Zebra® TLP 2844 Desktop Printer - Agbit Computer Systems
Zebra® TLP 2844 Desktop Printer - Agbit Computer Systems
Zebra® TLP 2844 Desktop Printer - Agbit Computer Systems
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Media Length Sensing<br />
MOVIE<br />
Before you connect the printer to your computer, make sure that the printer<br />
is in proper working order. You can do this by making the printer measure<br />
media and print a status printout.<br />
After loading media, perform the<br />
following procedure that measures the<br />
length of each label or tag. Make sure the<br />
top cover of the printer is closed.<br />
1. Make sure that printer power is off.<br />
2. Press and hold the feed button.<br />
3. Turn printer power on.<br />
4. When the status light blinks, release<br />
the feed button.<br />
UKQ2933H U V4.28.19<br />
Serial port : 96,N,8,1<br />
Image buffer size: 1032K<br />
Fmem:000,0K,060.9K avl<br />
Gmem:000K,0331K avl<br />
Emem:000K,0331K avl<br />
I8,0,001 rY JF WY<br />
S2 D07 R0 24,000 ZT UN<br />
q1200 Q 1500,036<br />
Option:<br />
oRO<br />
06 10 16<br />
now in DUMP<br />
5. The printer advances the media to<br />
measure and verify the length of<br />
individual labels or tags. The printer<br />
then prints a status summary and<br />
remains in diagnostic dump mode.<br />
6. To begin normal operation, tap the<br />
feed button. The printer prints "out of<br />
DUMP" and advances a label.<br />
If the status light remains amber or red or<br />
you cannot get this printout, refer to<br />
Troubleshooting on page 35.<br />
out of DUMP<br />
14 980487-001A
Change language