General accessories and roof decorations for concrete ... - Nelskamp

General accessories and roof 

decorations for concrete roofing tiles 

and clay roof tiles

General range of accessories for concrete roofing tiles. 

Our range of accessories and roof decorations is being constantly updated. The latest version can be found at: www.nelskamp.de 

Walking grid 40 cm 

coated 

Length: ~ 40.0 cm Width: ~ 34.0 cm 


coated 



coated 


Flexible universal hose 

for all concrete roofing tiles 

with adapter and hose clip 

Length: ~ 50 cm 

Copper roll/Alu roll 2000 

Length: ~ 5 m Width: ~ 29 cm, 33 cm, 36 cm 

Ventilation cross-section: permanent acc. to DIN 4108, Part 3 

Natural copper, anthracite, red 

Ridge/crest lath holder 

Start ridge and ridge end disc 

Screw nail 100 mm 

Insulating fresh air element 

Ventilation cross-section: ~ 200 cm 2 

Eaves fresh air element 

~ 1.1 pcs/m 

Snow hook 

Eaves comb 

~ 1.1 pcs/m 

Eaves ventilation strips 

grey or brown, 2 m complete 

Snow rib 

galvanised, 3 m long, 20 cm high 

Connecting clip 

for snow rib 

Coating agent 

1 litre, 35 kg 

Ridge or crest clip no. 470/77 

for crest/ridge flap 

Ridge or crest clip no. 470/76 

for ridge element 

Drill 

ø 5 mm, 100 mm long 

Diamond cutting wheel 

ø 230 mm 

Installation aid with screw (512) for cut pieces 

in the crest area 

Installation aid with wire (513) for cut pieces 

in the crest area

General range of accessories for clay roof tiles. 



coated 



coated 


Walking grid 150 cm** 

coated 


SnapStep universal alu step*** 

coated, for mounting on different lath thicknesses, 

can be adjusted for roof pitches from 0° - 60°; 

red, brown, black 

SnapStep 40 cm universal walking grid with two brackets* 




SnapStep 80 cm universal walking grid with two brackets* 





for all clay roof tiles 




for all NIBRA ® clay roof tiles 



Copper roll/Alu roll 2000 

Length: ~ 5 m Width: ~ 29 cm, 33 cm, 36 cm 

Ventilation cross-section: permanent acc. to DIN 4108, Part 3 

Natural copper, anthracite, red 

Ridge/crest lath holder 

Start ridge and ridge end disc/crest end disc 

Start ridge and ridge end disc/crest end disc 

Screw nail 100 mm 

Insulating fresh air element 

Ventilation cross-section: ~ 200 cm 2 

* only available F 15, F 12 Ü, F 13 Classic, F 10 Ü, 

Hollow tile, H 14, H 10, D 15 Ü, D 13, DS 10, R 15, 

R 13 S, R 10 and G 10 

** Not ex stocks – delivery period on request 

*** only available F 15, F 12 Ü, F 13 Classic, F 10 Ü, 

Hollow tile, H 14, D 15 Ü, D 13, DS 10, R 15, 

R 13 S, R 10 and G 10 

Eaves fresh air element 

~ 1.1 pcs/m 

Eaves comb 

~ 1.1 pcs/m 

Eaves ventilation strips 

grey or brown, 2 m complete 

Snow rib 

galvanised, 3.0 m long, 20 cm high 

galvanised, 1.5 m long, 20 cm high (only available for 

F 13 Classic, F 10 Ü, F 7 18°, DS 5, MS 5 and G 10) 

Connecting clip 

for snow rib 

Cold slip 

750 ml, 10 l 

Cold glaze 

750 ml 

Ridge or crest clips 

Drill 

ø 5 mm, 100 mm long 

Diamond cutting wheel 

ø 230 mm 

Rubber collar 

Connecting collar ø 125 for roof substructure 

leadthrough with through pantiles 

Snow hook 

Installation aid with screw (512) for cut pieces 

in the crest area 

Installation aid with wire (513) for cut pieces 

in the crest area

Copper roll 2000 and Alu roll 2000. 

The starring rolls on ridges and crests. 

COPPER, natural colour 

ALU, red 

ALU, anthracite 

For roofing tiles and roof tiles. For all common types of laying. 

