE 1071 


“Disabled”, 

“Enabled” 

939 

940 

941 

942 

943 





Table 64 – DCIM_iDRACCardString Sys Log 


Order 

MinLength 

MaxLength 

Server1 Sys Log Server 1 FALSE 1073 0 63 

Server2 Sys Log Server 2 FALSE 1074 0 63 

944 

945 

946 




947 

948 

Table 65 – DCIM_iDRACCardInteger Sys Log 


Order 

LowerBound 

UpperBound 

Port Sys Log Port FALSE 1072 1 65535 

949 

950 

951 

952 

953 

954 

955 

956 

957 

958 

959 

960 

7.5.27 iDRAC Firmware Update 

This section describes the attributes for iDRAC’s Update Configuration. 

The GroupID property for the DCIM_iDRACCardEnumeration and DCIM_iDRACCardString shall be 

“Update.1”. 

The GroupDisplayName property for the DCIM_iDRACCardEnumeration and DCIM_iDRACCardString 

shall be “Firmware Update”. 






42 Version 1.3.0

961 

Table 66 – DCIM_iDRACCardEnumeration Update 


Order 

FwUpdateTFTPEnable 

Enable or Disable TFTP 

for Firmware Update FALSE 451 



“Enabled” 

962 

963 

964 

965 

966 





Table 67 – DCIM_iDRACCardString Update 


Order 

FwUpdateIPAddr 

FwUpdatePath 

Firmware Update IP 

Address FALSE 452 0 

MinLength 

Firmware Update File 

Path FALSE 453 0 255 

MaxLength 

967 

968 

969 

970 

971 

972 

973 

974 

975 

976 

977 

978 

7.5.28 User Domain 

This section describes the attributes for iDRAC’s User Domain Configuration. 


DCIM_iDRACCardInteger shall be “UserDomain.” where “” is a number 1 through 40. 


DCIM_iDRACCardInteger shall be “User Domain”. 





Table 68 – DCIM_iDRACCardString User Domain 


Order 

Name User Domain Name FALSE 

MinLength 

851, 

855, … , 

1046 0 255 

MaxLength 

979 

980 

981 

982 

983 

984 

985 

7.5.29 iDRAC Users 

This section describes the attributes for iDRAC’s Users Configuration. 


DCIM_iDRACCardInteger shall be “Users.” where is a number from 1 to 16. 


DCIM_iDRACCardInteger shall be “iDRAC Users”. 

Version 1.3.0 43

986 

987 

988 

989 

990 






991 

992 

993 

Table 69 – DCIM_iDRACCardEnumeration Users 


Order 

IpmiLanPrivilege 

IpmiSerialPrivilege 

Enable 

SolEnable 

ProtocolEnable 

AuthenticationProtocol 

PrivacyProtocol 

User Admin IPMI LAN 

Privilege 

User Admin IPMI Serial 

Privilege 

FALSE 1 254, 

264, … , 

404 

FALSE 1 255, 

265, ... , 

405 

User Admin Enable FALSE 1 256, 

266, … , 

406 

User Admin SOL Enable FALSE 1 257, 

267, … , 

407 

SNMP V3 Protocol 

Enable 

SNMP V3 Authentication 

Protocol 

SNMP V3 Privacy 

Protocol 

FALSE 1 258,268 

,278,…., 

408 

FALSE 1 259,269 

,279,….. 

,409 

FALSE 1 260,270 

,280,…., 

410 


User, Operator, 

Administrator, No 

Access 

User, Operator, 

Administrator, No 

Access 


“Enabled” 


“Enabled” 


“Enabled” 

“None” “MD5” 

“SHA” 

“None” "DES” “AES” 

994 

995 

996 

997 

998 

999 

1000 

1001 

NOTE: 1 – IpmiLanPrivilege, IpmiSerialPrivilege, Enable, SolEnable, ProtocolEnable, AuthenticationProtocol and 

PrivacyProtocol attribute for Users.1 GroupID is Read-Only, but for the GroupID Users.2 to Users.16, the attribute is 

settable. 





Table 70 – DCIM_iDRACCardString iDRAC Users 


Order 

MinLength 

MaxLength 

UserName User Admin User Name FALSE 1 401 0 16 

251, 

261, … , 

Password 2 User Admin Password FALSE 

252, 

262, … , 

402 0 20 

44 Version 1.3.0

1002 

1003 

1004 

1005 

1006 

1007 

1008 

NOTE: 1 – UserName attribute for Users.1 GroupID is Read-Only, but for the GroupID Users.2 to Users.16, the 

attribute is settable. 

NOTE: 2 – Password attribute is write-only, and thus its value is never returned in the CurrentValue, PendingValue, 

and DefaultValue properties. 




1009 

1010 

Table 71 – DCIM_iDRACCardInteger iDRAC Users 


Order 

LowerBound 

UpperBound 

1011 

1012 

1013 

1014 

1015 

1016 

1017 

1018 

1019 

1020 

1021 

1022 

1023 

1024 

1025 

FALSE 1 Privilege 3 User Admin Privilege 

263, … , 

403 0 511 

253, 

NOTE: 1 – Privilege attribute for Users.1 GroupID is Read-Only, but for the GroupID Users.2 to Users.16, the 

attribute is settable. 

NOTE: 3 – See ANNEX A for information on mapping into iDRAC privileges. 

7.5.30 Virtual Console Configuration 

This section describes the attributes for iDRAC’s Virtual Console Configuration. 


DCIM_iDRACCardInteger shall be “VirtualConsole.1”. 


DCIM_iDRACCardInteger shall be “Virtual Console Configuration”. 






Table 72 – DCIM_iDRACCardEnumeration Virtual Console Configuration 


Order 



LocalVideo Local Video FALSE 583 “Disabled”, “Enabled” 

PluginType Plugin Type FALSE 584 “Active X”, “Java” 

EncryptEnable Encrypt Enable FALSE 582 “None”, “AES” 

AccessPrivilege 

Default action upon 

session sharing request 

timeout FALSE 588 

“Deny Access”, “Read Only 

Access”, “Full Access” 

1026 

1027 

1028 




Version 1.3.0 45

1029 

Table 73 – DCIM_iDRACCardInteger Virtual Console Configuration 


Order 

LowerBound 

UpperBound 

Timeout 1 Timeout FALSE 587 60 10800 

MaxSessions Max Sessions FALSE 585 1 4 

1030 

1031 

1032 

1033 

1034 

1035 

1036 

1037 

1038 

1039 

1040 

1041 

1042 

Port vKVM Port FALSE 586 1 65535 

NOTE: 1 – Timeout in seconds. 

7.5.31 Virtual Media Configuration 

This section describes the attributes for iDRAC’s Virtual Media Configuration. 


DCIM_iDRACCardInteger shall be “VirtualMedia.1”. 


DCIM_iDRACCardInteger shall be “Virtual Media”. 






