PDF Brochure - Deck Builder Outlet.com Parts Store

F-DECKCODE07.indd 1
RECOMMENDATIONS FOR THE CONSTRUCTION OF CODE-COMPLIANT DECKS
800-999-5099 | www.strongtie.com
6/13/2007 10:53:33 AM
Screw Coatings/Materials
for Corrosion Resistance
Metal fasteners can corrode and may lose load-carrying
capacity when installed in corrosive environments or
when exposed to corrosive materials. Quik Guard ®
coated fasteners are appropriate for many exterior
applications and environments. Stainless steel is the
most effective solution to corrosion risk.
Quik Guard ®
Quik Guard is a proprietary double barrier coating that provides
a level of corrosion protection suitable for many exterior uses
and preservative-treated wood applications.
Quik Drive ®
Quik Drive auto-feed screw driving systems are ideal for
high volume deck applications where maximum efficiency
is essential. With easy-loading collated screw strips, precise
countersink adjustment and a patented auto-advance
mechanism, Quik Drive systems can save hours on almost
any fastening project. For
more information, visit
www.strongtie.com.
Deck Screws
305 Stainless Steel
305 stainless steel provides premium corrosion resistance in
higher-exposure conditions. Fasteners made of stainless steel
are ideal for exterior use and provide very good corrosion
protection for many preservative-treated wood applications.
Deck Guide
Simpson Strong-Tie created the
Deck Framing Connection Guide
to help contractors and do-ityourselfers
build a code-compliant,
safe deck per the requirements
of the building codes. The guide
identifies the critical connections
within a deck and recommends
connectors and fasteners to help
meet code requirements. To order
or download a copy of the guide,
visit www.strongtie.com/safedeck.
P R O F E S S I O N A L S
Deck Framing Connection Guide
Deck Spacers
These small plastic spacers are quick and easy to install,
clipping onto the joist and keeping deck boards evenly spaced.
Once in place, Deck Spacers act as a shield for the top of the
deck joist, shedding debris and moisture away from the joists.
Deck Spacers meet composite deck manufacturing installation
guidelines and are available in
brown, gray and tan.
Corrosive environments, salt air or chemicals (including
some wood preservatives) may cause early failure.
See www.strongtie.com/info for proper use, limitations,
warnings and warranties.
For further information regarding deck applications using
preservative-treated lumber, see www.strongtie.com/info.
for Wood and
Composite Decking

Screws for Wood and Composite Decking
Composi-Lok
Screws for Composite Decking
Trim Head
Screws for Wood Decking
Composi-Lok composite decking screws combine
ease of installation and reliability with a finished look
that will compliment any deck.
• Cutting “wings” on the shaft counter bore the deck
board, helping to prevent fastener “spin out”—
a common problem in cold or wet conditions.
Trim Head wood screws are ideal for wood
decking, fencing and siding applications.
The low visibility of the trim head ensures
a clean, finished look.
• Nibs under the head of the screw make
countersinking easier.
• Cap-style head reduces mushrooming material,
ensuring a cleaner looking installation.
• The type 17 point allows for quick starts
and reduced splitting.
• Driver bits included in each package.
• Driver bits included in each package.
• Packaged in quantities of 70, 350 and 1,750.
• Packaged in quantities of 70, 350 and 1,750.
• Available in 2½" and 3" lengths with Quik Guard ®
coating in red, brown, gray and tan. Also available
in 305 stainless steel in 2½" and 3" lengths.
Red
• Available in 2½" and 3" lengths with Quik Guard ®
coating in red, brown, gray and tan. Also available
in 305 stainless steel in 2½" and 3" lengths.
Red
Brown
Brown
Tan
Tan
Gray
Gray
Stainless Steel
Stainless Steel
©2008 SIMPSON STRONG-TIE COMPANY INC. DIY-DECKSCREW08 5/08 exp. 6/10