download (7MB) - MACO

TECHNOLOGY IN MOTION 

MACO 

RAIL-SYSTEMS 

SLIDING FITTINGS 

Catalogue

Symbols 

0Symbols 

Part Number 

Packing Unit 

SRH = Sash Rebate Height 

Spindle Size 

SRW = Sash Rebate Width 

Sash Lifter 

kg 

Handle Height 

Length 

Surface Finish 

Maximum Sash Weight 

BS = Backset 

Ø Lugs 

Spindle Length 

L&S = Lift&Slide System 

T&S-S = Tilt&Slide Standard System 

T&S-SE = Tilt&Slide Self-engaging System 

T&S-PC = Tilt&Slide Positiv-control System 

PC = Profile Cylinder 

RC = Round Cylinder 

EH = burglar-resistant 

Note: If not indicated otherwise, measurements are given in Millimeters and packing units in pieces per box. 

2

1 Lift&Slide Systems — L&S 

2 Tilt&Slide Systems — T&S-S (Standard System) 

3 

Tilt&Slide Systems — T&S-SE (Self-Engaging 

System) 

4 

Tilt&Slide Systems — T&S-PC (Positive Control 

System) 

5 Locking Monitoring 

6 Technical and General Information 

10 

RAIL-SYSTEMS 

3


___________________________________________________________________________________ 

1.1 Design Options and Parts Lists ________________________________________________6 

1.2 Technical Information for Lift&Slide Fittings ___________________________________ 12 

1.3 Top Rail for Lift&Slide Systems ______________________________________________ 16 

1.4 Bottom Track for Lift&Slide Systems__________________________________________ 19 

1.5 MACO FIBER THERM (Thresholds, Connection Plates, Gaskets) __________________ 23 

1.6 Gaskets for Lift&Slide Systems ______________________________________________ 30 

1.7 Roller Packs ______________________________________________________________ 32 

1.8 Drive Gears for Lift&Slide Systems ___________________________________________ 33 

1.9 Handles for Lift&Slide Systems ______________________________________________ 35 

1.10 Accessories for Lift&Slide Systems___________________________________________ 47 

5


1.1 Design Options and Parts Lists 

A 

1 

DIN left-handed 

Solution for 2-sashed units: 

1 sliding sash, 

1 fixed glazing 

= fixed light 

Parts List: 

1 L&S roller pack 

1 Handle 

1 Lift&Slide drive-gear 

1 L&S connecting rod 

1 L&S top guide track (to be selected in accordance 

with the total frame width) 

1 Bottom roller track (to be selected in accordance 


— Gasket profile for the two sides and the bottom 

part, or alternatively an aluminium profile with 

brush seal for the dummy mullion 

— Gasket profile for the top part 

1 Accessories pack for the top guide track 

1 Accessories pack for the bottom roller track 

1 Top corner connecting brackets bag 

Order when using the threshold: 

1 Surface-mounted track for the fixed sashes (half 

the threshold length) together with the 

corresponding cover caps 

A 

1 

DIN right-handed 




= fixed light 

Parts List: 


1 Handle 












1 Accessories pack for the bottom roller track 






6

D 


2 contra-sliding sashes 

Parts List: 

2 L&S roller packs 

2 Handles 

2 Lift&Slide drive-gears 

2 L&S connecting rods 

2 L&S guide tracks (to be selected in accordance 


2 Bottom roller tracks (to be selected in accordance 






2 Accessory packs for the top guide track 

2 Accessory packs for the bottom roller track 


Order when using the threshold instead of the 2 bottom 

roller tracks: 

1 Roller track (just as long as the threshold) for the 

interior sash and ‘Illrid‘ gasket 

C 

1 1 


2 central sliding sashes, 

2 exterior fixed glazings 

= fixed light 

Parts List: 


2 Handles 



1 L&S guide tracks (to be selected in accordance 








3 Locking bolts on mounting-plate 

2 Accessory packs for the top roller track 







7

G 

1 

1 

Solution for 3-sashed 

units: 

1 central sliding 

sash, 

2 external fixed 

glazings 

= fixed light 

Parts List: 


1 Handle 








1 Sealing plate pack 


1 Buffer stop 

Central area sealing: 

- Timber strip and Maco‘s gasket 

- Gasket track for 28 mm air gap 

- Gasket profiles 

F 


2 central sliding sashes, 

2 exterior sliding sashes 

Parts List: 


4 Handles 



2 L&S top guide tracks (to be selected in 

accordance with the total frame width) 









- 2 gasket profiles 

- 3 locking bolts with mounting-plate 

8

K 


2 sliding sashes, 

1 fixed glazing, 

= fixed light 

1 

Parts List: 


2 Handles 



1 L&S guide track (to be selected in accordance 








4 Locking bolts 








H 


units: 

1 central sliding 

sash, 

2 exterior sliding 

sashes 

Parts List: 


3 Handles 










1 Buffer stop 




2 - 2 gasket profiles 

9

E 

1 


units: 


1 exterior fixed glazing 

= fixed light 

Parts List: 


2 Handles 










1 Buffer stop 





L 

C 

1 


4 sliding sashes, 2 exterior fixed glazings 

= fixed light 

1 

Parts List: 


4 Handles 










2 Buffer stop 

3 Locking bolts with mounting-plate 





10

1.2 Technical Information for Lift&Slide Fittings 

1.2.1 Hardware Overview for Lift&Slide Fittings - ALUMINIUM 

0 

1c 

1b 

1c 

1c 

1a 

1 

1n 

1a 

1a 

1a 

1p 

1r 

1o 

1s 

1p 

1p 

1q 

1p 

1p 

1m 

1k 

The sash height must not exceed 2.5 times the sash width! 

0 

0 

12

1 

1a 

1b 

1c 

1k 

1m 

1n 

1o 

1p 

1q 

1r 

1s 

1.3.1 Lift& Slide-Fittings Top Guide Rail with Screen ➞ 16 

1.3.2 Lift& Slide-Fittings Accessories for Top Guide Rail with Screen ➞ 16 

1.3.3 Lift& Slide-Fittings Top Guide Rail Universal ➞ 17 

1.3.4 Lift& Slide-Fittings Accessories for Top Guide Rail Universal ➞ 17 

1.3.6 Lift& Slide-Fittings Accessories for Top Guide Rail 'C' ➞ 18 

1.4.1 Bottom Track Flat ➞ 19 

1.4.3 Bottom Rail 'C' / Top Guide Rail 'C' ➞ 19 

1.4.4 Clip-in Track for Bottom Rail ‘C‘ ➞ 20 

1.4.5 Accessories for Rail ´C´ ➞ 20 

1.4.6 Frame Cover with Thermal Break ➞ 20 

1.4.7 Gasket for Thermal Break ➞ 20 

1.4.8 Aluminium Base Profile for Frame Cover ➞ 21 

1.4.9 Clip-in Track for Frame Cover ➞ 21 

1.4.12 Threshold Accessories Base Pack ➞ 22 

1.5.11.2Corner Connector ➞ 26 

1.6.2 Aluminium Profile with Brush Seal ➞ 30 

1.7 Roller Packs ➞ 32 

1.7.4 Connection Rod ➞ 32 

1.8 Drive Gears for Lift&Slide Systems ➞ 33 

1.9 Handles for Lift&Slide Systems ➞ 35 

13

1.2.2 Hardware Overview for Lift&Slide Fittings - FIBER-THERM 

0 

1c 

1b 

1m 

1a 

1 

1o 

1a 

1a 

1a 

1q 

1n 

1n 

1r 

1o 

1t 

1t 

1o 

1p 

1o 

1u 

1u 

1u 

1o 

1k 

1s 

The sash height must not exceed 2.5 times the sash width! 

0 

0 

14

1 

1a 

1b 

1c 

1k 

1m 

1n 

1o 

1p 

1q 

1r 

1s 

1t 

1u 

1.3.1 Lift& Slide-Fittings Top Guide Rail with Screen ➞ 16 

1.3.2 Lift& Slide-Fittings Accessories for Top Guide Rail with Screen ➞ 16 

1.3.3 Lift& Slide-Fittings Top Guide Rail Universal ➞ 17 

1.3.4 Lift& Slide-Fittings Accessories for Top Guide Rail Universal ➞ 17 

1.3.5 Lift& Slide-Fittings Bottom Rail 'C' / Top Guide Rail 'C' ➞ 17 

1.3.6 Lift& Slide-Fittings Accessories for Top Guide Rail 'C' ➞ 18 

1.5.1 MACO FIBRE THERM Basic Profile 180 ➞ 23 

1.5.3 MACO FIBRE THERM Basic Profile Extension ➞ 23 

1.5.4 MACO FIBRE THERM Surface-mounted Track for Timber ➞ 23 

1.5.6 MACO FIBRE THERM Surface-mounted Track for Moveable Sashes ➞ 24 

1.5.7 MACO FIBRE THERM Intermediate Profiles ➞ 24 

1.5.8 MACO FIBRE THERM Roller Track ➞ 25 

1.5.11.1Accessories for Roller Track ➞ 26 

1.5.11.2Corner Connector ➞ 26 

1.5.11.5Accessories ➞ 27 

1.6.1 Gasket Track and Accessories for 28mm Sash Distance ➞ 30 


1.7.3 Additional Roller Pack 400 kg ➞ 32 

1.7.4 Connection Rod ➞ 32 

1.7.5 Rod Guide and Groove Support-Brace ➞ 32 

1.8 Drive Gears for Lift&Slide Systems ➞ 33 

1.9 Handles for Lift&Slide Systems ➞ 35 

15

Lift&Slide Systems — L&S 


1.3 Top Rail for Lift&Slide Systems 

N19813 

1.3.1 Lift& Slide-Fittings Top Guide Rail with Screen 

S=56 silver 2500 1 1 N19813 

3500 1 1 N19814 

5000 1 1 N19815 

6500 1 1 N19816 

bronze 2500 1 1 N19833 

3500 1 1 N19834 

5000 1 1 N19835 

6500 1 1 N19836 

brown 2500 1 1 N19853 

3500 1 1 N19854 

5000 1 1 N19855 

6500 1 1 N19856 

S=68 silver 2500 1 1 N19913 

3500 1 1 N19914 

5000 1 1 N19915 

6500 1 1 N19916 

bronze 2500 1 1 N19933 

3500 1 1 N19934 

5000 1 1 N19935 

6500 1 1 N19936 

brown 2500 1 1 N19953 

3500 1 1 N19954 

5000 1 1 N19955 

6500 1 1 N19956 

1 

Equip with ILLRID tape 

101307 I200014 

1.3.2 Lift& Slide-Fittings Accessories for Top Guide Rail with Screen 

Accessories for top guide track Diagram A 68/23mm With cover Black 10 1 101307 

Accessories for top guide track Diagram A 68/23mm With cover Silver 10 1 101749 

Accessories for top guide track Diagram A 68/28mm With cover Black 10 2 101309 

Accessories for top guide track Diagram A 68/28mm With cover Black AluProfil Alto Nova 10 101887 

Accessories for top guide track Diagram A 68/28mm With cover Black AluProfil Gutmann System Braga 10 101832 

Accessories for top guide track Diagram A 68/28mm With cover Silver 10 2 101751 

Accessories for top guide track Diagram A 68/28mm With cover Silver AluProfil Alto Nova 10 101886 

Accessories for top guide track Diagram A 68/28mm With cover Silver AluProfil Gutmann System Braga 10 101833 

Accessories for top guide track Diagram D 68/23mm With cover Black 10 3 101308 

Accessories for top guide track Diagram D 68/23mm With cover Silver 10 3 101750 

Accessories for top guide track Diagram D 68/28mm With cover Black 10 4 101310 

Accessories for top guide track Diagram D 68/28mm With cover Silver 10 4 101752 

HS accessories for top guide 56 1 5 I200015 

HS accessories for top guide 68 1 6 I200014 

1 

Contents: 1 x rear top guide 42128,1 x front drive-gear sided guide 42129, 1 x rubber buffer 42146, 1 x gasket bridge 454866, 1 x gasket piece 42496 

2 

Contents: 1 x rear top guide 42128, 1 x front drive-gear sided guide 42129, 1 x rubber buffer 42146, 1 x gasket bridge 454880, 1 x gasket piece 42496 

3 Contents: 1 x rear top guide 42128, 1 x front drive-gear sided guide 42129, 1 x rubber buffer 42146, 1 x gasket bridge 454879, 1 x gasket piece 42496 

4 

Contents: 1 x rear top guide 42128, 1 x front drive-gear sided guide 42129, 1 x rubber buffer 42146, 1 x gasket bridge 454881, 1 x gasket piece 42496 

5 

Contents: 1 x rear top guide 42128, 1 x front drive-gear sided guide 42129, 1 x rubber buffer 42146, 1 x gasket bridge N21018, 1 x gasket piece 42496 

6 Contents: 1 x rear top guide 42128, 1 x front drive-gear sided guide 42129, 1 x rubber buffer 42146, 1 x gasket bridge N21020, 1 x gasket piece 42496 

16


N20913 

1.3.3 Lift& Slide-Fittings Top Guide Rail Universal 

silver 2500 1 N20913 

3500 1 N20914 

5000 1 N20915 

6500 1 N20916 

bronze 2500 1 N20933 

3500 1 N20934 

5000 1 N20935 

6500 1 N20936 

brown 2500 1 N20953 

3500 1 N20954 

5000 1 N20955 

6500 1 N20956 

101311 I200012 

1.3.4 Lift& Slide-Fittings Accessories for Top Guide Rail Universal 

Accessories for top guide track Diagram A 68/23mm “Universal low“ system Black 10 1 101313 

Accessories for top guide track Diagram A 68/23mm “Universal low“ system Silver 10 1 101755 

Accessories for top guide track Diagram A 68/28mm “Universal low“ system Black 10 2 101311 

Accessories for top guide track Diagram A 68/28mm “Universal low“ system Silver 10 2 101753 

Accessories for top guide track Diagram D 68/23mm “Universal low“ system Black 10 3 101314 

Accessories for top guide track Diagram D 68/23mm “Universal low“ system Silver 10 3 101756 

Accessories for top guide track Diagram D 68/28mm “Universal low“ system Black 10 4 101312 

Accessories for top guide track Diagram D 68/28mm “Universal low“ system Silver 10 4 101754 

HS accessories for top guide universal flat S=56 1 5 I200013 

HS accessories for top guide universal flat S=68 1 6 I200012 

1 

Contents: 1 x rear top guide 42128, 1 x front drive-gear sided guide 42129, 1 x rubber buffer 42146, 1 x gasket bridge 454865, 1 x gasket piece N21051 

2 Contents: 1 x rear top guide 42128, 1 x front drive-gear sided guide 42129, 1 x rubber buffer 42146, 1 x gasket bridge 454868, 1 x gasket piece N21051 

3 


4 


5 Contents: 1 x rear top guide 42128, 1 x front drive-gear sided guide 42129, 1 x rubber buffer 42146, 1 x gasket bridge N21014, 1 x gasket piece N21051 

6 

Contents: 1 x rear top guide 42128, 1 x front drive-gear sided guide 42129, 1 x rubber buffer 42146, 1 x gasket bridge N21016, 1 x gasket piece N21051 

N20113 

1.3.5 Lift& Slide-Fittings Bottom Rail 'C' / Top Guide Rail 'C' 

1 


silver 2500 1 1 N20113 

3500 1 1 N20114 

5000 1 1 N20115 

6500 1 1 N20116 

bronze 2500 1 1 N20133 

3500 1 1 N20134 

5000 1 1 N20135 

6500 1 1 N20136 

brown 2500 1 1 N20153 

3500 1 1 N20154 

5000 1 1 N20155 

6500 1 1 N20156 

17


I200010 

1.3.6 Lift& Slide-Fittings Accessories for Top Guide Rail 'C' 

Accessories for top guide track Diagram A 68/28mm mod."C" silver 10 1 101757 

black 10 2 101319 

HS accessories for top guide "C" S=68+56 1 I200010 

1 Contents: 1 x top drive-gear sided guide 208437, 1 x 208438 top hinge-sided guide, 1 x gasket piece 358390, 1 x gasket bridge 454898 

2 

Contents: 1 x top rear guide block 28773, 1 x top front guide block 28774, 1 x gasket bridge 454898, 1 x gasket piece 41483 