Table 74 – DCIM_iDRACCardEnumeration Virtual Media Configuration 


Order 


Attached 

RAC Virtual Media 

Attached FALSE 711 

“Detached”, “Attached”, 

“AutoAttach” 

BootOnce 

KeyEnable 

FloppyEmulation 

Virtual Media Boot 

Once FALSE 712 “Disabled”, “Enabled” 

Virtual Media Key 


Virtual Media Floppy 

Emulation FALSE 714 “Disabled”, “Enabled” 

1043 

1044 

1045 

1046 

1047 

1048 

1049 

1050 

1051 

7.5.32 RAC Web Server 

This section describes the attributes for iDRAC’s Web Server Configuration. 


DCIM_iDRACCardInteger shall be “WebServer.1”. 


DCIM_iDRACCardInteger shall be “RAC Web Server”. 




46 Version 1.3.0

1052 

1053 

1054 



Table 75 – DCIM_iDRACCardEnumeration Web Server 


Order 



LowerEncryptionBitLength 

Lower Encryption Bit 

Length FALSE 575 “Disabled”, “Enable” 

1055 

1056 

1057 

1058 




Table 76 – DCIM_iDRACCardInteger Web Server 


Order 

LowerBound 

UpperBound 

HttpPort Http Port FALSE 572 10 65535 

HttpsPort Https Port FALSE 573 1 65535 

Timeout Timeout FALSE 574 60 10800 

1059 

1060 

1061 

1062 

1063 

1064 

1065 

1066 

1067 

1068 

7.5.33 Time Zone Configuration 

This section describes the attributes for iDRAC’s Time Zone Configuration. 


DCIM_iDRACCardInteger shall be “Time.1”. 


DCIM_iDRACCardInteger shall be “Time Zone Configuration Information”. 




Table 77 – DCIM_iDRACCardInteger Time Zone Configuration Information 


Order 

LowerBound 

UpperBound 

TimeZoneOffset Tune Time Zone Offset FALSE 751 0 46800 

DaylightOffset Tune Day Light Offset FALSE 752 0 60 

1069 

1070 

1071 

1072 

1073 





Table 78 – DCIM_iDRACCardString Time Zone Configuration Information 


Order 

MinLength 

MaxLength 

Version 1.3.0 47


Order 

MinLength 

MaxLength 

TimeZone Time Zone String FALSE 753 0 32 

1074 

1075 

1076 

1077 

1078 

1079 

1080 

1081 

1082 

1083 

1084 

1085 

The time zone string would be what is supported by Linux (/usr/share/zoneinfo) 

7.5.34 NTP Configuration 

This section describes the attributes for iDRAC’s NTP Configuration 


DCIM_iDRACCardInteger shall be “NTPConfigGroup.1”. 


DCIM_iDRACCardInteger shall be “NTP Configuration Group”. 





Table 79 – DCIM_iDRACCardString NTP Configuration 


Order 

MinLength 

MaxLength 

NTP1 NTP Server 1 FALSE 2001 0 254 



1086 

1087 

1088 

1089 

1090 

1091 






Table 80 – DCIM_iDRACCardEnumeration NTP Configuration 


Order 


NTPEnable NTP Enable FALSE 2000 “Disabled”, “Enabled” 

1092 

1093 

1094 

1095 

1096 

1097 

1098 


heading corresponds to a property name on the DCIM_iDRACCardInteger class. The Description column 

contains the description for each of the attribute. Each row contains the values for the properties listed in 

the column headings. The PossibleValues property is an array property represented in the table as 

comma delimited list. 

Table 82 – DCIM_iDRACCardInteger NTP Configuration 


Order 

Lower 

Bound 

Upper 

Bound 

48 Version 1.3.0

NTPMaxDist NTP Maximum Distance FALSE 2005 1 128 

1099 

1100 

1101 

1102 

1103 

1104 

1105 

1106 

1107 

1108 

1109 

1110 

1111 

7.5.35 Remote File Share Configuration 

This section describes the attributes for iDRAC’s Remote File Share Configuration. 


DCIM_iDRACCardInteger shall be “RFS.1”. 


DCIM_iDRACCardInteger shall be “Remote File Share”. 






Table 81 – DCIM_iDRACCardEnumeration Remote File Share 


Order 


MediaAttachState Media Attach State TRUE 1231 “Attached”, “Detached” 

AttachMode Media Attach Mode FALSE 1232 “Attach”, “Auto Attach” 

1112 

1113 

1114 

1115 

1116 

1117 

1118 

1119 

1120 

7.5.36 NIC Static Information 

This section describes the attributes for iDRAC’s NIC Static Configuration. 

The GroupID property for the DCIM_iDRACCardString shall be “NICStatic.1”. 

The GroupDisplayName property for the DCIM_iDRACCardString shall be “NIC Static Information”. 





Table 82 – DCIM_iDRACCardString NIC Static Information 


Order 

MinLength 

MaxLength 

DNSDomainName DNS Domain Name FALSE 182 0 254 

1121 

1122 

1123 

1124 

1125 

7.5.37 IPv4 Static Information 

This section describes the attributes for iDRAC’s IPv4 Static Information. 

The GroupID property for the DCIM_iDRACCardString shall be “Pv4Static.1”. 

The GroupDisplayName property for the DCIM_iDRACCardString shall be “IPv4 Static Information”. 

Version 1.3.0 49

1126 

1127 

1128 

1129 

1130 





Table 83 – DCIM_iDRACCardString IPv4 Static Information 


Order 

MinLength 

MaxLength 

Address IPv4 Address FALSE 183 0 16 

Netmask Net Mask FALSE 184 0 16 

Gateway Gateway FALSE 185 0 16 



1131 

1132 

1133 

1134 

1135 

1136 

1137 

1138 

1139 

1140 

1141 

7.5.38 IPv6 Static Information 

This section describes the attributes for iDRAC’s IPv6 Static Information. 

The GroupID property for the DCIM_iDRACCardString, and DCIM_iDRACCardInteger shall be 

“IPv6Static.1”. 

The GroupDisplayName property for the DCIM_iDRACCardString, and DCIM_iDRACCardInteger shall 

be “IPv6 Static Information”. 





Table 84 – DCIM_iDRACCardString IPv6 Static Information 


Order 

MinLength 

MaxLength 

Address1 IPV6 Address 1 FALSE 188 0 63 

Gateway IPV6 Gateway FALSE 189 0 63 



1142 

1143 

1144 

1145 




Table 85 – DCIM_iDRACCardInteger IPv6 Static Information 


Order 

LowerBound 

UpperBound 

PrefixLength 

IPV6 Link Local Prefix 

Length FALSE 190 1 128 

50 Version 1.3.0

1146 

1147 

1148 

1149 

1150 

1151 

1152 

1153 

1154 

1155 

1156 

1157 

1158 

7.5.39 Default Credential Mitigation Configuration 

This section describes the attributes for iDRAC’s credential mitigation configuration. 

The GroupID property for the DCIM_iDRACCardEnumeration shall be 

“DefaultCredentialMitigationConfigGroup.1”. 

The GroupDisplayName property for the DCIM_iDRACCardEnumeration shall be “Default Credential 

Mitigation Configuration”. 






Table 86 – DCIM_iDRACCardEnumeration Default Credential Mitigation Configuration 


Order 


DefaultCredentialMitigatio 

n 

Default Credential 

Mitigation FALSE 1700 “Enabled”, “Disabled” 

1159 

1160 

1161 

1162 

1163 

1164 

1165 

1166 

1167 

7.5.40 IPv6 URL Information 

This section describes the attributes for iDRAC’s IPv6 URL information. 

