HEX ARMOR HAND PROTECTION

INING | OIL & GAS | EXTRICATION 

UT | PUNCTURE | COLD | HEAT | ABRASION | NEEDLESTICK 

RIP | COMFORT | PERFORMANCE 

INING | OIL & GAS | EXTRICATION 

UT | PUNCTURE | COLD | HEAT | ABRASION | NEEDLESTICK 

RIP | COMFORT | PERFORMANCE 

EAL WORK DESERVES 

EAL PROTECTION 

TM 

PROTECT YOURSELF 

WITH THE INDUSTRY LEADER. 

TM 

TM

METAL | OIL | LUMBER | EXTRICATION | STEEL

At HexArmor ® , we believe safety 

is not a luxury, but a necessity. 

Since our inception, HexArmor ® has worked hand in hand with our customers to 

deliver the most innovative and effective technologies to keep people safe. 

Our belief is that every worker should be able to go home at night in the same condition he or 

she went to work. Excellence in safety is not a hollow promise; it is our goal and drive, every day. 

If you are like us, your commitment to employee health and safety has driven you to 

continually explore new ways to protect your employees. Our goal is to provide you with a 

wide array of HexArmor ® purpose-built tools, each one with a unique and exciting story. 

Each of our products has been researched, trialed, adapted, and improved upon 

with the invaluable assistance of the field professionals who are committed to 

employee safety. Through this special relationship, we are proud to offer the most 

comprehensive and specialized hand and arm protective equipment available today. 

Our mission has always been the same: to be the trusted advisors for your 

safety program. Over the years, we have become pretty good at listening 

to our customers, and we use that input to find safety solutions. 

I hope you find it a pleasure to work with our team of safety professionals. They 

have the experience and training to help you navigate the many available options 

and select the best products to help ensure the safety of your people. 

Steve VanErmen 

President & CEO 

steve@hexarmor.com 

877.MYARMOR | hexarmor.com Letter from the President I Page 3

HexArmor ® has partnered with HDM Inc. to design technologies with unique capabilities for the safety 

market. SuperFabric ® technology, by HDM Inc., is a finishing process that takes ordinary fabrics and 

transforms them into high-performance products collectively known as SuperFabric ® brand materials. 

These new protective fabrics can be engineered for optimum resistance to abrasions, lacerations, 

punctures, stains, and more, while remaining highly flexible. HexArmor ® utilizes variations of SuperFabric ® 

technologies that are directly integrated into high-performance products (gloves, arm, and body 

protection) through different patterns of cut/sewn and direct print technologies and processes. 

Unbeatable Cut Protection 

The HexArmor Elite ® collection of products uses 

SuperFabric ® brand material to provide cut resistance 

that exceeds ANSI/ISEA and CE Level 5. 

Industrial Puncture Resistance 

Many lacerations start out as a puncture. 

HexArmor Elite ® gloves provide protection from 

burrs, metal wires, slivers, and similar hazards. 

Needlestick Resistance 

HexArmor ® has developed a line of needlestickresistant 

products to keep hands safe from 

incidental contact with hypodermic needles. 

Multiple aligned layers of fabric arrest, trap, 

and block needles and other hazards. 

Abrasion Resistance 

HexArmor Elite ® products provide significantly 

higher abrasion resistance than standard 

competitive PPE, which means higher 

performance longer in the product’s life.

Advanced Technologies 

HexArmor ® has been a leader in technology and innovation since our founding. Our breakthroughs in 

materials, design, and functionality have changed the hand, arm, and body personal protective equipment 

(PPE) landscape, and they continue to redefine the standards of safety in the industrial sector. 

In addition to top-level cut, puncture, and abrasion resistance, we have outfitted our gloves and body 

protection with purpose-built technology created for a wide variety of hazards and applications. Our patented 

innovations are what make us today’s trusted advisor in the safety industry. 

Unparalleled Impact Resistance 

Our proprietary IR-X ® Impact Exoskeleton shields 

users’ entire back-of-hand, protecting every joint 

and knuckle from debilitating blows. Redesigned 

impact guards on our Rig Lizard ® gloves provide 

more flex points for comfort and dexterity. 

A Grip for Every Job 

When you’re on the job site, you often encounter 

a variety of liquids, oils, muds, and other 

unidentified substances. Our products offer a 

wide variety of grip options to provide users with 

the appropriate grip for the task at hand. 

Waterproof 

Our H2X ® liner creates a waterproof barrier between 

your hands and wet hazards, keeping hands dry 

and comfortable. H2X ® also meets ASTM 

F1670/F1671 standards for bloodborne pathogen 

resistance and fluid-borne viral resistance. 

Cold and Warm Weather Solutions 

HexArmor ® Arctic gloves combine our H2X ® 

waterproof liner with a C40 Thinsulate liner, creating 

a two-layer barrier from wind, water, and chill. 

HexArmor ® Oasis gloves are made with HexVent ® 

technology, which creates a breathable heat-release 

system, keeping hands cool and comfortable. 

877.MYARMOR | hexarmor.com Technology I Page 5

Preventing Lacerations and Puncture Wounds 

Many lacerations start 

out as a puncture. 

A sharp edge, corner, 

burr, wire “wicker,” or 

other protruding hazard 

can penetrate the glove 

and scrape or cut skin. 

With synthetic leather 

or cotton gloves, the 

hazard will poke through the surface of the glove and 

tear laterally to create a laceration. While a glove may 

say it has “cut resistance,” it often lacks the puncture 

protection to stop lacerations. 

Standard Synthetic Leather Gloves 

Outer Shell 

Cut Injury 

Skin Surface 

HexArmor Elite ® 

Synthetic Leather Gloves 

Outer Shell 

Plates 

Skin Surface 

HexArmor Elite ® 

Synthetic Leather Gloves 

Outer Shell 

Proven Protection Against Punctures 

HexArmor Elite ® safety gloves are tested in both the lab 

and the field to validate the highest degree of puncture 

resistance and performance. 

Plates 

Skin Surface

The Next Generation of Impact Protection 

IR-X ® Impact Exoskeleton 

The most advanced HexArmor ® impact resistance 

comes with all the dexterity, all the comfort, and more 

protection than that offered by any other impactprotective 

glove on the market. Our proprietary IR-X ® 

technology shields our gloves with a full back-of-hand 

exoskeleton, so every joint and knuckle is protected 

from debilitating blows. IR-X ® smash guards are 

purpose-built to deflect the force of sudden impacts 

away from the impact point, rather than transferring 

force directly to the hand. This unique characteristic 

is what sets IR-X ® safety levels higher than the 

competition, and its flexibility is what makes 

the IR-X ® Impact Exoskeleton more comfortable 

and more dexterous than any other impact-resistant 

technology available. 

Competitive Impact Protection 

HexArmor ® IR-X ® Impact Guards 

Traditional 

Impact Guards 

Glove Shell 

Hand 

Bone 

HexArmor ® IR-X ® 

Glove Shell 

Hand 

Bone 

The HexArmor ® IR-X ® Impact Exoskeleton creates a 

barrier between your hand and impact and smash injuries. 

IR-X ® guards cover the entire back-of-hand, including 

the knuckles, where the majority of impacts occur. 


Specialized Grips for the Oil Industry 

In the oil industry, maintaining grip is a constant challenge. The presence of 

lubricating fluids, friction reducers, grease, oil-based muds, and honey oils makes 

tools and pipes slick and hard to grip. Poor grip can lead to hand fatigue, as well 

as strains and sprains from the increased effort required to sustain grip. HexArmor ® 

oil and gas safety gloves offer a variety of grip options, all designed specifically 

to meet the technical challenges for maintaining grip in the petroleum industry. 

HexArmor Mud Grip ® 

Synthetic leather palm with PVC dots. The surface wicks away 

lubricant, allowing PVC dots to create friction and improve grip on 

metal tools. A good all-around grip, it does well in the wet conditions 

often found with drilling and oil-based muds. It also provides 

excellent dry grip for general tasks. Found on the 4021X and 4026. 

Mud Grip+ 

Synthetic leather palm with larger PVC dots which create friction 

and improve grip on metal tools. Good all-around grip that does 

well in wet conditions often found with drilling and oil based muds. 

Also provides excellent dry grip for general tasks. Found on the 2028. 

Gator Grip Technology ® 

Highly specialized SuperFabric ® brand material palm with 

PVC dots. SuperFabric ® guard plates that bite through and 

channel away lubricants, creating a “snow tire” effect that allows 

the user to grip oily or lubricated parts and tools. The PVC dots 

provide added friction for a tacky grip. Found on the 4020X.

TP-X ® 

Technical protective palm material that works well in oils and fluids. 

The surface does not absorb wetness, so grip is maintained in the 

presence of lubricants. Best for regular (light to medium) oily or wet 

conditions. Provides more abrasion resistance than synthetic leather, 

and some industrial puncture resistance. Found on the 2021, 2022, 

2023, 2029, 4010, 4031 and 4036. 

TP-X+ 

A more robust, heavy-duty TP-X ® material that provides 

better cut, puncture and abrasion resistance and improved 

grip. The raised texture creates channels or grooves 

in the material, so it has enhanced grip over time. May 

provide more resistance to heat. Found on the 2025. 

Canvas Cotton 

Brightly colored cotton canvas material complies with hand 

safety standards requiring a bright palm color. Similar grip 

to standard cotton gloves used in the oil industry, but can be 

washed and reused many times, unlike cotton gloves. Good for 

working with honey oils. This palm provides a good grip when it 

gets oily because it is easily wiped clean. Found on the 2024. 

Sandy Nitrile Palm Dip 

Sandy nitrile is good for handling graphite dust, which can make 

other palm grips slick. Adds a high level of abrasion resistance. 

Good dry grip. Lightweight, providing excellent dexterity. A good 

choice for incidental contact with unknown substances such as 

solvents, chemicals, oils, etc. Found on the 2090 and 9013. 


Our Product Collections 

HexArmor Elite ® encompasses the highest level of 

safety you can find on the market. All Elite products 

offer ISEA and CE Level 5 cut resistance and are built to 

withstand the most hazardous work environments. 