18


1.4 Bottom Track for Lift&Slide Systems 

N20213 

1.4.1 Bottom Track Flat 

silver 2500 1 N20213 

3500 1 N20214 

5000 1 N20215 

6500 1 N20216 

bronze 2500 1 N20233 

3500 1 N20234 

5000 1 N20235 

6500 1 N20236 

brown 2500 1 N20253 

3500 1 N20254 

5000 1 N20255 

6500 1 N20256 

N20613 N21004 N21052 

1.4.2 Accessories for Bottom Track Flat 

HS surface-mounted track for fixed sashes 42x8 black 2500 1 N20613 

5000 1 N20615 

Gasket bridge HS Bottom: flat version 4x49x68mm, black black 1 N21004 

Gasket piece HS For bottom roller track – low black 100 N21052 

HS accessories for bottom roller track 1 1 I200017 

1 

Contents: 1 x gasket bridge N21004, 1 x rubber gasket piece N21052 

N20113 

1.4.3 Bottom Rail 'C' / Top Guide Rail 'C' 

1 


silver 2500 1 1 N20113 

3500 1 1 N20114 

5000 1 1 N20115 

6500 1 1 N20116 

bronze 2500 1 1 N20133 

3500 1 1 N20134 

5000 1 1 N20135 

6500 1 1 N20136 

brown 2500 1 1 N20153 

3500 1 1 N20154 

5000 1 1 N20155 

6500 1 1 N20156 

19


N20313 

1.4.4 Clip-in Track for Bottom Rail ‘C‘ 

silver 2500 1 N20313 

3500 1 N20314 

5000 1 N20315 

6500 1 N20316 

bronze 2500 1 N20333 

3500 1 N20334 

5000 1 N20335 

6500 1 N20336 

brown 2500 1 N20353 

3500 1 N20354 

5000 1 N20355 

6500 1 N20356 

42497 N20613 N21004 I200016 

1.4.5 Accessories for Rail ´C´ 

Sealing rubber For high roller track, black black 100 42497 

HS surface-mounted track for fixed sashes 42x8 black 2500 1 N20613 

5000 1 N20615 

Gasket bridge HS Bottom: flat version 4x49x68mm, black black 1 N21004 

HS accessories for bottom roller track 1 1 I200016 

1 

Contents: 1 x gasket bridge N21004, 1 x rubber gasket piece 41483 

N22113 

1.4.6 Frame Cover with Thermal Break 

silver 2500 1 N22113 

3500 1 N22114 

5000 1 N22115 

6500 1 N22116 

bronze 2500 1 N22133 

3500 1 N22134 

5000 1 N22135 

6500 1 N22136 

brown 2500 1 N22153 

3500 1 N22154 

5000 1 N22155 

6500 1 N22156 

D910025 

1.4.7 Gasket for Thermal Break 

Gasket S6695 black 2,5 1 9 D910025 

3,5 1 9 D910035 

5 1 9 D910050 

6,5 1 9 D910065 

1 

All dimensions in metres 

20


N22516 

1.4.8 Aluminium Base Profile for Frame Cover 

silver 6500 1 N22516 

N22313 

1.4.9 Clip-in Track for Frame Cover 

silver 2500 1 N22313 

3500 1 N22314 

5000 1 N22315 

6500 1 N22316 

bronze 2500 1 N22333 

3500 1 N22334 

5000 1 N22335 

6500 1 N22336 

brown 2500 1 N22353 

3500 1 N22354 

5000 1 N22355 

6500 1 N22356 

N21200 N22203 

1.4.10 Individual Components Frame Cover 

Adapter spacer Lateral (left + right) For HS surface-mounted track 

N21200 

HS surface-mounted track for fixed sashes 42x19 black 2500 1 1 N22203 

5000 1 1 N22205 

1 


N22413 

1.4.11 Roller Track for 2nd Sliding Sash 

silver 2500 1 N22413 

3500 1 N22414 

5000 1 N22415 

6500 1 N22416 

bronze 2500 1 N22433 

3500 1 N22434 

5000 1 N22435 

6500 1 N22436 

brown 2500 1 N22453 

3500 1 N22454 

5000 1 N22455 

6500 1 N22456 

21


I200020 

1.4.12 Threshold Accessories Base Pack 

HS accessories for threshold with high roller track S=56 23L 1 1 I200021 

HS accessories for threshold with high roller track S=68 23L 1 2 I200023 

HS accessories for threshold with low roller track S=56 23L 1 1 I200020 

HS accessories for threshold with low roller track S=68 23L 1 3 I200022 

1 Contents: 1 x rubber gasket piece N21054, 2 x rubber covers for frame cover N21210, 1 x central rubber cover for L&S frame cover N21221 

2 

Contents: 1 x rubber gasket piece N21053, 2 x rubber covers for frame cover N21210, 1 x central rubber cover for L&S frame cover N21220 

3 

Contents: 1 x rubber gasket piece N21054, 2 x rubber covers for frame cover N21210, 1 x central rubber cover for L&S frame cover N21220 

N21053 N21054 N21210 N21220 

1.4.13 Individual Components for Frame Cover 

Gasket piece HS For threshold with high track black 100 N21053 

For threshold with low track black 100 N21054 

Rubber cover for thermally-insulated frame cover 1 N21210 

Central rubber cover for HS frame cover T.T. 1 L=10mm 100 1 N21222 

Central rubber cover for HS frame cover T.T. L=23mm 1 N21221 

L=35mm 1 N21220 

1 

Only for special version 

22


1.5 MACO FIBER THERM (Thresholds, Connection Plates, Gaskets) 

454772 

1.5.1 MACO FIBRE THERM Basic Profile 180 

180mm wide silver 2500 1 454772 

3000 1 454773 

3500 1 454774 

4000 1 454775 

4500 1 454776 

5000 1 454777 

5500 1 454778 

6000 1 454779 

6800 1 454780 

454781 

1.5.2 MACO FIBRE THERM Basic Profile 140 

140mm wide silver 2500 1 454781 

3000 1 454782 

3500 1 454783 

4000 1 454784 

4500 1 454785 

5000 1 454786 

5500 1 454787 

6000 1 454788 

6800 1 454789 

454790 454791 

1.5.3 MACO FIBRE THERM Basic Profile Extension 

short 88mm wide silver 6800 1 454790 

long 128mm wide silver 6800 1 454791 

454792 

1.5.4 MACO FIBRE THERM Surface-mounted Track for Timber 

for timber 42mm wide silver 1500 1 454792 

2000 1 454826 

2500 1 454827 

3500 1 454793 

454794 

1.5.5 MACO FIBRE THERM Surface-mounted Track for PVC 

for PVC 22mm wide silver 1500 1 454794 

2500 1 454795 

23


454796 

1.5.6 MACO FIBRE THERM Surface-mounted Track for Moveable Sashes 

For active sash silver 2500 1 454796 

3500 1 454797 

5000 1 454798 

6800 1 454799 

1.5.7 MACO FIBRE THERM Intermediate Profiles 

454800 

1.5.7.1 MACO FIBRE THERM Intermediate Profiles 76mm wide 

76mm wide silver 1500 1 454800 

2000 1 454801 

2500 1 454802 

3500 1 455255 

6800 1 454803 

454804 


99mm wide silver 1500 1 454804 

2000 1 454805 

2500 1 454806 

3500 1 454943 

6800 1 454807 

454808 


155mm wide silver 6800 1 454808 

454809 


195mm wide silver 6800 1 454809 

24


1.5.8 MACO FIBRE THERM Roller Track 

454810 

1.5.8.1 MACO FIBRE THERM Low Roller Track 

flat 1 silver 2500 1 454810 

3500 1 454811 

5000 1 454812 

6800 1 454813 

1 

The part number 356613 is absolutely necessary in conjunction with this part. 

454814 

1.5.8.2 MACO FIBRE THERM High Roller Track 

high silver 2500 1 454814 

3500 1 454815 

5000 1 454816 

6800 1 454817 

356613 

1.5.9 MACO FIBER THERM Bullet Catch for Low Roller Track 

100 356613 

465259 465261 465262 465260 

1.5.10 MACO FIBER THERM Insert Profiles 

Insert profile for basic profile for large chamber L=1000mm silver 10 465259 

Insert profile between basic profile and extension 180 L=3000mm silver 30 465261 

140 L=3000mm silver 30 465262 

Insert profile for basic profile and extension for small chamber L=1000mm silver 10 465260 

25


1.5.11 MACO FIBRE THERM Gaskets & Accessories 

101317 101318 

1.5.11.1 Accessories for Roller Track 

Accessories for flat roller track Diagram A for Fibertherm 68/28mm Diagram A silver 1 1 101317 

black 1 2 101828 

Accessories for high roller track Diagram A for Fibertherm 64/28 silver 1 3 101785 

68/28mm Diagram A silver 1 4 101318 

black 1 5 101829 

1 

Contents: 2 x connection plates silver 164/56 - 454856, 1 x gasket piece for low roller track silver - 454857, 1 x sealing plate for intermediate profile 99mm silver - 454860, 

clip-on gasket for sealing plate 42mm timber silver - 454861, 1 x gasket piece for fixed sashes 454882 

2 Contents: 2 x 455149 connection plates for Fibertherm 164/56 black, 1 x 455150 gasket piece for low roller track black, 1 x 455152 sealing plate for intermediate profile 

99mm black, 1 x 455153 clip-on gasket for sealing plate 42mm timber black, 1 x 455154 gasket piece for fixed sashes black 

3 

Contents: 2 x 455331 connection plates silver 156/56, 1 x 454858 gasket piece for high roller track, 1 x 454860 sealing plate for intermediate profile 99 mm silver, 1 x 

454861 clip-on gasket for sealing plate 42mm timber silver, 1 x 454882 gasket piece for fixed sashes 

4 

Contents: 2 x connection plates silver 164/56 - 454856, 1 x gasket piece for high roller track silver - 454858, 1 x sealing plate for intermediate profile 99mm silver - 

454860, clip-on gasket for sealing plate 42mm timber silver - 454861, 1 x gasket piece for fixed sashes 454882 

5 Contents: 2 x 455149 connection plates 164/56 black, 1 x 455151 gasket piece for high roller track black, 1 x 455152 sealing plate for intermediate profile 99mm black, 

1 x 455153 clip-on gasket for sealing plate 42mm timber black, 1 x 455154 gasket piece for fixed sashes black 

101333 101340 101341 

1.5.11.2 Corner Connector 

Maco-FiberTherm corner connector components 10 1 101333 

Fibertherm corner connector top 10 101340 

bottom 1 101341 

1 

Contents: 4 x corner connecting pins 355598, 25 x panhead bolts 454944 

455092 

1.5.11.3 Sealing Tape "Illmod eco" 

1 


Anthracite 10/4 8 1 455092 

10/6 5,6 1 455093 

15/10 3,3 1 455094 

26


455127 

1.5.11.4 Cover Cap 

Cover caps for intermediate profile 99mm for Fibertherm LS flat, 68/23 silver 10 455247 

LS flat, 68/28 silver 10 455249 

Cover caps for intermediate profile 99mm Diagram E-L for Fibertherm LS high, 68/23 silver 10 455248 

LS high, 68/28 silver 10 455127 

454867 356640 454859 455299 455115 

1.5.11.5 Accessories 

Overlap sealing plate for active sash and frame 78/28mm black 10 465224 

Maco Fibre-Therm supplementary profile, height 30mm white 1 454867 

Sealing strip for basic profile 140& 180mm for Fibertherm 10 metres black 1 356640 

5 metres black 1 358715 

7 metres black 1 358716 

2.5 metres black 1 358713 

3.5 metres black 1 358714 

Black gasket for seal casing black 10 454859 

Central sealing plate for 68/28mm black 10 465257 

Central gasket for 2 movable sashes Diagram D-F-H-E-L For the Netherlands 56/11 silver 10 455299 

68/11 silver 10 455300 

for Fibertherm 68-28-68 silver 10 455115 

465258 465222 360061 465225 

1.5.11.6 Accessories for Enhanced Watertightness 

kg 

Overlap sealing plate for active sash and frame 68/28mm right and left black 10 465258 

for active sash and frame 78/28mm right and left black 10 465224 

for frame 78mm, Alto Nova, right and left black 10 465289 

for frame 98/28mm right and left black 10 465288 

Sash gasket L&S for drive gear side and bottom, 

with welded corner, 

1 


black 2,5 1 1 465222 

3,5 1 1 465223 

Sash positioner L&S for high roller track silver for 150kg 10 360061 

for 300kg 10 360060 

Central sealing plate for 68/28mm right and left black 10 465257 

for 78/28mm right and left black 10 465225 

for 78mm, Alto Nova, right and left black 10 465293 

for 98/28mm right and left black 10 465292 

27


455125 455126 

1.5.11.7 Extension-Connector for Basic Profile 

Widening connector for base 140mm silver 10 455125 

180mm silver 10 455126 

455274 101652 

1.5.11.8 Counter-Nuts 

Counter nut 0x0 for L&S handle silver 100 455274 

Screw set M5x80 for L&S handle silver 10 101652 

101654 101662 

1.5.11.9 Extension-Connector 

Extension-connector for basic profiles for Fibertherm 2 sash levels silver 1 101654 

Extension-connector for basic profiles for Fibertherm 3 sash levels silver 1 101662 

455116 454860 357693 357694 357697 

1.5.11.10Sealing Plate 

Gasket for the fixed sash silver 10 455116 

Sealing plate for intermediate profile 99mm for Fibertherm silver 10 454860 

black 10 455152 

MACO gasket plate Fibre-Therm For the Netherlands 56/11, 2-sashed silver 10 357693 

68/11, 2-sashed silver 10 357694 

68/11& 56/11 silver 10 357697 

454856 

1.5.11.11Connection Plate 

Connector plate For the Netherlands 123/67, NL silver 10 454899 

140/67, NL silver 10 454900 

for Fibertherm 158/56 silver 10 455331 

164/56 silver 10 454856 

for Fibertherm 164/56 black 10 455149 

For the Netherlands 190/67, NL, 3-sashed silver 10 454901 

216/56 silver 10 455393 

For the Netherlands 226/67, NL, 3-sashed silver 10 454902 

for Fibertherm 250/56 silver 10 455106 

28


454857 454858 454882 454883 454903 454904 

1.5.11.12Gasket Piece 

For flat roller track, silver silver 100 454857 

For high roller track, silver silver 10 454858 

For flat roller track, black black 10 455150 

For high roller track, black black 10 455151 

For fixed sashes, silver black 10 455154 

silver 10 454882 

For the Netherlands silver 10 454883 

Accessories for flat roller track For the Netherlands 10 454903 

Accessories for high roller track For the Netherlands 10 454904 

454861 

1.5.11.13Upper Gasket 

Upper gasket for gasket plate For the Netherlands 56/11, 3-sashed silver 10 357695 

Upper gasket for gasket plate Diagram E-L For the Netherlands 68/11, 3-sashed silver 10 357696 

Attachment gasket for sealing plate 42mm timber for Fibertherm silver 10 454861 

black 10 455153 

101650 101649 

1.5.11.14Cover Caps Pack for Basic Profile (180mm + 140mm) 

Cover Cap Set for Fibertherm 140mm silver 10 101650 

180mm silver 10 101649 

29


1.6 Gaskets for Lift&Slide Systems 

455123 454878 454877 356611 356612 

1.6.1 Gasket Track and Accessories for 28mm Sash Distance 

HS gasket track set for 28mm sash distance 1 silver 2500 1 101653 

HS gasket track set for 28mm sash distance silver 5000 1 101665 

HS gasket track for 28mm sash distance silver 2500 1 455123 

5000 1 455124 

brown 2500 1 455203 

Brush gasket for HS gasket track silver 2500 1 454878 

5000 1 454886 

black 2500 5 455336 

Bubble gasket for HS gasket track silver L=50 m 50 2 454877 

black L=50 m 50 2 455337 

silver 5 metres 1 360507 

2.5 metres 1 360506 

Cover cap For HS gasket track Silver 10 356611 

356612 

1 

Contents: 1 x L&S gasket track for sash distance 28mm silver 455123, 2 x trailing gaskets for L&S gasket track silver 454878, 2 x cover strip for L&S gasket track right 

silver 356611, 2 x cover caps for L&S gasket track left silver 356612, 2 x bubble gaskets for L&S gasket tracks silver 357847. 