The GroupID property for the DCIM_iDRACCardString shall be “IPv6URL.1”. 

The GroupDisplayName property for the DCIM_iDRACCardString shall be “iDRAC IPv6 URL”. 





Table 87 – DCIM_iDRACCardString IPv6 URL Information 


Order 

MinLength 

MaxLength 

URL IPv6 URL TRUE 2120 0 80 

1168 

1169 

1170 

1171 

1172 

1173 

1174 

1175 

1176 

7.5.41 iDRAC Logging 

This section describes the attributes for iDRAC’s iDRAC Logging information. 

The GroupID property for the DCIM_iDRACCardEnumeration shall be “Logging.1”. 

The GroupDisplayName property for the DCIM_iDRACCardEnumeration shall be “iDRAC Logging”. 






Version 1.3.0 51

1177 

Table 88 – DCIM_iDRACCardEnumeration iDRAC Logging 


Order 


SELOEMEventFilterEnable 

SEL OEM Event Filter 

Enable FALSE 2130 “Disabled”,”Enabled” 

1178 

1179 

1180 

1181 

1182 

1183 

1184 

1185 

1186 

1187 

1188 

1189 

1190 

1191 

1192 

7.6 DCIM_iDRACCardService – iDRAC CardService 

This section describes the implementation for the DCIM_iDRACCardService class. It is used to host the 

ApplyAttributes method which is used to change the values of the iDRAC Card attribute values. 


The class Resource URI shall be “http://schemas.dell.com/wbem/wscim/1/cimschema/2/DCIM_iDRACCardService?__cimnamespace=root/dcim” 

The key properties shall be SystemCreationClassName, CreationClassName, SystemName and Name. 

The instance Resource URI for DCIM_iDRACCardService instance shall be: 

“http://schemas.dell.com/wbem/wscim/1/cimschema/2/DCIM_iDRACCardService?__cimnamespace=root/dcim+ 

SystemCreationClassName= 

DCIM_ComputerSyste +CreationClassName= DCIM_iDRACCardServcie + SystemName= DCIM:ComputerSystem 

+Name= DCIM:iDRACCardService” 

The following table lists the implemented operations on DCIM_iDRACCardService. 

Table 89 – DCIM_IDRACCardSerice - Operations 




Invoke Mandatory Instance URI 

1193 

1194 

1195 

1196 

1197 

1198 

1199 


The following table details the implemented properties for DCIM_iDRACCardServcie instance 

representing the integer type attributes of a remote access card in a system. The “Requirements” column 

shall denote whether the property is implemented (for requirement definitions, see section 3). The 

“Additional Requirements” column shall denote either possible values for the property, or requirements on 

the value formulation. 

1200 

1201 

1202 

1203 

1204 

Table 90 – DCIM_IDRACCardServcie - Properties 

Properties and Methods Requirements Type Requirement and description 

52 Version 1.3.0

Properties and Methods Requirements Type Requirement and description 

SystemCreationClassName Mandatory string Key(This property value shall be 

“DCIM_ComputerSystem”) 

CreationClassName Mandatory string Key (This property value shall be 

“DCIM_iDRACCardService”) 

SystemName Mandatory string Key (This property value shall be 

“DCIM:ComputerSystem”) 

Name Mandatory string This property shall have value of " 

DCIM:iDRACCardService ". 

ElementName Mandatory string This property shall have value of 

“"DRAC Service". 

1205 

1206 

1207 

1208 

1209 

1210 

1211 

1212 

1213 

1214 

1215 

1216 

1217 

1218 

1219 

1220 

1221 

1222 

1223 

7.7 iDRAC Card Profile Profile Registration 

This section describes the implementation for the DCIM_LCRegisteredProfile class. 

This class shall be instantiated in the Interop Namespace: root/interop. 


The class Resource URI shall be "http://schemas.dmtf.org/wbem/wscim/1/cimschema/2/CIM_RegisteredProfile?__cimnamespace=root/interop" 

The key property shall be the InstanceID property. 

The instance Resource URI shall be: “http://schemas.dell.com/wbem/wscim/1/cimschema/2/DCIM_LCRegisteredProfile?__cimnamespace=root/interop+InstanceID= 

DCIM:iDRACCard:1.0.0” 


The following table lists the implemented operations on DCIM_LCRegisteredProfile. 

Table 91 – DCIM_LCRegisteredProfile - Operations 





The following table details the implemented properties for DCIM_LCRegisteredProfile instance 

representing iDRAC Card Profile implementation. The “Requirements” column shall denote whether the 

property is implemented (for requirement definitions, see section 3). The “Additional Requirements” 

column shall denote either possible values for the property, or requirements on the value formulation. 

Table 92 – DCIM_LCRegisteredProfile - Properties 

Property Name Requirement Type Additional Requirements 

InstanceID Mandatory String DCIM:iDRACCard:1.0.0 

RegisteredName 

Mandatory 

String This property shall have a value of "iDRAC 

Card". 

RegisteredVersion Mandatory String This property shall have a value of "1.3.0". 

RegisteredOrganization Mandatory Uint16 This property shall have a value of 1 (Other). 

OtherRegisteredOrganization Mandatory String The property value shall match “DCIM”. 

Version 1.3.0 53

Property Name Requirement Type Additional Requirements 

AdvertisedTypes[] Mandatory Uint16 

This property array shall contain [1(Other), 1 

(Other)]. 

AdvertiseTypeDescriptions[] Mandatory String 

This property array shall contain ["WS-Identify", 

"Interop Namespace"]. 

This property array shall describe the required 

licenses for this profile. 

ProfileRequireLicense[] Mandatory String 

ProfileRequireLicenseStatus[] Mandatory String 

If no license is required for the profile, the 

property shall have value NULL. 

This property array shall contain the status for the 

corresponding license in the same element index 

of the ProfileRequireLicense array property. Each 

array element shall contain: 

“LICENSED” 

“NOT_LICENSED” 

If no license is required for the profile, the 

property shall have value NULL. 

1224 

1225 

1226 

1227 

1228 

1229 

1230 

1231 

1232 

1233 

1234 

1235 

1236 

1237 

1238 

8 Methods 

This section details the requirements for supporting extrinsic methods for the CIM elements defined by 

this profile. 

8.1 DCIM_iDRACCardService.SetAttribute( ) 

The SetAttribute( ) method is used to set or change the value of a iDRAC Card attribute. 

Invocation of the SetAttribute( ) method shall change the value of the 

DCIM_IDRACCardAttribute.CurrentValue or DCIM_IDRACCardAttribute.PendingValue property to the 

value specified by the AttributeValue parameter if the DCIM_IDRACCardAttribute.IsReadOnly property is 

FALSE. 

Invocation of this method when the DCIM_IDRACCardAttribute.IsReadOnly property is TRUE shall result 

in no change to the value of the DCIM_IDRACCardAttribute.CurrentValue property. The results of 

changing this value is described with the SetResult parameter. 

