WHO WE ARE AND WHAT WE SELL - Denver Petroleum
WHO WE ARE AND WHAT WE SELL - Denver Petroleum
WHO WE ARE AND WHAT WE SELL - Denver Petroleum
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Gauges and Sensors<br />
Electrical :<br />
Reeds : - quantity: up to 12 switched level<br />
- switching; N/O, N/C, changeover or latched<br />
- current: up to 3.0A<br />
- power : up to 100VA<br />
- voltage : up to 300VAC<br />
Fitting :<br />
Standard: 1/2” BSP, 1” BSP, 1.1/2”BSP.<br />
Optional: Many other thread sizes, push fit, flange<br />
mount<br />
Terminations :<br />
IP67 terminal box, DIN connector, flying leads<br />
Electrical rating;<br />
Supply voltage:5 VDC or 7 - 35 VDC<br />
Supply current: 1.5mA + source output<br />
Max. Load Current:1.0A (sink) or 20mA (source)<br />
Alarm delay time:0 - 25 secs rising or falling<br />
Connection: 4 way Delphi Packard Connector<br />
Start up delay: 1-5 secs<br />
Fluid types:<br />
Water based fluid compatible with Brass, PTFE, and NBR rubber.<br />
43<br />
Vertical Float Switches<br />
The T/LL70 series is a comprehensive range of vertical float level switches designed<br />
around the proven and reliable magnet and reed switch principle.<br />
Comprising many build variants, the T/LL70 is customised to each application by means<br />
of materials, connection, header style, reed rating etc.<br />
Construction :<br />
Header :Brass, PVC or 316 stainless steel<br />
Stem : Brass, PVC or 316 stainless steel<br />
Float : Bruna N, Polypropylene or 316<br />
stainless steel.<br />
Fluid Types :<br />
Fluids compatible with the construction material.<br />
Coolant Alarm Switch<br />
The model S85 is an active device which is designed to give an alarm signal if fluids falls below<br />
or rises above a preset level. It will only signal after a few seconds delay in sensing the<br />
level to eliminate false alarms due to turbulence.<br />
Containing a programmable microprocessor, the switch can offer one or two output pins which<br />
can sink to ground or supply a source of voltage, or both.<br />
Its tiny footprint with limited intrusion into the tank means a reduced risk of damage and a wide<br />
range of options and customisations makes it suitable for most applications.<br />
Construction:<br />
Body: Brass<br />
Probe: PTFE<br />
Terminals: SAE CA210Brass, Tin Plated<br />
Seals: NBR Rubber<br />
Connector: 30% Glass Filled Nylon<br />
Thread: Vibra-Seal 516<br />
Environmental Ratings:<br />
Sealing: IP67<br />
Max. Pressure: 5.0 Bar (72psi)<br />
Temp. Ranges:<br />
Fluid: -40°C to +130°C<br />
Storage: -40°C to +140°C<br />
Weight: 53g