General Catalogue RITMO - KIV Marketing Corporation

More documents

Recommendations

Info

MUSTANG 160 S MUSTANG 160 S This electrofusion machine is suitable for welding electrical couplers in Polyethylene (PE) from Ø 32 to Ø 160 mm, for low-pressure conduits. The MUSTANG 160 S is made in compliance with the current safety standards and Directives. This welding machine’s structure is lightweight, so it is extremely easy to carry around. It is distinguished by the automatic setting of the welding parameters, by the self-compensation of the current supplied (according to the ambient temperature) and by the self-diagnosis, in the event of any malfunction that could occur before or during welding. The machine features cables with pins, a transport bag and a manual scraper, most useful to remove the layer of oxidation from the pipe (which could undermine the good result of the welding). Machine body SUPPLIED WITH - Welding machine complete with cables with pins, Trevira bag and manual scraper (see page 96). ELECTROFUSION MACHINES - LOWER PRESSURE FITTINGS - Transport bag Manual scraper TECHNICAL FEATURES Working range Electrical couplers brands (low pressure HDPE) Power supply Maximum output current Maximum absorbed power Outside temperature range Temperature compensation Dimensions (W x D x H) Weight 32 ÷ 160 mm Akatherm-Euro, Co.e.s., Geberit, Valsir, Wavin (Waviduo) 230 V - Single phase - 50/60 Hz 5 A 900 W -5 ÷ +40°C Automatic electronic 300 x 120 x 280 mm 3,00 Kg 78
UNIVERSAL This electrofusion machine is suitable for welding electrical couplers in Polyethylene (PE) from Ø 32 mm to Ø 315 mm, for low pressure conduits. The UNIVERSAL is made in compliance with the current safety standards and Directives. This welding machine’s structure is lightweight, so it is extremely easy to carry around. It is controlled by a microprocessor that allows the recognition of four different types of cable with pins, identified by a code (written on each one of them), which the operator can confirm by looking at the display. The different cables are necessary to adapt to the different kinds of electrical coupler available in the market. The main features include self-compensation of the current supplied (according to the ambient temperature) and self-diagnosis of any malfunction that could occur before or during welding. UNIVERSAL The machine features four cables with pins, a transport bag and a manual scraper, most useful to remove the layer of oxidation from the pipe (which could undermine the good result of the welding). Machine body SUPPLIED WITH - Welding machine complete with four cables with pins, Trevira bag and manual scraper (see page 96). TECHNICAL FEATURES Working range – (1) Electrical couplers brands (low pressure HDPE) Working range – (2) Electrical couplers brands (low pressure HDPE) Power supply Maximum output current Maximum absorbed power Outside temperature range Temperature compensation Dimensions (W x D x H) Weight Ø 32 ÷ 160 mm Akatherm-Euro, Co.e.s., Geberit, Valsir, Wavin (Wavisolo & Waviduo) Ø 200 ÷ 315 mm Akatherm-Euro, Geberit, Valsir, Wavin (Wavisolo) 230 V-Single phase-50/60 Hz 10,7 A 2500 W -5 ÷ +40°C Automatic electronic 245 x 210 x 280 mm 3,90 Kg Cables with pins ELECTROFUSION MACHINES - LOWER PRESSURE FITTINGS - Manual scraper 79
Page 1: ELECTROFUSION MACHINES LOW PRESSURE
Page 5: TECHNICAL FEATURES Working range El
Page 9: BRAND MODEL MUSTANG 160 UNIVERSAL T

General Catalogue RITMO - KIV Marketing Corporation

Create successful ePaper yourself

Delete template?

Save as template?