Return code values for the SetAttribute( ) method are specified in Table 93 and parameters are specified 

in Table 94 –. Invoking the SetAttribute( ) method multiple times can result in the earlier requests being 

overwritten or lost. 

1239 

1240 

Table 93 – SetAttribute( ) Method: Return Code Values 

Value 

Description 

0 Completed with no error 

2 Failed 

1241 

Table 94 – SetAttribute( ) Method: Parameters 

Qualifiers Name Type Description/Values 

IN, REQ Target String FQDD of the iDRAC Card 

54 Version 1.3.0


IN, REQ AttributeName String Shall be formatted in the following way: 

#. 

Example: “MyGroup#MyAttribute” 

IN, REQ AttributeValue[] String Shall contain the required attribute value. For non-array 

attributes, only the first element shall be populated. 

If the value is valid, the CurrentValue or PendingValue 

property of the specified attribute will be modified. 

OUT SetResult String Returns: 

"Set CurrentValue" when the attributes current 

value is set. 

“Set PendingValue” when the attributes pending 

value is set. 

OUT RebootRequired String Returns: 

“Yes” if reboot is required, 

“No” if reboot is not required. 

OUT MessageID String Error Message ID may be used to look-up in the Dell 

Message registry files. For more information, see Error 

Message Registry. 

OUT Message String Error Message in English corresponding to MessageID is 

returned if the method fails to execute 

OUT MessageArguments[] String Substitution variables for dynamic error messages 

1242 

Table 95 – SetAttribute( ) Method: Standard Messages 

MessageID (OUT parameter) Message MessageArguments[] 

RAC001 

RAC002 

RAC003 

RAC004 

RAC005 

RAC006 

RAC007 

RAC008 

RAC009 

RAC010 

RAC011 

RAC012 

RAC013 

RAC014 

RAC015 

The command was successful 

General failure 

Missing required parameter 

 

Invalid parameter value for 

 

Mismatch in AttributeName and 

AttributeValue count 

AttributeValue cannot be changed for 

ReadOnly Attrinbute Name 

Input out of range 

Invalid boolean Value 

String exceeds maximum length 

Invalid character value 

Job already exists Cannot process 

more Sets 

User is not Authorized to perform this 

operation 

Invalid FQDD 

Invalid Attribute was Entered 

Not one of the Possible Values for 

AttributeName 

AttributeName, AttributeValue, 

Target 


Target 

AttributeName 

Version 1.3.0 55


RAC016 

RAC017 

RAC018 

RAC019 

RAC020 

RAC021 

RAC022 

RAC023 

RAC024 

RAC025 

RAC026 

RAC027 

RAC028 

RAC029 

RAC030 

RAC031 

RAC032 

RAC033 

RAC034 

RAC035 

RAC037 

RAC038 

RAC039 

RAC040 

RAC041 

Invalid AttributeName 

Job created to apply the attribute 

value 

Completed with Errors 

Job did not complete successfully. 

Completed 

DHCP is Enabled so cannot set 

static values for IPAddress Net mask 

or Gateway 

The User Name is not configured so 

cannot Enable the User or set values 

for User Password IPMILan 

IPMISerial or User Admin Privilege 

The User Password is not configured 

so cannot Enable the User or set 

values for IPMILan IPMISerial or 

User Admin Privilege 

VLAN is Disabled so cannot set 

VLAN Priority 

DNS from DHCP is Enabled so 

cannot set values for DNS1 or DNS2 

Domain Name from DHCP Enabled 

so cannot set DNS Domain Name 

Auto negotiation is Enabled so 

cannot set values for Speed or 

Duplex 

DHCP is Disabled so cannot Enable 

DNS Domain Name From DHCP or 

DNS From DHCP 

Required Dependancy not found in 

input 

Required Attribute that this Attribute 

is dependent on has incorrect value 

Invalid Value specified for the User 

name 

Invalid Value specified for the DNS 

RAC name 

IPv4 is Disabled so cannot enable 

attribute 

Job Control Failed to Create a Job 

No Pending Configurations 

No pending configurations to delete. 

Unable to perform the operation due 

to an unknown error in iDRAC. 


. 

Missing parameters . 

The set operation on the event filters 

failed. 


Target 


Target 

56 Version 1.3.0


RAC042 

RAC043 

RAC044 

RAC045 

RAC046 

RAC047 

RAC048 

RAC049 

RAC050 

RAC051 

RAC053 

JCP017 

JCP018 

JCP019 

LIC502 

LIC503 

LC062 

Invalid number of input parameters. 

Unable to update some event filter 

settings. 


settings. 

Event filter does not exist for input 

parameter combination. 

Unsupported event notification for the 

event filter specified. 

Unsupported event action for the 

specified event filter. 

The operation was successful. 

Resource allocation failure. 

Invalid country code 

Unsupported parameter name 

 

OS to iDRAC pass-through is disabled. 

Job creation request unsuccessful. 

Maximum number of jobs reached. 

Cannot create new jobs until the 

existing Export job is completed or 

the job is cancelled. 


existing Import System Profile job is 

completed or cancelled. 

Feature(s) not available. 

A required license is missing or 

expired. The following features are 

not enabled: 

An instance of Export or Import 

System Configuration is already 

running. 

1243 

1244 

1245 

1246 

1247 

1248 

1249 

1250 

1251 

1252 

1253 

8.2 DCIM_iDRACCardService.SetAttributes( ) 

The SetAttributes( ) method is used to set or change the values of a group of attributes. 

Invocation of the SetAttributes( ) method shall change the values of the 

DCIM_IDRACCardAttribute.CurrentValue or PendingValue properties that correspond to the names 

specified by the AttributeName parameter and the values specified by the AttributeValue parameter if the 

respective DCIM_IDRACCardAttribute.IsReadOnly property is FALSE. Invocation of this method when 

the respective DCIM_IDRACCardAttribute.IsReadOnly property is TRUE shall result in no change to the 

corresponding value of the DCIM_IDRACCardAttribute.CurrentValue property. 

NOTE: If setting numerous attributes at the same time, please make sure that WSMAN client has a timeout of at 

least 120 seconds. 

Version 1.3.0 57

1254 

1255 

1256 

1257 

1258 

Return code values for the SetAttributes( ) method are specified in Table 96, and parameters are 

specified in Table 97. 

Invoking the SetAttributes( ) method multiple times can result in the earlier requests being overwritten or 

lost. 

Table 96 – SetAttributes( ) Method: Return Code Values 

Value 

Description 

0 Completed with no error 

2 Failed 

1259 

Table 97 – SetAttributes( ) Method: Parameters 



IN, REQ AttributeName[] String An array of values where each value shall be 

formatted in the following way: 

#. 


IN, REQ AttributeValue[] String Shall contain the desired attribute values. Array 

attributes shall not be set using this method. 

If the value is valid, the CurrentValue or 

PendingValue property of the specified attribute 

will be modified. 

OUT SetResult[] String Returns: 

" Set CurrentValue" when the attributes 

current value is set. 

“Set PendingValue” when the attributes 

pending value is set. 

OUT RebootRequired[] String Returns: 

“Yes” if reboot is required, 

“No” if reboot is not required. 