2 All dimensions in metres 

N20535 

1.6.2 Aluminium Profile with Brush Seal 

silver 2500 1 1 N20513 

5000 1 1 N20515 

bronze 2500 1 1 N20533 

5000 1 1 N20535 

brown 2500 1 1 N20553 

5000 1 1 N20555 

1 


15 

7 

3-4 

15° 

I725865 I732235 

5 

3 

7 

3 

5 

3-4 

1.6.3 Gaskets for Lift&Slide Systems 

Gasket for L&S doors for top Rustic Siliconised 15 1 1 I725861 

black Siliconised 15 1 1 I725863 

white Siliconised 15 1 1 I725865 

Gasket for L&S doors for drive gear side and bottom, with welded corner, Rustic Siliconised 30 1 1 I732231 

black Siliconised 30 1 1 I732233 

white Siliconised 30 1 1 I732235 

1 


30


101680 

1.6.4 Buffer Stop Pack — 28mm Distance 

white 10 101681 

black 10 101682 

silver 10 101680 

353341 

1.6.5 Buffer Stop Pack — 23mm Distance 

white 10 42240 

black 10 42278 

silver 10 353341 

31


1.7 Roller Packs 

102207 

1.7.1 Roller Pack 150 kg 

kg 

Roller pack black 150 1 102207 

silver 150 1 102206 

102205 

1.7.2 Roller Pack 300 kg 

kg 

Roller pack black 300 1 102205 

silver 300 1 102204 

102202 

1.7.3 Additional Roller Pack 400 kg 

kg 

Additional roller pack silver 400 1 102202 

359639 

1.7.4 Connection Rod 

Connection rod L&S 16,4x4 785 - 1350 692 10 359639 

1275 - 1850 1196 10 359640 

1775 - 2350 1700 10 359641 

2275 - 2850 2204 10 359642 

2775 - 3385 2708 10 359643 

Connection rod punched L&S 16,4x4 for additional roller 0 - 0 96 10 359638 

359801 359803 

1.7.5 Rod Guide and Groove Support-Brace 

Groove support-brace for 150kg 10 359801 

Groove support-brace for 300kg 1 359802 

Rod guide for roller track flat and high 1 359803 

32


1.8 Drive Gears for Lift&Slide Systems 

210457 

1.8.1 Drive Gears BS 27.5, PC 

Size 1 1 silver 730 - 760 400 700 10 5 210457 

bronze 730 - 760 400 700 10 5 210567 

brown 730 - 760 400 700 10 5 210568 

Size 2 1 silver 1175 - 1710 400 1650 10 5 210458 

bronze 1175 - 1710 400 1650 10 5 210569 

brown 1175 - 1710 400 1650 10 5 210570 

silver 1775 - 2060 1000 2000 10 5 210459 

bronze 1775 - 2060 1000 2000 10 5 210571 

brown 1775 - 2060 1000 2000 10 5 210572 

Size 4 1 silver 1925 - 2560 1000 2500 10 5 210460 

bronze 1925 - 2560 1000 2500 10 5 210573 

brown 1925 - 2560 1000 2500 10 5 210574 

Size 5 1 silver 2335 - 2860 1000 2800 10 5 210461 

bronze 2335 - 2860 1000 2800 10 5 210575 

brown 2335 - 2860 1000 2800 10 5 210576 

1 

The handle height dimensions refer to the low roller track. These increase by 10mm when used in conjunction with the bottom high roller track. These drive-gears may 

only be used in conjunction with L&S handles. 

210467 

1.8.2 Drive Gears BS 27.5, RC 

Size 1 1 silver 730 - 760 400 700 10 5 210467 

Size 2 1 silver 1175 - 1710 400 1650 10 5 210468 

1775 - 2060 1000 2000 10 5 210469 

Size 4 1 silver 1925 - 2560 1000 2500 10 5 210470 

Size 5 1 silver 2335 - 2860 1000 2800 10 5 210471 

1 

The handle height dimensions refer to the low roller track. These increase by 10mm when used in conjunction with the bottom high roller track. These drive-gears may 


210462 

1.8.3 Drive Gears BS 37.5, PC 

Size 1 1 silver 730 - 760 400 700 10 5 210462 

bronze 730 - 760 400 700 10 5 210577 

brown 730 - 760 400 700 10 5 210578 

Size 2 1 silver 1175 - 1710 400 1650 10 5 210463 

bronze 1175 - 1710 400 1650 10 5 210579 

brown 1175 - 1710 400 1650 10 5 210580 

silver 1775 - 2060 1000 2000 10 5 210464 

bronze 1775 - 2060 1000 2000 10 5 210581 

brown 1775 - 2060 1000 2000 10 5 210582 

Size 4 1 silver 1925 - 2560 1000 2500 10 5 210465 

bronze 1925 - 2560 1000 2500 10 5 210583 

brown 1925 - 2560 1000 2500 10 5 210584 

Size 5 1 silver 2335 - 2860 1000 2800 10 5 210466 

bronze 2335 - 2860 1000 2800 10 5 210585 

brown 2335 - 2860 1000 2800 10 5 210586 

1 

The handle height dimensions refer to the low roller track. In conjunction with the bottom roller track ‘C‘ with clip-in track; increased by 10mm. These drive-gears may 


33


210472 

1.8.4 Drive Gears BS 37.5, RC 

Size 1 1 silver 730 - 760 400 700 10 5 210472 

Size 2 1 silver 1175 - 1710 400 1650 10 5 210473 

1775 - 2060 1000 2000 10 5 210474 

Size 4 1 silver 1925 - 2560 1000 2500 10 5 210475 

Size 5 1 silver 2335 - 2860 1000 2800 10 5 210476 

1 

The handle height dimensions refer to the low roller track. In conjunction with the bottom roller track ‘C‘ with clip-in track; increased by 10mm. These drive-gears may 


38754 

1.8.5 Extension for Drive Gear 

non-punched silver 1000 10 38754 

non-punched bronze 1000 10 39186 

non-punched brown 1000 10 38755 

34


1.9 Handles for Lift&Slide Systems 

1.9.1 L&S-Handle 08 — Handle Sets 

102085 

1.9.1.1 With Cover Plate and Short Finger Pull 

Bronze 72 56 10 Anodised 1 102078 

68 10 Anodised 1 102079 

Champagne 72 56 10 Anodised 1 102080 

68 10 Anodised 1 102081 

Black brown 72 56 10 Anodised 1 102082 

68 10 Anodised 1 102083 

silver 72 56 10 Anodised 1 102084 

68 10 Anodised 1 102085 

Titanium 72 56 10 Anodised 1 102086 

68 10 Anodised 1 102087 

Traffic-white RAL 9016 72 56 10 powder coated 1 102088 

68 10 powder coated 1 102089 

102097 

1.9.1.2 With Cover Plate PC and Short Finger Pull 


68 10 Anodised 1 102091 


68 10 Anodised 1 102093 


68 10 Anodised 1 102095 


68 10 Anodised 1 102097 


68 10 Anodised 1 102099 



35


102108 

1.9.1.3 With Cover Plate RC and Short Finger Pull 


68 10 Anodised 1 102103 


68 10 Anodised 1 102105 


68 10 Anodised 1 102107 


68 10 Anodised 1 102109 


68 10 Anodised 1 102111 



102117 

1.9.1.4 With Internal and External Cover Plate PC 







36


102121 








210193 

1.9.1.6 With Cover Plate 

Bronze 72 10 Anodised 1 210185 

Champagne 72 10 Anodised 1 210188 

Cream RAL 9001 72 10 powder coated 1 210190 

Black brown 72 10 Anodised 1 210191 

silver 72 10 Anodised 1 210193 

Titanium 72 10 Anodised 1 210194 

Traffic-white RAL 9016 72 10 powder coated 1 210196 

37


210179 

1.9.1.7 With Cover Plate PC 








210205 

1.9.1.8 With Cover Plate RC 








359935 

1.9.1.9 Cover Plates for PC 

Bronze Anodised 1 359930 

Champagne Anodised 1 359931 

Cream RAL 9001 powder coated 1 359937 

Black brown Anodised 1 359932 

silver Anodised 1 359934 

Titanium Anodised 1 359935 

Traffic-white RAL 9016 powder coated 1 359936 

38


359941 

1.9.1.10 Cover Plates for RC 








359948 

1.9.1.11 Cover Plates 








39


1.9.2 L&S Handle Sets 

13341 

1.9.2.1 With Cover Plate and Finger Pull 


68 10 Anodised 1 10141 


68 10 Anodised 1 13345 


68 10 Anodised 1 13342 


68 10 Anodised 1 13341 


68 10 Anodised 1 10210 

White RAL 9016 71 56 10 powder coated 1 13338 


101841 

1.9.2.2 With Cover Plate and Short Finger Pull 


68 10 Anodised 1 101835 


68 10 Anodised 1 101838 


68 10 Anodised 1 101864 


68 10 Anodised 1 101841 


68 10 Anodised 1 101843 



40


10549 

1.9.2.3 With Cover Plate PC and Finger Pull 


68 10 Anodised 1 10592 


68 10 Anodised 1 11763 


68 10 Anodised 1 10594 


68 10 Anodised 1 10549 


68 10 Anodised 1 11764 



101851 

1.9.2.4 With Cover Plate PC and Short Finger Pull 


68 10 Anodised 1 101847 


68 10 Anodised 1 101849 


68 10 Anodised 1 101866 


68 10 Anodised 1 101851 


68 10 Anodised 1 101853 



41


101742 

1.9.2.5 With Cover Plate RC and Short Finger Pull 


68 10 Anodised 1 101737 


68 10 Anodised 1 101739 


68 10 Anodised 1 101741 


68 10 Anodised 1 101692 


68 10 Anodised 1 101744 



13343 


Bronze 1 71 68 10 Anodised 1 10142 

Champagne 1 71 68 10 Anodised 1 13346 

Black brown 1 71 68 10 Anodised 1 13344 

silver 1 71 68 10 Anodised 1 13343 

Titanium 1 71 68 10 Anodised 1 10647 

White RAL 9016 1 71 68 10 powder coated 1 10353 

1 

Order screws 42163 for 56 mm sashes. 

42


101731 

1.9.2.7 With Internal and External Cover Plate RC 







43


28576 

1.9.2.8 With Cover Plate 






White RAL 9016 71 10 powder coated 1 28972 

28577 

1.9.2.9 With Cover Plate PC 







208320 

1.9.2.10 With Cover Plate RC 







44


36820 

1.9.3 Lift&Slide Finger Pull 



Gold-F3 Anodised 1 39869 




White RAL 9016 powder coated 1 36823 

358342 

1.9.4 Lift&Slide Short Finger Pull 

Brown RAL 8022 powder coated 1 358340 

Bronze Painted 1 358343 

Champagne Painted 1 358342 

silver Painted 1 358341 

Titanium Painted 1 358344 


36415 

1.9.5 Cover Plates for PC 







358180 

1.9.6 Cover Plates for RC 





45


36416 

1.9.7 Cover Plates 







30000 

1.9.8 Spindles for L&S Handles 

Spindle for HS drive gear with finger pull 10x78mm 56 78 10 10 30000 

Spindle for HS drive gear with finger pull 10x84mm 68 84 10 10 30014 

Spindle for HS drive gear (pair) 10x138mm 68 138 10 10 30016 

37884 

1.9.9 Allen-Key Nut and Pin 

Allen-key pin Silver 50 357004 

Allen-key nut M6 SW12 10 37884 

42162 

1.9.10 Screws 

Countersunk screw Crosshead M6x60 DIN 965 silver 10 42162 




46


1.10 Accessories for Lift&Slide Systems 

42146 28773 42128 28774 42129 

1.10.1 Individual Components for L&S Guide Rails 

Rubber buffer HS black 50 42146 

Top guide - hinge-side, for guide track “C“ With buffer black 20 28773 

silver 50 208438 

Top guide - hinge-side, for guide track With cover and universally low, black 10 42128 

silver 10 358385 

Top guide - espagnolette side, for guide track “C“ black 20 28774 

silver 20 208437 

Top guide - espagnolette side, for guide track With cover and universally low, black 10 42129 

silver 10 358387 

210492 210491 

1.10.2 Individual Components for L&S Rollers 

kg 

behind HS 150 10 210492 

300 10 210478 

in front HS 150 10 210491 

300 10 210477 

47


41730 358389 41483 42496 N21053 N21054 454859 42146 

44324 44652 11325 94487 94117 11824 

1.10.3 Individual L&S Accessories — General 

Seal casing black 10 41730 

silver 10 358380 

Gasket piece HS For low universal guide on the top silver 1 358389 

Gasket piece for top guide mod."C" black 100 41483 

silver 100 358390 

Gasket piece HS For guide with top cover black 100 42496 

Gasket piece for top guide With cover silver 100 355837 

Gasket piece HS For low universal guide on the top black 100 1 358656 

Gasket piece HS For bottom roller track – low black 100 N21052 

Gasket piece HS For threshold with high track black 100 N21053 

Gasket piece HS For threshold with low track black 100 N21054 

Black gasket for seal casing black 10 454859 

Rubber buffer HS black 50 42146 

silver 50 358379 

Vertical HS centre lock silver 10 44324 

Vertical HS centre lock adjustable silver 100 44652 

HS locking bolts Complete for diagram C and L silver 20 11325 

HS locking bolts M12 for HS doors silver 10 94487 

HS locking bolts with special thread silver 10 94117 

Accessories bag for night ventilation HS 15/25 20 11824 

48


N21018 N21014 N21016 454866 

454868 

1.10.4 Gasket-Bridges 

Gasket bridge HS for top guide 27x57mm L=58 mm 1 N21018 

Gasket bridge HS for top guide 27x67mm L=70 mm 1 N21020 

Gasket bridge HS for top guide “Universal low“ system L=56 mm 1 N21014 

L=67 mm 1 N21016 

For guide tracks with 68/11mm, 56/23mm cover Diagram D 81 10 455404 

For guide tracks with 68/23mm cover Diagram A 72 10 454866 

Diagram D 93 10 454879 

For guide tracks with 68/28mm cover Diagram A 77 10 454880 

For guide with top cover 60x72mm 72 10 42130 

For low universal guide on the top 72 10 454865 

all diagrams 124 10 465249 

110 10 465250 

For low universal guide track 56/23 mm Diagram A 60 10 454864 

Diagram D 81 10 454869 

For low universal guide track 68/23 mm Diagram D 93 10 454870 

For low universal guide track 68/28 mm Diagram A 77 10 454868 

Diagram D 98 10 454871 

49


37760 94486 203924 206231 

203918 455270 455268 

455269 

1.10.5 L&S Marking Jigs 

Mark for L&S locking bolts 50 37760 

Screw-in adaptor for L&S locking bolts 1 94486 

HS drilling and routing jig for espagnolette drill-hole and recessed grip 1 203924 

HS drilling and routing jig for L&S espagnolette drill holes 1 204032 

Routing template for L&S recessed grip 1 204033 

Drilling jig for Maco Fiber-Therm for flat roller track 10 206231 

Drilling jig for Maco Fiber-Therm for connector plate 164/56 1 203918 

Intermediate profile jig for Maco Fiber-Therm 68/28 Diagram E-L 10 455270 

Intermediate profile jig for Maco Fiber-Therm 68/28 Diagram A-C-G-K 10 455268 

Intermediate profile jig for Maco Fiber-Therm 68/28 Diagram D-F-H 10 455269 

Drilling jig for Maco Fiber-Therm for connection plate 123/67& 140/67 1 207362 

Intermediate profile jig for Maco Fiber-Therm 64/28 Diagram A-C-G-K 10 455449 

50


___________________________________________________________________________________ 

2.1 Technical Information for T&S-S Fittings ______________________________________ 52 

2.2 Roller Packs ______________________________________________________________ 56 

2.3 Profile Packs T&S-S/SE _____________________________________________________ 57 

2.4 Corner Elements Pack T&S-S MULTI-TREND ___________________________________ 58 

2.5 Corner Elements Pack T&S-S MULTI-MATIC____________________________________ 58 

2.6 T&S-S Drive Gears MULTI-TREND ____________________________________________ 59 

2.7 T&S-S Drive Gears MULTI-MATIC_____________________________________________ 60 

2.8 Height Connectors, Width Connectors, Drive Gear Extensions MULTI-TREND _______ 61 

2.9 Height Connectors, Width Connectors MULTI-MATIC ____________________________ 62 

2.10 Strikers __________________________________________________________________ 63 

2.11 Handles and Spindles ______________________________________________________ 65 

2.12 T&S Handle and Rosette Sets________________________________________________ 67 

2.13 Profiles in Stock Lengths ___________________________________________________ 68 

2.14 Accessory Packs __________________________________________________________ 70 

2.15 Jigs _____________________________________________________________________ 71 

51

Tilt&Slide Systems — T&S-S (Standard 

System) 


Tilt&Slide Systems — T&S-S (Standard System) 

2.1 Technical Information for T&S-S Fittings 

2.1.1 Hardware Overview T&S-S 

0 

2 

2 

2 

2 

The ‘T&S-S’ Tilt&Slide fittings are suitable for the implementation of Tilt&Slide windows 

and doors for all conventional window profiles made of timber, PVC or timber/alu. 