HexArmor Elite ® Products: 

Chrome Series ® Mechanic’s 

GGT5 ® 

EXT Rescue ® 

9000 Series 

NXT 

ThornArmor ® 

Needlestick-Resistant 

Heavy Duty 

Arm & Body Protection 

HexArmor Red ® offers up to Level 3 and 4 cut 

resistance. Red products are made with the care, 

focus, added features, and impeccable design 

you would expect only from HexArmor ® . 

HexArmor Red ® Products: 

Rig Lizard ® 

2000 Series 

Additional Product Collections: 

The Hex1 ® series is designed for general industrial 

applications. It’s purpose-built to protect you from 

common workplace hazards, without sacrificing 

comfort and dexterity. 

These industrial-grade work boot covers 

are designed to help you get your work done 

quickly and efficiently without making a mess. 

No matter what the working conditions, HexDri ® 

with H3O ® technology keeps water out while still 

allowing your hands to breathe and move.

Product Lineup 

Chrome Series ® Mechanic’s I Pages 16-19 

Chrome Series ® 4004 Chrome Series ® 4005 Mechanic’s+ 4018 Mechanic’s+ 4019 Chrome Series ® 4022 Chrome Series ® 360˚ 4023 

Chrome Series ® 4024 Chrome Series ® 360˚ 4025 Chrome Series ® 4026 Chrome Series ® 4027 Chrome Series ® SlipFit ® 4028 Chrome Oasis ® 4030 

Chrome Series ® Waterproof 4036 Chrome Series ® 4039 Chrome Core 4032 Chrome Core 4033 Chrome Core 4034 Chrome Core Oasis 4035 

GGT5 ® Series I Pages 20-21 

GGT5 ® 4010 GGT5 ® Gator Grip 4020X GGT5 ® Mud Grip 4021X GGT5 ® Arctic Gator ® 4031 

Rig Lizard ® I Pages 22-25 

Rig Lizard ® 2021 Rig Lizard Oasis ® 2022 Rig Lizard Arctic ® 2023 Rig Lizard ® 2024 Rig Lizard ® 2025 Rig Lizard ® 2028 

Rig Lizard ® Waterproof 2029 Rig Lizard ® 2031 Maple Rig 2032 Thin Lizzie 2090 

877.MYARMOR | hexarmor.com Product Lineup I Page 11


EXT Rescue ® I Pages 26-27 

EXT Rescue ® 4011 EXT Rescue ® 4012 EXT Rescue ® 4013 EXT Rescue ® Barrier 4014 

9000 Series I Pages 28-29 

9000 Series Liner 9009 9000 Series 9010 9000 Series 9011 9000 Series 9013 9000 Series 9015 9000 Series 9016 

2000 Series I Pages 30-33 

2000 Series 2080 2000 Series 2081 2000 Series FR 2082 2000 Series FR Liner 2083 2000 Series 2085 2000 Series 2086 

2000 Series 2087 2000 Series 2088 2000 Series 2089

Hex1 I Pages 34-37 

Hex1 ® 2120 Hex1 ® 2120-BLK Hex1 ® 2120-TAN Hex1 ® 2120-PNK Hex1 ® 2121 Hex1 ® 2121-CAM 

Hex1 ® Tack Grip 2122 Hex1 ® Arctic 2123 Hex1 ® Impact 2125 Hex1 ® Impact 2125-BLK Hex1 ® Ultimate Impact 2130 Hex1 ® Ultimate Impact 2133 

NXT I Pages 38-41 

NEW! ThornArmor ® I Pages 42-43 

NXT 10-302 NXT 10-306/10-307 

ThornArmor ® 3090 ThornArmor ® 3092 

Needlestick-Resistant I Pages 44-49 

SharpsMaster II ® 9014 SharpsMaster HV 7082 PointGuard ® X 6044 Hercules NSR 3041 NSR 4041 General Search & Duty 4045 

Leather Tactical 4046 

8” Arm Guard AG8TW 



Heavy Duty I Pages 50-53 

Hercules 400R6E SteelLeather Arctic 5032 SteelLeather ® III 5033 SteelLeather ® IX 5039 Bandit ® 5040 TenX Threesixty 7090 

BladeMaster ® Ultimate 8020 

Hotmill 8100/HWT8100 

Arm & Body Protection I Pages 54-59 

9” Arm Guard AG10009S 9” Arm Guard AG9V 9” Arm Guard AG9X 19” Arm Sleeve AS019S PentaArmor ® Sleeve 1010 20”x29” AP229 

24”x30” Apron AP102229 20”x22” Apron AP102222 36” Apron AP361 24”x30” Apron AP321/322 24”x38” Apron AP382 HexJacket HAJ01/HAJ02 

Leg Gaitors 9921 Chaps 9911/9915/9919 HexMat 9905/9907

NEW! YULEYS ® Clean Step System I Pages 60-61 

YULEYS ® 

NEW! Liquid/Chemical-Resistant I Pages 62-63 

Liquid/Chemical-Resistant 7200 

The Mudder 7300 The Mudder 7301 The Mudder 7302 

COMING SOON! HexDri ® I Pages 64-65 

HexDri ® 2180 HexDri ® 2182 


The Safest Mechanic’s Style Glove on the Market 

HexArmor ® Chrome Series ® gloves are built for a wide array of applications. Each product in the 

series was crafted to fit a hand with a specific purpose. With over 15 styles and various features 

such as impact protection, an abrasion-resistant knuckle patch, or a tacky nitrile palm, you can be 

certain that the Chrome Series ® will keep your hands protected in any hazardous condition.

Chrome Series ® 

Tactical 4004 

• SuperFabric ® brand material palm provides 

ISEA/CE Level 5 cut resistance (interior layer) 


Tactical 4005 



ISEA 

CUT: 5 

PENDING 

• Superior back-of-hand impact protection 

dissipates forceful blows over a large area 

• Impact protection on index finger does not 

extend to tip, providing a clean trigger finger 

ISEA 

CUT: 5 

PENDING 



• Impact protection on index finger does not 

extend to tip, providing a clean trigger finger 

• Synthetic leather palm 


• Elastic cuff with pull tab and Velcro ® closure 


Impact 

Protection 

• Neutral color scheme for increased 

concealment in covert situations 

Impact 

Protection 

• Dark color scheme for increased 


SuperFabric ® 

Protection Zone 

Available in sizes 7/S through 11/XXL 




Mechanic’s+ 

4018 



Mechanic’s+ 

4019 



• Cut and abrasion-resistant knuckle patch 


ISEA 

CUT: 5 

4522 


• Reflective tape on back-of-hand 


Available in sizes 5/XXS through 12/3XL 

ISEA 

CUT: 5 

4522 

• Back-of-thumb brow cloth 

• Synthetic leather palm with PVC print 

• Touchscreen-compatible conducive 

filaments in thumb and index fingertip 

• SlipFit ® cuff with nametag 

Available in sizes 6/XS through 12/3XL 






4022 




360˚ 4023 

• SuperFabric ® brand material provides 360˚ 




ISEA 

CUT: 5 

4521 


• Neoprene cuff with pull tab and Velcro ® closure 


ISEA 

CUT: 5 

4521 



Available in sizes 7/S through 12/3XL 

2 Layers 

SuperFabric ® Protection 





877.MYARMOR | hexarmor.com Chrome Series ® Mechanic’s I Page 17


4024 




360˚ 4025 



ISEA 

CUT: 5 

4532 



• Padded palm reduces vibration damage 

while returning a higher level of comfort 



ISEA 

CUT: 5 

4521 







Impact 

Impact 

Protection 

Protection 






4026 




4027 



ISEA 

CUT: 5 

4521 

Impact 



• Mud Grip synthetic leather 

palm with PVC dots 

• Hi-vis color and reflective tape on back-of-hand 



ISEA 

CUT: 5 

PENDING 

Impact 



• Durable TP-X ® palm with reinforced stitching 

• Hi-vis color and reflective tape on back-of-hand 



Protection 

Protection 






SlipFit ® 4028 



Chrome Oasis ® 

4030 





• Advanced HexVent ® technology allows 

for a breathable heat-release system 

ISEA 

CUT: 5 

4521 


• SlipFit ® cuff 


ISEA 

CUT: 5 

4521 






Impact 

Impact 

Protection 

Protection 




Protection Zone

ISEA 

CUT: 5 

4532 


Waterproof 4036 



• H2X ® liner creates a waterproof layer of 

defense against wet hazards: glove passes EN 

659:2003 for waterproof testing under method 

EN659:2003 + A1 2008 Clause 3.17 (ISO 15383) 



ISEA 

CUT: 5 

4511 


4039 





• Nitrile palm 

• SlipFit ® cuff with pull tab 

Available in sizes 6/XS through 11/XXL 


Impact 

Protection 





Impact 

Protection 



ISEA 

CUT: 5 

4521 

Chrome Core 

4032 




• Neoprene cuff with Velcro ® closure 


ISEA 

CUT: 5 

4521 

Chrome Core 

4033 










ISEA 

CUT: 5 

Chrome Core 

4034 




• Partial fingers on index, middle, and 

thumb for high dexterity applications 



ISEA 

4521 CUT: 5 4511 

Chrome Core Oasis 

4035 



• Advanced HexVent ® technology allows 

for a breathable heat-release system 








877.MYARMOR | hexarmor.com Chrome Series ® Mechanic’s I Page 19

Engineered to Provide Maximum Protection 

The GGT5 ® Series was built to be the toughest oil, gas, and mining glove on the market. 

With such a high level of safety hazards on these job sites, we made sure that the GGT5 ® 

Series was complete with ISEA Level 5 cut protection and an IR-X ® Impact Exoskeleton. 

Our specialized grips are designed to handle long days working with heavy tools, pipes, 

and machinery, to give workers the protection needed to get the job done.

“The hand protection is far superior to any other glove 

I have used. Anything coming into contact with the 

front of my hand was easily dampened by the padding, 

and that is a very big deal when nothing I work with 

weighs less than a couple hundred pounds.” 