OUT MessageID[] String Error Message ID may be used to look-up in the 

Dell Message registry files. For more information, 

see Error Message Registry. 

OUT Message[] String Error Message in English corresponding to 

MessageID is returned if the method fails to 

execute 


1260 

1261 

Table 98 – SetAttributes( ) Method: Standard Messages 


RAC001 

RAC002 

RAC003 




 


Target 

RAC004 Invalid parameter value for AttributeName, AttributeValue, 

58 Version 1.3.0


RAC005 

RAC006 

RAC007 

RAC008 

RAC009 

RAC010 

RAC011 

RAC012 

RAC013 

RAC014 

RAC015 

RAC016 

RAC017 

RAC018 

RAC019 

RAC020 

RAC021 

RAC022 

RAC023 

RAC024 

RAC025 

RAC026 

RAC027 

RAC028 

RAC029 

RAC030 

 










more Sets 


operation 

Invalid FQDD 



AttributeName 



value 



Completed 



or Gateway 










VLAN Priority 







Duplex 



DNS From DHCP 


input 


Target 

AttributeName 

Version 1.3.0 59



RAC031 

RAC032 

RAC033 

RAC034 

RAC035 

RAC037 

RAC038 

RAC039 

RAC040 


name 


RAC name 


attribute 







. 



Target 


Target 

RAC041 

RAC042 

RAC043 

RAC044 

RAC045 

RAC046 

RAC047 

RAC048 

RAC049 

RAC050 

RAC051 

RAC053 

JCP017 

JCP018 

JCP019 

LIC502 


failed. 



settings. 


settings. 











 

OS to iDRAC pass-through is 

disabled. 










60 Version 1.3.0


LIC503 

LC062 



not enabled: 



running. 

1262 

1263 

1264 

1265 

1266 

1267 

1268 

1269 

1270 

1271 

1272 

1273 

1274 

1275 

1276 

1277 

1278 

1279 

1280 

1281 

1282 

1283 

8.3 DCIM_iDRACCardService.CreateTargetedConfigJob( ) 

The CreateTargetedConfigJob( ) method is used to apply the pending values created by the SetAttribute 

and SetAttributes methods. The successful execution of this method creates a job to apply the pending 

attribute values. 

The CreateTargetedConfigJob() method supports the following optional input parameters: 

1. ScheduledStartTime: When provided in the input parameters, schedules the “configuration job” 

and the optional “reboot job” at the specified start time. A special value of “TIME_NOW” 

schedules the job(s) immediately. 

2. UntilTime: This parameter has a dependency on “ScheduledStartTime”. The 

“ScheduledStartTime” and “UntilTime” define a time window for scheduling the job(s). Once 

scheduled, jobs are executed within the time window. 

If CreateTargetedConfigJob() method is executed without the three optional parameters discussed above, 

then the configuration job is created but not scheduled. However, this configuration job can be scheduled 

later using the DCIM_JobService.SetupJobQueue() method from the “Job Control Profile”. 

DCIM_JobService.SetupJobQueue () can be executed to schedule several configuration jobs including 

the reboot job. See the “Job Control Profile” for more details. 

Return code values for the CreateTargetedConfigJob() method are specified in Table 99, and parameters 

are specified in Table 100. 

Subsequent calls to CreateTargetedConfigJob after the first CreateTargetedConfigJob results in error 

until the first job is completed. 

Table 99 – CreateTargetedConfigJob( ) Method: Return Code Values 

Value 

Description 

2 Failed 

4096 Job Created 

1284 

Table 100 – CreateTargetedConfigJob( ) Method: Parameters 



IN ScheduledStartTime String Start time for the job execution in format: 

yyyymmddhhmmss. 

The string "TIME_NOW" means immediate. 

Version 1.3.0 61


IN UntilTime String End time for the job execution in format: 

yyyymmddhhmmss. 

If this parameter is not NULL, then 

ScheduledStartTime parameter shall also be 

specified. 

OUT Job CIM_ConcreteJob 

REF 

Reference to the newly created pending value 

application job. 

OUT MessageID String Error Message ID may be used to look-up in the 



OUT Message String Job Completed Error Message in English 

OUT MessageArguments[] String Substitution variables for dynamic error message. 

1285 

Table 101 – CreateTargetedConfigJob( ) Method: Standard Messages 


RAC001 

RAC002 

RAC003 

RAC004 

RAC005 

RAC006 

RAC007 

RAC008 

RAC009 

RAC010 

RAC011 

RAC012 

RAC013 

RAC014 

RAC015 

RAC016 

RAC017 

RAC018 

RAC019 

RAC020 

RAC021 

RAC022 




 


 










more Sets 


operation 

Invalid FQDD 



AttributeName 



value 



Completed 



or Gateway 



Target 


Target 

AttributeName 

62 Version 1.3.0


RAC023 

RAC024 

RAC025 

RAC026 

RAC027 

RAC028 

RAC029 

RAC030 

RAC031 

RAC032 

RAC033 

RAC034 

RAC035 

RAC037 

RAC038 

RAC039 

RAC040 









VLAN Priority 







Duplex 



DNS From DHCP 


input 




name 


RAC name 


attribute 







. 



Target 


Target 

RAC041 

RAC042 

RAC043 

RAC044 

RAC045 

RAC046 


failed. 



settings. 


settings. 





Version 1.3.0 63


RAC047 

RAC048 

RAC049 

RAC050 

RAC051 

JCP017 

JCP018 

JCP019 

LIC502 

LIC503 

LC062 







 












not enabled: 



running. 

1286 

1287 

1288 

1289 

1290 

1291 

1292 

1293 

1294 

1295 

1296 

1297 

8.4 DCIM_iDRACCardService.DeletePendingConfiguration( ) 

The DeletePendingConfiguration( ) method is used to cancel the pending values created by the 

SetAttribute and SetAttributes methods. The DeletePendingConfiguration( ) method cancels the pending 

configuration changes made before the configuration job is created with CreateTargetedConfigJob(). This 

method only operates on the pending changes prior to CreateTargetedConfigJob() being called. After the 

configuration job is created, the pending changes can only be canceled by calling DeleteJobQueue() 

method in the Job Control profile. 

Return code values for the DeletePendingConfiguration( ) method are specified in Table 102 , and 

parameters are specified in Table 103. 

Table 102 – DeletePendingConfiguration( ) Method: Return Code Values 

Value 

Description 

0 Success 

2 Failed 

1298 

1299 

64 Version 1.3.0

1300 

Table 103 – DeletePendingConfiguration( ) Method: Parameters 






OUT Message String Error Message in English corresponding to 

MessageID is returned if the method fails to 

execute 


1301 

Table 104 – DeletePendingConfiguration( ) Method: Standard Messages 


RAC001 

RAC002 

RAC003 

RAC004 

RAC005 

RAC006 

RAC007 

RAC008 

RAC009 

RAC010 

RAC011 

RAC012 

RAC013 

RAC014 

RAC015 

RAC016 

RAC017 

RAC018 

RAC019 

RAC020 

RAC021 

RAC022 




 


 










more Sets 


operation 

Invalid FQDD 



AttributeName 



value 



Completed 



or Gateway 






Target 


Target 

AttributeName 

Version 1.3.0 65


RAC023 

RAC024 

RAC025 

RAC026 

RAC027 

RAC028 

RAC029 

RAC030 

RAC031 

RAC032 

RAC033 

RAC034 

RAC035 

RAC037 

RAC038 

RAC039 

RAC040 

RAC041 

RAC042 

RAC043 

RAC044 

RAC045 

RAC046 

RAC047 






VLAN Priority 







Duplex 



DNS From DHCP 


input 




name 


RAC name 


attribute 







. 



failed. 



settings. 


settings. 