When using these fittings, ensure that the sash does not exceed a total weight of 160 kg. 

The SRW width must be between 620-1650 mm, and the SRH height between 1000-2350 mm. 

The sash height should not exceed 2.5 times the sash width. 

0 

0 

52


System) 

2 


2.3.1 Profile Packs ➞ 57 

2.4 Corner Elements Pack T&S-S MULTI-TREND ➞ 58 

2.5 Corner Elements Pack T&S-S MULTI-MATIC ➞ 58 

2.6 T&S-S Drive Gears MULTI-TREND ➞ 59 

2.7 T&S-S Drive Gears MULTI-MATIC ➞ 60 

2.8.1 T&S-S/SE Height Connectors MULTI-TREND ➞ 61 

2.8.2 T&S-S/SE Width Connectors MULTI-TREND ➞ 61 

2.9.1 T&S-S/SE Height Connectors MULTI-MATIC ➞ 62 

2.9.2 T&S-S/SE Width Connectors MULTI-MATIC ➞ 62 

2.11 Handles and Spindles ➞ 65 

53


System) 

2.1.2 Design Options and Parts Lists 

A 

DIN left-handed 

Two-sashed unit: 



diagram A 

Parts List: 

1 Left-handed roller pack 

1 Profile set for sash and frame 

1 Corner element set or T&S-S corner element set 

1 T&T drive-gear, FHH 

1 Height connector 

2 Width connector 

1 Tilt striker 

Strikers (for 4 mm air gap: 1 pull-in wedge striker) 

1 Sash lifter 

2 SEC strikers 

1 Handle 

C 

Diagram ‘C‘: 

Four-sashed unit: 



Parts List: 

1 Right-handed roller packs 


2 Profile sets for sash and frame 

2 Corner element sets or T&S-S corner element 

sets 

2 T&T drive-gear, FHH 

2 Height connectors 

4 Width connectors 

Strikers (for 4 mm air gap: 2 pull-in wedge strikers) 

1 Sash lifter 

5 SEC strikers (with 4 mm air gap: 1 double-sided 

locking SEC striker) 

2 Handles 

54


System) 

C 

Diagram ‘C‘ asymmetrical 

Four-sashed unit: 



Parts List: 

1 Right-handed roller pack 



1 Corner element set or T&S-S corner element set 

1 Corner centre lock 

1 180° end-piece 

1 SEC 180° end-piece 

2 Drive-gear Trend, FHH 


4 Width connector 

1 Tilt striker 

Strikers (for 4 mm air gap: 1 pull-in wedge striker) 

2 Sash lifters 

5 SEC strikers (with 4 mm air gap: 1 double-sided 

locking SEC striker) 

2 Handles 

55


System) 

455798 


kg 

Roller pack left 1 160 1 455798 

Roller pack right 1 160 1 455799 

1 

Contents: 1 x drive-gear sided roller,1 x hinge-sided roller, 2 x reinforcement brackets 

56


System) 

2.3 Profile Packs T&S-S/SE 

455800 

2.3.1 Profile Packs 

Profile set: frame and sash SKB-S/SE 1 silver Size 1 620 - 900 1930 1 455800 

Size 2 901 - 1050 2230 1 455801 

Size 3 1051 - 1250 2630 1 455802 

Size 4 1251 - 1450 3030 1 455803 

Size 5 1451 - 1650 3430 1 455804 

white Size 1 620 - 900 1930 1 465003 

Size 2 901 - 1050 2230 1 465004 

Size 3 1051 - 1250 2630 1 465005 

Size 4 1251 - 1450 3030 1 465006 

Size 5 1451 - 1650 3430 1 465008 

brown Size 1 620 - 900 1930 1 465009 

Size 2 901 - 1050 2230 1 465010 

Size 3 1051 - 1250 2630 1 465011 

Size 4 1251 - 1450 3030 1 465012 

Size 5 1451 - 1650 3430 1 465013 

dark bronze Size 1 620 - 900 1930 1 465014 

Size 2 901 - 1050 2230 1 465015 

Size 3 1051 - 1250 2630 1 465016 

Size 4 1251 - 1450 3030 1 465017 

Size 5 1451 - 1650 3430 1 465018 

Cream-white Size 1 620 - 900 1930 1 465019 

Size 2 901 - 1050 2230 1 465020 

Size 3 1051 - 1250 2630 1 465021 

Size 4 1251 - 1450 3030 1 465022 

Size 5 1451 - 1650 3430 1 465023 

1 

Contents: 1 x guide track, 1 x guide cover, 2 x guide cover caps, 1 x top buffer stop, 1 x Tilt-Only stay-arm, 1 x scissor stay cover strip, 1 x left scissor-stay cover cap, 1 

x right scissor-stay cover cap, 1 x roller cover strip, 1 x left roller cover cap, 1 x right roller cover cap, 1 x connecting rod, 1 x roller track, 1 x control module, 1 x bottom 

buffer stop, 1 x cover support bracket for roller cover strip, (additional connecting-rod support-block on size 5) 

57


System) 

11989 11990 

2.4 Corner Elements Pack T&S-S MULTI-TREND 

Corner element set silver 1 1 11989 

EH silver 1 2 11990 

1 

Packaging contents: 2 corner elements, 2 corner centre locks each with 1 i.S. cam 

2 

Packaging contents: 2 corner elements each with 1 i.S. cam, 2 corner centre locks each with 1 i.S. cam 

102155 

2.5 Corner Elements Pack T&S-S MULTI-MATIC 

Corner element set MULTI-MATIC silver 1 1 102155 

1 

Contents: 2 x MM corner elements with 1 i.S., 2 x vertical corner elements with 1 i.S. with serrated carrier 

58


System) 

2.6 T&S-S Drive Gears MULTI-TREND 

52405 

2.6.1 T&T Drive Gears, FHH, BS 15 

silver Size 2 15 1 500 1001 - 1250 1 20 52405 

Size 4 15 1 600 1251 - 1500 1 10 52406 

Size 4B 15 1 500 1251 - 1500 1 10 52817 

Size 5 15 1 700 1501 - 1750 1 10 52407 

Size 5B 15 1 500 1501 - 1750 1 10 52818 

Size 6 1 15 2 1050 1851 - 2100 1 10 52408 

Size 6A 15 2 1050 1651 - 1850 1 10 55158 

Size 7 15 2 1050 2101 - 2350 1 10 52410 

1 

This espagnolette can be used from a S.R.H. of 1750mm (low doors) in connection with the corner element B. 

58443 

2.6.2 FHH Drive Gears, BS 25-40 for PC 

1 

Can also be supplied in less than one packaging unit. 

silver Size 6 25 1050 1851 - 2100 1 2 10 1 58443 

40 1050 1851 - 2100 1 2 10 1 52830 

Size 7 25 1050 2101 - 2350 1 2 10 1 52825 

40 1050 2101 - 2350 1 2 10 1 52831 

52970 

2.6.3 Turn-Only Drive Gears FHH without cams, BS 15 

silver Size 2 15 500 1001 - 1250 20 52970 

Size 4 15 600 1251 - 1500 10 52971 

Size 5 15 700 1501 - 1750 10 52972 

Size 6 15 1050 1851 - 2100 10 52973 

Size 7 15 1050 2101 - 2350 10 52974 

55995 

2.6.4 T&T Drive Gears, FHH, BS 15, i.S. 

silver Size 2 15 500 1001 - 1250 1 1 20 55995 

Size 4 15 600 1251 - 1500 1 1 10 55996 

Size 5 15 700 1501 - 1750 1 1 10 55997 

Size 6 15 1050 1851 - 2100 1 2 10 55998 

Size 7 15 1050 2101 - 2350 1 2 10 55999 

206560 

2.6.5 Drive Gears diagram C 

silver Size 6 30 1050 1851 - 2100 10 206560 

59


System) 

2.7 T&S-S Drive Gears MULTI-MATIC 

201734 


silver 1090 15 1 400 841 - 1090 1 20 201734 

1340 15 1 500 1091 - 1340 1 10 201735 

1590 15 2 600 1341 - 1590 1 10 201739 

1700 15 2 700 1591 - 1700 1 10 207301 

1950 15 3 1050 1701 - 1950 1 10 201740 

2200 15 3 1050 1951 - 2200 1 10 201741 

2450 15 4 1050 2201 - 2450 1 10 201742 

205602 

2.7.2 T&T Drive Gears, lockable, for PC 

silver 1950 25 3 1050 1701 - 1950 1 10 205602 

40 3 1050 1701 - 1950 1 10 206984 

2200 25 3 1050 1951 - 2200 1 10 205571 

40 3 1050 1951 - 2200 1 10 205631 

2450 25 4 1050 2201 - 2450 1 10 205623 

40 4 1050 2201 - 2450 1 10 205632 

205547 

2.7.3 Turn-Only Drive Gears FHH without cams, BS 15 

silver 1090 15 400 841 - 1090 20 205547 

1340 15 500 1091 - 1340 10 205548 

1590 15 600 1341 - 1590 10 205549 

1700 15 700 1591 - 1700 10 207304 

1950 15 1050 1701 - 1950 10 205545 

2200 15 1050 1951 - 2200 10 205550 

2450 15 1050 2201 - 2450 10 205551 

209968 


silver 1950 30 1050 1701 - 1950 10 209968 

60


System) 

2.8 Height Connectors, Width Connectors, Drive Gear Extensions MULTI-TREND 

57418 

2.8.1 T&S-S/SE Height Connectors MULTI-TREND 

Fixed handle height with 2 i.S. silver Size 2 1000 - 1250 2 10 57418 

Size 4 1251 - 1500 2 10 57419 

Size 5 1501 - 1750 2 10 57420 


Size 6A 1661 - 1850 3 10 57422 

Size 7 2101 - 2350 3 10 57423 

210529 

2.8.2 T&S-S/SE Width Connectors MULTI-TREND 

with 1 i.S. silver Size 1 620 - 900 1 20 210529 

Size 2 901 - 1150 1 20 210530 

1151 - 1400 1 20 210531 


10587 10585 

2.8.3 T&S-S/SE Drive Gear Extension MULTI-TREND 

Extension piece croppable to 400/250mm silver 1 600 20 1 10587 

Extension piece not croppable silver 0 250 20 1 10585 

1 Can also be supplied in less than one packaging unit. 

61


System) 

2.9 Height Connectors, Width Connectors MULTI-MATIC 

210335 

2.9.1 T&S-S/SE Height Connectors MULTI-MATIC 

with 1 i.S. silver 1090 841 - 1090 1 10 210335 

1340 1091 - 1340 1 10 210336 

with 2 i.S. silver 1590 1341 - 1590 2 10 210337 

1700 1591 - 1700 2 10 210338 

with 3 i.S. silver 1950 1701 - 1950 3 10 210339 

2200 1951 - 2200 3 10 210340 

with 4 i.S. silver 2450 2201 - 2450 4 10 210341 

210380 

2.9.2 T&S-S/SE Width Connectors MULTI-MATIC 

with 1 i.S. silver 900 620 - 900 1 20 210380 

1150 901 - 1150 1 20 210381 

1400 1151 - 1400 1 20 210382 

with 2 i.S. silver 1650 1401 - 1650 2 20 210383 

62


System) 

2.10 Strikers 

38593 96200 95117 96566 30274 

25438 30545 

2.10.1 Strikers for 4mm Air Gap 

Pull-in wedge for 4mm air gap for T&S silver 50 38593 

Horizontal i.S. tilt striker for 4mm air gap left angled screw-fixing 1 silver 100 96201 

Horizontal i.S. tilt striker for 4mm air gap right angled screw-fixing 1 silver 100 96200 

Lifting component for 4mm air gap 1 silver 100 95117 

i.S. striker for 4mm air gap left angled screw-fixing silver 100 96566 

i.S. striker for 4mm air gap right angled screw-fixing silver 100 96565 

Spacer with roll for 2-sashed windows for 4mm air gap Non-handed 1 silver 100 30274 

Spacer with roll for 2-sashed windows for 4mm air gap left 2 silver 50 25439 

Spacer with roll for 2-sashed windows for 4mm air gap right 2 silver 50 25438 

Striker for 4mm air gap silver 200 30545 

1 Routing length 90 mm. 

2 

Only for 2-sashed windows with burglary protection. For right-handed roller pack; use the double-sided striker on the left and vice versa. 

95114 96563 33932 34921 

2.10.2 Strikers for 12mm Air Gap, 6/8/4 Euro-Groove 

Lifting component for 6/8/4 Euro-groove silver 100 95114 

i.S. striker for 6/8/4 Euro-groove angled screw-fixing silver 100 96563 

Spacer with roll for 2-sashed windows for 6/8/4 Euro-groove Non-handed silver 100 33932 

Striker for 6/8/4 Euro-groove silver 200 34921 

95164 96564 33971 34902 


Lifting component for 7/8/4 Euro-groove silver 100 95164 


Spacer with roll for 2-sashed windows for 7/8/4 Euro-groove left silver 100 33971 


95113 96860 33981 

2.10.4 Strikers, 12mm Air Gap, 18mm Euro-Rebate 

Lifting component 18mm Euro-rebate angled screw-fixing silver 100 95113 

i.S. striker 18mm Euro-rebate angled screw-fixing silver 100 96860 

Spacer with roll for 2-sashed windows 18mm Euro-rebate silver 100 33981 

63


System) 

95116 96561 33961 34981 


Lifting component 20mm Euro-rebate angled screw-fixing silver 100 95116 


Spacer with roll for 2-sashed windows 20mm Euro-rebate with run-up block silver 100 33961 

Striker 20mm Euro-rebate angled screw-fixing silver 200 34981 

64


System) 

2.11 Handles and Spindles 

55720 

2.11.1 Handles, Lugs 10/12 

Bronze SKB 58 0 28 7 Anodised 10 203890 

32 28 7 Anodised 10 203888 

35 28 7 Anodised 10 203889 


32 28 7 Anodised 10 21470 

35 28 7 Anodised 10 203305 


32 28 7 Anodised 10 21465 

35 28 7 Anodised 10 203304 


32 28 7 Anodised 10 21269 

35 28 7 Anodised 10 203310 

Silver (white escutcheon cover) 58 0 28 7 Anodised 10 220632 

32 28 7 Anodised 10 22248 

35 28 7 Anodised 10 203308 


32 28 7 Anodised 10 55720 

35 28 7 Anodised 10 203307 


32 28 7 Anodised 10 21466 

35 28 7 Anodised 10 203306 


32 28 7 powder coated 10 21471 

35 28 7 powder coated 10 203309 

65


System) 

55781 

2.11.2 Handles with Key Locking, 

Lugs 10/12 


32 28 7 Anodised 10 203891 

35 28 7 Anodised 10 203892 


32 28 7 Anodised 10 21476 

35 28 7 Anodised 10 203317 


32 28 7 Anodised 10 21473 

35 28 7 Anodised 10 203316 


32 28 7 Anodised 10 21270 

35 28 7 Anodised 10 203322 


32 28 7 Anodised 10 22288 

35 28 7 Anodised 10 203320 


32 28 7 Anodised 10 55781 

35 28 7 Anodised 10 203319 


32 28 7 Anodised 10 21474 

35 28 7 Anodised 10 203318 


32 28 7 powder coated 10 21484 

35 28 7 powder coated 10 203321 

39013 

2.11.3 Spindles 

Spindle 52 26 7 20 39013 

56 30 7 20 39029 

61 35 7 20 30717 

64 38 7 20 94228 

69 43 7 20 39014 

76 50 7 20 30765 

66


System) 