-J.M., Precision Drilling 

ISEA 

CUT: 5 

PENDING 

GGT5 ® 

4010 



• Full Impact Exoskeleton with 

high-performance IR-X ® smash guards 

• Additional IR-X ® guard between 

thumb and index finger 


• SlipFit ® cuff with pull tab and nametag 

ISEA 

CUT: 5 

4542 

GGT5 ® Gator Grip 

4020X 

• SuperFabric ® brand material palm 

provides ISEA/CE Level 5 cut resistance 



• Gator Grip Technology ® prevents 

formation of oil film and displaces oil, 

allowing maximum contact with tools 


Impact 

Protection 



• Hi-vis color scheme 


Impact 

Protection 




GGT5 ® Mud Grip 

4021X 



ISEA 

CUT: 5 



• Mud Grip synthetic leather palm 

4544 

with PVC dots works well with light/ 

medium oil-based muds 

• Durable TP-X ® palm patches 


ISEA 

CUT: 5 4543 

Impact 

Protection 




Impact 

Protection 



GGT5 ® Arctic 

Gator ® 4031 





• H2X ® and C40 Thinsulate interior 

liners keep hands warm and dry 




877.MYARMOR | hexarmor.com GGT5 ® Series I Page 21

The Perfect Combination of Comfort and Safety 

The Rig Lizard ® Series is purpose-built to provide maximum grip in tough situations – with five 

grip options for water, oils, muds, and lubricants. Each glove is also equipped with our highly 

flexible IR-X ® Impact Exoskeleton, keeping hands protected from smash and pinch injuries. 

This combination of multiple technologies and features makes the Rig Lizard ® the ideal solution 

for common oil, gas, and mining hazards. And with options for cold and warm weather protection, 

your hands can stay safe and comfortable in any environment.

ISEA 

CUT: 3 

4243 

Rig Lizard ® 

2021 

• IR-X ® Impact Exoskeleton with 

high-flex design protects against 

forceful blows to the back of hand 





ISEA 

CUT: 3 

4243 

Rig Lizard 

Oasis ® 2022 

• Advanced HexVent ® nylon allows for 

a breathable heat-release system 









Impact Protection 



TP-X ® Technology 


Rig Lizard 

Arctic ® 2023 




Rig Lizard ® 

2024 




ISEA 

CUT: 3 

4244 





ISEA 

CUT: 3 

3244 



• Cotton palm with polyurethane backing 

provides superior grip in saturated situations 









High-Performance 

Protective Material 

Rig Lizard ® 

2025 

• SuperFabric ® brand material palm 

provides ISEA Level 4/CE Level 5 

cut resistance (interior layer) 

Rig Lizard ® 

2028 




ISEA 

CUT: 4 

4544 






• Durable TP-X+ palm with reinforced stitching 


ISEA 

CUT: 2 

4244 



• Mud Grip synthetic leather palm with 

PVC dots and reinforced stitching 






TP-X+ Technology 



877.MYARMOR | hexarmor.com Rig Lizard ® I Page 23

ISEA 

CUT: 3 

PENDING 

Rig Lizard ® 

Waterproof 2029 

• H2X ® liner creates a waterproof layer 

of defense against wet hazards 








ISEA 

CUT: 3 

4243 

Rig Lizard ® 

2031 














Maple Rig 

2032 


maple leaf design protects against 


Thin Lizzie 

2090 




ISEA 

CUT: 3 

4243 






ISEA 

CUT: 4 

PENDING 

• High-performance polyethylene 

and glass fiber blend shell provides 

exceptional dexterity and feel 

• Sandy nitrile palm dip 

Available in sizes 7/S through 10/XL 




CPPT Gram Cut Score 1576 G 

Performance gram force may vary 10%: lab-to-lab scores also vary

METAL | OIL | LUMBER | EXTRICATION | STEEL 

The Rig Lizard ® started with the belief 

that PPE should protect your hands 

from specific workplace hazards 

without limiting the dexterity of your 

most valuable tool. Our team hit the 

drawing board with safety advisors 

from across the industry, and the 

result is an outstanding lineup of 

purpose-built, high-level PPE.

You Do the Job that No One Else Can Do 

When we took on the mission of creating the world’s safest rescue glove, we knew 

we couldn’t do it alone. Building the perfect safety glove for the toughest first 

responders takes a lot of work, so we put it back on the hardest workers we know. 

We went out and asked the heroes in the field what they needed out of their rescue 

gloves. It’s a good thing we did; they helped us create a line of products that we are 

proud to call the HexArmor ® EXT Rescue ® Series.

“We have used them in auto-ex training, auto-ex real life, 

rope drills, and gas powered tool use, including chainsaws. 

The gloves offer great dexterity and protection, allowing 

for the user to focus on the task at hand.... I would 

recommend these gloves to any of our personnel.” 

- R. Gutierrez, Newport Beach, CA 

EXT Rescue ® 

4011 



EXT Rescue ® 

4012 



ISEA 

CUT: 5 

4533 

TP-X ® Patches 

4544 

• Durable TP-X ® palm reinforcements 




ISEA 

CUT: 5 

4521 





• Airprene cuff with pull tab and Velcro ® closure 




Impact 

Impact 

Protection 

Protection 





EXT Rescue ® 

4013 



EXT Rescue ® 

Barrier 4014 



ISEA 

CUT: 5 

4521 


4532 

• Durable TP-X ® palm and fingertip reinforcements 



• SlipFit ® and anti-debris cuff 


ISEA 

CUT: 5 

4542 

• Waterproof H2X ® barrier meets ASTM F1670/ 

F1671 for bloodborne pathogen resistance 

and fluid-borne viral resistance (interior liner) 






Impact 

Protection 

Impact 

Protection 






877.MYARMOR | hexarmor.com EXT Rescue ® I Page 27

9000 Series 

The Perfect Union of Performance and Comfort 

The versatile 9000 Series offers a line of palm-coated knit gloves, supplemented with ISEA 

Level 5 cut-resistant SuperFabric ® , and purpose-built for a variety of industrial applications. 

Most of the 9000 Series gloves feature a unique palm dip, maintaining the highest grip in 

varying conditions while providing increased abrasion resistance to extend product life.

9000 Series 

Liner 9009 



9000 Series 

9010 



ISEA 

CUT: 4 

ISEA 

CUT: 5 

4541 




• Recommended as an underglove solution 

ISEA 

CUT: 4 

ISEA 

CUT: 5 

4544 




• Flat nitrile palm dip 



HPPE Blend Shell 






9000 Series 

9011 



9000 Series 

9013 



ISEA 

CUT: 5 

4544 

• Cotton blend shell provides 


• Wrinkle rubber palm dip 


ISEA 

CUT: 4 

ISEA 

CUT: 5 

4543 




• Sandy nitrile palm dip 







9000 Series 

9015 



9000 Series 

9016 



ISEA 

CUT: 4 

ISEA 

CUT: 5 

4543 






ISEA 

CUT: 4 

ISEA 

CUT: 5 

4543 




• Foam nitrile palm dip 








877.MYARMOR | hexarmor.com 9000 Series I Page 29

2000 Series 

Dexterity, Durability, and Purpose-Built Grip 

No matter what the job, there’s a 2000 Series glove for your needs. Each glove in the 2000 

Series is made with high-quality fibers, providing a high-dexterity, extremely comfortable 

shell that can be worn all day without causing hand fatigue. This lighty-duty line of knit 

gloves offers a variety of palm dips that can be used for wet, oily, and dry situations, and 

provides additional abrasion resistance.

ISEA 

CUT: 4 4542 

2000 Series 

2080 

• 13-gauge Kevlar ® and steel 

blend shell provides exceptional 

dexterity and feel 



ISEA 

CUT: 4 

4532 

2000 Series 

2081 

• 13-gauge Kevlar ® and steel 

blend shell provides exceptional 

dexterity and feel 

• Wrinkle rubber three-quarter dip 



Performance gram force may vary 10%: 

lab-to-lab scores also vary 




ISEA 

CUT: 3 

3543 412210 




2000 Series 

Flame-Resistant 

2082 

• Flame-resistant 13-gauge Kevlar ® 

and wool blend shell provides 


• FR-compliant palm dip 

• Hazard risk category HRC 1 arc flash 

protection (ATPV 7.7 cal/cm2, as per 

ASTM F2675/F2675M-13, determining arc 

flash rating of hand-protective devices) 


ISEA 

CUT: 3 

X442 




Tested in accordance with the following EN407 clauses: 

I) 5.1 = Level 4 

II) 5.2 = Level 1 

III) 5.3 = Level 3 

IV) 5.4 = Level 1 

2000 Series 

Flame-Resistant 

Liner 2083 

• Flame-resistant 13-gauge Kevlar ® 

and wool blend shell provides 


• Recommended as a flame-resistant underglove 

• Hazard risk category HRC 1 arc flash 

protection (ATPV 7.7 cal/cm2, as per 

ASTM F2675/F2675M-13, determining arc 

flash rating of hand-protective devices) 


2000 Series 

2085 




2000 Series 

2086 




• Polyurethane palm dip 


ISEA 

CUT: 4 

PENDING 


ISEA 

CUT: 4 3543 








877.MYARMOR | hexarmor.com 2000 Series ® I Page 31

ISEA 

CUT: 4 

PENDING 

2000 Series 

2087 






ISEA 

CUT: 4 

PENDING 

2000 Series 

2088 




• Foam nitrile three-quarter dip 








ISEA 

CUT: 4 

PENDING 

2000 Series 

2089 





• Hi-vis color scheme 




lab-to-lab scores also vary


Each product in the 2000 Series is 

constructed of various fiber blends 

and unique palm coatings. Glove 

structures are durable, flexible, and 

cut resistant, offering both dexterity 

and safety. Varying palm dips 

increase abrasion resistance, extend 

product life, and provide the highest 

grip for a variety of applications.

Better Fit. Better Materials. Better Design...Better Gloves 

From the leader in industrial hand protection comes the Hex1 ® Series, because we know that not all jobs 

require heavy-duty safety gloves. Sometimes you just need a pair of gloves that look great, feel great, work 

great and last. Hex1 gloves are made with the same high-quality materials as our high-performance safety 

gloves and perform better than any mechanic’s glove you’ve ever worn. Whether you’re looking for impact 

protection, wet or dry grip, cold weather or simply a shop-glove, you’re sure to find a Hex1 to fit your needs.