Whether wide, narrow or maximum overlap, Copper roll 2000 and Alu roll 2000 fit any roof. 

Strip width 290 mm (normal undercover) 

Strip width 330 mm (wide undercover) 

Copper roll 2000 and Alu roll 2000 are 100% solutions for sealing 

and ventilating ridges and crests. 100% metal and thus ideal for 

the high demands in this area of the roof. The rolls are made 

entirely of copper or aluminium in the widths 290 mm, 330 mm 

and 360 mm. The safe function and service life are optimised 

by the use of only one material. The ventilation cross-section 

fully complies with DIN 4108, Part 3., i.e. permanent ventilation 

is guaranteed. This is achieved by the collar-shaped vent holes 

that safely drain any moisture in the event of any seepage 

water. The pleated area, with an elongation capacity of 20%, 

is moulded to the curves of the roofing tiles or roof tiles with a 

slight thumb pressure. The adhesive strip of butyl rubber ensures 

the permanently plastic as well as non-ageing and weatherproof 

connection to the roofing materials. 

The middle part of the roll is of a sturdy material strength and 

can be nailed to the ridge lath. The punctiform embossment 

makes work easier. It marks the centre of the roll and facilitates 

equidistant nailing. All materials used are solvent-free and 

recyclable as well as being environment friendly. 

Copper roll 2000 

This is supplied in its natural colour. There is thus no need for 

colour matching on coloured roofs. After laying the material 

assumes the brown copper colour that is then covered by the 

typical patina after longer exposure to weathering. Copper roll 

2000 is fully resistant to weathering and UV and has a very 

long service long. In those areas of visible copper strips that 

are exposed to weathering, Copper roll 2000 counteracts the 

growth of moss and lichen on the roof. Copper roll 2000 perfectly 

matches other roof materials of copper. Our Alu roll 2000 

should be used in combination with zinc materials. 

Alu roll 2000 

The most common roof colours are covered with the colours 

anthracite and red. The high-quality, 2-layer stove-enamel finish 

is UV-stabilised, weatherproof and corresponds to the quality of 

roofing components. 

Strip width 290 mm (narrow undercover) 

Strip width 360 mm (max. undercover)

Three points for fast laying. 

The raised dots mark the median line and facilitate flush laying. 

It also allows an exact alignment of the ridge tiles along the ridge 

and crest lath. 

We have also thought about on-the-job safety. 

The bent edges of the roll improve occupational safety. 

1 2 

3 4 

5 6 

Width 290 mm 

Width 330 mm 

Width 360 mm 

Copper roll 2000 and Alu roll 2000 are available in the widths 

290 mm, 330 mm and 360 mm. The rolls are always 5 m long. 

Perfect ventilation with water deflector. 

Spacious ventilation areas guarantee permanent ventilation according 

to DIN 4108, Part 3. The collar-shaped design of the holes also safely 

deflects any moisture. 

Your work becomes easier 

and safer. 

1 

2 

3 

4 

5 

6 

Laying ridges with no mortar using Copper roll and Alu roll. 

The Copper and Alu roll are processed directly from the roll. 

Unroll a strip of approx. 50 cm and staple to the centre of 

the ridge lath. We recommend copperplate cramps or copper 

nails for Copper roll. 

Proceed in the same way up to the end of the ridge. 

Remove the covering from the adhesive strip on the underside. 

When moulding the roll to roofing tiles or roof tiles the 

pleat is first pressed against the rim and stretched before 

shaping the water channel part. 

Note: The base must be clean, dry and free from grease 

or dust before you start work with the adhesive strip. 

Cut off the roll at the end of the ridge with a pair of universal 

scissors. Done! 

You can now start laying the ridge or crest tiles. Each ridge 

tile must be fastened with a ridge clip and screw nail to the 

counter-lath.

The range of roof decorations for clay roof tiles. 


Clay ridge owl 

Overall height: ~ 48.0 cm 

Clay ridge cat 1 


Clay ridge cat 2 


Clay ridge cockerel 


Weight: ~ 5.0 kg 

Clay sleepwalker, glazed 

(with white nightdress) 


Last revised 02/2010

General accessories and roof decorations for concrete ... - Nelskamp

Create successful ePaper yourself

Delete template?

Save as template?