Target 


Target 

66 Version 1.3.0


RAC048 

RAC049 

RAC050 

RAC051 

JCP017 

JCP018 

JCP019 

LIC502 

LIC503 

LC062 





 












not enabled: 



running. 

1302 

1303 

Version 1.3.0 67

1304 

1305 

1306 

1307 

1308 

1309 

8.5 DCIM_iDRACCardService.ApplyAttributes() 

The ApplyAttributes() method is used to set or change the value of a iDRAC Card attribute. 

NOTE: If setting numerous attributes at the same time, please make sure that WSMAN client has a timeout of at 

least 120 seconds. 

Table 105 – ApplyAttributes() Method: Return Code Values 

Value 

Description 

2 Error 

4096 Job Created 

1310 

Table 106 – ApplyAttributes() Method: Parameters 



IN, REQ AttributeName[] String 

IN, REQ AttributeValue[] String 

OUT Job CIM_ConcreteJob 

REF 

An array of values, where each value shall be 

formatted in the following way: 

#. 


Shall contain the desired attribute values. 

If the value is valid, the CurrentValue or 

PendingValue property of the specified attribute 

will be modified. 

Returned to keep track of concrete job status 

OUT MessageID[] String Error message IDs may be used to look-up in the 



OUT Message[] String Error messages in English corresponding to 

MessageID is returned if an attribute set fails 

1311 

Table 107 – ApplyAttributes( ) Method: Standard Messages 


RAC001 

RAC002 

RAC003 

RAC004 

RAC005 

RAC006 

RAC007 

RAC008 

RAC009 

The command was succesful 


Missing required 


 







String Exceeds max length 


Target 


Target 

68 Version 1.3.0


RAC010 

RAC011 

RAC012 

RAC013 

RAC014 

RAC015 


Job already exists, cannot process 

more sets 

User is not authorized to perform this 

operation 

Invalid FQDD 

Invalid attribute was entered 

Not one of the possible values for 

AttributeName 

AttributeName 

RAC016 Invalid AttributeName %s AttributeName 

RAC017 

RAC018 

RAC019 

RAC020 

RAC021 

RAC022 

RAC023 

RAC024 

RAC025 

RAC026 

RAC027 

RAC028 

RAC029 

RAC030 

RAC031 

RAC032 

RAC033 

RAC034 

RAC035 


value 

Completed with errors 

Failed 

Completed 

DHCP is enabled. Therefore, cannot 

set static values for IPAddress Net 

mask or Gateway. 




IPMISerial or User Admin Privilege. 

The User Password is not 

configured, cannot Enable the User 

or set values for IPMILan IPMISerial 

or User Admin Privilege. 

VLAN is disabled, cannot set VLAN 

Priority 

DNS from DHCP is Enabled, cannot 

set values for DNS1 or DNS2 

Domain Name from DHCP Enabled, 

cannot set DNS Domain Name 

Auto negotiation is Enabled, cannot 

set values for Speed or Duplex 

DHCP is Disabled, cannot Enable 


DNS From DHCP 


input 

Required Attribute that this attribute 


Invalid value specified for the User 

name 

Invalid value specified for the DNS 

RAC name 


attribute 

Job Control failed to create a job 

No pending configurations 

Version 1.3.0 69


RAC037 

RAC038 

Attribute dependency failed 

The command failed 

RAC039 Invalid parameter value for %s 

RAC040 Missing parameter(s) %s 

RAC053 

JCP017 

JCP018 

JCP019 

OS to iDRAC pass-through is 

disabled. 

Maximum job limit reached, cannot 

create new jobs 

Backup job is running, cannot create 

new jobs until the existing backup job 

is completed or is cancelled. 

Restore job is running, cannot create 

new jobs until the existing restore job 

is completed or is cancelled. 


Target 


Target 

LC062 



running. 

1312 

1313 

1314 

1315 

1316 

8.6 DCIM_iDRACCardService.SendTestEmailAlert( ) 

This method is used to to send a test email alert for a particular attribute. 

Return code values for the SendTestEmailAlert( )method are specified in Table 108, and parameters are 


Table 108 – SendTestEmailAlert( ) Method: Return Code Values 

Value 

Description 

0 Completed with No Error 

2 Failed 

1317 

Table 109 – SendTestEmailAlert ( ) Method: Parameters 


IN, REQ InstanceID String The property shall have the value of the 

InstanceID property of the attribute for which the 

test email alert is generated. 




OUT Message String Error Message in English 


1318 

Table 110 – SendTestEmailAlert ( ) Method: Standard Messages 


RAC001 


70 Version 1.3.0


RAC002 

RAC003 

RAC004 

RAC005 

RAC006 

RAC007 

RAC008 

RAC009 

RAC010 

RAC012 

RAC013 

RAC014 

RAC015 

RAC016 

RAC018 

RAC020 

RAC021 

RAC022 

RAC023 

RAC024 

RAC025 

RAC026 

RAC027 

RAC028 

RAC029 

RAC030 



 


 










operation 

Invalid FQDD 



AttributeName 



Completed 



or Gateway 










VLAN Priority 







Duplex 



DNS From DHCP 


input 




Target 


Target 

AttributeName 

Version 1.3.0 71


RAC031 

RAC032 

RAC033 

RAC035 

RAC037 

RAC038 

RAC039 

RAC040 

RAC041 

RAC042 

RAC043 

RAC044 

RAC045 

RAC046 

RAC047 

RAC048 

RAC049 

RAC050 

RAC051 

LIC502 

LIC503 


name 


RAC name 


attribute 






. 



failed. 



settings. 


settings. 











 




not enabled: 


Target 


Target 

1319 

1320 

1321 

1322 

1323 

8.7 DCIM_iDRACCardService.SendTestSNMPTrap() 

This method is used to to send a test snmp alert for a particular attribute. 

Return code values for the SendTestSNMPTrap() method are specified in Table 111, and parameters are 


72 Version 1.3.0

1324 

Table 111 – SendTestSNMPTrap( ) Method: Return Code Values 

Value 

Description 

0 Completed with No Error 

2 Failed 

1325 

Table 112 – SendTestSNMPTrap( ) Method: Parameters 


IN, REQ InstanceID String The property shall have the value of the 

InstanceID property of the attribute for which the 

test email alert is generated. 