Hex1 ® 

2120 


Hex1 ® 

2120-BLK 


• Reinforced index finger and thumb saddle 


• Synthetic leather palm with silicone print 


3131 


• Nametag on palm side of cuff 


PENDING 






Available online only at SafetyGloves.com 

Hex1 ® 

2120-TAN 


Hex1 ® Women’s 

2120-PNK 




PENDING 

• Neutral color scheme for increased 






PENDING 




Available in women’s sizes 7/S through 10/XL 


Hex1 ® 

2121 


Hex1 ® 

2121-CAM 




3131 





PENDING 

• Camo color scheme for increased 






877.MYARMOR | hexarmor.com Hex1 ® I Page 35

Hex1 ® Tack Grip 

2122 


Hex1 ® Arctic 

2123 


4131 


• Full silicone printed palm over 

synthetic leather for superior grip 




3222 




• Digital polyurethane palm with rubber print 




Hex1 ® Impact 

2125 

• Light back-of-hand impact protection 

against bumps and tool slips 

Hex1 ® Impact 

2125-BLK 

• Light back-of-hand impact protection 






PENDING 

• Lightly padded goatskin leather 

palm with reinforced stitching 

PENDING 

• Lightly padded goatskin leather 

palm with reinforced stitching 











PENDING 

Hex1 ® Ultimate 

Impact 2130 

• Full back-of-hand impact protection 







PENDING 

Hex1 ® Ultimate 

Impact 2133 

• Full back-of-hand impact protection 



• Synthetic leather palm with silicone dots 





Impact Protection


The Hex1 ® Series was 

designed for general 

industrial applications and 

purpose-built to protect you 

from common workplace 

hazards without sacrificing 

comfort and dexterity.

A Revolution in Hand Protection Technology 

HexArmor ® set out with the mission of protecting workers from the constant threat of cut injuries 

while maintaining the dexterity and comfort that is required to perform everyday tasks. Our team 

was able to develop, through extensive trialing and testing, the revolutionary TruShield ® technology. 

Our proprietary Coretek ® blend of fibers creates a high-performance glove structure that is 

specially designed to house our SuperFabric ® guard plates, creating an ASTM Level 5 cut-resistant 

shield on the exterior of the hand while preserving all the dexterity of an ordinary knit glove.

High-Performance TruShield ® Technology 

NXT products are made with a combination of 

SuperFabric ® brand materials and our own proprietary 

blend of Coretek ® performance fibers. The bonding of 

these fabrics reduces the ability of fibers to “window,” 

or separate, preventing cut and puncture hazards from 

reaching the user’s Cut/Puncture hand. Hazard 

Fiber Windowing 

• Exceptional performance in real-world application 

testing: NXT 

Cut 

doesn’t 

Injury 

have the weaknesses 

of standard fiber-knit products, which provide 

less protection from cuts and punctures when 

immobilized, under tension, or coated. 

• Provides significantly 

Fabric Shell 

higher abrasion resistance than 

standard fiber-knit products, Hand which means higher 

performance longer in the product’s life. 

Standard Knit Gloves 

Cut/Puncture Hazard 

SuperFabric ® Armor Plates 

Coretek ® Shell 

Hand 

Gloves with 

Protection 

ISEA 

CUT: 5 

ISEA 

CUT: 1 

NXT Food 

Service 10-302 

• Coretek ® fiber keeps hands 

cool and comfortable 

• Designed to be worn under standard 

nitrile, latex, or vinyl glove 

• 3-finger coverage targets primary 

area for knife strikes 

• Meets European food migration testing 

(EN 1186:2002 SI 1998 No 1376) 

ISEA ISEA 

414X CUT: 1 CUT: 5 4543 

NXT 

10-306/10-307 

• Coretek ® fiber keeps hands 

cool and comfortable 

• Designed to be worn under standard 

nitrile, latex, or vinyl glove 

• 10-306 sold in pairs, 10-307 sold in eaches 


• Sanitizeable 

Coretek ® 

Performance Fiber 



• Ambidextrous, sold in eaches 

Available in sizes 5/XXS through 12/3XL 

Coretek ® 

Performance Fiber 



877.MYARMOR | hexarmor.com NXT Series I Page 39

Reducing Hand Injuries in National Grocery Chains 

HexArmor ® Introduces NXT 

10-302 as a Solution to Cut 

Injuries and Compliance 

Employees in the deli and produce departments at 

a large national grocery chain were using standard 

Spectra ® cut gloves to handle knives and change 

cutting blades on machinery. The gloves provided 

some levels of cut protection, but the fiber-based 

gloves were bulky, ill-fitting, and scratchy, which caused 

problems with getting employees to actually wear 

the PPE. The safety team was tasked with finding 

gloves that would offer a higher level of cut protection, 

were more comfortable, and had higher dexterity in 

hopes of increased employee-wear compliance. 

HexArmor ® was brought in to learn more about 

the issues at the store level and took surveys 

of actual end-users. The following issues 

were found with the Spectra ® gloves: 

• Too bulky and ill-fitting 

• Loose fingertips bunch up and get caught in 

machinery or get in the way of cutting 

• Did not sanitize or wash well: easily 

discolored, retain odor 

• Did not protect from accidental knife slips because 

the knife tip could penetrate between the fibers 

The results from the survey helped guide the 

recommendation to implement a large trial of the 

NXT 10-302 in the deli and produce departments. 

Gloves were used in various food preparation and 

machine maintenance applications, and the stores saw 

an immediate acceptance of the NXT 10-302 as a highly 

comfortable solution that provided better protection 

than the Spectra ® gloves. While using the NXT 10-302, 

all of the testing sites saw an increase in compliance, 

as well as longer usage and improved cut injury data. 

44% Reduction in Cut Injuries 

While Using Knives and Machines 

Data taken from 150 stores 

over a period of one year 

was aggregated to show 

the effect of the HexArmor ® 

NXT 10-302 on the safety 

records of the unit. The NXT 

10-302 not only reduced 

cut injuries by 44% after 

the first year of use, but 

safety managers noticed 

an increase in compliance as the NXT 10-302 was said 

to be much more comfortable, flexible, and dexterous. 

Further trending shows injury rates will continue to 

drop as more and more stores adopt the NXT 10-302. 

The grocery chain we worked with has purchased more 

than 75,000 units over the first year of implementation. 

HexArmor ® was able to impact the safety program at 

this large grocery chain because of the following: 

• Higher cut resistance: exceeds ISEA and CE Level 5 

• Protection from knife slips and pointed kitchen 

hazards provided by SuperFabric ® guardplates 

• High dexterity and comfort in a 

13-gauge lightweight shell 

• Washes better than the competition 

and is easily sanitized

FOOD SERVICE | PROCESSING | INDUSTRIAL 

“I like these gloves (NXT 10-302) 

better than the old ones (Spectra). 

I feel safer and don’t have to worry 

about the extra material in the 

fingers getting caught in the slicer.” 

- Deli Department Employee

Stop Needles and Thorns 

For serious gardeners, hobbyists and professional landscapers, ThornArmor ® gives 

workers the ability to pick up and move cactus and thorny bushes by hand without 

having to worry about harmful pokes. Three layers of SuperFabric ® technology 

are built into ThornArmor ® gloves, creating a highly puncture-resistant palm lining 

that acts as a barrier between your hands and sharp thorns and needles.

NEW! 

Your Ultimate Defense Against Needles and Thorns 

Introducing the first heavy-duty cactus landscaping 

gloves: the ThornArmor ® 3090 and the ThornArmor ® 

3092. Brought to you by the industry leader in 

needlestick protection, the ThornArmor ® series by 

HexArmor ® uses innovative technology to defend 

against needles and thorns. Say goodbye to the days 

of wrapping up cactus with carpet and newspaper 

or using rope to move these plants around. 

Three layers of SuperFabric ® 

technology create a highly 

puncture-resistant barrier 

between your hands and 

sharp thorns and needles. 

For professional landscaping contractors, ThornArmor ® 

gives workers the ability to pick up and move cactus 

by hand, without having to worry about harmful pokes. 

And for the serious DIY gardener, these are the same 

professional-grade tools the best horticulturists use. 

ISEA 

CUT: 5 

PENDING 

ThornArmor ® 

3090 

• Three layers of SuperFabric ® brand 

material in the palm (interior layer) 

• Particle nitrile coating provides 

a liquid-resistant barrier while 

providing enhanced grip 

• Extended canvas cuff 

ISEA 

CUT: 5 

PENDING 

ThornArmor ® 

3092 

• Three layers of SuperFabric ® brand 

material in the palm and partial 

index finger wrap (interior layer) 

• Breathable HexVent ® panel on the 

back-of-hand helps keep you cool 

• Synthetic palm material 


• Airprene cuff with Velcro ® closure 

• Reinforced fingertips 

Available in sizes 5/XXS through 11/XXL 

Protective Shell 

3 Layers 


3 Layers 


877.MYARMOR | hexarmor.com ThornArmor ® I Page 43

The Only Proven Needlestick Solution 

The methods by which needlestick-resistant products are tested in a laboratory often fall short of the actual 

dangers involved with handling used needles on the job. The few standards that are available for puncture 

testing, such as the EN388 and the ASTM 1342, do not accurately replicate the fine points of 25-gauge medical 

needles, nor do they account for odd angles of entry. In order to validate HexArmor ® gloves as the most 

needlestick-resistant PPE available, HexArmor ® researchers adapted available testing methods to account for the 

material’s superior level of performance. Learn more about new and existing needlestick tests on pages 48-49.