2.12 T&S Handle and Rosette Sets 

203895 

2.12.1 Interior Handles, Lugs 12 

Bronze SKB Profile cylinder 54 28 7 Anodised 10 203901 

Bronze Profile cylinder 54 28 7 Anodised 10 203900 

Champagne Profile cylinder 54 28 7 Anodised 10 203897 

Black brown Profile cylinder 54 28 7 Anodised 10 203904 

Silver (white escutcheon cover) Profile cylinder 54 28 7 Anodised 10 203895 

silver Profile cylinder 54 28 7 Anodised 10 203896 

Titanium Profile cylinder 54 28 7 Anodised 10 203902 

White RAL 9016 Profile cylinder 54 28 7 powder coated 10 203903 

203894 

2.12.2 High Exterior Handles, Lugs 12 

Bronze SKB Profile cylinder 64-73 54 26 7 Anodised 10 203894 

Bronze Profile cylinder 64-73 54 26 7 Anodised 10 202625 

Champagne Profile cylinder 64-73 54 26 7 Anodised 10 202627 

Black brown Profile cylinder 64-73 54 26 7 Anodised 10 202626 

silver Profile cylinder 64-73 54 26 7 Anodised 10 202624 

Titanium Profile cylinder 64-73 54 26 7 Anodised 10 202628 

White RAL 9016 Profile cylinder 64-73 54 26 7 powder coated 10 202630 

67


System) 

2.13 Profiles in Stock Lengths 

455672 

2.13.1 Guide Track for T&S-S/SE/PC 

silver 6070 10 455672 

455673 

2.13.2 Cover for Top Guide-Track T&S-S/SE/PC 

silver 6080 50 455673 

white 6080 50 455674 

brown 6080 50 455675 

dark bronze 6080 50 455676 

Cream-white 6080 50 455677 

455664 

2.13.3 Bottom Roller Track for T&S-S/SE/PC 

silver 6070 10 455664 

brown 6070 10 455665 

dark bronze 6070 10 455666 

455667 

2.13.4 Cover Strip for T&S-S/SE/PC Rollers 

silver 5170 10 455667 

2036 10 465181 

white 5170 10 455668 

2036 10 465182 

brown 5170 10 455669 

2036 10 465183 

dark bronze 5170 10 455670 

2036 10 465184 

Cream-white 5170 10 455671 

2036 10 465185 

455683 

2.13.5 Connecting Rod for T&S-S/SE/PC 

Connection rod T&S-S/SE/PC 3600 1 455683 

68


System) 

455678 

2.13.6 Cover Strip for T&S-S/SE Scissor Stays 

silver 5170 10 455678 

white 5170 10 455679 

brown 5170 10 455680 

dark bronze 5170 10 455681 

Cream-white 5170 10 455682 

465024 

2.13.7 Tilt-Only Stay-Arm for T&S-S/SE 

620 - 900 610 10 465024 

901 - 1250 912 10 465025 

1251 - 1650 1212 10 465026 

69


System) 

2.14 Accessory Packs 

455648 

2.14.1 Accessories Pack for T&S-S/SE/PC 

silver 40 1 455648 

white 40 1 455649 

brown 40 1 455650 

dark bronze 40 1 455651 

Cream-white 40 1 455662 

1 

Contents: 1 x left roller cover cap, 1 x right roller cover cap, 1 x left scissor stay cover cap, 1 x right scissor stay cover cap, 2 x guide cover cap, 1 x control module, 1 x 

bottom buffer stop, 1 x top buffer stop 

455653 

2.14.2 T&S-S/SE Control Module, adjustable 

Control module T&S for diagram D 1 silver 10 455653 

white 10 455655 

brown 10 455657 

1 

Only for diagram D 

465277 

2.14.3 Cover Support Bracket for Roller Cover Strip T&S-S/SE/PC 

Cover support bracket for roller T&S-S/SE/PC 50 465277 

70


System) 

2.15 Jigs 

465173 465174 465175 

465178 

2.15.1 Jigs for T&S-S/SE 

Clamping jig for positioning the T&S guide track and roller track 1 465173 

Jig used to align the screw holes centrally on T&S rollers 1 465174 

Installation jig for T&S control module 1 465175 

Drilling jig for movable T&S control module Diagram D 1 1 465178 

1 


2.15.2 Striker Positioning Jigs for T&S-S/SE MULTI-TREND 

Jig for T&S-S/SE height-related components With retainer for 34943 1 14583 

Striker positioning jig for fixed handle height espagnolettes with 48mm retainer 1 10362 

Striker positioning jig for fixed handle height espagnolettes with retainer for 12mm Euro-rebate 1 10363 

Striker positioning jig set for T&S-S width related components for 48mm retainers 1 1 101191 

Striker positioning jig set for T&S-S width related components for 50mm retainers 1 1 101192 

1 

Contents: 1 bottom width connector jig, 1 top width connector jig 

2.15.3 Striker Positioning Jigs for T&S-S/SE MULTI-MATIC 

Striker positioning jig for espagnolettes, SRH 661-1340 1 1 204774 

Striker positioning jig for standard espagnolettes and EH version, SRH 661-1340 1 1 204775 

Striker positioning jig for espagnolettes for doors 1 1 204776 

Striker positioning jig for T&S-S/SE width related components with 50mm retainer 1 211010 

Striker positioning jig for T&S-S width connector, bottom with 50mm retainer 1 211267 

1 

Jigs suitable for drive-gears and height connectors 

71

72 


System)

3 Tilt&Slide Systems — T&S-SE (Self-Engaging System) 

___________________________________________________________________________________ 

3.1 Technical Information for T&S-SE Fittings _____________________________________ 74 

3.2 Roller Packs ______________________________________________________________ 77 

3.3 Profile Packs______________________________________________________________ 78 

3.4 Corner Elements Pack T&S-SE MULTI-TREND __________________________________ 79 

3.5 Corner Elements Pack T&S-SE MULTI-MATIC __________________________________ 79 

3.6 T&S-SE Drive Gears MULTI-TREND ___________________________________________ 80 

3.7 T&S-SE Drive Gears MULTI-MATIC ___________________________________________ 81 

3.8 Height Connectors, Width Connectors, Drive Gear Extensions MULTI-TREND _______ 82 

3.9 Height Connectors, Width Connectors MULTI-MATIC ____________________________ 83 

3.10 Strikers and Striker Plates __________________________________________________ 84 

3.11 Handles and Spindles ______________________________________________________ 85 

3.12 T&S Handle and Rosette Sets________________________________________________ 87 

3.13 Profiles in Stock Lengths ___________________________________________________ 88 

3.14 Accessory Packs __________________________________________________________ 90 

3.15 Jigs _____________________________________________________________________ 91 

73

Tilt&Slide Systems — T&S-SE (Self- 

Engaging System) 

3 Tilt&Slide Systems — T&S-SE (Self-Engaging System) 

Tilt&Slide Systems — T&S-SE (Self-Engaging System) 

3.1 Technical Information for T&S-SE Fittings 

3.1.1 Hardware Overview T&S-SE 

0 

3 3 

3 

3 

The ‘T&S-S’ Tilt&Slide fittings are suitable for the implementation of Tilt&Slide windows 

and doors for all conventional window profiles made of timber, PVC or timber/alu. 

When using these fittings, ensure that the sash does not exceed a total weight of 160 kg. 


The sash height should not exceed 2.5 times the sash width. 

0 

0 

74



3 


3.3 Profile Packs ➞ 78 

3.4 Corner Elements Pack T&S-SE MULTI-TREND ➞ 79 

3.5 Corner Elements Pack T&S-SE MULTI-MATIC ➞ 79 

3.6 T&S-SE Drive Gears MULTI-TREND ➞ 80 

3.7 T&S-SE Drive Gears MULTI-MATIC ➞ 81 

3.8.1 T&S-S/SE Height Connectors MULTI-TREND ➞ 82 

3.8.2 T&S-S/SE Width Connectors MULTI-TREND ➞ 82 

3.9.1 T&S-S/SE Height Connectors MULTI-MATIC ➞ 83 

3.9.2 T&S-S/SE Width Connectors MULTI-MATIC ➞ 83 

3.10.6 Striker Plate Set for T&S-SE/PC ➞ 84 

3.11 Handles and Spindles ➞ 85 

75




A 

Diagram "A": 

Two-sashed unit: 1 sliding sash, 1 fixed glazing 

Two-sashed unit: 1 sliding sash, 1 Turn-Only sash with 

dummy mullion 

Parts List: 



Corner element set or T&S-SE corner element set, 

1 

left 

1 Turn-Only espagnolette FHH 



1 T&S-SE/PC strikerplate set 

Strikers (for 4 mm air gap: 1 pull-in wedge striker 

and 1 T&S-SE tilt striker, 4 mm air gap) 

1 Handle 

C 

Diagram "‘C": 

Four-sashed unit: 2 sliding sashes, 1 fixed glazing 

Parts List: 




1 


right 


1 

left 

2 Turn-Only espagnolette FHH 

2 Height connectors 


2 T&S-SE/PC striker plate sets 

Strikers (for 4 mm air gap: 2 pull-in wedge strikers 

and 1 T&S-SE tilt striker, 4 mm air gap) 

2 Handles 

76



455798 


kg 

Roller pack left 1 160 1 455798 

Roller pack right 1 160 1 455799 

1 

Contents: 1 x drive-gear sided roller,1 x hinge-sided roller, 2 x reinforcement brackets 

77



455800 

3.3 Profile Packs 

Profile set: frame and sash SKB-S/SE 1 silver Size 1 620 - 900 1930 1 455800 

Size 2 901 - 1050 2230 1 455801 

Size 3 1051 - 1250 2630 1 455802 

Size 4 1251 - 1450 3030 1 455803 

Size 5 1451 - 1650 3430 1 455804 

white Size 1 620 - 900 1930 1 465003 

Size 2 901 - 1050 2230 1 465004 

Size 3 1051 - 1250 2630 1 465005 

Size 4 1251 - 1450 3030 1 465006 

Size 5 1451 - 1650 3430 1 465008 

brown Size 1 620 - 900 1930 1 465009 

Size 2 901 - 1050 2230 1 465010 

Size 3 1051 - 1250 2630 1 465011 

Size 4 1251 - 1450 3030 1 465012 

Size 5 1451 - 1650 3430 1 465013 


Size 2 901 - 1050 2230 1 465015 

Size 3 1051 - 1250 2630 1 465016 

Size 4 1251 - 1450 3030 1 465017 

Size 5 1451 - 1650 3430 1 465018 


Size 2 901 - 1050 2230 1 465020 

Size 3 1051 - 1250 2630 1 465021 

Size 4 1251 - 1450 3030 1 465022 

Size 5 1451 - 1650 3430 1 465023 

1 

Contents: 1 x guide track, 1 x guide cover, 2 x guide cover caps, 1 x top buffer stop, 1 x Tilt-Only stay-arm, 1 x scissor stay cover strip, 1 x left scissor-stay cover cap, 1 

x right scissor-stay cover cap, 1 x roller cover strip, 1 x left roller cover cap, 1 x right roller cover cap, 1 x connecting rod, 1 x roller track, 1 x control module, 1 x bottom 

buffer stop, 1 x cover support bracket for roller cover strip, (additional connecting-rod support-block on size 5) 

78



102167 102168 

3.4 Corner Elements Pack T&S-SE MULTI-TREND 

Corner element set left 1 silver 1 102167 

Corner element set left 2 EH silver 1 102168 

Corner element set right 1 silver 1 102169 

Corner element set right 2 EH silver 1 102170 

1 Packaging contents: 2 corner elements, 2 corner centre locks with snapper catch with 1 i.S. cam 

2 

Packaging contents: 2 corner elements each with 1 i.S. cam, 2 corner centre locks with snapper catch with 1 i.S. cam 

102171 

3.5 Corner Elements Pack T&S-SE MULTI-MATIC 

Corner element set MULTI-MATIC left silver 1 1 102171 

Corner element set MULTI-MATIC right silver 1 1 102172 

1 

Contents: 1 x MM corner element with 1 i.S., vertical corner element with 1 i.S. with serrated carrier, 1 x hinge-sided corner element with snapper catch, 1 x drive-gear 

sided corner drive with snapper catch 

79



3.6 T&S-SE Drive Gears MULTI-TREND 

55137 


1 

Not a stocked part - Minimum order quantity and lead-time upon request. 

