Zeta - Meta-Mak

Contrôle
Mesure
NON DESTRUCTIVE TESTING
WITH EDDY CURRENT
Systèmes
ZET@ MASTER
ZET@ PREMIUM
For automatic on line inspection of tubes, pipes,
bars, wires, cables, forged parts and all the
metallic parts in the industry (Automotive,
Aircraft, Iron and steel industry…).
Multi channels inspection for the Zet@
Master (up to 256 probes)
Remote control for maintenance through the
network
Control of all peripheral devices
Flexible configuration for matching all the
varieties of the production lines.
Stand alone, self contained equipment.
Process parameter control
Hot Rod inspection (up to 1200 ° C)
Measurement of surface hardness, structure
and case depth
EDDYSCAN 30 X
The most versatile solution for today’s
eddy current testing installations
Up to 16 channels
Dedicated software for all kind of
applications
Control of peripheral devices
PRODUCTION SOFTWARE
ZET@ MICRO
The most economical solution for
today’s eddy current testing
installation requiring the latest and
most innovative technology
1 or 2 channels
with or without removable interface
Control of peripheral devices
ZET@ MICRO

MAGNETIZING AND DEMAGNETIZING UNITS
For the inspection of ferromagnetic products
Encircling and sector magnetizing units of 6
different sizes from 0,5 to 230 mm
Full accessories, paint marker, encoder, table
support, rotating disk, rotating probe gun…
EDDY CURRENT SENSORS
AND ACCESSORIES
Standard encircling coils, probes and ID
probes
Study and manufacturing of special
sensors
ROTATING SYSTEM
For high speed inspection of longitudinal defects
6 different sizes from 2 to 220 mm diameter
SOME APPLICATIONS
Defect detection on aluminum plates suitable
in all metallic conducting plates at 2 m/s
Multi wire inspection
with only 1 equipment
Contrôle Mesure Systèmes–1 Chemin des Bruyères–F 71100 La Charmée–Tel : +33 3 85 94 14 14–Fax : +33 3 85 94 14 15
web Site : cmseddyscan.com – e-mail : contactcms@ cmseddyscan.com
These informations are subject to change without prior notice. General Ed. 04/06