OUT Message String Error Message in English 


1326 

Table 113 – SendTestSNMPTrap() Method: Standard Messages 


RAC001 

RAC002 

RAC003 

RAC004 

RAC005 

RAC006 

RAC007 

RAC008 

RAC009 

RAC010 

RAC012 

RAC013 

RAC014 

RAC015 

RAC016 

RAC018 

RAC020 

RAC021 

RAC022 




 


 










operation 

Invalid FQDD 



AttributeName 



Completed 



or Gateway 





Target 


Target 

AttributeName 

Version 1.3.0 73


RAC023 

RAC024 

RAC025 

RAC026 

RAC027 

RAC028 

RAC029 

RAC030 

RAC031 

RAC032 

RAC033 

RAC035 

RAC037 

RAC038 

RAC039 

RAC040 







VLAN Priority 







Duplex 



DNS From DHCP 


input 




name 


RAC name 


attribute 






. 



Target 


Target 

RAC041 

RAC042 

RAC043 

RAC044 

RAC045 

RAC046 

RAC047 


failed. 



settings. 


settings. 







74 Version 1.3.0


RAC048 

RAC049 

RAC050 

RAC051 

LIC502 

LIC503 





 




not enabled: 

1327 

1328 

1329 

1330 

9 Use Cases 

See Lifecycle Controller (LC) Integration Best Practices Guide. 

1331 

1332 

1333 

10 CIM Elements 

No additional details specified. 

1334 

1335 

1336 

11 Privilege and License Requirement 

The following table describes the privilege and license requirements for the listed operations. 

Table 114 – Privilege and License Requirements 

Class and Method 

Instance 

(GroupID.Attribute 

Name) 

Operation 

Required 

User 

Privilege 

Required License 

Version 1.3.0 75


DCIM_iDRACCardView 

DCIM_iDRACCardService 

DCIM_iDRACCardService. 

ApplyAttributes() 


SetAttribute() 


SetAttributes() 

Instance 


Name) 

Operation 

Required 

User 

Privilege 

ENUMERA 

TE, GET Login None. 

ENUMERA 


INVOKE 

INVOKE 

INVOKE 


SetAttribute(); 


SetAttributes(); 


ApplyAttributes() Users.UserName INVOKE 






ApplyAttributes() Users.Password INVOKE 






ApplyAttributes() Users.IpmiLanPrivilege INVOKE 






ApplyAttributes() 

Users.IpmiSerialPrivile 

ge 

INVOKE 






ApplyAttributes() Users.Enable INVOKE 






ApplyAttributes() Users.SolEnable INVOKE 

Login, 

System 

Control 

Login, 

System 

Control 

Login, 

System 

Control 

Login, 

System 

Control, 

Configure 

Users 

Login, 

System 

Control, 

Configure 

Users 

Login, 

System 

Control, 

Configure 

Users 

Login, 

System 

Control, 

Configure 

Users 

Login, 

System 

Control, 

Configure 

Users 

Login, 

System 

Control, 

Configure 

Users 


LM_REMOTE_CONFI 

GURATION & one of 

the below if shown 








GURATION 


GURATION 


GURATION 


GURATION 


GURATION 


GURATION 

76 Version 1.3.0


Instance 


Name) 

Operation 






ApplyAttributes() Users.Privilege INVOKE 


CreateTargetedConfigJob() 


DeletePendingConfiguration() 


SendTestEmailAlert() 


SendTestSNMPTrap() 

DCIM_LCElementConformsToPro 

file 

DCIM_LCRegisteredProfile 














NIC.DNSRegister 

NIC.DNSRacName 

NIC.AutoDetect 

NIC. 

DedicatedNICScanTim 

e 

NIC. 

SharedNICScanTime 

IPv6.DNSFromDHCP6 

IPv6.DNS1 

IPv6.DNS2 

IPv6.Enable 

IPv6.AutoConfig 

INVOKE 

INVOKE 

INVOKE 

INVOKE 

Required 

User 

Privilege 

Login, 

System 

Control, 

Configure 

Users 

Login, 

System 

Control 

Login, 

System 

Control 

Login, 

System 

Operations 

Login, 

System 

Operations 

ENUMERA 


ENUMERA 


ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

Login 

Login 

Login 



GURATION 


GURATION 


GURATION 


GURATION & 

LM_EMAIL_ALERTIN 

G 


GURATION & 

LM_SNMP 

None, unless shown 

below 


below 


below 

ENUMERA 

TE, GET Login LM_DYNAMIC_DNS 

ENUMERA 

TE, GET Login LM_DYNAMIC_DNS 

ENUMERA 

TION,GET Login LM_DEDICATED_NIC 

ENUMERA 


ENUMERA 


ENUMERA 

TE, GET Login LM_IPV6 

ENUMERA 


ENUMERA 


ENUMERA 


ENUMERA 


Version 1.3.0 77


























Instance 


Name) 

IPv6.Address1 

IPv6.Gateway 

IPv6.LinkLocalAddress 

IPv6.PrefixLength 

IPv6.Address2 

IPv6.IPv6NumOfExtAd 

dress 

IPv6.Address3 

IPv6.Address4 

IPv6.Address5 

IPv6.Address6 

IPv6.Address7 

IPv6.Address8 

IPv6.Address9 

IPv6.Address10 







IPv6Static.Address1 

IPv6Static.Gateway 

IPv6Static.DNS1 

IPv6Static.DNS2 

Operation 

Required 

User 

Privilege 

ENUMERA 


ENUMERA 


ENUMERA 

TE, GET E Login LM_IPV6 

ENUMERA 


ENUMERA 


ENUMERA 


ENUMERA 


ENUMERA 


ENUMERA 


ENUMERA 


ENUMERA 


ENUMERA 


ENUMERA 


ENUMERA 


ENUMERA 


ENUMERA 


ENUMERA 


ENUMERA 


ENUMERA 


ENUMERA 


ENUMERA 


ENUMERA 


ENUMERA 


ENUMERA 



78 Version 1.3.0


























Instance 


Name) 

IPv6Static.Prefix 

SNMPTrapIpv6.Destin 

ationNum 

SNMPTrapIpv6.State 

SNMPTrapIpv6.DestIP 

v6Addr 

EmailAlert.Enable 

EmailAlert.Address 

EmailAlert.CustomMsg 

SNMP.AgentEnable 

SNMP.TrapFormat 

SNMP.AgentCommunit 

y 

IPBlocking.RangeEnab 

le 

IPBlocking.RangeAddr 

IPBlocking.RangeMask 

IPBlocking.BlockEnabl 

e 

IPBlocking.FailCount 

IPBlocking.FailWindow 

IPBlocking.PenaltyTim 

e 

SysLog.SyslogEnable 

SysLog.Port 

SysLog.Server1 



Users.UserName 

Users.Password 

Operation 

Required 

User 

Privilege 

ENUMERA 



ENUMERA 

TE, GET Login LM_IPV6 & LM_SNMP 

ENUMERA 


ENUMERA 


ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

Login 

Login 

Login 


G 


G 


G 

ENUMERA 

TE, GET Login LM_SNMP 

ENUMERA 


ENUMERA 


ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

Login 

Login 

Login 

Login 

Login 

Login 

Login 

Login 

Login 

Login 

Login 

Login 

Login 

Login 

LM_SECURITY_LOCK 

OUT 


OUT 


OUT 


OUT 


OUT 


OUT 


OUT 

LM_REMOTE_SYSLO 

G 


G 


G 


G 


G 


GURATION 


GURATION 

Version 1.3.0 79



Instance 


Name) 