silver Size 2 15 1 500 1001 - 1250 0 20 55137 

Size 4 15 1 600 1251 - 1500 0 10 55138 

Size 4A 15 0 500 1251 - 1500 1 10 1 55159 

Size 5 15 1 700 1501 - 1750 0 10 55139 

Size 6 15 2 1050 1851 - 2100 0 10 55218 

Size 6A 15 2 1050 1651 - 1850 0 10 55882 

Size 7 15 2 1050 2101 - 2350 0 10 55219 

55952 

3.6.2 T&T Drive Gears, FHH, BS 15, i.S. 

silver Size 2 15 400 801 - 1000 1 20 55952 

500 1001 - 1250 1 10 55953 

Size 4 15 600 1251 - 1500 1 10 55954 

Size 5 15 700 1501 - 1750 1 10 55955 

Size 6 15 1050 1851 - 2100 2 10 58222 

206560 


silver Size 6 30 1050 1851 - 2100 10 206560 

80



3.7 T&S-SE Drive Gears MULTI-MATIC 

201834 

3.7.1 Turn-Only Drive Gears FHH, BS 15 

silver 1090 15 1 400 841 - 1090 20 201834 

1340 15 1 500 1091 - 1340 10 201835 

1590 15 2 600 1341 - 1590 10 201836 

1700 15 2 700 1591 - 1700 10 207302 

1950 15 3 1050 1701 - 1950 10 201837 

2200 15 3 1050 1951 - 2200 10 201838 

2450 15 4 1050 2201 - 2450 10 201839 

209968 


silver 1950 30 1050 1701 - 1950 10 209968 

81



3.8 Height Connectors, Width Connectors, Drive Gear Extensions MULTI-TREND 

57418 

3.8.1 T&S-S/SE Height Connectors MULTI-TREND 


Size 4 1251 - 1500 2 10 57419 

Size 5 1501 - 1750 2 10 57420 


Size 6A 1661 - 1850 3 10 57422 

Size 7 2101 - 2350 3 10 57423 

210529 

3.8.2 T&S-S/SE Width Connectors MULTI-TREND 


Size 2 901 - 1150 1 20 210530 

1151 - 1400 1 20 210531 


1 

For T&S-SE from 650mm SRW 

10587 10585 

3.8.3 T&S-S/SE Drive Gear Extension MULTI-TREND 

Extension piece croppable to 400/250mm silver 1 600 20 10587 

Extension piece not croppable silver 0 250 20 10585 

82



3.9 Height Connectors, Width Connectors MULTI-MATIC 

210335 

3.9.1 T&S-S/SE Height Connectors MULTI-MATIC 

with 1 i.S. silver 1090 841 - 1090 1 10 210335 

1340 1091 - 1340 1 10 210336 

with 2 i.S. silver 1590 1341 - 1590 2 10 210337 

1700 1591 - 1700 2 10 210338 

with 3 i.S. silver 1950 1701 - 1950 3 10 210339 

2200 1951 - 2200 3 10 210340 

with 4 i.S. silver 2450 2201 - 2450 4 10 210341 

210380 

3.9.2 T&S-S/SE Width Connectors MULTI-MATIC 

with 1 i.S. silver 900 620 - 900 1 1 20 210380 

1150 901 - 1150 1 20 210381 

1400 1151 - 1400 1 20 210382 

with 2 i.S. silver 1650 1401 - 1650 2 20 210383 

1 

For T&S-SE from 650mm SRW 

83



3.10 Strikers and Striker Plates 

38593 96566 96565 30545 

3.10.1 Strikers for 4mm Air Gap 

Pull-in wedge for 4mm air gap for T&S silver 50 38593 

i.S. striker for 4mm air gap left angled screw-fixing silver 100 96566 

i.S. striker for 4mm air gap right angled screw-fixing silver 100 96565 

Striker for 4mm air gap silver 200 30545 

96563 34921 




96564 34902 




96860 34943 34980 



Striker 18mm Euro-rebate double screw fixing silver 200 34943 


96561 34981 




455717 455711 455714 455716 

3.10.6 Striker Plate Set for T&S-SE/PC 

Striker plate set for T&S-SE/PC for 4mm air gap, 9mm offset silver 50 455717 

Striker plate set for T&S-SE/PC 18mm Euro-rebate silver 50 455711 

Striker plate set for T&S-SE/PC 20mm Euro-rebate silver 50 455714 

Striker plate set for T&S-SE/PC for 7/8/4 Euro-groove silver 50 455716 

84



3.11 Handles and Spindles 

55720 

3.11.1 Handles, Lugs 10/12 


32 28 7 Anodised 10 203888 

35 28 7 Anodised 10 203889 


32 28 7 Anodised 10 21470 

35 28 7 Anodised 10 203305 


32 28 7 Anodised 10 21465 

35 28 7 Anodised 10 203304 


32 28 7 Anodised 10 21269 

35 28 7 Anodised 10 203310 


32 28 7 Anodised 10 22248 

35 28 7 Anodised 10 203308 


32 28 7 Anodised 10 55720 

35 28 7 Anodised 10 203307 


32 28 7 Anodised 10 21466 

35 28 7 Anodised 10 203306 


32 28 7 powder coated 10 21471 

35 28 7 powder coated 10 203309 

85



55781 

3.11.2 Handles with Key Locking, 

Lugs 10/12 


32 28 7 Anodised 10 203891 

35 28 7 Anodised 10 203892 


32 28 7 Anodised 10 21476 

35 28 7 Anodised 10 203317 


32 28 7 Anodised 10 21473 

35 28 7 Anodised 10 203316 


32 28 7 Anodised 10 21270 

35 28 7 Anodised 10 203322 


32 28 7 Anodised 10 22288 

35 28 7 Anodised 10 203320 


32 28 7 Anodised 10 55781 

35 28 7 Anodised 10 203319 


32 28 7 Anodised 10 21474 

35 28 7 Anodised 10 203318 


32 28 7 powder coated 10 21484 

35 28 7 powder coated 10 203321 

39013 

3.11.3 Spindles 

Spindle 52 26 7 20 39013 

56 30 7 20 39029 

61 35 7 20 30717 

64 38 7 20 94228 

69 43 7 20 39014 

76 50 7 20 30765 

86



3.12 T&S Handle and Rosette Sets 

203900 

3.12.1 Interior Handles, Lugs 12 

Bronze SKB Profile cylinder 54 28 7 Anodised 10 203901 

Bronze Profile cylinder 54 28 7 Anodised 10 203900 

Champagne Profile cylinder 54 28 7 Anodised 10 203897 

Black brown Profile cylinder 54 28 7 Anodised 10 203904 

Silver (white escutcheon cover) Profile cylinder 54 28 7 Anodised 10 203895 

silver Profile cylinder 54 28 7 Anodised 10 203896 

Titanium Profile cylinder 54 28 7 Anodised 10 203902 

White RAL 9016 Profile cylinder 54 28 7 powder coated 10 203903 

203894 

3.12.2 High Exterior Handles, Lugs 12 

Bronze SKB Profile cylinder 64-73 54 26 7 Anodised 10 203894 

Bronze Profile cylinder 64-73 54 26 7 Anodised 10 202625 

Champagne Profile cylinder 64-73 54 26 7 Anodised 10 202627 

Black brown Profile cylinder 64-73 54 26 7 Anodised 10 202626 

silver Profile cylinder 64-73 54 26 7 Anodised 10 202624 

Titanium Profile cylinder 64-73 54 26 7 Anodised 10 202628 

White RAL 9016 Profile cylinder 64-73 54 26 7 powder coated 10 202630 

87




455672 


silver 6070 10 455672 

455673 


silver 6080 50 455673 

white 6080 50 455674 

brown 6080 50 455675 

dark bronze 6080 50 455676 

Cream-white 6080 50 455677 

455664 

3.13.3 Bottom Roller Track for T&S-S/SE/PC 

silver 6070 10 455664 

brown 6070 10 455665 

dark bronze 6070 10 455666 

455667 


silver 5170 10 455667 

2036 10 465181 

white 5170 10 455668 

2036 10 465182 

brown 5170 10 455669 

2036 10 465183 

dark bronze 5170 10 455670 

2036 10 465184 

Cream-white 5170 10 455671 

2036 10 465185 

455683 

3.13.5 Connecting Rod for T&S-S/SE/PC 


88



455678 

3.13.6 Cover Strip for T&S-S/SE Scissor Stays 

silver 5170 10 455678 

white 5170 10 455679 

brown 5170 10 455680 

dark bronze 5170 10 455681 

Cream-white 5170 10 455682 

465024 

3.13.7 Tilt-Only Stay-Arm for T&S-S/SE 

620 - 900 610 10 465024 

901 - 1250 912 10 465025 

1251 - 1650 1212 10 465026 

89




455648 

3.14.1 Accessories Pack for T&S-S/SE/PC 

silver 40 1 455648 

white 40 1 455649 

brown 40 1 455650 



1 



455653 

3.14.2 Adjustable Control Module T&S-S/SE 

Control module T&S for diagram D 1 silver 10 455653 

white 10 455655 

brown 10 455657 

1 


465277 



90



3.15 Jigs 

465175 465174 465178 

465173 

3.15.1 Jigs for T&S-S/SE 

Routing template for T&S-PC retaining device for 4mm air gap 1 465176 



Drilling jig for movable T&S control module Diagram D 1 1 465178 


1 Only for diagram D 

3.15.2 Striker Positioning Jigs for T&S-S/SE MULTI-TREND 

Jig for T&S-S/SE height-related components With retainer for 34943 1 14583 

Striker positioning jig for fixed handle height espagnolettes with 48mm retainer 1 10362 

Striker positioning jig for fixed handle height espagnolettes with retainer for 12mm Euro-rebate 1 10363 

Striker positioning jig set for T&S-SE width related components for 48mm retainers top and bottom 1 1 102303 

Striker positioning jig set for T&S-SE width related components for 50mm retainers top and bottom 1 1 102304 

1 

Contents: 1 bottom width connector jig, 1 top width connector jig 

3.15.3 Striker Positioning Jigs for T&S-S/SE MULTI-MATIC 

Striker positioning jig for espagnolettes, SRH 661-1340 1 1 204774 

Striker positioning jig for standard espagnolettes and EH version, SRH 661-1340 1 1 204775 

Striker positioning jig for espagnolettes for doors 1 1 204776 

Striker positioning jig for T&S-S/SE width related components, with 50mm retainer, top 1 211010 

Striker positioning jig for T&S-SE width connector, with 50mm retainer, bottom 1 211268 

1 Jigs suitable for drive-gears and height connectors 

91

92 


Engaging System)

4 Tilt&Slide Systems — T&S-PC (Positive Control System) 

___________________________________________________________________________________ 

4.1 Technical Information for T&S-PC Fittings _____________________________________ 94 

4.2 Basic Carton 160 kg________________________________________________________ 97 

4.3 Basic Carton 200 kg________________________________________________________ 97 

4.4 Basic Carton for Diagram C _________________________________________________ 98 

4.5 Profile Pack_______________________________________________________________ 99 

4.6 Drive Gears and Height Connectors _________________________________________ 100 

4.7 Width Connectors and Drive Gear Extensions _________________________________ 107 

4.8 Strikers, Frame Components and Mishandling-Devices _________________________ 108 

4.9 Handle Sets______________________________________________________________ 110 

4.10 Profiles in Stock Lengths __________________________________________________ 113 

4.11 Accessory Packs _________________________________________________________ 114 

4.12 Jigs ____________________________________________________________________ 115 

4.13 Profile Sheet — Accessories for T&S-SE/PC___________________________________ 116 

93

Tilt&Slide Systems — T&S-PC (Positive 

Control System) 

4 Tilt&Slide Systems — T&S-PC (Positive Control System) 

Tilt&Slide Systems — T&S-PC (Positive Control System) 

4.1 Technical Information for T&S-PC Fittings 

4.1.1 Hardware Overview T&S-PC 

0 

The ‘T&S-PC’ Tilt&Slide fittings are suitable for the implementation of Tilt&Slide windows 

and doors with positive control for all conventional window profiles made of timber, PVC or timber/alu. 

The individual sashes may not exceed a total weight of 200* kg. 


* Tandem rollers are used from a sash weight of 160 kg. 

0 

0 

94



4.2 Basic Carton 160 kg ➞ 97 

4.5 Profile Pack ➞ 99 

4.6 Drive Gears and Height Connectors ➞ 100 

4.7.1 T&S-PC Width Connector Set ➞ 107 

4.8.6 T&S-PC Mishandling-Device Pack for Timber ➞ 109 

4.9 Handle Sets ➞ 110 

95




A 

Diagram ‘A‘: 

Two-sashed unit: 1 sliding sash, 1 fixed glazing 

Parts List: 

1 Left-handed basic carton 


1 T&S-PC drive-gear set 

1 T&S-PC width connector set 

1 T&S-SE/PC strikerplate set 

Strikers 

1 T&S-PC handle set 

1 T&S-PC mishandling-device pack (optional) 

C 

Diagram ‘C‘: 

Four-sashed unit: 2 sliding sashes (each with a handle), 

2 fixed glazings 

Parts List: 

1 Basic carton pack for diagram C 


1 T&S-PC drive-gear set 

1 T&S-PC drive-gear set for diagram C 

2 T&S-PC width connector sets 

2 T&S-SE/PC strikerplate sets 

Strikers 

2 Handle packs 

2 T&S-PC mishandling-device pack (optional) 

96



455506 

4.2 Basic Carton 160 kg 

kg 

left 160 kg Offset = 13mm silver 160 1 1 455506 

Offset = 9mm silver 160 1 1 455507 

right 160 kg Offset = 13mm silver 160 1 1 455508 


1 

Contents: 1 x drive-gear sided roller, 1 x hinge-sided roller, 2 x reinforcement brackets, 1 x coupling bar, 2 x bottom corner elements with snapper catch, 2 x top corner 

elements with scissor stay 

455510 

4.3 Basic Carton 200 kg 

kg 

left 200 kg Offset = 13mm silver 200 1 1 455510 


right 200 kg Offset = 13mm silver 200 1 1 455511 


1 Contents: 1 x drive-gear sided tandem roller, 1 x hinge-sided tandem roller, 2 x reinforcement brackets, 1 x coupling bar, 2 x bottom corner elements with snapper catch, 

2 x top corner elements with scissor stay 

97



455514 

4.4 Basic Carton for Diagram C 

kg 

For diagram C Offset = 13mm silver 160 1 1 455514 


1 

Contents: 1 x left drive-gear sided roller, 1 x left hinge-sided roller, 1 x right drive-gear sided roller, 1 x right drive-gear sided roller, 4 x reinforcement brackets, 2 x coupling 

bars, 4 x corner elements with snapper catch, 4 x corner elements with scissor stay 

98



455613 

4.5 Profile Pack 

Profile set: frame and sash SKB-Z 1 silver Size 1 720 - 900 1930 1 455613 

Size 2 901 - 1050 2230 1 455614 

Size 3 1051 - 1250 2630 1 455615 

Size 4 1251 - 1450 3030 1 455616 

Size 5 1451 - 1650 3430 1 455617 

Size 6 1651 - 2000 4130 1 455619 

white Size 1 720 - 900 1930 1 455620 

Size 2 901 - 1050 2230 1 455621 

Size 3 1051 - 1250 2630 1 455622 

Size 4 1251 - 1450 3030 1 455623 

Size 5 1451 - 1650 3430 1 455624 

Size 6 1651 - 2000 4130 1 455626 

brown Size 1 720 - 900 1930 1 455627 

Size 2 901 - 1050 2230 1 455628 

Size 3 1051 - 1250 2630 1 455629 

Size 4 1251 - 1450 3030 1 455630 

Size 5 1451 - 1650 3430 1 455631 

Size 6 1651 - 2000 4130 1 455633 


Size 2 901 - 1050 2230 1 455635 

Size 3 1051 - 1250 2630 1 455636 

Size 4 1251 - 1450 3030 1 455637 

Size 5 1451 - 1650 3430 1 455638 

Size 6 1651 - 2000 4130 1 455640 


Size 2 901 - 1050 2230 1 455642 

Size 3 1051 - 1250 2630 1 455643 

Size 4 1251 - 1450 3030 1 455644 

Size 5 1451 - 1650 3430 1 455645 

Size 6 1651 - 2000 4130 1 455647 

1 Contents: 1 x guide track, 1 x guide cover, 2 x guide cover caps, 1 x top buffer stop, 2 x scissor-stay sliders, 1 x slider release, 2 x scissor stay arm cover caps, 1 x roller 

cover strip, 1 x left roller cover cap, 1 x right roller cover cap, 1 x connecting rod, 1 x roller track, 1 x control module, 1 x bottom buffer stop, 1 x cover support bracket for 

roller cover strip (2 pcs. from size 5 ), 1 x connecting-rod support-block (from size 5) 