2 Layers 


3 Layers 


Hercules NSR 

3041 

• SuperFabric ® brand material provides 

industry-leading needlestick resistance 

(in noted enhanced areas) 

• Full coverage design and pre-curved shape 

for maximum comfort and protection 

• Silicone dot palm grip 


ISEA 

ISEA 

CUT: 5 4522 

CUT: 5 4522 

3 Layers 


NSR 

4041 




• Back-of-hand knuckle padding for 

incidental bumps/impact 

• Comfortable memory span liner 

• Silicone dot palm grip 



Search & 

Duty 4045 




Leather Tactical 

Enforcement 4046 




ISEA 

CUT: 5 

4532 

• AirMesh breathable back-of-hand 



ISEA 

CUT: 3 

ISEA 

CUT: 5 

4512 

• Kevlar ® liner for back-of-hand protection 

• Premium goatskin leather 

• Slipfit ® cuff 


Protective Liner 

2 Layers 




2 Layers 




PointGuard ® X 

6044 




Sharpsmaster HV 

7082 




ISEA 

CUT: 5 

4523 

• Recommended use as an underglove solution 

with appropriate top-glove combination 

• Lightweight spandex shell with elastic wrist 

Available in sizes 5/XXS through 11/XXL 

ISEA 

CUT: 5 

4533 

• Single-glove needle solution with 

incredible dexterity and comfort 

• Flat nitrile three-quarter knuckle dip 


3 Layers 


3 Layers 


877.MYARMOR | hexarmor.com Needlestick Resistant I Page 45

Sharpsmaster II ® 

9014 




• Cotton blend shell provides 


• Wrinkle rubber palm dip with 

Actifresh antimicrobial treatment 


ISEA 

ISEA 

CUT: 5 4544 

CUT: 5 4512 

8” Needle-Resistant 

Arm Guard AG8TW 



• Won’t fall down like knit sleeves 

• Spandex wrist insert with thumb 

hole and snap fasteners 


3 Layers 


2 Layers 


Don’t Get Stuck with Faulty Hand Protection 

The precise cost of needlestick injuries is difficult 

to quantify. According to the American Hospital 

Association, one case of serious infection by blood-borne 

pathogens can add up to $1 million or more in expenses 

for testing, lost work time, and disability payments. 

Even when no infection occurs, the cost to organizations 

is estimated to be more than $3,000 per injury for testing, 

counseling, and time off work. 

HexArmor ® sets the industry standard for needle 

protection with solutions for a variety of applications. 

Our needlestick-resistant products do more than simply 

pass industry-accepted testing methods; we put them 

through real-world applications countless times, with a 

history of undeniable success. The accepted standards of 

testing do not account for the many variables employees 

face on the jobsite, so we created our own tests, mirroring 

the conditions and hazards that our users face. 

HexArmor ® needlestick-resistant products work by 

layering SuperFabric ® materials over each other. 

Our needlestick products are tested in countless 

real-world applications, making them the mostproven 

needlestick solution available on the market.

WASTE | RECYCLING | LAW | MUNICIPALITIES 

“The best hand protection 

on the market.” 

– Regional Safety Manager, 

Large U.S. Waste Handler/Recycler

Puncture and Needle Testing Clarified 

The New ASTM F2878 Test 

For years the EN388 and ASTM 1342 were the main 

tests used for measuring puncture resistance for 

PPE. The shortcoming of the EN388 and ASTM 

1342 tests is that they do not replicate realworld 

puncture hazards such as needles, slivers, 

burrs, frayed wire, wire rope, or glass shards. 

Is the Truth in the Test? 

The reason that these tests are not relevant for 

puncture is simple. The test probe for the EN388 

test is rounded and blunt, larger than the end of a 

ballpoint pen. The test measures more of a tear, or 

burst hazard, but has almost no relevance when 

it comes to needle or industrial testing. The test 

probe for the ASTM 1342 is thinner and more 

pointed than the E388 probe, but it still does not 

come close to replicating a needlestick hazard. 

From left to right: EN388 Probe, ASTM 1342 Probe, 25G 

needle, ballpoint pen 

According to a March 11, 2011, ASTM Newsroom 

Press Release (#8815), this is an issue that the 

standards committees and other manufacturers 

recognized: Due to risk of infection from bloodborne 

pathogens such as human immunodeficiency 

virus and hepatitis C, hypodermic needles pose 

a life-safety risk to healthcare professionals, law 

enforcement officials, sanitation workers, and others. 

A new ASTM International standard addresses the 

unique mechanics of hypodermic needle puncture 

as related to protective clothing. ASTM F2878, Test 

Method for Protective Clothing Material Resistance 

to Hypodermic Needle Puncture, was developed 

by Subcommittee F23.20. Subcommittee F23.20 

focuses on Physical properties and testing, and 

is part of the ASTM International Committee F23 

on Personal Protective Clothing and Equipment. 

“Over the past several years, a number of new 

protective equipment technologies have been 

developed to prevent needlestick injuries; however, 

there has been no standardized test method 

available for technology developers and users to 

reference when conducting comparative analysis,” 

says John Cronin, product manager, Warwick Mills 

Inc., and an F23 member. “With the publication 

of ASTM F2878, there is now an appropriate 

method for conducting comparative analysis 

of hypodermic needle puncture resistance.” 

HexArmor ® and New ASTM 

F2878 Testing 

HexArmor ® has long understood the shortcomings of 

puncture tests and has been testing using a modified 

ASTM 1342 test with 25-gauge hypodermic needles. 

With the new ASTM F2878 test, we are now able to 

standardize testing based on international standards.

Overview of the ASTM F2878 Test 

• Testing can be done using a 21G, 25G, or 28G needle 

• The following tests used a 25G needle 

• Puncture probe (25G needle) travels at a 90˚ angle 

into a specimen at a velocity of 500mm/min 

• Amount of force necessary to puncture 

through the material specimen is recorded 

in newtons* to the nearest .01 N 

• This test is done 12 times for every specimen 

• The average of the 12 results is reported 

The Results 

We tested our needlestick and puncture-resistant 

gloves, as well as competitive gloves, using the ASTM 

F2878 methodology, producing the following results: 

Our needlestick–resistant gloves and arm 

guards aren’t just lab tested, we test them 

with actual 25-gauge needles to give you 

maximum protection and peace of mind. 

ASTM-F2878 Needle Resistance Comparison 

300 

3.0 

Grams of Needle Resistance 

250 

200 

150 

100 

50 

2.0 

1.0 

Newtons 

0 

0 

10G Kevlar ® 

(non-coated) 

Interlock 

Cotton 

Wrinkle 

Rubber Kevlar ® 

1.4mm Split 

Cow Leather 

Turtleskin 

Insider 

PicGuard HexArmor ® 

7082 

HexArmor ® 

9014 

*The newton is the Standard International unit of force. One newton is the force required to cause a mass of one kilogram to accelerate 

at a rate of one meter per second squared in the absence of other force-producing effects. We have converted newtons to grams. 

877.MYARMOR | hexarmor.com Needlestick Testing I Page 49

Heavy Duty 

The Toughest, Most Durable Gloves on the Market 

Some job sites require more protection – they demand the strongest, toughest, and most resilient 

safety gloves. HexArmor ® has spent many years on sites like this – it’s how we created the heavyduty 

line of products. Built to handle the most extreme occupational hazards, HexArmor ® heavyduty 

gloves are built from the inside out, with proprietary SuperFabric ® brand materials, giving each 

glove Level 5 cut resistance and industrial puncture resistance. We put everything we have into 

building our heavy-duty line of safety gloves, and the result is purpose-built PPE you can trust.

SteelLeather ® III 5033 

Saves a Worker’s Finger 

While replacing a steam valve in a manufacturing site, a maintenance worker 

was exposed to a nail on a wooden crate. The worker accidentally grabbed the 

crate where the nail was protruding. The nail punctured through the leather 

on the middle finger but was stopped by the protective liner in the HexArmor ® 

SteelLeather ® 5033 glove. The nail ripped the leather shell but did not puncture 

the protective layer of SuperFabric ® material. HexArmor ® saved the worker from 

serious injury, allowing the worker to continue the workday. 

ISEA 

CUT: 5 

4533 



Hercules 

400R6E 


360˚ ISEA/CE Level 5 cut resistance 

• Industrial puncture protection on 

enhanced areas protects against 

wires, metal, wood, and glass 

• Gauntlet design and pre-curved shape for 

maximum comfort and ultimate protection 

• Silicone palm grip 

• Extended gauntlet style cuff 

Available in sizes 8/M through 11/XXL 

ISEA 

CUT: 5 

PENDING 



SteelLeather 

Arctic 5032 







• C40 Thinsulate interior liner for cold resistance 

• Premium cow grain leather 



SteelLeather ® III 

5033 







• Premium cow grain leather 



ISEA 

ISEA 

CUT: 5 4532 

CUT: 5 4544 

SteelLeather ® IX 

5039 

• SuperFabric ® brand material 

provides 360˚ ISEA and CE Level 5 

cut resistance (interior layer) 




• Premium split cow leather 

• Canvas safety cuff 






877.MYARMOR | hexarmor.com Heavy Duty I Page 51

Bandit ® 

5040 



TenX Threesixty 

7090 



ISEA 

CUT: 5 

4544 

• Premium cowhide leather 

• Critical seams reinforced along thumb 

and bottom edge for extra protection 



ISEA 

CUT: 5 

4544 




• Updated construction with increased 

dexterity, better fit and feel 

• Particle nitrile coating for liquid resistance 








BladeMaster ® 

Ultimate 8020 



HeatArmor ® 

8100/HWT8100 






• 7G Kevlar ® knit shell 


• Leather palm with reinforced stitching 


ISEA 

CUT: 5 

ISEA 105 

PENDING 

• Rates CE Level 2 for contact heat, up to 250°C 

• Level 5 ISEA 105 in accordance with 

ASTM 1776, 320˚C (HWT8100) 

• 13 oz. cotton shell, burlap lining (HWT8100) 

• Extended canvas safety cuff 

Available in sizes 8/M through 10/XL 





Protection Zone


Bring on the heat, bring on your 

toughest hazards. Our HeatArmor ® 

8100/HWT8100 is the hottest 

innovation in cut-resistant 

hotmill hand protection. Gloves 

provide full-coverage ISEA and 

CE Level 5 cut resistance, without 

sacrificing comfort or dexterity.


Armor Up! 

No more snags, punctures, abrasions, or cuts to your arms and torso. 

HexArmor ® industrial aprons and body protection outperform, outlast, 

and fit better than the competition. HexArmor ® body protection 

exceeds the industry’s highest testing standards – ISEA Level 5 – 

giving you the protection you need most, where you need it. 

Made in USA

“We’ve been using HexArmor ® arm guards for almost three 

years without an injury. Recently, a HexArmor ® rep came 

through the plant. He asked how long they were lasting until 

we had to replace them, and we told him, ‘We haven’t yet!’” 