Users.IpmiLanPrivilege 

Operation 

ENUMERA 

TE, GET 

Required 

User 

Privilege 

Login 



GURATION 



Users.IpmiSerialPrivile 

ge 

Users.Enable 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

Login 

Login 


GURATION 


GURATION 


Users.SolEnable 

ENUMERA 

TE, GET 

Login 


GURATION 


Users.Privilege 

ENUMERA 

TE, GET 

Login 


GURATION 



Users.AuthenticationPr 

otocol 

Users. ProtocolEnable 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

Login 

Login 


GURATION 


GURATION 


Users. PrivacyProtocol 

ENUMERA 

TE, GET 

Login 


GURATION 


AD.Enable 

ENUMERA 

TE, GET 

Login 

LM_DIRECTORY_SE 

RVICES 


AD.RacName 

ENUMERA 

TE, GET 

Login 


RVICES 


AD.RacDomain 

ENUMERA 

TE, GET 

Login 


RVICES 


AD.AuthTimeout 

ENUMERA 

TE, GET 

Login 


RVICES 


AD.Schema 

ENUMERA 

TE, GET 

Login 


RVICES 


AD.DomainController1 

ENUMERA 

TE, GET 

Login 


RVICES 



ENUMERA 

TE, GET 

Login 


RVICES 



ENUMERA 

TE, GET 

Login 


RVICES 


AD.GlobalCatalog1 

ENUMERA 

TE, GET 

Login 


RVICES 



ENUMERA 

TE, GET 

Login 


RVICES 



ENUMERA 

TE, GET 

Login 


RVICES 


AD.CertValidationEnab 

le 

ENUMERA 

TE, GET 

Login 


RVICES 


AD.SSOEnable 

ENUMERA 

TE, GET 

Login 


RVICES 


AD.DCLookupEnable 

ENUMERA 

TE, GET 

Login 


RVICES 


AD.DCLookupByUser 

Domain 

ENUMERA 

TE, GET 

Login 


RVICES 


AD.DCLookupDomain 

Name 

ENUMERA 

TE, GET 

Login 


RVICES 

80 Version 1.3.0


























Instance 


Name) 

AD.GCLookupEnable 

AD.GCRootDomain 

LDAP.Enable 

LDAP.Server 

LDAP.Port 

LDAP.BaseDN 

LDAP.UserAttribute 

LDAP.GroupAttribute 

LDAP.GroupAttributeIs 

DN 

LDAP.BindDN 

LDAP.BindPassword 

LDAP.SearchFilter 

LDAP.CertValidationE 

nable 

LDAPRoleGroup.DN 

LDAPRoleGroup.Privil 

ege 

SmartCard.SmartCard 

LogonEnable 

SmartCard.SmartCard 

CRLEnable 

VirtualMedia.Attached 

VirtualMedia.BootOnce 

VirtualMedia.FloppyEm 

ulation 

VirtualMedia.Encryptio 

nEnable 

VirtualConsole.Enable 

VirtualConsole.Encrypt 

Enable 

VirtualConsole.LocalVi 

deo 

Operation 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

ENUMERA 

TE, GET 

Required 

User 

Privilege 

Login 

Login 

Login 

Login 

Login 

Login 

Login 

Login 

Login 

Login 

Login 

Login 

Login 

Login 

Login 

Login 

Login 



RVICES 


RVICES 


RVICES 


RVICES 


RVICES 


RVICES 


RVICES 


RVICES 


RVICES 


RVICES 


RVICES 


RVICES 


RVICES 


RVICES 


RVICES 

LM_TWO_FACTOR_A 

UTHEN 

LM_TWO_FACTOR_A 

UTHEN 

ENUMERA 

TE, GET Login LM_VMEDIA 

ENUMERA 


ENUMERA 


ENUMERA 


ENUMERA 

TE, GET Login LM_VCONSOLE 

ENUMERA 


ENUMERA 


Version 1.3.0 81






Instance 


Name) 

VirtualConsole.PluginT 

ype 

VirtualConsole.MaxSe 

ssions 

VirtualConsole.Port 

VirtualConsole.Timeou 

t 

Operation 

Required 

User 

Privilege 


ENUMERA 


ENUMERA 


ENUMERA 


ENUMERA 


82 Version 1.3.0

1337 

1338 

1339 

1340 

1341 

1342 

1343 

1344 

ANNEX A 

(Informative) 

Privilege Information 

The following annex describes the mapping for iDRAC privileges. The integer value returned for the 

privilige represents a bit mask, where each bit represents a specific privilege. If a particular bit is set, then 

the corresponding privilege exists. Table 115 represents the bitmask mapping to the iDRAC privileges. 

Table 115 – Privilege Bit Mask 

Bit 

Privilege 

1 Login 

2 Configure 

3 Configure Users 

4 Logs 

5 System Control 

6 Access Virtual Console 

7 Access Virtual Media 

8 System Operations 

9 Debug 

1345 

1346 

1347 

1348 

1349 

1350 

1351 

1352 

1353 

1354 

1355 

1356 

1357 

1358 

1359 

1360 

1361 

For example, a privilige value equal to decimal 91 can be arithmetically decoded into the appropriate 

privileges: 

91 mod 2 = 1, then Login privilege exists. 

91 div 2 = 45, 45 mod 2 = 1, then Configure privilege exists . 

45 div 2 = 22, 22 mod 2 = 0, then Configure Users privilege does not exist. 

22 div 2 = 11, 11 mod 2 = 1, then Logs privilege exists. 

11 div 2 = 5, 5 mod 2 = 1, then System Control privilege exists. 

5 div 2 = 2, 2 mod 2 = 0, then Access Virtual Console privilege does not exist. 

2 div 2 = 1, 1 mod 2 = 1, then Access Virtual Media privilege exists. 

The same privilege value of decimal 91 can be decoded through binary operations: 

91 and 1 = 1, then Login privilege exists. 

91 and 2 = 2, then Configure privilege exists. 

91 and 4 = 0, then Configure Users privilege does not exist. 

91 and 8 = 8, then Logs privilege exists. 

91 and 16 =16, then System Control privilege exists. 

91 and 32 = 0, then Access Virtual Console privilege does not exists. 

91 and 64 = 64, then Access Virtual Media privilege exists. 

1362 

Version 1.3.0 83

1363 

1364 

1365 

1366 

1367 

ANNEX B 

(informative) 

Change Log 

Version Date Description 

1.3.0 Added IPv4 Static Information and IPv6 Static Information attribute 

groups. 

Added Default Credential Mitigation Configuration attribute group. 

Added LC062 error message to the SetAttribute(), SetAttributes(), 

CreateTargetedConfigJob(), DeletePendingConfiguration(), and 

ApplyAttributes() methods. 

Replaced SNMP Trap IPv4 and SNMP Trap IPv6 with generic SNMP 

Trap Destination attribute group that takes both IPv4 and IPv6 

addresses as well as FQDNs. 

1.3.0 6/25/2012 Corrected “Default Credential Mitigation Configuration”. 

1368 

1369 

1370 

84 Version 1.3.0

Dell iDRAC Card Profile - Dell Community

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?