99



4.6 Drive Gears and Height Connectors 

455523 

4.6.1 T&S-PC Drive Gear Set, BS 0 

1 silver Size 1 DM 0 450 900 - 1100 0 5 455523 

Size 2 DM 0 450 1101 - 1300 2 5 455524 

650 1301 - 1500 4 5 455525 

Size 4 DM 0 650 1501 - 1700 4 5 455526 

Size 5 DM 0 950 1701 - 1900 4 5 455527 

Size 6 DM 0 950 1901 - 2100 4 5 455528 

Size 7 DM 0 950 2101 - 2300 4 5 455529 

Size 8 DM 0 950 2301 - 2400 4 5 455530 

1 

Contents: 1 x drive-gear, 1 x height connector 

455531 

4.6.2 T&S-PC Drive Gear Set, BS 17.5 

1 

1 


silver Size 1 DM 17,5 450 900 - 1100 0 5 455531 

Size 2 DM 17,5 450 1101 - 1300 2 5 455532 

650 1301 - 1500 4 5 455533 

Size 4 DM 17,5 650 1501 - 1700 4 5 455534 

Size 5 DM 17,5 950 1701 - 1900 4 5 455535 

Size 6 DM 17,5 950 1901 - 2100 4 5 455536 

Size 7 DM 17,5 950 2101 - 2300 4 5 455537 

Size 8 DM 17,5 950 2301 - 2400 4 5 455538 

4.6.3 T&S-PC Drive Gears, BS 30 

455539 

4.6.3.1 T&S-PC Drive Gear Set 

1 silver Size 2 DM 30 450 1101 - 1300 2 5 455539 

650 1301 - 1500 4 5 455540 

Size 4 DM 30 650 1501 - 1700 4 5 455541 

Size 5 DM 30 950 1701 - 1900 4 5 455542 

Size 6 DM 30 950 1901 - 2100 4 5 455543 

Size 7 DM 30 950 2101 - 2300 4 5 455544 

Size 8 DM 30 950 2301 - 2400 4 5 455545 

1 Contents: 1 x drive-gear, 1 x height connector 

100



455546 

4.6.3.2 T&S-PC Drive Gear Set, PC, lockable 

1 

1 


silver Size 5 DM 30 950 1701 - 1900 4 5 455546 

Size 6 DM 30 950 1901 - 2100 4 5 455547 

Size 7 DM 30 950 2101 - 2300 4 5 455548 

Size 8 DM 30 950 2301 - 2400 4 5 455549 

455550 

4.6.3.3 T&S-PC Drive Gear Set for Diagram C 

1 silver Size 2 DM 30 450 1101 - 1300 5 455550 

650 1301 - 1500 5 455551 

Size 4 DM 30 650 1501 - 1700 5 455552 

Size 5 DM 30 950 1701 - 1900 5 455553 

Size 6 DM 30 950 1901 - 2100 5 455554 

Size 7 DM 30 950 2101 - 2300 5 455555 

Size 8 DM 30 950 2301 - 2400 5 455556 



455557 


1 

1 


silver Size 5 BS 35 950 1701 - 1900 4 5 455557 

Size 6 BS 35 950 1901 - 2100 4 5 455558 

Size 7 BS 35 950 2101 - 2300 4 5 455559 

Size 8 BS 35 950 2301 - 2400 4 5 455560 

101



455561 


1 

1 


silver Size 5 BS 35 950 1701 - 1900 4 5 455561 

Size 6 BS 35 950 1901 - 2100 4 5 455562 

Size 7 BS 35 950 2101 - 2300 4 5 455563 

Size 8 BS 35 950 2301 - 2400 4 5 455564 

455565 


1 silver Size 5 BS 35 950 1701 - 1900 5 455565 

Size 6 BS 35 950 1901 - 2100 5 455566 

Size 7 BS 35 950 2101 - 2300 5 455567 

Size 8 BS 35 950 2301 - 2400 5 455568 



455569 


1 

1 


silver Size 1 BS 40 450 900 - 1100 0 5 455569 

Size 2 BS 40 450 1101 - 1300 2 5 455570 

650 1301 - 1500 4 5 455571 

Size 4 BS 40 650 1501 - 1700 4 5 455572 

Size 5 BS 40 950 1701 - 1900 4 5 455573 

Size 6 BS 40 950 1901 - 2100 4 5 455574 

Size 7 BS 40 950 2101 - 2300 4 5 455575 

Size 8 BS 40 950 2301 - 2400 4 5 455576 

102



455577 


1 

1 


silver Size 5 BS 40 950 1701 - 1900 4 5 455577 

Size 6 BS 40 950 1901 - 2100 4 5 455578 

Size 7 BS 40 950 2101 - 2300 4 5 455579 

Size 8 BS 40 950 2301 - 2400 4 5 455580 

455581 


1 silver Size 2 BS 40 450 1101 - 1300 5 455581 

650 1301 - 1500 5 455582 

Size 4 BS 40 650 1501 - 1700 5 455583 

Size 5 BS 40 950 1701 - 1900 5 455584 

Size 6 BS 40 950 1901 - 2100 5 455585 

Size 7 BS 40 950 2101 - 2300 5 455586 

Size 8 BS 40 950 2301 - 2400 5 455587 



455588 


1 

1 


silver Size 5 BS 45 950 1701 - 1900 4 5 455588 

Size 6 BS 45 950 1901 - 2100 4 5 455589 

Size 7 BS 45 950 2101 - 2300 4 5 455590 

Size 8 BS 45 950 2301 - 2400 4 5 455591 

103



455592 


1 

1 


silver Size 5 BS 45 950 1701 - 1900 4 5 455592 

Size 6 BS 45 950 1901 - 2100 4 5 455593 

Size 7 BS 45 950 2101 - 2300 4 5 455594 

Size 8 BS 45 950 2301 - 2400 4 5 455595 

455596 


silver Size 5 BS 45 950 1701 - 1900 5 455596 

Size 6 BS 45 950 1901 - 2100 5 455597 

Size 7 BS 45 950 2101 - 2300 5 455598 

Size 8 BS 45 950 2301 - 2400 5 455599 


455600 


1 silver Size 5 BS 50 950 1701 - 1900 4 5 455600 

Size 6 BS 50 950 1901 - 2100 4 5 455601 

Size 7 BS 50 950 2101 - 2300 4 5 455602 

Size 8 BS 50 950 2301 - 2400 4 5 455603 


104



455604 


1 

1 


silver Size 5 BS 50 950 1701 - 1900 4 5 455604 

Size 6 BS 50 950 1901 - 2100 4 5 455605 

Size 7 BS 50 950 2101 - 2300 4 5 455606 

Size 8 BS 50 950 2301 - 2400 4 5 455607 

455608 


1 silver Size 5 BS 50 950 1701 - 1900 5 455608 

Size 6 BS 50 950 1901 - 2100 5 455609 

Size 7 BS 50 950 2101 - 2300 5 455610 

Size 8 BS 50 950 2301 - 2400 5 455611 


4.6.8 T&S-PC Drive Gears, RC 

455790 

4.6.8.1 T&S-PC Drive Gears, BS 30, RC, lockable 

1 

1 


silver Size 5 DM 30 950 1701 - 1900 4 5 455790 

Size 6 DM 30 950 1901 - 2100 4 5 455791 

Size 7 DM 30 950 2101 - 2300 4 5 455792 

Size 8 DM 30 950 2301 - 2400 4 5 455793 

105



455794 

4.6.8.2 T&S-PC Drive Gears, BS 40, RC, lockable 

1 

1 


silver Size 5 BS 40 950 1701 - 1900 4 5 455794 

Size 6 BS 40 950 1901 - 2100 4 5 455795 

Size 7 BS 40 950 2101 - 2300 4 5 455796 

Size 8 BS 40 950 2301 - 2400 4 5 455797 

106



4.7 Width Connectors and Drive Gear Extensions 

455519 

4.7.1 T&S-PC Width Connector Set 

with 1 i.S. 1 silver Size 1 720 - 1050 1 5 455519 

Size 2 1051 - 1450 1 5 455520 

1451 - 1850 1 5 455521 

Size 4 1851 - 2000 1 5 455522 

1 

Contents: 2 x width connectors 

455612 

4.7.2 T&S-PC Drive Gear Extension 

Extension for lever-operated drive-gear T&S-PC croppable to 200mm 400 silver 10 465256 

SKB-Z extension piece croppable to 200mm with 1 i.S. 400 silver with 1 i.S. 10 455612 

107



4.8 Strikers, Frame Components and Mishandling-Devices 

465255 465254 

4.8.1 T&S-PC Strikers, for Timber, 4 mm Air Gap 

EH striker for 4mm air gap, 13 offset SKB-Z silver 10 465255 

EH striker for 4mm air gap, 9mm offset SKB-Z silver 10 465254 

96563 34921 




96564 34902 




96860 34943 34980 

4.8.4 Strikers for 12mm Air Gap, 18mm Euro-Rebate 


Striker 18mm Euro-rebate double screw fixing silver 200 34943 


96561 34981 

4.8.5 i.S. Strikers for 12mm Air Gap, 20mm Euro-Rebate 



108



455738 

4.8.6 T&S-PC Mishandling-Device Pack for Timber 

Mishandling-device pack T&S-PC Euro-rebate 18mm 1 right silver 25 455738 

left silver 25 455739 

Mishandling-device pack T&S-PC Euro-rebate 20mm 1 right silver 25 455740 


Mishandling-device pack T&S-PC for Euro-groove 7/8/4 1 right silver 25 455742 


Mishandling-device pack T&S-PC for 4mm air gap, 13mm offset 1 right silver 10 465251 


Mishandling-device pack T&S-PC for 4mm air gap, 9mm offset 1 right silver 25 455744 


1 

Contents: 1 x T&S-PC mishandling-device, 1 x screw, 1 x frame component 

109



4.9 Handle Sets 

455685 

4.9.1 T&S-PC Handle Set 

brown left 1 455685 

right 1 455686 

Bronze SKB left 1 455687 

right 1 455688 

Cream-white left 1 455689 

right 1 455690 

silver left 1 455691 

right 1 455692 

white left 1 455693 

right 1 455694 

455762 

4.9.2 T&S-PC Handle Set, lockable 

brown left 1 455762 

right 1 455763 

Bronze SKB left 1 455764 

right 1 455765 

Cream-white left 1 455766 

right 1 455767 

silver left 1 455768 

right 1 455769 

white left 1 455770 

right 1 455771 

455697 

4.9.3 Coupling Flap for T&S-PC Handle Sets 

1 

for 9mm offset 50 455697 

for 13mm offset 50 455698 

1 

On 9 mm fittings axis > rebate-leg thickness from 15-24 mm. On 13 mm fittings axis > rebate-leg thickness from 15-20 mm. 

110



455772 

4.9.4 Interior T&S-PC Handle Set 

brown 1 455772 

Bronze SKB 1 455773 

silver 1 455774 

white 1 455775 

455776 

4.9.5 Interior T&S-PC Handle Set, lockable 

brown 1 455776 


silver 1 455778 

white 1 455779 

455780 

4.9.6 Interior T&S-PC Handle Set for Profile Cylinders 

brown 1 455780 


Cream-white 1 455782 

silver 1 455783 

white 1 455784 

111



455785 

4.9.7 Exterior T&S-PC Handle Set for Profile Cylinders 

brown 1 455785 


Cream-white 1 455787 

silver 1 455788 

white 1 455789 

11164 

4.9.8 Interior Cover Plate for Round Cylinders 

silver 20 11316 

Titanium 20 11166 

White RAL 9016 20 11164 

11152 

4.9.9 Exterior Cover Plate for Round Cylinders 

silver 20 11156 

Titanium 20 11159 

White RAL 9016 20 11152 

112




455672 


silver 6070 10 455672 

455673 


silver 6080 50 455673 

white 6080 50 455674 

brown 6080 50 455675 

dark bronze 6080 50 455676 

Cream-white 6080 50 455677 

455664 

4.10.3 T&S-S/SE/PC Bottom Roller Track 

silver 6070 10 455664 

brown 6070 10 455665 

dark bronze 6070 10 455666 

465181 


silver 5170 10 455667 

2036 10 465181 

white 5170 10 455668 

2036 10 465182 

brown 5170 10 455669 

2036 10 465183 

dark bronze 5170 10 455670 

2036 10 465184 

Cream-white 5170 10 455671 

2036 10 465185 

455683 

4.10.5 Connecting Rod 


113




455648 

4.11.1 Accessories Bag for T&S-S/SE/PC 

silver 40 1 455648 

white 40 1 455649 

brown 40 1 455650 



1 



465276 

4.11.2 Accessories Bag for T&S-PC Guide Track 

Accessories bag for guide track T&S 50 465276 

455652 

4.11.3 Cover for T&S-PC Scissor-Stay Arm 

1 

Contents: 2 x cover caps 

White 50 1 455652 

Silver 50 1 455654 

Brown 50 1 455656 

Bronze SKB 50 1 455658 


465277 



114



4.12 Jigs 

455659 455661 465150 

465173 465174 465175 

465177 

4.12.1 Jigs for T&S-PC 

Jig case for T&S 1 1 455659 

Jig for routing scissors-stays and T&S-PC handles 1 455661 

Jig for T&S lockable espagnolettes for BS 17,5 - 50 1 465150 




Routing template for T&S-PC retaining device for 4mm air gap 1 465176 

Routing template for T&S mishandling-device for 4mm air gap 1 465177 

Spare Clamp for T&S 1 465245 

1 

Contents: Routing jig for scissor stays and T&S-PC handles, jig for T&S lockable drive-gear for BS 17.5 - 50, clamping jig to position the T&S guide tracks and roller 

tracks, jig to centre the screw holes for T&S rollers, installation jig for T&S control module, drill bit centring device, slider release, drill 3.2 mm, drill 4 mm, routing cutter 

6 mm, Torx wrench T25, Torx wrench T40 

4.12.2 Striker Positioning Jigs for T&S-PC 

Striker positioning jig for T&S-PC drive gear and height connector with 50mm retainer 1701 - 2400 0 - 0 1 211612 

900 - 1700 0 - 0 1 211611 

Striker positioning jig for T&S-PC link gear / width related components with 50mm retainer 0 - 0 720 - 2000 1 211614 

115



4.13 Profile Sheet — Accessories for T&S-SE/PC 

0 

Profile 

T&S-SE/PC 

striker plate set 

T&S-PC mishandling-device 

left 

T&S-PC mishandling-device 

right 

Veka Topline MD/AD 455699 455723 455722 

Softline 70 AD/MD 455699 455723 455722 

Brügmann AD/MD 455699 455723 455722 

Inoutic AD/MD 100/2000AD 455700 455727 455726 

Arcade/Elit/Prestige 455700 455727 455726 

Aluplast Ideal 4000/5000/6000/8000 455701 455729 455728 

Dimex Komfort 6.0 455701 455729 455728 

Schüco Corona AS/MD 455701 455729 455728 

Rehau S730/Brillant/Thermo Design 455702 455729 455728 

Gealan S3000/S7000/S8000 455703 455731 455730 

KBE System 70 455703 455731 455730 

Kömmerling Gold 455703 455731 455730 

Trocal Innonova 70 AD/MD 455704 455733 455732 

Alu Fusion/Comfort 455704 455733 455732 

Knipping 4010 455704 455733 455732 

Kömmerling Eurodur Futur 455705 455735 455734 

Kömmerling Eurodur MPF 455705 455735 455734 

Kömmerling Eurodur 3S 455705 455735 455734 

Aluplast Ideal 2000/3000 455706 455729 455728 

Dimex Acord 455706 455729 455728 

LB PAD 455706 455729 455728 

Schüco Corona CT70/Si82/AD/MD 455706 455729 455728 

Gealan S6000 455707 455731 455730 

Deceuninck Mondial/Klassik 455707 455731 455730 

Komarek Serie Riva 6 455707 455731 455730 

Trocal Innonova 2000 455708 455737 455736 

Knipping Innonova 70 455708 455737 455736 

Knipping SK 4000 455708 455737 455736 

Roplasto 6001 MD 455709 455747 455746 

Heroal 065 455709 455747 455746 

Rehau S702/S705/S707/S709 455709 455747 455746 

Edil Plastix/MBU; Milani-Resine 455709 455747 455746 

Bröckelmann LK (KSB220) 455709 455747 455746 

KBE MD 455710 455749 455748 

Deceuninck Mondial 2000 455712 455751 455750 

Wymar 2000 455712 455751 455750 

Salamander Design 2D und 3D 455713 455753 455752 

Salamander Design MD 455713 455753 455752 

Aluplast Intertec WD 455715 455755 455754 

Trocal Confort 455718 455757 455756 

Alphacan System Class 455719 455759 455758 

Actual 500 455720 455761 455760 

116


___________________________________________________________________________________ 

5.1 Locked- and Tilt-Monitoring ________________________________________________ 118 

5.2 T&S Drive Gear Extension__________________________________________________ 118 

5.3 Magnetic Switch for Locked and Tilt Monitoring via VdS B/C _____________________ 118 

5.4 Magnetic Switch for Locked Monitoring via VdS C______________________________ 118 

5.5 Profile Packer for Magnetic Contact _________________________________________ 118 

5.6 Spacer with Magnetic Cam _________________________________________________ 119 

5.7 Electronic Cable Junction without Contacts for Sliding Elements _________________ 119 

5.8 Cable Junction Accessories for Sliding Elements ______________________________ 119 

117

Locking Monitoring 



54795 

5.1 Locked- and Tilt-Monitoring 

Extension piece not croppable 130 silver 20 54795 

203783 

5.2 T&S Drive Gear Extension 

T&S-PC extension piece silver 1 203783 

Faceplate extension MM, extendable silver 20 201755 

44358 

5.3 Magnetic Switch for Locked and Tilt Monitoring via VdS B/C 

Magnetic switch L&S for central heating control silver 10 44360 1 

Magnetic switch KVS for locking and tilt monitoring with 10m cable (0.14mm²) silver 10 454872 

Magnetic switch KVS for locking and tilt monitoring with 15m cable (0.22mm²) silver 10 454829 

Magnetic switch KVS for locking and tilt monitoring with 6m cable (0.14mm²) silver 10 44358 2 

1 Part number Yellow: 44359 (for use on yellow passivated fittings) 

2 

Part number Yellow: 44357 (for use on yellow passivated fittings) 

455426 455427 

5.4 Magnetic Switch for Locked Monitoring via VdS C 

Screw in magnetic contact VS for locking and tilt monitoring with 6m cable (0.14mm²) silver 10 455426 

Magnetic contact For combined opening and locking monitoring with 6m cable (0.14mm²) silver 10 455427 

454906 

5.5 Profile Packer for Magnetic Contact 

Profile packer for magnetic contact Typ 1 KS-KVS (PVC) 1 white 10 454906 




Profile packer for magnetic contact Typ 5 KS-KVS (PVC+timber) 1 white 10 454910 


1 

To select the correct Profile Packer please refer to the latest Profile Datasheet. 