- Frank M., Safety Manager, Major Steel Plant 

9” Arm Guard 

AG10009S 


ISEA/CE Level 5 cut resistance 


AG9V 


ISEA Level 5 cut resistance 

ISEA 

CUT: 5 

4532 




• Spandex wrist insert with thumb hole 

ISEA 

CUT: 5 




• Spandex wrist insert with thumb hole 


• Adjustable Velcro ® closure design 







AG9X 



19” Arm Sleeve 

AS019S 



ISEA 

CUT: 5 




• Extended cuff with Neoprene thumb 

loop and Velcro ® closure 

ISEA 

CUT: 5 

4532 




• Neoprene thumb loop and sleeve 

clip keeps sleeve from falling 







877.MYARMOR | hexarmor.com Arm & Body Protection I Page 55

ISEA 

CUT: 5 

4521 

PentaArmor ® 

1010 



• Elastic thumb loop and sleeve clip 

keeps sleeve from falling 

• Hi-vis color scheme for visibility 


PentaArmor ® 1010 vs. 

Standard Competitive Sleeves 

Dyneema ® 

Kevlar ® PentaArmor 

Composite 

® 

Cut Level 600 Grams 800 Grams 4200 Grams 

Number of employees 100 100 100 

Cost per sleeve $3.50 $9.75 $32.99 

Lifespan in weeks 1.5 3.5 26 

Monthly cost/employee $20.22 $24.14 $11.00 

Annual cost/employee $242.67 $289.71 $131.96 



Total annual cost $24,266.67 $28,971.43 $13,196.00 

Tested Using the Industry’s Highest Standards 

grams 

4500 

4000 

3500 

3000 

2500 

2000 

1500 

1000 

500 

0 

leather 

kevlar ® 

dyneema ® 

HexArmor body protection 

body protection product 

Test: ASTM 1790-97 

Many arm and body protection products on the market 

will rate around a Level 1-2 on the ASTM F-1790 test 

(around 400 grams), which won’t protect workers from 

sharp edges, burrs on sheet metal, or metal castings. 

The limitations of leather, Kevlar ® , and Dyneema ® are 

that they offer little cut or puncture resistance. They may 

receive a “cut rating” on the industry standard but will fail 

in the field when exposed to normal work. 

Be aware of the differences between the two tests to 

measure the cut resistance and protective qualities of 

materials. At HexArmor ® , we favor ANSI/ISEA 105-2011 

testing methods when evaluating PPE. Our competitors 

often use CE ratings to boost the perception of cut 

resistance with data that just doesn’t match up with tough 

ANSI/ISEA ratings. Our method of testing, the stringent 

ASTM 1790-97, applies a more difficult method that 

makes it harder to achieve higher ratings. By putting our 

PPE against the most rigorous testing available in the 

industry today, we are able to design and engineer 

better-performing products with a greater level of 

protection, for you and your body.

ARMOR UP! | ARMOR UP! | ARMOR UP! 

It’s now possible to increase 

arm safety by 800% and reduce 

costs by 50% with a product 

that is lightweight, breathable, 

and comfortable to wear.

HexArmor ® body protection exceeds the industry’s 

highest testing standards – ISEA Level 5 – giving you 

the protection you need most, where you need it. 

No other competitive product comes close. 

20” x 30” Apron 

AP229 



20” x 29” Apron 

AP102229 



ISEA 

CUT: 5 

4532 




• Medium weight (single layer) 

ISEA 

CUT: 5 

4534 




• Heavy duty (double layer) 

One size fits most 



2 Layers 



24” x 30” Apron 

AP321/322 



20” x 22” Apron 

AP102222 



ISEA 

CUT: 5 

AP322 

4534 




• Medium weight (single layer, AP321) 

ISEA 

CUT: 5 





• Heavy weight (double layer, AP322) 




2 Layers 


SuperFabric ® Protection

36” Apron 

AP361 





ISEA 


ISEA 

CUT: 5 4532 CUT: 5 4534 

• Double layer belly patch 

• Split leg design 


24”x 38” Apron 

AP382 








2 Layers 




2 Layers 


HexJacket 

HAJ01/HAJ02 



Leg Gaitors 

9921 



ISEA 

CUT: 5 




• Heavy duty double layer (HAJ02) 

ISEA 

CUT: 5 




• Front-to-back leg coverage 

• Also available in hi-vis 

• Reflective strip for visibility 


• Additional layer options available upon request 

Visit HexArmor.com for sizing instructions 






Chaps 

9911/9915/9919 



HexMat 

9905/9907 



9911/9915 9919 

ISEA 

CUT: 5 4532 4534 




• Front-to-back leg coverage 

ISEA 

CUT: 5 

• Ideal solution for working with rough 

surfaces and shattered/broken hazards 

• Pliable material fits anywhere 

you need protection 

• Three layers of protection on 

knee (front only, 9911) 

Available in sizes 20”x 45” (9905), 50”x 30” (9907) 

• Reflective strip for visibility 

Available in sizes 9/L through 12/3XL 



877.MYARMOR | hexarmor.com Arm & Body Protection I Page 59

Patent Pending 

Give Disposable Booties the Boot 

Say goodbye to dirt and grime and say hello to YULEYS ® from HexArmor, the reusable, 

slip-on boot cover that’s helping even the dirtiest jobs clean up their act. The typical 

disposable booties are slippery and expensive, and after spending one day on the 

job, they spend a lifetime in a landfill. YULEYS can be easily slipped into and used 

thousands of times, while providing greater traction and protecting floors and walls.

NEW! 

Industrial-Strength Footwear for Any Industry 

Fast. Cost Effective. Clean. 

These industrial-grade work boot covers are a perfect fit 

for in-home service workers, industrial workers entering 

sanitary work areas, food prep and agriculture, and people 

working in clean rooms and sterile environments. Save 

yourself the time of taking off your boots, or the cost 

and inconvenience of going through boxes of disposable 

booties, and take a step in the right direction. 

Save money by replacing disposable booties with 

YULEYS reusable work boot covers. On average, 

a box of disposable booties costs $10 for 100 

pairs. If 1 worker enters a residence on average of 

7 times a day, that would be $.70 per day; multiply 

that by 5 days a week, and you’ve got $3.50 per 

week. Multiply that by 48 working weeks a year, 

and your grand total is $168/year per worker. 

Leaner. Cleaner. Greener. 

Millions of booties are disposed of every 

day. YULEYS ® work as hard as the people 

who wear them, and are built for heavy use. 

If they ever need to be replaced, they can be 

easily recycled and given another life. 

YULEYS ® 

Clean Step System 

• Hands-free on-and-off 

• Heel-lock system 

• Flexible design 

• Anti-slip tread 

• Specifically designed for steel-toed boots 

• Recyclable, reduces effects on landfills 

Visit YULEYS.com for sizing 

877.366.5436 | yuleys.com YULEYS ® I Page 61

Stay Safe and Stay Dry 

If you’re working with oils, muds, and other liquids all day long, you know how 

uncomfortable it can be to wear saturated gloves. Not only is it unpleasant, but some 

substances can cause skin irritation or allergic reactions. The HexArmor ® liquid/ 

chemical resistant series was developed to keep oils, muds, and other liquids out of the 

glove and away from your hand, all day long, so you can work safe while staying dry.

NEW! 

ISEA 

CUT: 4 

4542 AKL 

Liquid/Chemical- 

Resistant 7200 

• EN374 certified for chemical resistance 

against methanol, sodium hydroxide 

40%, and sulfuric acid 96% 

• Full-coverage design provides 360˚ cut 

resistance (CE Level 5, ISEA Level 4) 

• Textured PVC dip 

• Extended gauntlet-style cuff 

PENDING 

The Mudder 

7300 

• IR-X ® Impact Exoskeleton protects 

against forceful blows to the back of hand 

• PVC coating provides a liquid-resistant 

barrier while providing enhanced grip 

• 17” extended gauntlet-style cuff 

Available in sizes 9/L through 11/XXL 




Impact 

Protection 

The Mudder 

7301 

• IR-X ® Impact Exoskeleton protects against 


The Mudder 

7302 

• IR-X ® Impact Exoskeleton protects against 






PENDING 

• 12” extended gauntlet-style cuff 

Available in sizes 9/L through 11/XXL 

PENDING 

• Knit cuff 


Impact 

Protection 

Impact 

Protection 

877.MYARMOR | hexarmor.com Liquid/Chemical-Resistant I Page 63

Waterproof Breathable Gloves with 

Technology 

No Wet. No Wind. No Sweat. 

HexDri ® by HexArmor ® provides the same protection from the elements you expect 

from rubber gloves, but keeps your hands comfortable because they’re breathable, too. 

Proprietary H3O ® technology used in HexDri ® work gloves keeps water and wind out 

of the glove and away from your hands, while the back-of-hand fabric simultaneously 

wicks away sweat and moisture from the inside of the glove. Available Fall 2014

Waterlogged 

Outer Layers 

Stiff Material 

Comprimises Dexterity 

Bulky Construction 

Traps Sweat and Heat 


COMING 

SOON! 

Say Goodbye HexDri to Soggy, Waterlogged Hand Protection 

® Gloves by HexArmor ® 

Standard with Waterproof H3O ® Technology Rubber Gloves 

Windproof 

Waterproof 

Stiff Material 

Comprimises Dexterity 

High Dexterity Design 


HexDri ® Gloves by HexArmor ® 

with H3O ® Technology 

Waterproof 

Releases 

Sweat and Heat 

The problem with most “waterproof” gloves is that 

they get their water barrier from a liner on the inside of 

the glove. So when the glove gets wet, the outer layer 

absorbs the liquid, making the glove bulky, heavy, and 

stretched out. This compromises grip and dexterity, 

making it hard to do your job. 

HexArmor ® created HexDri ® to solve this problem. 

Proprietary H3O ® technology used in HexDri ® work 

gloves keeps water and wind out of the glove and 

away from your hands, while the back-of-hand fabric 

simultaneously wicks away sweat and moisture 

from the inside of the glove. And the coated palm 

provides exceptional grip in wet environments, without 

sacrificing dexterity or tactile sensitivity. 

Windproof 

If you’re working in an environment with wet conditions, 

there’s only one series that is guaranteed to be “no wet, 

and no sweat.” It’s the HexDri ® with H3O ® technology, 

only from HexArmor ® . 

