(03)Hands free.qxd - broen-sei

STABILET ® & STABILINE ®
- hands free water fittings

STABILET ® & STABILINE ®
- hands free water fittings
knee operated
STABILET ®
STABILET ® and STABILINE ®
are valves with a unique magnetically
operated opening and closing system,
especially designed for use in the food
industry, health sector or any other location
where a high standard of hygiene is
required.
The STABILET ® is a
thermostatic mixer
with a reliable
built-in DANFOSS
thermostat. The element
has a built-in
anti-scalding device
which automatically
shuts off the hot water if
the cold water supply is interrupted.
The STABILINE ® is for cold, hot or premixed water.
STABILINE ® 03-1
Basin spout.
For knee
operated
valve.
High spout.
For knee
operated
valve.
Electronic box.
To be used
together with an
electronic spout
when changing
a knee operated
valve to
electronic operated.
Wall spout.
For knee
operated
valve.
Swivel spout.
For knee
operated
valve.
www.broen.com
BROEN©3.2007

STABILET ® & STABILINE ®
- hands free water fittings
electronic operated
The valve bodies for the knee operated fittings can
be supplied with electronic operation.
This latest development ensures maximum control of
hygiene as the new system is ”non-touch”.
Operation of the valve
is simplicity in itself.
Each spout has infrared
sensors built into
the flange. Placing the
hands under the spout
breaks the beam and
operates the valve. Taking
the hands away
switches off the valve
shortly after.
The electronic operating unit contains
a mains transformer and all
circuits are intrinsically safe.
The operating distance for the
infrared sensor is preset when
delivered, but the built-in potentiometer
allows further adjustment
on site. A built-in illuminated
diode is also supplied to assist
installation.
1
Basin spout.
For electronic
valve.
High spout.
For electronic
valve.
2
3
Wall spout.
For electronic
valve.
www.broen.com
Principle sketch
STABILET ® EL/
STABILINE ® EL
1 Outlet including infrared sensor.
Reacts when an object is in front
of the spout.
2 Electronic box including transformer
from mains to 12V DC.
3 STABILET ® EL or
STABILINE ® EL valve.
03-2
BROEN©3.2007

STABILET ® & STABILINE ®
si
45
16
87
bar
10
8
si
45
16
87
bar
10
8
58
4
58
4
Technical information:
STABILET ® fitting
(common for knee and
electronic operated issue):
Working pressure: 0.5-10 bar.
Max. temp. on hot inlet: 90°C.
Scalding safe (closes for the hot
water if the cold water supply
should fail).
Built-in thermostat, safety temp.
preset to 38°C.
Regulating area 10-90°C.
Including outlet pipe:
PEX, length 550 mm.
The valve housing is painted
in a light grey BROEN POLYCOAT
surface.
STABILINE ® fitting
(common for knee and
electronic operated issue):
Working pressure: 0.5-10 bar.
Can be used for cold, hot and
premixed water.
Including outlet pipe:
PEX, length 550 mm.
The valve housing is painted
in a light grey BROEN POLYCOAT
surface.
Knee operated STABILET ® &
STABILINE ® only:
Operating arm material POM.
STABILET EL ® /STABILINE EL ®
No. 26 200.009
STABILET EL incl. electronic box.
No. 26 250.009
STABILINE EL incl. electronic box.
STABILET ® STABILINE ® 15 mm,
29
15
7.3
4.4
2.9
0,03 0,05
1,8 3,0
0,1
6,0
0,2 0,3 0,5
12,0 18,0 30,0
2
1
0,5
0,3
0,2
Electronic box
Mains voltage: 220V, 50 Hz phase,
neutral and earth. Other voltage on
request.
Operating voltage: 12V DC.
Short circuit safety transformer.
Power consumption: Idling: 3 W.
Working: 3.5 W.
Built-in control of max. flow time of
45 sec.
29
15
7.3
4.4
2.9
1,0 l/sec 0,03 0,05
60,0 l/min 1,8 3,0
0,1
6,0
0,2 0,3 0,5
12,0 18,0 30,0
2
1
0,5
0,3
0,2
1,0
60,0
l/sec
l/min
Adjustable operating distance, min.
5 cm, max. 50 cm.
Waterproof plastic box and cable
entries, IP 65.
Cable length: From electronic box to
STABILET EL ® /STABILINE EL ® : 100 cm.
From electronic box to sensor:
(spout)100 cm.
Screws and plugs included.
No. 26 300.00
Electronic box.
To be used when
changing a knee
operated fitting
to electronic
operated.
55
82
No. 26 301.003
No. 26 301.009 *
Basin spout.
91
No. 26 302.003
No. 26 302.009 *
High spout.
180
No. 26 303.003
No. 26 303.009
Wall spout.
G 3/8" nipple *
80
39
120 250
203
93
60
60 mm,
G 3/8" nipple *
60
60 mm,
G 3/8" nipple *
60
160
STABILET ® /STABILINE ® knee operated
No. 26 100.009
STABILET.
No. 26 150.009
STABILINE.
No. 26 400.003
No. 26 400.009
Swivel spout.
No. 26 401.003
No. 26 401.009
Basin spout.
No. 26 402.003
No. 26 402.009
High spout.
180
No. 26 403.003
No. 26 403.009
Wall spout.
180
39
375
91
15 mm,
G 3/8" nipple *
375
200
90
105
60
60 mm,
G 3/8" nipple *
120
60
60 mm,
G 3/8" nipple *
250
60
60 mm,
G 3/8" nipple *
60
160
Mounting accessories STABILET ® STABILINE ®
No. 26 070.443
Straight BALLOFIX ® 1/2˝ F x 3/4˝ M.
Angle BALLOFIX® for Cu-pipes
No. 26 100.462
with 10 mm PIPEFIX ® .
No. 26 100.472
with12 mm PIPEFIX ® .
No. 26 100.362
without PIPEFIX ® .
No. 33 211.003
Straight BALLOFIX ® 1/2˝ F x 3/4˝ M.
Angle BALLOFIX ® for Cu-pipes.
No. 26 150.302
with 10 mm PIPEFIX ® .
No. 26 150.312
with 12 mm PIPEFIX ® .
No. 26 150.322
without PIPEFIX ® .
We recommend the use of BROEN
mounting accessories as these are
based on the well-known BALLOFIX ®
with the possibility of regulating or
isolation during servicing.
* A 1/2" sleeve adaptor is supplied
with the spout for alternative connection.
www.broen.com
03-3
BROEN©3.2007

STABITHERM ®
39 mm
G 3/4
G 3/4
G 1/2 A
26 140.009; STABITHERM ®
thermostatic mixer for water with
integral check valves and filters on hot
and cold water inlets.
26 140.059; Lockable protection
cap for STABITHERM ® to prevent
unauthorized regulation of temperature.
Materials with medium contact:
55 mm
113 mm
Metals:
Sealing:
Plastics:
Lubricant:
Brass, Stainless steel
and cobber
EPDM, Nitrile
POM
Silicone based
Weight: 1.6 kg
45°
26 140.103; Fitting for bench mounting
with a built-in BALLOFIX ® shut-off
valve. Designed to be used with the
STABITHERM ® thermostatic mixer for
water (No. 26 140.009).
Materials with medium contact:
Metals: Brass, Stainless steel
and nickel
Sealing: EPDM
Plastics: POM, PP
Lubricant: Silicone based
Weight: 1.4 kg
175 mm
101 mm
www.broen.com
03-4
BROEN©3.2007