118


57425 

5.6 Spacer with Magnetic Cam 

Adaptor with contactor KVS MM silver 50 57425 

458062 

5.7 Electronic Cable Junction without Contacts for Sliding Elements 

Electronic transmitter without contacts For alarm glass and glass breakage sensors 1 458062 

455431 455429 

5.8 Cable Junction Accessories for Sliding Elements 

Construction case set For electronic cable junction without contacts brown 1 455432 

Fixing frame For electronic cable junction without contacts brown 1 455430 

Construction case set For electronic cable junction without contacts white 1 455431 

Fixing frame For electronic cable junction without contacts white 1 455429 

119

Technical and General Information 

6 Technical and General Information 


6.1 ISO-Certificate 

120


6.2 General Product Information 

Technical 0 and General Information 

Lift&Slide fittings for window and balcony-door sashes 

According to the defined manufacturer‘s liability described in 

the “product liability law“ (§ 4), the following information regarding 

sliding fittings for window and balcony door sashes should 

be observed. Non-compliance exempts the manufacturer of 

his liability. 

1. Product information and specified 

application 

Sliding fittings as covered by this definition, are fittings for sliding 

sashes for windows and balcony doors that are mainly 

used as glazed exterior structures. Fixed-glazing-units and/or 

further sashes (e.g. Turn-Only sashes for cleaning purposes) 

can be situated in a window element in combination with the sliding 

sashes. 

The sashes that are equipped with these sliding fittings are capable 

of: 

a) sliding, 

b) lifting and sliding, 

c) tilting and sliding (only T&S), 

d) lifting, tilting and sliding (only T&S), 

e) parallel-retracting and sliding, 

f) tilting, parallel-retracting and sliding (only T&S). 

Sliding fittings are used on vertically installed windows and 

balcony doors made of timber, PVC, aluminium or steel and 

their corresponding material combinations. Sliding fittings as 

covered by this definition, are equipped with a locking mechanism 

that locks the sliding sash to the frame, as well as rollers 

located on the bottom horizontal side of the sliding sash. In addition, 

scissor stay-arms for tilting and mechanisms to lift and/ 

or parallel-retract the sashes can be specified. By means of the 

fittings, the sashes are locked, brought into the ventilation position 

and pushed to the side. 

Differing applications do not correspond to its stipulated use. 

Burglar-inhibiting window and balcony doors, window and balcony 

doors for damp rooms and those for use in environments 

with aggressive, corrosive air content, require fittings adapted 

for the respective application and individually agreed upon performance 

characteristics. 

Opened windows and balcony door sashes achieve only a 

shielding function and do not meet any demands on joint impermeability, 

water tightness, sound insulation, thermal insulation, 

and burglary inhibition. 

In case of wind and draught, the window and balcony-door sashes 

must be closed and locked. Wind and draught as covered 

by this definition is present, if a window or balcony door sash 

while in one of its opening positions, can open or close on its 

own, in an uncontrolled manner by means of either air pressure 

or air suction. 

The resistance against wind loads in a closed and locked state 

is dependent on the respective designs of windows and balcony 

doors. Should wind loading in accordance with DIN EN 

12210 be carried out (in particular pressure test p³), suitable fittings 

compilations are to be matched in relation to the respective 

window design and frame material, and each case 

individually agreed upon. 

Generally speaking, the sliding fittings can fulfil the demands 

for barrier-free dwellings in accordance with DIN 18025. However 

corresponding fittings compilations and installations for 

windows and balcony doors are necessary, which must be 

coordinated and each case individually agreed upon. 

2. Misuse 

Misuse - therefore not the specified product utilisation - of sliding 

fittings for windows and balcony doors occurs in particular: 

a) If obstacles are inserted in the opening vicinity, thus preventing 

its proper specified use. 

b) If additional loads are put on windows or balcony-door sashes 

c) If while sliding over and/or locking, someone reaches between 

the sash and frame, or a person or body-part is in this 

vicinity. 

3. Liability 

The respective entire fittings set may only consist of fittings 

components from MACO‘s sliding and Tilt&Slide fittings. We 

accept no liability for improperly installed systems and/or the 

use of non-original or non factory approved system accessory 

parts. 

4. Product performance 

4.1. Maximum sash weights and sash rebate dimensions 

The listed maximum sash weights for the individual fittings version 

may not be exceeded. The component with the least permissible 

load-carrying capacity determines the maximum sash 

weight. Application diagrams and component classification are 

to be adhered. 

4.2. Combination of fittings 

The manufacturers‘ regulations concerning the combination of 

fittings are obligatory (for example: the exterior-handle arrangement, 

the fittings layout for burglar-inhibiting windows and 

balcony door sashes). 

5. Product maintenance 

Security relevant fittings components are to be examined at 

least once a year for stability and wear and tear. Depending on 

the requirements, the fixing screws are to be tightened and/or 

parts to be replaced. In addition to this, the following maintenance 

work is to be carried out annually: 

a) All movable parts and all locking points of the sliding fittings 

are to be lubricated and tested. 

121


b) Only cleaning and maintenance agents, which do not damage 

the corrosion protection of the fittings components, are to 

be used. 

The fittings adjustments as well as replacing parts are to be 

carried out by a specialist company. When surface treating - for 

example when painting or varnishing - the windows‘ and balcony 

doors fittings are excluded from this process and is also 

to be protected against any soiling. 

5.1. Preservation of the surface finish 

Electrolytically applied zinc coatings are not attacked in a normal 

room climate, if no condensation can form on the fittings or 

occasionally formed condensation can dry rapidly. 

In order to permanently preserve the fittings surface quality and 

to avoid deterioration by corrosion, it is imperative to observe 

the following points: 

a) The fittings and/or the rebate areas are to be ventilated sufficiently 

in particular during the building phase so that they 

are not exposed to direct wetness or to condensation. 

b) The fittings are to be kept free from deposits and soiling from 

building materials (building dust, plaster, cement etc.). 

c) Aggressive vapours in the rebate area (for example: through 

formic acid, acetic acid, ammonia, amine or ammonia compounds, 

aldehydes, phenols or tannic acid etc.) in connection 

with small formations of condensation can lead to fast 

corrosion of the fittings. In the case of such aggressive vapours 

occurring, a general adequate ventilation of the rebate 

areas of windows and balcony doors is to be ensured. 

This is particularly valid for windows and balcony doors 

made of oak or other types of timber with a high concentration 

of (tannic-) acid. 

d) No acetic-acid or cross-linked acidic sealing compounds or 

those with the above mentioned contents may be used, since 

both the direct contact with the sealing compound and its 

vaporisation can attack the surface. 

e) The fittings may only be cleaned with mild, pH-neutral cleaning 

agent in diluted form. Under no circumstances may aggressive, 

acidiferous cleaners or abrasive cleaning agents 

whose contents are listed in the above paragraph be used. 

6. Information and instruction obligations 

Fulfilling our obligation to issue information and instructions, 

the following documentation is available in accordance with the 

“Product Liability Code“: 

a) For planning engineers: “planning documents“ 

b) For specialised dealers: “catalogues“ 

c) For fabricators “installation instructions“ and “factory drawings“ 

d) For builders and end users: “service & maintenance instructions“ 

as well as “operating manuals“ (T&S) 

In order to ensure proper functioning of sliding fittings on window 

and balcony-door sashes: 

a) Planning engineers are obliged to request and comply with 

the manufacturer‘s product information. 

b) Specialised dealers are obliged to observe and request product 

information from the manufacturer and to pass this on 

to the fabricators, in particular installation instructions, factory 

drawings, service & maintenance instructions as well as 

operating instructions. 

c) Fabricators are obliged to observe the product information 

and in particular, to request service & maintenance instructions 

as well as operating manuals from the manufacturer or 

specialised dealer, and to pass these on to the builders and 

end users. 

7. Related fittings use 

Related fittings with rollers and locking mechanisms - for example 

fittings for Slide&Fold doors - is to be treated accordingly 

with regard to product information and intended use, 

misuse, product features, product maintenance and the obligation 

to issue information & instructions. 

8. Liability exclusion 

The manufacturer‘s liability can among other things, also be excluded 

as a result of the fact that: 

a) The error has arisen from a legal regulation or government 

authority regulation, with which the product had to comply 

with. 

b) The products characteristics were scientifically and technically 

state-of-the-art at that point in time and that the error 

could not be recognised by the person who put it into circulation. 

c) If the person in question has only produced the raw material 

or a component which caused the error due to the design of 

the product in which the raw material or component has 

been incorporated, or due to the manufacturers‘ instructions 

for the product. 

9. Application 

Application ranges for Lift&Slide fittings: 

- Lift&Slide doors as 2 - 6 pieced units; 

- Lift&Slide windows as 2 - 4 pieced units; 

10. Version 

Lift&Slide fittings 400 kg 

Fittings for single sashes up to 400 kg, equipped with 2-roll rollers 

and additional roller for clampable connecting rod. Synthetically 

covered rolls with grooved ball bearings. Sash thickness 

from 56 up to 98 mm. Sash distance 28, 23 and 10 mm. Lift 

drive-gear with 27.5 and 37.5 mm backset, designed for use 

with profile cylinders. 

Lift&Slide fittings HS 300 kg 

Fittings for single sashes up to 300 kg, equipped with 2-roll rollers 

for clampable connecting rod. Synthetically covered rolls 

with grooved ball bearings. Sash thickness from 56 up to 98 

mm. Sash distance 28, 23 and 10 mm. Lift drive-gear with 27.5 

and 37.5 mm backset, designed for use with profile cylinders. 

Lift&Slide fittings HS 150 kg 

Fittings for single sashes up to 150 kg, equipped with 2-roll rollers, 

for clampable connecting rod. Synthetically covered rolls 

122


with grooved ball bearings. Sash thickness from 56 up to 98 

mm. Sash distance 28, 23 and 10 mm. Lift drive-gear with 25, 

27.5 and 37.5 mm backset, designed for use with profile cylinders. 

11. Rotatable handles 

The aluminium HARMONY L&S handles‘ fixings are concealed. 

The rosettes are equipped with robust click-in positions 

and firm lugs. 

Rotatable handles without PC hole are the standard version. 

Rotatable handles with PC-hole, rotatable handles for operation 

on both sides with PC-hole. 

12. Frame covers, thresholds, tracks 

Top guide tracks 

Version “with cover“: 

Aluminium guide track for Lift&Slide, sash thickness from 56 up 

to 68 mm. 

Version “Universal low“: 


to 68 mm. 

Top C-track: 


to 68 mm. 

GFRP (glass fibre reinforced plastic) thresholds 

For sash thicknesses from 56 - 98 mm. 

Aluminium thresholds 

Frame cover with threshold, sash thickness from 56 up to 68 

mm, sash distance 23 or 10 mm. 

Frame cover with threshold and clip-in track, sash thickness 

from 56 up to 68 mm, sash distance 23 or 10 mm. 

Frame cover 

Aluminium cover for bottom frame timber, sash thickness from 

56 up to 68 mm, sash distance 23 or 10 mm. 

Low roller track 

Track for finished floors. 

Bottom roller track / bottom C-track 

The top C-track can also be used on the bottom, however only 

in conjunction with a clip-in track. 

13. Standard colours 

Lift&Slide and Lift&Slide&Tilt fittings are available in the following 

standard colours: 

-Visible aluminium fittings components “Silver anodised“ 

-Visible aluminium fittings components “Bronze L&S anodised“ 

-Visible aluminium fittings components “Dark brown anodised“ 

-Visible GFRP fittings components “Silver pigmented“ 

14. Materials, corrosion protection 

The fittings components are made of high-quality steel, zinc 

diecast and aluminium alloys. Depending on the material, the 

components are zinc-plated and passivated or anodised. 

Application Range: 

T&S-S: 160kg 

T&S-SE: 160kg 

T&S-PC: 160kg 

(200kg when using Tandem rollers) 

L&S: 150kg 

L&S: 300kg 

L&S: 400kg 

SRW: 

SRH: 

SRW: 

SRH: 

SRW: 

SRH: 

SW: 

SH: 

SW: 

SH: 

SW: 

SH: 

620 - 1650 

1000 - 2350 

650 - 1650 

1000 - 2350 

720 - 2000 

900 - 2700 

630 - 2200 

730 - 2860 

740 - 3385 

730 - 2860 

1200 - 3385 

730 - 2860 

123


6.3 User and Maintenance Instructions T&S-S 


124


125


6.4 User and Maintenance Instructions T&S-SE 


126


127


6.5 User and Maintenance Instructions T&S-PC 


128


129


6.6 Tender Specifications 


Tilt&Slide doors 

Tilt&Slide fittings, lockable 

- T&S-PC Tilt&Slide fittings 

(with positive control) with positive-controlled scissor stays for 

sashes up to 200 kg and 2000 mm sash rebate width. 

- Rollers each equipped with 2 rolls and height-adjustment. 

- Central locking system with fixed handle-height and singlehanded 

operation. 

- The scissor stays in the scissor-stay slider are removable. 

- Roller track equipped with control module and buffer stop 

- All fittings components equipped with adjustable security 

cams. 

- Tilt&Slide fittings T&S-SE 

(self-engaging) for sashes up to 160 kg and 1650 mm sash rebate 

width. 


- Central locking system with fixed/variable handle-height and 

single-handed operation. 


- Bottom corner centre locks equipped with adjustable security 

cams. 

- With lockable drive-gear, designed for use with profile cylinders. 


- T&S-PC Tilt&Slide fittings 

(with positive control) with positive-controlled scissor stays for 

sashes up to 200 kg and 2000 mm sash rebate width. 


- Central locking system with fixed handle-height and singlehanded 

operation. 

- The scissor stays in the scissor-stay slider are removable. 


- All fittings components equipped with adjustable security 

cams. 

Tilt&Slide fittings 

- T&S-S Tilt&Slide fittings 

(standard) for sashes up to 160 kg and 1650 mm sash rebate 

width. 





- Bottom corner elements equipped with adjustable security 

cams and security strikers. 


Tilt&Slide fittings 

- Tilt&Slide fittings T&S-SE 

(self-engaging) for sashes up to 160 kg and 1650 mm sash rebate 

width. 





- Bottom corner centre locks equipped with adjustable security 

cams. 


- T&S-S Tilt&Slide fittings 

(standard) for sashes up to 160 kg and 1650 mm sash rebate 

width. 



single-handed operation 


- Bottom corner elements equipped with adjustable security 

cams and security strikers. 


130


Lift&Slide fittings 

- Lift&Slide fittings for sashes up to 150 kg and 2200 mm sash 

width. 

- Rollers each equipped with 2 rolls. 

- Lift&Slide drive-gear equipped with 2 or 3 point locking, 

with aluminium face-plate, designed for use with profile cylinders, 

operable with Lift&Slide handle, without PC hole, exterior 

sliding recessed grip. 

Lift&Slide fittings, lockable 


width. 




operable with Lift&Slide handle, exterior sliding recessed 

grip. 

- With exterior Lift&Slide handle and interior PC hole. 



width. 




operable with Lift&Slide handle, without PC hole, exterior 

sliding recessed grip. 



width. 




operable with Lift&Slide handle, exterior sliding recessed 

grip. 



3 



width. 

- Rollers each equipped with 2 rolls + 2 additional rollers. 

- Lift&Slide drive-gear equipped with 2 or 3 point locking, with 

aluminium face-plate, designed for use with profile cylinders, 

operable with Lift&Slide handle, exterior sliding recessed grip. 



width. 

- Rollers each equipped with 2 rolls + 2 additional rollers. 

- Lift&Slide drive-gear equipped with 2 or 3 point locking, with 

aluminium face-plate, designed for use with profile cylinders, 

operable with Lift&Slide handle, exterior sliding recessed grip. 


131


T&S-S T&S-SE T&S-PC 750478 

2 1 

L&S 

L&S – Diagram C 

Opening type right 

L&S – Diagram C 

Opening type left 

132

MACO 

RAIL-SYSTEMS 

MAYER & CO BESCHLÄGE GMBH 

ALPENSTRASSE 173 

A-5020 SALZBURG 

TEL: +43 (0)662 6196-0 

FAX: +43 (0)662 6196-1449 

maco@maco.at 

www.maco.at 

MACO DOOR & WINDOW 

HARDWARE (U.K.) LTD 

EUROLINK INDUSTRIAL CENTRE 

CASTLE ROAD, SITTINGBOURNE 

KENT ME10 3LY 

TEL +44 (0)1795 433900 

FAX +44 (0)1795 433901 

maco@macouk.net 

www.macouk.net 

Order.-No. 756516 – Date: June 2009 

All rights reserved and subject to change.

download (7MB) - MACO

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?