WHO WE ARE AND WHAT WE SELL - Denver Petroleum

Recommendations

Info

Liquid <strong>Petroleum</strong> Gas (LPG) Autogas dispensers - Hi-Light dispenser Mechanical specifications �� Dimensions: L: 90.5 cm, W: 50 cm, H: 159 cm �� Connection sizes: Liquid inlet ¾” NPT �� Vapor return line ¾” NPT �� Recommended flow range: 6 – 60 lpm �� Maximum working pressure: 25 Bar �� Safety relief valve opening pressure: 14 Bar �� Recommended operational temperature: -40°C to +60°C �� Overall accuracy: ± 0.5% �� Packaged weight: 1-nozzle (approximately) 295 kg 2-nozzle (approximately) 390 kg Autogas dispensers - H-style dispenser Mechanical specifications �� Dimensions: L: 100 cm, W: 50 cm, H: 180 cm �� Connection sizes: Liquid inlet ¾” NPT �� Vapor return line ¾” NPT �� Recommended flow range: 6 – 60 lpm �� Maximum working pressure: 25 Bar �� Safety relief valve opening pressure: 14 Bar �� Recommended operational temperature: -40°C to +60°C �� Overall accuracy: ± 0.5% �� Packaged weight: 1-nozzle (approximately) 256 kg. 2-nozzle (approximately) 340 kg. Autogas dispensers - XT-style dispenser Mechanical specifications �� Dimensions: L: 130 cm, W: 50 cm, H: 235 cm �� Connection sizes: Liquid inlet ¾” NPT �� Vapor return line ¾” NPT �� Recommended flow range: 6 – 60 lpm �� Maximum working pressure: 25 Bar �� Safety relief valve opening pressure: 14 Bar �� Recommended operational temperature: -40°C to +60°C �� Overall accuracy: ± 0.5% �� 40 Packaged weight: 2-nozzle (approximately) 510 kg. .
Gauges and Sensors Dimensions: Tank depth: Min 400mm, Max 4000mm (15.8” to 158”) * Mounting: 1/2” BSPT, 1/2” NPT, 1” BSP or optional 5 holes SAE flange Note: Max tank depth for fuels is 4000mm (158”) and for water is 3500mm (138”). Electrical: Supply voltage: 12 or 24Vdc nominal Supply current: 6mA@12Vdc Connections: 4 way Delphi Packard connector (Metri-Pak 150 series) Output signal: 0-5V (±0.5%) or 4-20mA Accuracy: ±2.5% of total fluid depth Construction: Housing: 30% glass filled Nylon 6 Sensor tube: Polyurethane flexible tube Seals: Viton Liquid Level Sensor The Model T/LL200 series is designed for use in tanks requiring continuous level measurement of their contents and provides a voltage or 4-20mA output suitable for connecting into a PLC or process related applications. The device has no moving parts and utilises hydrostatic technology incorporating a pressure transducer to measure the height of liquid. The flexible tube allows the sensor to be fitted easily and to tanks where a swing arm device is not practical. Maximum ratings: Supply voltage: 8 - 34Vdc Pressure (Hydrostatic): 5 psi Fluid Types: Fluids compatible with Stainless Steel, PA6, polyurethane & Viton Environmental Ratings: Temperature - operating: -20ºC to +85ºC (-4ºF to +185ºF) Sealing: IP67 Storage: -55ºC to +105ºC (-67ºF to + 221ºF) Shock 50g 6.3mS EMC: Designed to meet EN ISO 13766 Vibration: 1.5mm 10-40Hz (600 - 2400RPM) Liquid Level Sensor The Model T/LL130 series is designed for use in water, coolant or fuel/oil tanks and provides a variable resistive, voltage or PWM (Pulse Width Modulated) output suitable for driving industry standard fuel gauges or connecting into plcs. The device has no moving parts and can be mounted at any angle as long as it covers the whole depth of the tank. An optional manual calibration feature is available. Dimensions: Probe length: Min 200mm, Max 2000mm (Min 7.9”, Max 78.75”) Electrical: Supply voltage:7-35Vdc Supply current: 15mA@12Vdc approx Operating frequency: 8.3kHz Output signal: Factory set resistance range or Warning output: On...1/8 tank as default factory set between 0-5V or 5-0V Connections: 4 way Delphi Packard connector Linearity: 1% (Metri-Pak 150 series) Accuracy: ±2.5% of total probe length The voltage output consists of a voltage follower with a 100Ω resistor to limit the current draw. The load placed on the output must be greater than 10KΩ. Construction: Housing: 30% glass filled Nylon 6 Internal sensor: PTFE covered stainless steel Sensor tube: Fluid Types: Stainless steel 316 Seals: Fluorosilicone rubber Fluids compatible with 316 St/St, Nylon 6, PTFE & Nitrile rubber. N. B. Not suitable for fuels which contain Toluene Environmental Ratings: Temperature : 41 - operating: -40ºC to +85ºC (-40ºF to +185ºF) - storage: -55ºC to +100ºC (-67º to +212ºF) ` Sealing: IP67 Shock: 50g 6.3mS Vibration: BS EN 60068-2-64:1993 (15.3grms) Max tank pressure: 2.0 bar [29 psi] - + 100R C1 Vout
Page 1 and 2: 1 Oil ESEL Equipment EQUIPMENT
Page 3 and 4: 3 Contents Nozzles, Hoses, Reels &
Page 5 and 6: Nozzles, Hoses, Reels & Couplings 5
Page 7 and 8: Nozzles, Hoses, Reels & Couplings O
Page 9 and 10: 9 Hand Pumps Rotary Hand Pump - DA1
Page 11 and 12: Lubrication & Workshop Equipment Ai
Page 13 and 14: Lubrication & Workshop Equipment Ma
Page 15 and 16: Filtration & Fuel Conditionning Foo
Page 17 and 18: Filtration & Fuel Conditioning Fuel
Page 19 and 20: Filtration & Fuel Conditioning Fuel
Page 21 and 22: Flow Meters DM104 DM105 DM106 21 1
Page 23 and 24: Flow Meters Features TS10A TS15A TS
Page 25 and 26: Flow Meters Extremely flexible for
Page 27 and 28: Powered Pumps & Fuel Management DP1
Page 29 and 30: Powered Pumps & Fuel Management AC
Page 31 and 32: Powered Pumps & Fuel Management 31
Page 33 and 34: Powered Pumps & Fuel Management AC
Page 35 and 36: Powered Pumps & Fuel Management The
Page 37 and 38: Powered Pumps & Fuel Management FC1
Page 39: Liquid Petroleum Gas (LPG) 39 Featu
Page 43 and 44: Gauges and Sensors Electrical : Ree
Page 45 and 46: Gauges and Sensors Gauges specifica
Page 47 and 48: 47 NOTE
Page 49 and 50: 49 By Telephone +234 1 7916760, 479

WHO WE ARE AND WHAT WE SELL - Denver Petroleum

Create successful ePaper yourself

Delete template?

Save as template?