m -f - Welcome to Qualital Downloads

SCHEDA PRODOTTO UNIQUE
APPEAL-MIND-FLYER-LORICA
“UNIQUE” PRODUCT SHEET
APPEAL-MIND-FLYER-LORICA
LA PRESENTE SCHEDA PRODOTTO OTTEMPERA ALLE DISPOSIZIONI DELLA LEGGE DEL 10 APRILE 1991 n. 126 “NORME PER
L’INFORMAZIONE DEL CONSUMATORE” E AL DECRETO DELL’ 8 FEBBRAIO 1997 n. 101 “REGOLAMENTO DI ATTUAZIONE”.
THIS PRODUCT SHEET IS CONFORMED TO THE PROVISIONS OF LAW NO. 126 OF 10 APRIL 1991, “PROVISIONS FOR CONSUMER
INFORMATION”, AND DECREE NO. 101 OF 8 FEBRUARY 1997, “IMPLEMENTATION REGULATION”.
34

PRODUCT IDENTIFYING DATA
Below are the main characteristics of the products, materials and components used.
Product Sheet
FLUSH DOOR: WOOD
BLEACHED OAK · LIGHT WALNUT · CANALETTO WALNUT · CHERRY
Full hollow-core door, thickness 36-38 mm.
Hot-assembled with 5 mm MDF sheets on a wooden frame with honeycomb.
The door is then processed for uniform thickness and veneered on both sides with selected natural wood veneers.
The front and rear sides of the door are finished with a silver-anodised aluminium profile that brings final door thickness
to 40 mm.
Cleaning: Use a soft cloth moistened with water.
Never use chemical solvents, abrasive detergents, or alkaline substances.
CLASSIC LIGHT · CLASSIC DARK
Full hollow-core door, thickness 38 mm.
Hot-assembled with 5 mm MDF sheets on a wooden frame with honeycomb.
The door is then processed for uniform thickness and veneered on both sides with wood veneers.
The front and rear sides of the door are finished with a silver-anodised aluminium profile that brings final door thickness
to 40 mm.
Cleaning: Use a soft cloth moistened with water.
Never use chemical solvents, abrasive detergents, or alkaline substances.
FLUSH DOOR: LACQUER
PERLA
Full hollow-core door, thickness 38 mm, Hot-assembled with 5 mm MDF sheets on a wooden frame with honeycomb.
The Perla version door is lacquered with RAL 9010 polyurethane GLOSS 20 paint.
The front and rear sides of Unique doors are finished with a silver-anodised aluminium profile that brings final door thickness
to 40 mm
Cleaning: Use a soft cloth moistened with water.
Never use chemical solvents, abrasive detergents, or alkaline substances.
FLUSH DOOR: LORICA
Full door with external thickness 8 mm and internal thickness 8 mm.
Inside the panels there is an aluminium honeycomb to guarantee a degree of rigidity that makes the door unique in
its category. Doors are completed with veneers of selected natural wood.
Cleaning: Use a soft cloth moistened with water. Never use chemical solvents, abrasive detergents,
or alkaline substances.
Unique
by
®
37

Product Sheet
DOOR: GLASS
FOGLIA· ONDA · CORNICE · SANDBLASTED · TRANSPARENT · ETCHED · ETNO ·
GESTO
Glass doors comply with the UNI EN 12150 safety standard, thanks to the tempering and manufacturing processes
used to produce all our glass panels. Glass thicknesses are 10 mm for the Appeal line, 8 mm for the Mind and Lorica
lines and 5 mm each for the two panels of the Flyer line.
For models Foglia, Onda, Cornice, Etno and Gesto, the glass is always sandblasted, and is worked with artisan engravings
and with exclusive Unique by Scrigno designs. The two tempered panels of the Flyer line (thickness 5 mm each)
are assembled on an aluminium frame, creating an attractive play of transparencies that is quite unique.
Cleaning:
SANDBLASTED GLASS: (central decoration): Foglia, Onda, Cornice, Etno, Gesto. Particular attention is required.
1. Remove dust with a dry cloth or feather duster.
2. Then moisten a soft or microfibre cloth with water and rub the glass energetically.
3. Dry the glass with a dry cloth.
· Never spray water directly onto the glass.
· Never use chemical solvents or abrasive detergents.
ETCHED OR TRANSPARENT GLASS
No particular precautions are needed.
1. Moisten a soft or microfibre cloth with water (do not spray water directly onto the glass).
2. Dry the glass with a dry cloth.
· Never use chemical solvents or abrasive detergents.
DOOR POSTS
Door posts and shaped and rounded edgings are cut to size and pre-arranged for assembly at 45°. They are also fitted
with a telescopic system with a wooden strip that makes them adaptable for different wall thicknesses.
The door post and cover (for the external wall) are made in silver-anodised aluminium, and on request can be supplied
finished with selected natural wood veneers in matching shades. The veneers covering the aluminium profiles
are made from natural wood, and may therefore have joints.
Cleaning:
· for the doorpost in silver-anodised aluminium, use a soft cloth moistened with water or cleaning alcohol.
· for the doorpost with wooden veneer, use a soft cloth moistened with water.
· Never use chemical solvents, abrasive detergents, or alkaline substances.
38