High Dexterity Design 

Releases 

Sweat and Heat 

HexDri ® 

2180 

• H3O ® technology keeps water and wind out 

of the glove and away from your hand 

• Breathable back-of-hand material 

allows sweat to evaporate 

• High dexterity, pre-curved design 




HexDri ® 

2182 

• H3O ® technology keeps water and wind out 

of the glove and away from your hand 

• Breathable back-of-hand material 

allows sweat to evaporate 

• High dexterity, pre-curved design 

• PVC palm dip 



Protected by European patent 2,173,206 and other patents pending 

877.MYARMOR | hexarmor.com HexDri ® I Page 65

Glove Sizing Guide 

Industrial gloves fit differently than most gloves, because of the materials used to provide protection. 

We recommend using our size charts and reviewing glove descriptions and materials, and if you are 

still uncertain about what size would best fit your hand, give us a call at 1-616-459-4144. 

Measure Your Hand (Recommended) 

Using a string or measuring tape, measure the circumference 

around the knuckles, excluding the thumb. Your hand should 

be open with the fingers together. Compare this measurement 

to the chart on the right to determine your glove size. 

Or, Place Your Hand on the Chart Below 

Hand Circumference 

HexArmor ® Size 

5 in. (12 cm) - 6 in. (15 cm) 5/XXS 

7 in. (18 cm) - 7 1/2 in. (19 cm) 6/XS 

7 1/2 in. (19 cm) - 8 in. (20 cm) 7/S 

8 in. (20 cm) - 8 1/2 in. (21 1/2 cm) 8/M 

8 in. (21 1/2 cm) - 9 in. (23 cm) 9/L 

9 in. (23 cm) - 10 in. (25 cm) 10/XL 

10 in. (25 cm) - 11 in. (28 cm) 11/XXL 

11 in. (28 cm) - 12 in. (30 cm) 12/3XL 

Place your right hand on the glove chart so that the 

saddle of your thumb and index finger line up with 

the X. The measurement closest to the right edge of 

your hand will be the appropriate glove size. 

Index Finger 

5/XXS 

6/XS 7/S 8/M 9/L 10/XL 11/XXL 12/3XL 

Thumb 

Chart Should Be 7 1/2 in. (19 cm)


NECK 

You may need to order one size larger when wearing arm guards over 

shirt sleeves, in which case we recommend measuring over your clothes. 

Having someone assist you will ensure accurate measurements. 

How to Measure 

SLEEVE 

CHEST 

Neck: Measure the circumference where a standard 

button-down type collar would be fastened. 

Bicep: Measure around the widest part, a few inches below the shoulder. 

GAITORS 

Chest: Measure the circumference at the fullest point, 

keeping the tape horizontal around the body. 

Sleeve length: Measure the distance from the prominent bone in the center on 

the back of the neck, across the shoulder, over the bent elbow, to the wristbone. 

BICEP 

SLEEVE 

CHEST 

WRIST 

CHAPS 

GAITORS 

NECK 

BICEP 

WRIST 

CHAPS 

Product 

AG8TW 

7/S 

Length 11.5” 

Wrist 8” 

Bicep 10” 

8/M 


Wrist 9” 

Bicep 19” 

9/L 

Product 

7/S 


10/XL 

8/M 


11/XXL 

9/L 

Length 14” 

12/3XL 

10/XL 

Length 11.5” Length 11.75” Length 12.5” Length 13.25” 

Wrist 9.5” 

Wrist 10” 

Wrist 11.5” n/a 

AG8TW 

Wrist 8” 

Wrist 9” 

Wrist 9.5” 

Wrist 10” 

Bicep 12.5” Bicep 14” 

Bicep 16.5” 

Bicep 10” 

Bicep 19” 

Bicep 12.5” Bicep 14” 

11/XXL 

Length 14” 

Wrist 11.5” 

Bicep 16.5” 

AG10009S, AG9X 


Wrist 9.5” 

Bicep 12.5” 

Length 12” Length 12.5” 



Length 12” 



Wrist 10.25” AG10009S, Wrist AG9X 11” Wrist 9.5” Wrist 12.25” Wrist 10.25” Wrist 13.5” Wrist 11” n/a 

Bicep 13.5” Bicep 14” Bicep 12.5” Bicep 16.5” Bicep 13.5” Bicep 17” Bicep 14” 


Wrist 12.25” 

Bicep 16.5” 


Wrist 13.5” 

Bicep 17” 

AS019S 


Wrist 8.25” 

Bicep 15.5” 

Length 21” 

Wrist 9” 

Bicep 16.5” 

Length 21.75” Length 20.5” Length 22.5” Length 21” Length 23” Length 21.75” Length Length 24.25” 22.5” 

AS019S Wrist 9.25” Wrist 8.25” Wrist 10.25” Wrist 9” Wrist 11.75” Wrist 9.25” Wrist Wrist 12.25” 10.25” 

Bicep 18” Bicep 15.5” Bicep 18.5” Bicep 16.5” Bicep 23” Bicep 18” Bicep Bicep 24.25” 18.5” 

Length 23” 

Wrist 11.75” 

Bicep 23” 

1010 


Wrist 7” 

Bicep 14.75” 

Length 18” 

Wrist 8.5” 

Bicep 16.5” 

Length 19” 

1010 

Wrist 9.5” 

Bicep 19“ 

Length 16.75” Length 18” 

Length 20” 

Wrist 7” 

Wrist 8.5” 

Wrist 10.75” n/a 

Bicep 14.75” Bicep 16.5” 

Bicep 20.5” 

Length 19” 

Wrist 9.5” 

Bicep 19“ 

n/a 

Length 20” 

Wrist 10.75” 

Bicep 20.5” 

n/a 

Chaps 

Gaitors 

HexJacket 

Inseam 20” 

Thigh 26” 

Ankle 24” 

n/a 

Neck 15” 

Chest 34-37” 

Sleeve 32” 

Inseam 22.5” 

Thigh 26” 

Ankle 24” 

Inseam 15” 

Calf 18” 

Ankle 18” 

Neck 16” 

Chest 38-41” 

Sleeve 33” 

Inseam 20” Inseam 22.5” Inseam 24.4” Inseam 26” 

Chaps Inseam 24.4” Thigh 26” Inseam 26” Thigh 26” Inseam Thigh 28” 26” Inseam Thigh 30” 30” 

Thigh 26” 

Ankle 24” 

Ankle 24” Thigh 30” Ankle 24” 

Ankle 26” 

Thigh 35” Ankle 24” 

Ankle 30” 

Thigh Ankle 38” 26” 

Ankle 34” 

Inseam 15” Inseam 17” Inseam 18” 

Gaitors 

Inseam 17” 

n/a 

Inseam 18” 

Calf 18” 

Inseam 

Calf 

19” 

20” 

Calf 22” 

Ankle 18” 

Ankle 20” 

Ankle 22” 

Calf 20” 

Calf 22” 

Calf 24” 

n/a 

Ankle 20” 

Ankle 22” 

Neck 15” 

Neck 16” 

Ankle 24” 

Neck 17” 

Neck 18” 

HexJacket Chest 34-37” Chest 38-41” Chest 42-45” Chest 46-49” 

Neck 17” Sleeve 32” Neck 18” Sleeve 33” Neck 19” Sleeve 34” Sleeve 35” 

Chest 42-45” 

Sleeve 34” 

Chest 46-49” 

Sleeve 35” 

Chest 50-54” 

Sleeve 36” 

n/a 

Inseam 28” 

Thigh 35” 

Ankle 30” 

Inseam 19” 

Calf 24” 

Ankle 24” 

Neck 19” 

Chest 50-54” 

Sleeve 36” 

877.MYARMOR | hexarmor.com Sizing Guide I Page 67

Cut Score Comparison 

As simple as the industry may try to make it sound, there 

remains an unsettling level of confusion in the cut-resistant 

glove market. With multiple 1-to-5 rating scales, a variety 

of acceptable or certified standards and methods, differing 

testing methods, and a slew of acronyms associated with the 

testing, safety managers may find themselves overwhelmed 

when sifting through potential cut-resistant PPE. 

But there is one thing that is met with general agreement 

in the hand-safety industry: not all cut-resistant gloves are 

created equal. With this in mind, it becomes vitally important 

that those making the PPE purchase decisions be fully 

informed on the cut-resistant products available to them. 

Here is what you need to know about cut testing standards 

and how they apply to your safety program: 

The United States Uses the ISEA/ 

ANSI-Accepted Standards, While 

Europe Uses the CEN Certification 

However, many gloves sold in North America will indicate both 

testing results. Keep in mind that the ISEA (International Safety 

Equipment Association)/ANSI (American National Standards 

Institute) is a committee of manufacturers and suppliers of 

safety equipment, as well as a group of standardization societies, 

which have established a standardized test for cut-resistant 

materials. On the other hand, the CE (Conformité Européenne) 

score of a glove is an actual certification, verifying a product 

has been properly tested, and the test results properly reported. 

Many manufacturers in North America will seek CE compliance, 

as it is required in Europe and other parts of the world. 

Cut Score Comparison 

ISEA/ANSI Accepts the ASTM 

Cut Test Standard, While the CE 

Certification Accepts the EN388 

and ISO Test Standards 

While both parties report cut resistance on a numerical scale from 

Level 1 to Level 5, there are differences in these scales. A glove 

with ISEA/ANSI Level 3 cut resistance may not necessarily test 

at Level 3 on the CE method. The reason for this difference in the 

rating scale is the difference in accepted testing methods: 

• The ASTM F1790 measures the weight in grams needed 

to cut through a material when applied to a razor blade, 

tested over a distance. Thus, each cut from 1 to 5 denotes 

a specific range of weight, in ascending order. 

• The EN388 Coup testing method is constructed much differently; 

it counts the rotations needed for a circular blade to cut through 

a material while moving laterally across the material under one 

constant weight. The count is indexed by use of a “control” fabric, 

such as standard cotton. This indexed value is then converted 

to a simple cut level, ranging from Level 1 to Level 5. 

• However, the EN388 Coup test is not recommended for materials 

with high levels of cut resistance, as these materials can easily 

dull the blade and skew the results. For CE Cut Levels of 4 and 5, 

an alternate test is proposed – the ISO 13997. Similar to the ASTM 

F1790, it measures the force needed to cut a material by way of 

a straight blade being moved across said material. The result is 

measured in newtons, which is directly translated to cut resistance. 

U.S. Standard 

ANSI/ISEA Levels 

CE-EN388 ISO 13997, Levels 4-5 

Resistance converted to Grams 

CE-EN388 Coup Test, Levels 1-3 

Approximate resistance converted to Grams 

Grams of Cut Resistance 

4500 

4000 

3500 

3000 

2500 

2000 

1500 

1000 

500 

0 

HexArmor ® 

Testing done through all materials on palm, including added patches. 

Bar represents minimum gram rating to achieve each level. 

More information on each 

of the tests listed can be found 

on these websites. 

• www.astm.org 

• www.iso.org 

• www.cen.eu 

Level 1 Level 2 Level 3 Level 4 Level 5

CPPT-ASTM-F1790 Test 

U.S. Standard 

Variable Load 

Linear Blade 

Movement 

Fabric Sample 

Conductive Strip 

Linear Blade 

Movement 

CPPT-ASTM-F1790 Test 

U.S. Standard 

Variable Load 

EN388-COUP Test 

European Standard 

Fabric Sample 


Rotating & Linear 

Blade Movement 

The ASTM Fixed F1790-97 Load Varies Slightly 

From the ASTM F1790-05 

Prior to 2004, a cut length of 25mm was required when performing 

Rotating & Linear 

the Blade test; Movement the specifications have since been updated to require only 

20mm. The update was made so that both the Tomodynamometer 

(TDM) and Cut Protection Performance Tester (CPPT) testing 

machines would be comparable. Be Fabric certain Sample when comparing data 

that the same test is used for each Conductive product Strip in the comparison. 

North American Manufacturers and 

Distributors Are Not Required to 

Certify Their Cut Resistance 

As the CE is the only certification-requiring body, vendors of 

safety gloves in North America are able to sell gloves without 

ever testing them for cut resistance. If they elect to test them for 

cut resistance, they are able to use any method they choose. 

Furthermore, the CE certification does not require the ISO 13997 

for highly cut-resistant materials, but only recommends it. As such, 

a manufacturer of PPE in North America could feasibly run the 

EN388 Coup test on a cut-resistant material and, due to the nature 

of the test, return dramatically inaccurate results that portray the 

material to be far more resistant to cuts than it is in actuality. 

It is extremely important to gather information both about 

the material used in PPE, as well as the methods by which 

it is tested, before continuing with a purchase decision. 

EN388-COUP Test 

European Standard 

Fixed Load 

Fabric Sample 


Test Results From 

Various Tests Are Not 

Easily Interchangeable 

Though many manufacturers will demonstrate 

the CE cut tests as a function of weight or 

force, this conversion is only a rough estimate 

of how the material will perform. Each test and 

testing standard is different in the way that 

it is performed and, thus, will only be loosely 

comparable by way of reporting results. 

The Employer Is Ultimately 

Responsible for Providing PPE 

That Meets Employees’ Needs 

Per OSHA regulations, the final burden of responsibility 

concerning cut resistance falls on the employer. Though testing 

regulations and certifications are a viable starting point for 

a purchase decision process, they are never to be taken as a 

validation of the inherent protection offered to an employee. 

Cut-Resistant PPE Manufacturers 

and Suppliers Can Provide Further 

Understanding of Cut Testing 

Ask questions and seek thorough explanations for the 

methods that they have selected to test their products. 

• Safety directors are encouraged to work with other industry 

professionals in analyzing the cut hazards in a given task, creating 

a practical testing method to verify the protection offered by PPE, 

and testing many different kinds of PPE in real-life situations. 

• Cut resistance does not always mean cut safety! Many 

products that resist blades will still subject employees to 

variably shaped sharp hazards, as well as lacerations that 

begin with a puncture. Testing a material against worksite 

hazards is vital to the success of a PPE program. 

877.MYARMOR | hexarmor.com Cut Testing I Page 69

Be Smart About PPE Testing 

What to Do When Evaluating Gloves 

Real-world applications are different from cut tests 

done in a lab. Even cut tests may vary by using 

different methods and producing different results. 

When people hear the words “cut and puncture 

resistant,” most will have a tendency to want to 

do their own informal testing. Often they will put 

the glove on a hard, flat surface and run a sharp 

instrument over the surface of the glove to test for 

cut resistance. We do not encourage customers to 

test in this manner. Although testing with a knife or 

other sharp object on a hard surface like a table may 

seem like a good testing method, in reality it is not 

and has little semblance to real-world applications. 

Each HexArmor ® product is unique, with unique cut, 

puncture, tear, and abrasion properties. We encourage 

testing using actual hazards in a manner that best 

represents real-world situations, WITHOUT anyone’s 

hand in the glove. If you have any questions about 

testing, or would like to talk to us about testing, 

please contact us. 

Abrasion resistance is also a critical factor 

in preventing hand injuries. In fact, if a glove 

fails too early due to wearing through from an 

abrasive hazard, the skin is quickly exposed to 

cut hazards. So the higher the abrasion level, 

the higher the level of protection from not just 

abrasion but from cut and punctures. 

Stability. Evaluate performance of a new glove 

versus a glove that has been worn for a day. 

Look for products that don’t degrade when 

exposed or used. Some products are affected 

when subject to abrasion, washed, or exposed 

to UV light. Many products on the market lack 

the ability to provide consistent performance. 

Windup, all occurrences. Some materials can be 

caught in machine parts such as rotating grinding 

wheels or drills and sanding materials. This can pull 

the hand or finger into the equipment and cause 

severe injury to tendons, muscles, and ligaments. 

Protective gloves that prevent or reduce windup risks 

are available and can be used where risks are present. 

Fit plays a part in the level of protection. Gloves that 

are too tight may cut easier because many of the 

fibers used for cut resistance use a rolling action to 

increase cut resistance. When these fibers cannot roll, 

such as when they are stretched from an ill-fitting or 

wrong-sized glove, they can “lose” some of their cut 

resistance. Take an example from the kitchen and do 

this simple experiment: Put a cucumber on a cutting 

board and take a very sharp knife. Try to cut the 

cucumber with a sawing motion without holding the 

cucumber. It just rolls and doesn’t cut. Now hold that 

cucumber and do the same thing. It cuts very easily. 

So, tight-fitting gloves can perform like the immobilized 

cucumber. Loose-fitting gloves can also be a hazard for 

catching or snagging on tools and equipment. Make 

sure your glove program accounts for proper sizing and 

employees know what to look for when picking gloves. 

Coating impacts cut-resistant gloves that use cutresistant 

fibers. Once the coating is applied, the 

rolling and twisting that helps the fiber achieve its 

cut resistance can be reduced. Most coated gloves 

have higher cut resistance on the back-of-hand than 

on the palm because the fibers are not coated. Keep 

this in mind as you select your hand protection. 

Grip is also important. Using grip that isn’t 

appropriate for the job can lead to higher injury rates 

as objects with sharp edges slip, causing injury.

Glove Care: Why Does It Matter? 

Improper glove care can shorten the life of your PPE. 

It can also lead to dermatitis, decreased dexterity, 

loss of protective abilities, and odor. Glove care 

refers not only to laundering, but also proper storage, 

routine glove checks, and knowledge of materials 

and their particular strengths and weaknesses. 

Because there are so many different work gloves on 

the market, experienced safety managers should be 

aware of what workers’ gloves are made of and how 

they will stand up to the applications they’re being used 

for. Common glove materials include nylon, spandex, 

leather, cotton, SuperFabric ® , Kevlar ® , and knit fibers. 

Each of these materials has a certain way it needs to 

be cared for, and oftentimes there is a blending of the 

materials, making proper care even more crucial. 

Proper storage: Gloves should be ideally 

stored in clean, dry conditions, away from 

direct sunlight and extreme temperatures. 

Routine glove checks: Glove life varies based on 

application, environment, and amount of use. 

Because of this, it is vital that you perform routine 

glove checks, ideally before going to work every day. 

Take note of areas that may have begun to wear 

down, such as loose Velcro ® , a worn-down nametag, 

lingering moisture, or a strong odor. Keeping an eye 

out for these issues and others keeps you one step 

further from a worksite hand injury, which is the 

ultimate goal of hand protection in the first place. 

30 

Wash with care 

Do not bleach 

Hang dry (indoors) 

Hand wash only 

Tumble dry low 

Line dry 

• Gloves marked “wash with care” are machine 

washable. The number inside the symbol denotes 

what temperature to wash the gloves at (e.g., 

machine wash with care at 30 degrees Celsius). 

Washing with care can be done by changing 

the machine cycle, using a different pre-set 

wash program (gentle/delicate), and being 

sure not to overload the washing machine. 

• When washing by hand it is important to use 

a soap and/or detergent that won’t irritate 

your skin. Also, be sure to wash gloves over 

a sink or outside, and rinse thoroughly. 

Companies who properly launder their gloves can 

increase lifespan by up to 300%. Laundering removes 

harmful chemicals, perspiration, and everyday grit and 

grime that can weaken protective fibers and seams. 

Our team of HexArmor ® solutions specialists are here 

to help you with this process, and they are more than 

happy to provide you with all the information you need. 

Care and content: Our C&C tag, which indicates 

washing instructions and fiber content, is 

located on the inside cuff of all our gloves. 

877.MYARMOR | hexarmor.com Glove Care I Page 71

Call 1-877-MY ARMOR or visit hexarmor.com 

HexArmor ® products are cut and puncture resistant, NOT CUT AND PUNCTURE PROOF. Do not 

use with moving or serrated blades or tools. User shall be exclusively responsible to assess 

the suitability of the product as specified for any individual application or use. Protection 

zones are to be used as a general guide. Actual product protection zones may differ. 

Protected by patents and patents pending. SuperFabric ® is a registered trademark of HDM, Inc. 

© Copyright 2014 HexArmor ® . All rights reserved. 

All products, product descriptions, and performance scores are current as of April 2014. 

For current product information, please visit hexarmor.com, or call 1-877-MY ARMOR. 

HC-0014

HEX ARMOR HAND PROTECTION

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?